Need help in basic pay retrival

hi frends,
how to retrieve the data from BASIC PAY(infotype 0008)?????????????
need it urgently

Hi
use the code
form get_pay_data.
Get the Payroll data from Respective Infotypes
  rp_provide_from_last p0008 space pnpbegda pnpendda.
  pay_tab-pernr    = pernr-pernr.
  call function 'RP_FILL_WAGE_TYPE_TABLE_EXT'
    exporting
     appli                              = 'E'
     begda                              = p0008-begda
     endda                              = p0008-endda
     infty                              = '0008'
     objps                              = '  '
     tclas                              = 'A'
     pernr                              = pernr-pernr
     seqnr                              = '   '
     subty                              = '0   '
     dlspl                              = 'X'
     msgflg                             = ''
     nordct                             = ''
    tables
      pp0001                             = p0001
      pp0007                             = p0007
      pp0008                             = p0008
      ppbwla                             = wage_tab
  PP0230                             =
  PP0014                             =
  PP0015                             =
  PP0052                             =
EXCEPTIONS
  ERROR_AT_INDIRECT_EVALUATION       = 1
  OTHERS                             = 2
  if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
  endif.
  loop at wage_tab.
    pay_tab-waers = wage_tab-waers.
    case wage_tab-lgart.
      when c_lga01.
        pay_tab-basic = wage_tab-betrg.
      when c_lga02.
        pay_tab-sup_allow = wage_tab-betrg.
      when c_lga03.
        pay_tab-hra_allow = wage_tab-betrg.
      when c_lga04.
        pay_tab-chl_allow = wage_tab-betrg.
      when c_lga05.
        pay_tab-soc_allow = wage_tab-betrg.
      when c_lga06.
        pay_tab-fix_allow = wage_tab-betrg.
      when c_lga07.
        pay_tab-ra_allow = wage_tab-betrg.
      when c_lga08.
        pay_tab-per_allow = wage_tab-betrg.
      when c_lga09.
        pay_tab-pen_allow = wage_tab-betrg.
      when others.
        pay_tab-oth_allow = pay_tab-oth_allow + wage_tab-betrg.
    endcase.
    pay_tab-tot_allow = pay_tab-basic + pay_tab-sup_allow +
                        pay_tab-hra_allow + pay_tab-chl_allow +
                        pay_tab-soc_allow + pay_tab-fix_allow +
                        pay_tab-ra_allow + pay_tab-per_allow +
                        pay_tab-oth_allow - pay_tab-pen_allow.
  endloop.
  append pay_tab.
  clear  pay_tab.
endform.          "get_pay_data
Reward points if useful
Regards
Anji

Similar Messages

  • Need help willing to pay NOW deadline!!!

    Please email me here:
    [email protected]
    I need help NOW... We have a very serious deadline. I need a 20 min phone consultation from anyone out there that really knows. Final cut. Our aspect ratio is all messed up and we can not fix it. Please email breif credentials and we wil reply with phone number and cash thru PayPal.
    Thx, Alex

    Well no one wants to call me so here goes: We have two sequences, a demo reel of our special effects (from multi artist) and our doc demo reel. The SE demo reel was squished tall every time we exported to QT. So we had one of our employees fix it by making it extra wide to compensate. Now when we export the SE demo reel is fine but the doc demo reel is exporting too wide now. It is as if the setting for the SE demo reel aspect ratio settings have changed everything including the doc demo reel. These export options are driving us crazy, we can't seem to get this thing back the way it was. I suppose we could change every clip's aspect ratio by hand to compensate for the stretching wide, in other words squish it tall again to make it come out right. The who originally changed the aspect ratio to fix the first problem with the SE Demo changed everything to 33.33 but we can not figure out what it original was before they went in and changed each clip of the SE Demo. Confusing I know... Please help we have to have these overnighted by 5PM today!!! Can any one save us? Thanks, Alex

  • New to Photoshop (CS4Ext) and need help with basic loading of images to new folder.

