Need help in creating script for "Task Schedule" in Oracle E-Bussiness Suit

Hi,
I need some urgent help regarding the scripting of Oracle E-Business Suite application. I am new towards working on Oracle Applications. I have been using LoadRunner 11.0 and protocol oracle applications 11i for the scripting of the application. The problem is as follows:
Scenario- Schedule an incident to a resource.
1) Log in to the application.
2) Open Oracle Forms Page.
3) Enter the details of the incident number.
4) Right click on the incident number and then select “schedule” option.
5) Check / Select the resource listed in the new form.
6) Click on “schedule” Button.
7) Exit the oracle forms.
8) Logout from the application.
I have recorded the scenario but when I try to run the script, it fails after completing the 4th step from the scenario mentioned above. I have done all the required co-relations..
Another issue that I have noticed in the scipt is that it records a lot of requests to the AppsTCFServer.
When I check the Tree View of the script, I have found that there are around 25 requests to the AppsTCFServer recorded in the script. In the header of these requests a TCF Start/Session number gets generated randomly. This number stays the same in few AppsTCFServer request headers and then a new number gets generated and the cycle continues.
However LoadRunner does not generate this number by itself during replay. I cannot find this number in any previous responses.
In the last few days, I have tried my hands on Oracle Openscript tool to record the above scenario, but still I am getting the same problem, i.e instead of getting the correct response from the server for the AppsTCFServer requests, I am getting the message "X-session 7098.... not found - aborting ".
I get this message whether I use LoadRunner tool or the OpenScript tool.
Please help me solve this issue.
Thanks & Regards,
Soumya Mukherjee

This isn't much of a "code-sharing" site but a "knowledge-sharing" site. Code posted me may be from a questioner who has a problem / issue / error with his code. But we don't generally see people writing entire scripts as responses to such questions as yours. There may be other sites where you can get coding done "for free".
What you could do is to write some of the code and test it and, if and when it fails / errors, post it for members to make suggestions.
But the expectation here is for you to write your own code.
Hemant K Chitale

Similar Messages

Need help in creating prompt for Month To Date Report.

Hi All I need to create a Month To Date Report using month(Start date & End date) as prompts, By default it has to run on the previous month data or if user selects his own range of dates then it has to bring the data for that range of dates ,one more thing is i am not showing the month and date columns on the report.Can any one help me how to create prompt for this in DeskI XIR2

Could you clarify some things? You are saying you are trying to transform the xml output of a webservice with an xsd, but an xsd is a schema that describes the allowed format of a xml file. If you want to transform xml from one format to an other (from one xsd to an other) you have to use a xsl file. You can make and test this with JDeveloper. Are you calling the webservice from esb or bpel?
Kind Regards,
Andre

Need help in creating documents for Contacts in Oracle HRMS

We are trying to add documents to Contacts in Oracle HRMS. (11.5.10.2)
Navigation: Oracle HR Super User -> Fastpath -> Documents of Record
Search for a Contact -> Manage Documents of Record -> Create Document of Record.
In Document Information -> Type is mandatory field but the LOV is not returning any values.
The LOV works fine for both system defined and custom document types when trying to create documents for Employees or External Contractors.
But we would need to be able to add documents for Contacts also.
Please let us know if this expected functionality or if there is any setup that is needed.
Any help in this regard is highly appreciated.
Thanks,
Kiranmayi.

We are trying to add documents to Contacts in Oracle HRMS. (11.5.10.2)
Navigation: Oracle HR Super User -> Fastpath -> Documents of Record
Search for a Contact -> Manage Documents of Record -> Create Document of Record.
In Document Information -> Type is mandatory field but the LOV is not returning any values.
The LOV works fine for both system defined and custom document types when trying to create documents for Employees or External Contractors.
But we would need to be able to add documents for Contacts also.
Please let us know if this expected functionality or if there is any setup that is needed.
Any help in this regard is highly appreciated.
Thanks,
Kiranmayi.

Need help on Creating YTD for a month variable in WEBi...

Dear Experts,
I am using BO4.1. I am creating a WEBi report where I have a month variable which shows months in the below format
I need to create YTD for the year ...Please help me .. this has to be displayed in chart.. So using the sum(No.Of.Ans ) doesnt work in chart.
Please suggest any other ideas...

Hi Bala,
Create a variable at universe level,and assigned table must be the table from which you are getting month.
Now take the object "YTD" into second query
Merge the Month object and YTD object
Create a variable for balance,
=If [month]="YTD" then sum([balance]) else [balance]
Noe you will get the required output as your requirement,
Regards,
Samatha B

Hi I need help in creating role for DEVELOPERS and HCM GUYS in ERP DEV. sys

Hi Experts
I am working as a Support Security Consultant. Now I have assigned to another implemenation Project.
My client asks to create 2 roles in DEV. system the requirement is:
1) He asks to create a role for develpoers in dev system fro devepment activities ( report creation, screen creation..etc..) and these people don't modify the HR related tables
2) He asks to create role for HCM guys in development system to work on HCM Configuration and to work on HCM areas but these people should not involve into develpometn activites
My questions is what are the tcodes we have to maintain in the roles to reach his requirement.
I asked the same thing to my Client he doesn' t provide any information
Please anyone help me on this
Thanks
Naresh

Hi,
for the first query please check auth object -Authorization Object S_TABU_DIS (Table Maintenance)
http://help.sap.com/saphelp_nw04s/helpdata/en/1e/e867408cd59b0ae10000000a155106/content.htm
No Worries
KG

Need help in Creating classes for my assignment

Hi ,
I just started learning Java and have the following requirement
1)     Create the following classes/interfaces using descriptions:
a)     Account � data members : id:String, type:String, balance:BigDecimal, methods : Account, Account with String parameter, getId, getType, getBalance, setId, setType, setBalance, deposit, withdraw, compareTo, toString
b)     Bank � data members: instance:Bank, accountsMap:Map, customersMap:Map, customersAccount:Map, transactionMap:Map, methods: getAccountsMap, getCustormersMap, getCustomersAccounts, getTransactionMap, associate, addTransaction, getAccount, getCustomer, getAccounts, getTransactions, deposit, withdraw, transfer
c)     AccountDoesNotExistException, BankException, CustomerDoesNotExistException, InsufficientFundsException, InvalidAmountException, ZeroAmountException
2)     Create the util package using the following class
a)     AmountConverter � methods: fromDecimal(BigDecim     al), fromString(String)
In 1 b how to Create Instance:bank in the class .Also how to do part2.If possible can you help me with all the parts.Based on these I've some more to do.