    Just purchased CS4Ext and installed it. It's not showing up on my desktop as a quick entry icon. I want to simply load images from a portable hard drive (USB) to a new folder in photoshop so I can review them and begin to select  and separate out some of interest to manipulate  and share or get ready to print. It 's the most basic help one can need butI'm jut not clear on the workflow steps . Would appreciate someone walking me through the steps .
    Thanks much

    drmjp2 wrote:
    Just purchased CS4Ext and installed it. It's not showing up on my desktop as a quick entry icon.
    Let's see…   First of all, this is the Photoshop Macintosh forum.  Installed applications never, ever show up on your desktop as a "quick entry" icon on a Mac.  Are you on a Windows PC maybe?
    drmjp2 wrote:
    I want to simply load images from a portable hard drive (USB) to a new folder in photoshop so I can review them and begin to select  and separate out some of interest to manipulate  and share or get ready to print.
    Just select them with your mouse in the Finder and drag-copy them into the new folder.  Done.

  • Need help plz - basic pull down lever, to make a "slot Machine run"

    Hey there,
    Im trying to create a lever to activate my "slot machine" run. I want to make just a very very basic pull down lever, that when pulled down far enough, and if released will start the run. i guess i have to use the y = some where in there but just really lost don't no were to even start this. the pull down will obviously need to only pull part of the level (top part, down) but keep the main lever in place...rly lost..any help or tips will be much appriciated!
    thx pavel

    Quote
    the 20pin connector on the power supply has about 4 pins where the pastic shell has browned from heat or something
    This is not a good sign, this could be an indication of to much amp being drawed.
    This could be due to a poor connection on the P/S connector or the connector of the MB or it could be due to a device like your CPU, ram, graphic card or so on drawing to much amps.
    Check the MB for any signs of swelled, leaking or bursted caps, also look around the MB P/S connector for any resistors that have changed colors or are burnt.

  • 100% Noob - Need Help for basic setup of Cisco 2504 and 1600 AP

    Hello,
    I am completely noob in (cisco) networking.
    I have to setup a basic but secure wireless network.
    I have a cisco 2504 and 2 APs 1600 + a random switch
    I have 4 ports on the controller.
    I want to keep the 1st port on the network for the controller management, plug my internet box on the 3rd port, and my switch on the 4th port. Then the AP will be on the switch.
    I am able to make something working when everythings are plugged on the switch, plugged in the first port (default management port).But this is not what I want.
    First thing, Is that possible ?
    1st port : office network
    2nd port : empty
    3rd port : Internet Box
    4th port : Switch + all APs
    Then, if that is possible, how should i configure the controller to make that work ? I am completely lost in the menus.
    I dont need a perfect configuration, just something simple and working.
    1 SSID, 10 DHCP addresses, block wireless users trying  to go on the office network.
    If anyone could help my doing that, It would be very nice.
    Thank you.

    You basically need two SSIDs one for corporate users and second for guests .check the link with  step by step config and brief details .
    http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/70937-guest-internal-wlan.html

  • Need Help With Basics of SQL

    Hey I'm trying to get a working understanding of some of the basics behind SQL, I've composed a few questions that I think may help me with this. Anyone that can help me with any of them will greatly help me thanks.
    1. How to create synonym for tables?
    2. How to describe the structure of tables?
    3. How to list the contents of tables?
    4. How to create a table named with the same structure as another table?
    5. How to copy rows with less than a certain criteria in value (e.g. Price<$5.00) into another table?
    6. How to change the data type to e.g. NUMBER(6)?
    7. How to add a new column named with data type e.g. VARCHAR2(10)?
    8. How to change a specific field within a table (e.g. For ORDER_NUMBER 12489, change the C_NUMBER to 315)?
    9. How to delete a specific row from a table?
    10. How to declare a column as the primary key of a table and call it e.g. PK_something?
    11. How to show certain columns when another column is less than a certain criteria in value (e.g. Price<$5.00)?
    12. How to show certain columns with another column having a certain item class e.g. HW or AP?
    13. How to list certain columns when another column e.g. price is between two values?
    14. How to list certain columns when another column e.g. price is negative?
    15. How to use the IN operator to find certain columns (e.g. first and last name of customers who are serviced by a certain ID)
    16. How to find certain columns when one of the columns begins with a particular letter (e.g. A)
    18. How to list the contents of the a table sorted in ascending order of item class and, within each item class, sorted in descending order of e.g. price?
    19. How to do a count of column in a table?
    20. How to sum a column and make rename is something?
    21. How to do a count of a column in a table (without repeats e.g. if a certain number repeats more than once than to only count it once)?
    22. How to use a subquery to find certain fields in columns when the another column’s fields values are greater than e.g. its average price?