Here is what I've come with
ACCOUNT.JAVA
import java.math.*;
public class Account {
private String Id;
private String Type;
private BigDecimal balance;
public Account( ) {
public Account(String Id,String Type,BigInteger balance) {
this.Id = Id;
this.Type = Type;
this.balance = balance;
public String getId( ) {
return Id;
public void setId(String Id) {
this.Id = Id;
public String getType( ) {
return Type;
public void setType(String Title) {
this.Title = Type;
public String getBalance( ) {
return id;
public void setBalance(String balance) {
this.balance = balance;
public String withdraw( ) {
public String deposit( ) {
public void setLastName(String LastName) {
this.id = id;
CUSTOMER.JAVA
public class Customer {
private String Id;
private String Title;
private String firstName;
private String lastName;
/** Construct a Customer with no data -- must be a no-argument */
public Customer( ) {
/** Construct a Customer with String Parameter */
public Customer(String Id,String Title,String firstName,String lastName) {
this.Id = Id;
this.Title = Title;
this.firstName = firstName;
this.lastName = lastName;
/** Return the Id. */
public String getId( ) {
return Id;
/** Set the Id */
public void setId(String Id) {
this.Id = Id;
/** Return the Title */
public String getTitle( ) {
return Title;
/** Set the Title */
public void setTitle(String Title) {
this.Title = Title;
/** Return the Firstname. */
public String getFirstName( ) {
return id;
/** Set the Firstname. */
public void setFirstName(String FirstName) {
this.id = id;
/** Return the Lastname. */
public String getLastName( ) {
return LastName;
/** Set the Lastname. */
public void setLastName(String LastName) {
this.id = id;
TRANSRECORD.JAVA
import java.util.*;
import java.math.*;
public class TransRecord implements Comparable{
private Date timeStamp;
private String transType;
private BigDecimal transAmt;
/** Construct a Trans Record with no data -- must be a no-argument */
public TransRecord( ) {
/** Construct a Customer with String Parameter */
public Customer(String transType,String transAmt) {
this.transType = transType;
this.transAmt = transAmt;
/** Return the timeStamp. */
public String gettimeStamp( ) {
return timeStamp;
/** Set the timeStamp */
public void settimeStamp(Date timeStamp) {
this.timeStamp = timeStamp;
/** Return the TransType */
public String getTransType( ) {
return TransType;
/** Set the TransType */
public void setTransType(String TransType) {
this.TransType = TransType;
/** Return the TransAmt */
public String getTransAmt( ) {
return TransAmt;
/** Set the TransAmt */
public void setTransAmt(String TransAmt) {
this.TransAmt = TransAmt;
/** Return a String representation. */
public String toString( ) {
/** CompareTo method */
public int compareTo(Object argument)
===============
ACCOUNTDOESNOTEXISTEXCEPTION.JAVA
public class AccountDoesNotExistException
               extends Exception
     public AccountDoesNotExistException()
          super();
     public AccountDoesNotExistException(String message)
          super(message);
=================
BANKEXCEPTION.JAVA
public class BankException
               extends Exception
     public BankException()
          super();
     public BankException(String message)
          super(message);
CUSTOMERDOESNOTEXISTEXCEPTION.JAVA
public class CustomerDoesNotExistException
               extends Exception
     public CustomerDoesNotExistException()
          super();
     public CustomerDoesNotExistException(String message)
          super(message);
ACCOUNTDOESNOTEXISTEXCEPTION.JAVA
public class AccountDoesNotExistException
               extends Exception
     public AccountDoesNotExistException()
          super();
     public AccountDoesNotExistException(String message)
          super(message);
INSUFFICIENTFUNDSEXCEPTION.JAVA
public class InsufficientFundsException
               extends Exception
     public InsufficientFundsException()
          super();
     public InsufficientFundsException(String message)
          super(message);
INVALIDAMOUNTEXCEPTION.JAVA
public class InvalidAmountException
               extends Exception
     public InvalidAmountException()
          super();
     public InvalidAmountException(String message)
          super(message);
ZEROAMOUNTEXCEPTION.JAVA
public class ZeroAmountException
               extends Exception
     public ZeroAmountException()
          super();
     public ZeroAmountException(String message)
          super(message);
I need help with Bank Class and the util class.Correct me If I've missed any exceptions or if any syntax is wrong
THanks
AKsh

Need help in shutdown primary for maintaince (new to oracle dba)

Hi,
BANNER
Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
PL/SQL Release 9.2.0.4.0 - Production
CORE 9.2.0.3.0 Production
TNS for Linux: Version 9.2.0.4.0 - Production
NLSRTL Version 9.2.0.4.0 - Production
actually we have primary database server and the physical standby server with protection mode is maxperformance and for maintaince we need to shutdown primary server so what are the steps i need to follow since my primary database is configured with DATAGAURD and i would like to follow the folllowing steps please advice me:
to shutdown standby server:
from primary server connecting to dgmgrl
dgmgrl>DISABLE SITE standby_site1;
then connecting to standby server
sql>alter database recover managed standby database cancel;
sql>shu immediate;
and finnaly connecting to primary server
sql>shu immediate
is it right since i am new to datagaurd concept need help.
Regards
Prakash

You can do so, but you would shutdown the whole standby environment. But normally standby is used to have no or only short downtime. So a switchover to the standby DB is performed (after this standby is now running as primary), maintenance is done on the primary and then at the end another switchover back from the 'new' primary to the 'old' primary.
Werner

Need help with easy script for open / close app and move files

Hi,
I'm not a scripter.. never done anything special perhaps more complicated than /shutdown -s on cmd..
I actually learned ASCII C language on university but never used it in real.
I'm trying to create a basic script that perhaps you could help me or guide me how to do it..
The commands are
1) Close a running app (end task it or force kill it, I prefer end task it)
2) delete files from x location
3) run .exe app from y location
4) close that running app
5) move files from z to y
Perhaps adding few "wait few seconds" commands in between each, so the apps will launch successfully..
My first question will be whats the easiest script language to do that?
I tried VBScript but couldn't find commands for open or close apps.. also for controlling files..
And what commands can do that? I could google them up for better understanding no need for rough guide
And lastly, does it too hard? If it takes more than hour to make it (learn and process) than it ain't worth it..
Thanks alot ahead!
Jordan.

hmm 2 questions:
1) taskkill.exe causing me access deny error.. I used "taskkill.exe /IM softwarename.exe"
how do I get permission or something to fix that?
2) on the "move" command..
First, its a "copy" instead.. but I easily figured that out..
but more important is that I want to copy a folder.. with unknown list of way too long files and sub folders..
and all I see is ability to move a file..
Is this possible?
Thanks

Need help with a script for moving bulk users to another OU and removing/assigning groups

I've never used PowerShell before and have been asked to track down a script that can move bulk users from one OU to another, and remove and assign new group membership. I've been googling it for about 30 minutes and haven't really gotten anywhere. If
somebody can point me in the right direction or give some tips I'd greatly appreciate it. I'm sure this kind of task has been done by several people in similar environments I just haven't been able to find those people/examples.

Here's what I've got so far...
Moving to new OU
CSV constructed like below...
DN
TargetOU
“CN=John R, OU=BB,OU=ES,OU=Students,OU=OSD,DC=usd233,=DC=local”
"OU=PRT,OU=MS,OU=Students,OU=OSD,DC=usd233,DC=local"
Import-Module activedirectory
$UserList = Import-Csv "c:\yourCSVhere.csv"
foreach ($User in $UserList) {
$User.DN
$User.TargetOU
Move-ADObject -Identity $User.DN -TargetPath $User.TargetOU
Would this work? I also need to remove the user from two groups and add them to two different groups as well. Would I need to use the addUsertoGroups and removeUserfromGroups commands?

Need help with configure script for audacious plugin

Hello. I have written a small plugin for audacious, that uses an Amarok script to retrieve song lyrics and displays them in a window. I'd like to make an AUR package of it, but I don't even know how to write a configure script. I used to compile it with audacious-plugins, but I suppose a package with all audacious plugins plus my own would be sort of a duplicate of the vanilla audacious-plugins.
Can anyone help me?

btn1.addEventListener(MouseEvent.CLICK,f1):
function f1(e:MouseEvent){
nextFrame();
btn2.addEventListener(MouseEvent.CLICK,f2):
function f2(e:MouseEvent){
prevFrame();