    848290 wrote:
    Hey I'm trying to get a working understanding of some of the basics behind SQL, I've composed a few questions that I think may help me with this. Anyone that can help me with any of them will greatly help me thanks.To use the terminology you have in those questions, you must already have a basic understanding of SQL, so you have exposed yourself as not being the author of such questions.
    Please do not ask homework questions without having at least attempted to answer them yourself first and show where you're struggling.

  • Need help with basic program - I am new to this

    I need to write a very basic code to display my name on the screen as follows
    RR OOO
    R R O O
    R R O O
    RR O O
    R R O O
    R R OOO etc etc etc
    to spell out robert
    i have no idea where to begin

    You need to store the patterns for each letter of the alphabet somewhere - say in an array. You can then read out the patterns to build up strings.
    For example:String[][][] letters = new String[][]
    { {"A", "  A  " ... },
      { "R", "RRRR", "R    R", "R    R", "RRRR", "R    R", "R    R"},
    }

  • Need help with basic "for" loops!

    Here is my prompt for class:
    Write a program that prompts the user to enter a sentence from the keyboard using JOptionPane.showInputDialog.
    The program will print the characters back with the first letter of each word changed from lower case into upper case. If you have a capital letter in the original line and it is not the first letter of a word, then this letter should be switched from upper case to lower case. The only capital letters that should appear in the line must be the beginning letter of every word in the line. All other characters will remain the same.
    I figured everything out except for one part. How do I make the first letter of each word change from lower case into uppercase? How do I switch a letter that is uppercase in the middle of a word to lowercase? Last but not least, how do I make sure that the only capital letters in the sentence are the first letter of each word?
    I need to do this using for Loops, charAt(), and if/else statements because this is just an intro class. I just can't figure this last part out! Help please!

    String words = ...;
    StringBuilder builder = new StringBuilder();
    for (int i = 0; i < words.length; i++) {
    char c = words.charAt(i);
    boolean isUpper = Character.?(look up the methods in java.lang.Character)
    boolean isLetter = ? (there are actually 2 ways to do this. Hint: you can use <= and >= and && to solve this)
    if (!isLetter) {
    continue;
    } else {
    // check if this is the start of the word. How do you know that you are at the start of a word?
    if (!isUpper && isStartOfTheWord) c = Character.toUpperCase(c); //Hint: there is a way you can do this with x + y
    else if (isUpper) //make c lower case
    builder.append(c);
    return builder.toString();

  • Raw recruit needs help with basic thumbnail

    I have searched the help files and the discussion
    groups and cannot find a reference to the creation of a thumbnail.
    Therefore, I am confident everyone in the world but me knows how to
    do that. But I need a thumbnail! How do I make or get or find or
    create a thumbnail from a jpeg? Thanks ... Steve

    steve63118 wrote:
    >
    I have searched the help files and the discussion
    groups and cannot
    > find a reference to the creation of a thumbnail.
    Therefore, I am confident
    > everyone in the world but me knows how to do that. But I
    need a thumbnail! How
    > do I make or get or find or create a thumbnail from a
    jpeg? Thanks ... Steve
    Just resize a copy of the image. Modify > Transform >
    Numeric Transform.
    Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
    http://www.projectseven.com
    Fireworks Newsgroup:
    news://forums.projectseven.com/fireworks/
    CSS Newsgroup: news://forums.projectseven.com/css/
    Design Aid Kits:
    http://www.webdevbiz.com/pwf/index.cfm

  • Need help for basics of knowledge management

    HI all,
    Could anyone please give me soem links for the basics of knowledge managemenf.
    Regards,
    Sarbjeet Singh

    check the KM functionalities in the below links
    http://help.sap.com/saphelp_nw70/helpdata/EN/4c/9d953fc405330ee10000000a114084/frameset.htm
    http://www7.sap.com/belux/platform/netweaver/enterpriseportal/pdf/50058417_Knowledge_Management.pdf
    https://www.sdn.sap.com/irj/sdn/km-elearning
    Raghu