Need help with python script for Deluge

I am using Deluge 1.3.2 with web server, and all works fine, I use this script in the Deluge settings to execute upon torrent completion:
#!/bin/bash
torrentid=$1
torrentname=$2
torrentpath=$3
torrenttimedelta=`/usr/bin/python2 /home/bobby/scripts/deluge/torrentTimeDelta.py $1`
subject="Started download new torrent!"
message="$torrentname to $torrentpath"
echo -e `date`"::Finished downloading torrent:$2 in: $3" with id:$torrentid >> ~/logs/scripts.log
echo -e `sendEmail -t [email protected] -f [email protected] -u "deluge server notification: torrent $torrentname is complete!" -m "$torrentname has completed downloading at: $torrentpath and took $torrenttimedelta to complete :)" -xu [email protected] -xp password -v -o tls=yes -s email.com` >> ~/logs/scripts.log
echo ---------------------------------------- >> ~/logs/scripts.log
This is to email me when a torrent is done and works. What I wanted to add to this email was the time taken to complete the torrent. I have gotten help from Deluge forum in this thread: http://forum.deluge-torrent.org/viewtop … =9&t=36989 However I think it's something with Python within Arch that is the obstacle, and so that helpful person can't do much more IMO. The python script I'm using is:
#!/usr/bin/python2
from deluge.ui.client import client
from twisted.internet import reactor
d = client.connect()
def on_connect_success(result):
print "Connection was successful!"
def on_get_torrent_value(value):
for torrent in value:
print "%s: %s" % (torrent, value[torrent]["name"])
client.disconnect()
reactor.stop()
client.core.get_torrents_status({}, ["name"]).addCallback(on_get_torrent_value)
d.addCallback(on_connect_success)
def on_connect_fail(result):
print "Connection failed!"
print "result:", result
d.addErrback(on_connect_fail)
reactor.run()
Now if I call this from shell directly, it works. However, including it with my email script at the top, Deluge itself freezes and no email is sent. I run ps aux | grep deluge and I can see that the script has run, but apparently died and all is just hanging. I kill the script process and Deluge resumes just fine, the email is sent. Kinda confused how to remedy this, appreciate any help Thanks
P.S. When I get the email, the part that says ""$torrentname has completed downloading at: $torrentpath and took $torrenttimedelta to complete "" shows nothing where $torrenttimedelta should be, it just says "and took to complete"

[edit] Sorry, I don't use deluge and I messed up my test script. If the script is executable try `/home/bobby/scripts/deluge/torrentTimeDelta.py $1`
Are there any other errors? or try running bash with debug output to see if it will tell you something else
The problem you are having is bash doesn't recognize variables inside the tick marks.
Hope that helps
Last edited by rickeyski (2011-07-05 19:27:36)