  • ACE - need help implementing basic parameter map

    Hi,
    I'm trying to implement a connection parameter on an ACE module that sumply sets the TCP timeout to 0.
    I can get this to work fine if I permit all TCP traffic in the class-map, but it doesn't work if I use an ACL;
    >>Match all TCP;
    parameter-map type connection TCP-Timeout
    set timeout inactivity 0
    class-map match-all TCP-Timeout-Out-Class
    2 match port tcp any
    class-map match-all TCP-Timeout-in-Class
    2 match port tcp any
    policy-map multi-match TCP-Timeout-Out-Policy
    class TCP-Timeout-Out-Class
    connection advanced-options TCP-Timeout
    policy-map multi-match TCP-Timeout-in-Policy
    class TCP-Timeout-in-Class
    connection advanced-options TCP-Timeout
    Interface vlan 920
    service-policy input TCP-Timeout-in-Policy
    Interface vlan 923
    service-policy input TCP-Timeout-Out-Policy
    >>Match ACL;
    access-list TCP-Timeout-Group-Out line 10 extended permit ip 10.221.178.0 0.0.0.255 any
    access-list TCP-Timeout-Group-in line 10 extended permit ip any 10.221.178.0 0.0.0.255
    parameter-map type connection TCP-Timeout
    set timeout inactivity 0
    class-map match-all TCP-Timeout-Out-Class
    match access-list TCP-Timeout-Group-Out
    class-map match-all TCP-Timeout-in-Class
    match access-list TCP-Timeout-Group-in
    policy-map multi-match TCP-Timeout-Out-Policy
    class TCP-Timeout-Out-Class
    connection advanced-options TCP-Timeout
    policy-map multi-match TCP-Timeout-in-Policy
    class TCP-Timeout-in-Class
    connection advanced-options TCP-Timeout
    Interface vlan 320
    service-policy input TCP-Timeout-in-Policy
    Interface vlan 323
    service-policy input TCP-Timeout-Out-Policy
    Any ideas?
    Many Thanks

    Try changing the class-map from "type match-all" to "type match-any". Match all implies both statments need to be true. The match-any is probably what you want. Either of the ACL statements can be true.
    Also try to apply the policy globally instead of the interfaces, simplifying the config might help as well.
    e.g.:
    access-list TCP-Timeout-Group line 10 extended permit ip 10.221.178.0 0.0.0.255 any
    access-list TCP-Timeout-Group line 20 extended permit ip any 10.221.178.0 0.0.0.255
    class-map match-any TCP-Timeout-Class
    match access-list TCP-Timeout-Group
    parameter-map type connection TCP-Parameter-Map
    set timeout inactivity 0
    policy-map multi-match TCP-Timeout-Out-Policy
    class TCP-Timeout-Out-Class
    connection advanced-options TCP-Parameter-Map
    service policy input TCP-Timeout-Out-Policy <- apply it globally
    Hope it helps.
    Roble

  • Really need help with basic static forms?!?!

    I was thrown into creating forms for our Business Managers and I am not a developer in any way!  I am a Recruiter, but somewhat tech savvy (or at least I thought I was). 
    I am trying to create basic static forms.  I started by using Adobe Professional and them moved to LiveCycle Designer because of what I thought were better "editable" options when creating the form.  I want to be able to send my manager's forms via e-mail (PDF), they can enter the requesting information in the fields, save a copy for themselves, print, and e-mail to me.  We are not using any of the Adobe Server things, I don't want them to submit via an e-mail button on the form.  We are a non-profit organization and my managers are using all different versions of reader. 
    I am getting extremely frustrated because in testing the form everything seems to be working properly including tab order, print, save and everything I want it to do.  Then, I send them out for my managers to use, for some Manager's they work great, no problems at all!  But then, I keep getting these weird issues from different Managers with the same form.  For one of them, what they typed in the field, now looks like it's behind the text box, like when you select Highlight all, you can see what he typed, but then if you click into the text box, you can see what he typed. Another Manager said, two (crucial) fields would not show the text entered when she tries to save or print, but on screen you can see it????
    So after the rambling, I guess my questions are: should I be using Live Cycle to create such basic forms or should I be using Adobe?  Can anyone recommend a good "FOR DUMMIES" book that will help me figure out what I am doing wrong, and not explain in "IT" language?
    This is really getting embarrassing!! Any help would be greatly appreciated!!!!