Need help in creating XSD for a WSDL file to tranform given XML

Hi,
Please let me knoe if this is the right forum to post the query below:
We are trying to transform a XML output from a webservice using a XSD file. But we are facing problem as the XML output has some namespace issue and schema due to which transformation is not working fine. I am pasting the files below:
WSDL file used is
<?xml version="1.0" encoding="utf-8"?>
<wsdl:definitions xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="http://tempuri.org/Projectix20/SOAPAccess" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" targetNamespace="http://tempuri.org/Projectix20/SOAPAccess" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<wsdl:types>
<s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/Projectix20/SOAPAccess">
<s:element name="ExecuteSQLToXML">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="SQL" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="GUID" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Password" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
<s:element name="ExecuteSQLToXMLResponse">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="ExecuteSQLToXMLResult">
<s:complexType mixed="true">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="NewDataSet">
<s:complexType>
<s:choice>
<s:element minOccurs="0" maxOccurs="unbounded" name="Table1">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="10" name="FName" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
</s:choice>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
<s:element name="GetDataTablePage">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="SQL" type="s:string" />
<s:element minOccurs="1" maxOccurs="1" name="PageNumber" type="s:int" />
<s:element minOccurs="1" maxOccurs="1" name="RecordsPerPage" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="GUID" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Password" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
<s:element name="GetDataTablePageResponse">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="GetDataTablePageResult">
<s:complexType mixed="true">
<s:sequence>
<s:any />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
<s:element name="GetRecordCount">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="SQL" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="GUID" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Password" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
<s:element name="GetRecordCountResponse">
<s:complexType>
<s:sequence>
<s:element minOccurs="1" maxOccurs="1" name="GetRecordCountResult" type="s:int" />
</s:sequence>
</s:complexType>
</s:element>
<s:element name="UploadCanAtt">
<s:complexType>
<s:sequence>
<s:element minOccurs="1" maxOccurs="1" name="CanID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="Filename" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="bytesData" type="s:base64Binary" />
<s:element minOccurs="0" maxOccurs="1" name="GUID" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Password" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
<s:element name="UploadCanAttResponse">
<s:complexType>
<s:sequence>
<s:element minOccurs="1" maxOccurs="1" name="UploadCanAttResult" type="s:int" />
</s:sequence>
</s:complexType>
</s:element>
<s:element name="DownloadCanAtt">
<s:complexType>
<s:sequence>
<s:element minOccurs="1" maxOccurs="1" name="CanAttID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="GUID" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Password" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
<s:element name="DownloadCanAttResponse">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="DownloadCanAttResult" type="s:base64Binary" />
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</wsdl:types>
<wsdl:message name="ExecuteSQLToXMLSoapIn">
<wsdl:part name="parameters" element="tns:ExecuteSQLToXML" />
</wsdl:message>
<wsdl:message name="ExecuteSQLToXMLSoapOut">
<wsdl:part name="parameters" element="tns:ExecuteSQLToXMLResponse" />
</wsdl:message>
<wsdl:message name="GetDataTablePageSoapIn">
<wsdl:part name="parameters" element="tns:GetDataTablePage" />
</wsdl:message>
<wsdl:message name="GetDataTablePageSoapOut">
<wsdl:part name="parameters" element="tns:GetDataTablePageResponse" />
</wsdl:message>
<wsdl:message name="GetRecordCountSoapIn">
<wsdl:part name="parameters" element="tns:GetRecordCount" />
</wsdl:message>
<wsdl:message name="GetRecordCountSoapOut">
<wsdl:part name="parameters" element="tns:GetRecordCountResponse" />
</wsdl:message>
<wsdl:message name="UploadCanAttSoapIn">
<wsdl:part name="parameters" element="tns:UploadCanAtt" />
</wsdl:message>
<wsdl:message name="UploadCanAttSoapOut">
<wsdl:part name="parameters" element="tns:UploadCanAttResponse" />
</wsdl:message>
<wsdl:message name="DownloadCanAttSoapIn">
<wsdl:part name="parameters" element="tns:DownloadCanAtt" />
</wsdl:message>
<wsdl:message name="DownloadCanAttSoapOut">
<wsdl:part name="parameters" element="tns:DownloadCanAttResponse" />
</wsdl:message>
<wsdl:portType name="SOAPAccessSoap">
<wsdl:operation name="ExecuteSQLToXML">
<documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Executes a SQL statement and returns a generic XML document with results from SQL statement.</documentation>