    1. Make sure to set the PDF target version. Goto File -> Form Properties (see the first screenshot attached)
         Find out the minimum Reader version used in your organization and set this value accordingly. If you are not sure, select the least recent version.
    2. two (crucial) fields would not show the text entered when she tries to save or print, but on screen you can see it
         This may be due to the visibility settings of the fields. Just make sure that you have selected visible instead of visible (screen only)
         See the second screenshot attached
    Hope this may help you.
    Nith

  • Need help on basic topics

    Hi Experts,
    I am new bee to HFM and just started working on it. I have some basic doubts, could you please someone help me on this.
    I have passed some ICP entries, but could not able to view eliminated amount in Plug a/c. There is no issue with entries or anyother problem with entries. I am only able to see, what I have entered (amount) in ICP transaction, aginst the entities. I think I am doing some error with POV setting, pls help me in detail how to arrange the POV to view the eliminated balance in plug a/c and adjusted amount after elimination.
    Please also help me on understanding the below tems.
    1. What is System Accounts?
    2. What is Performance Management?
    3. what is dynamic calculation?
    4. Can we use two different HFM applications for one POV?
    5. What are FDQM Reports?
    6. I want to use Average Rates and Closing Rates for some Balance Sheet a/c, how can I achieve this?
    7. Ownership doubt.
    Ex: Till March it was JV (50-50), then from it changed to Subsidiary (60-40), then how this will effect in Consolidation
    process?
    8. What is ODI Reports?
    Regards,
    Santhosh

    Hi ,
    please refer the below link.
    http://docs.oracle.com/cd/E10530_01/doc/epm.931/hfm_user.pdf
    also look into this as well and search for your particular topics.
    http://docs.oracle.com/cd/E12825_01/nav/portal_1.htm
    Thanks,
    KKT
    Please mark answers as helpful or correct for others to find easily

  • Need help with basic Java programming

    I'm having a little bit of trouble with my code. For the sake of argument, I've removed the code I'm having trouble with, because I know it was inaccurate. I'm trying to create a loop so that this program will keep going through and through until the user enters an invalid variable. I thought the default after the case statements was supposed to make the system exit and output my message. Those two problems, the loop and the default, are what I'm really having problems with. My code is posted below.
    import javax.swing.JOptionPane;
    import java.util.Locale;
    import java.text.NumberFormat;
    public class Retail
    public static void main(String args[])
    String firstNum;
    String secondNum;
    String result;
    int prodNum;      //first number to input
    double quantity; //second number to input
    double total = 0.0;     //total of Prod * Quantity Sold for all items
    // To use American Dollar
    NumberFormat moneyFormat = NumberFormat.getCurrencyInstance( Locale.US );
    // first number entered as string
    firstNum = JOptionPane.showInputDialog( "Enter product number 1-5" );
    // second number entered as string
    secondNum = JOptionPane.showInputDialog( " Enter quantity of items sold" );
    // convert values to type double or int from type string
    prodNum = Integer.parseInt( firstNum );
    quantity = Double.parseDouble( secondNum);
    result="";
    if ( prodNum >=1 && prodNum <=5 ) {
    switch (prodNum)
    case 1: // 1st product
    total = 2.98 * quantity;
    break;
    case 2: // 2nd product
    total = 4.50 * quantity;
    break;
    case 3: // 3rd product
    total = 9.98 * quantity;
    break;
    case 4: //4th product
    total = 4.49 * quantity;
    break;
    case 5:
    total = 6.87 * quantity;
    break;
    default: JOptionPane.showMessageDialog( null, "Wrong product number entered" );
    JOptionPane.showMessageDialog( null, moneyFormat.format(total), "Total Price of Items Purchased", JOptionPane.INFORMATION_MESSAGE );
    System.exit(0);
    ***I know I need to put something in the user input message to state that any value other than 1-5 entered will cause the program to skip to the output, I'll put that in later.***

    When you post code, please use [code] and [/code] tags as described in Formatting Help on the message entry page. It makes it much easier to read and prevents accidental markup from array indices like [i].

  • Sooo..I need help (willing to pay)

    I need some photoshopping done for me, very BIG issue...Im willing to pay a fair amount...
    I dont know if you can PM on this thing..or if you could email me on [email protected] that would be awesome

    GDC1988 wrote: are you kidding? not one person wants to make some dosh?
    It's only 11 minutes since you first asked the question

Maybe you are looking for