<wsdl:input message="tns:ExecuteSQLToXMLSoapIn" />
<wsdl:output message="tns:ExecuteSQLToXMLSoapOut" />
</wsdl:operation>
<wsdl:operation name="GetDataTablePage">
<documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Executes a SQL statement and returns a generic XML document with results from SQL statement.</documentation>
<wsdl:input message="tns:GetDataTablePageSoapIn" />
<wsdl:output message="tns:GetDataTablePageSoapOut" />
</wsdl:operation>
<wsdl:operation name="GetRecordCount">
<documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Executes a SQL statement and returns a generic XML document with results from SQL statement.</documentation>
<wsdl:input message="tns:GetRecordCountSoapIn" />
<wsdl:output message="tns:GetRecordCountSoapOut" />
</wsdl:operation>
<wsdl:operation name="UploadCanAtt">
<documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Uploads a text or binary attachment file for a Candidate record.</documentation>
<wsdl:input message="tns:UploadCanAttSoapIn" />
<wsdl:output message="tns:UploadCanAttSoapOut" />
</wsdl:operation>
<wsdl:operation name="DownloadCanAtt">
<documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Uploads a text or binary attachment file for a Candidate record.</documentation>
<wsdl:input message="tns:DownloadCanAttSoapIn" />
<wsdl:output message="tns:DownloadCanAttSoapOut" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SOAPAccessSoap" type="tns:SOAPAccessSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
<wsdl:operation name="ExecuteSQLToXML">
<soap:operation soapAction="http://tempuri.org/Projectix20/SOAPAccess/ExecuteSQLToXML" style="document" />
<wsdl:input>
<soap:body use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="GetDataTablePage">
<soap:operation soapAction="http://tempuri.org/Projectix20/SOAPAccess/GetDataTablePage" style="document" />
<wsdl:input>
<soap:body use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="GetRecordCount">
<soap:operation soapAction="http://tempuri.org/Projectix20/SOAPAccess/GetRecordCount" style="document" />
<wsdl:input>
<soap:body use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="UploadCanAtt">
<soap:operation soapAction="http://tempuri.org/Projectix20/SOAPAccess/UploadCanAtt" style="document" />
<wsdl:input>
<soap:body use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="DownloadCanAtt">
<soap:operation soapAction="http://tempuri.org/Projectix20/SOAPAccess/DownloadCanAtt" style="document" />
<wsdl:input>
<soap:body use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SOAPAccess">
<wsdl:port name="SOAPAccessSoap" binding="tns:SOAPAccessSoap">
<soap:address location="http://sales.projectix.com:81/customer/SOAPAccess.asmx" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
XSD file used for transformation is:
<?xml version = '1.0' encoding = 'UTF-8'?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" >
<xs:element name="ExecuteSQLToXMLResponse">
<xs:complexType>
<xs:sequence>
<xs:element ref="ExecuteSQLToXMLResult"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="parameters">
<xs:complexType>
<xs:sequence>
<xs:element ref="ExecuteSQLToXMLResponse"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="ExecuteSQLToXMLResult">
<xs:complexType>
<xs:sequence>
<xs:element ref="NewDataSet"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="FNAME" type="xs:string"/>
<xs:element name="Table1">
<xs:complexType>
<xs:sequence>
<xs:element ref="FNAME"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="NewDataSet">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="Table1"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
XML Output from webservice call that we are trying to tranform using above XSD is:
<parameters >
<ExecuteSQLToXMLResponse xmlns = "http://tempuri.org/Projectix20/SOAPAccess" >
<ExecuteSQLToXMLResult >
<NewDataSet xmlns = "" >
<xs:schema xmlns:xs = "http://www.w3.org/2001/XMLSchema" xmlns:msdata = "urn:schemas-microsoft-com:xml-msdata" >
<xs:element name = "NewDataSet" msdata:IsDataSet = "true" >
<xs:complexType >
<xs:choice maxOccurs = "unbounded" >
<xs:element name = "Table1" >
<xs:complexType >
<xs:sequence >
<xs:element name = "FNAME" type = "xs:string" minOccurs = "0" ></xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
<Table1 >
<FNAME >
JOHN
</FNAME>
</Table1>
<Table1 >
<FNAME >
John
</FNAME>
</Table1>
<Table1 >
<FNAME >
John
</FNAME>
</Table1>
<Table1 >
<FNAME >
JOHN
</FNAME>
</Table1>
<Table1 >
<FNAME >
John
</FNAME>
</Table1>
</NewDataSet>
</ExecuteSQLToXMLResult>
</ExecuteSQLToXMLResponse>
</parameters>
I am not sure what we are missing in XSD file that the XML output is not getting transformed correctly...although we tried transforming the XML output by removing some information in XML output above and it was getting trasformed properly..
We remove
1. xmlns = "http://tempuri.org/Projectix20/SOAPAccess" from <ExecuteSQLToXMLResponse xmlns = "http://tempuri.org/Projectix20/SOAPAccess" >
2. xmlns = "" from <NewDataSet xmlns = "" >
3 remove <parameters > and </parameters > tags from output and the XML Output is getting tranformed correctly.
Please let us know if we can transform the XML Output without requiring these removals.
Thanks,
Pawan

Could you clarify some things? You are saying you are trying to transform the xml output of a webservice with an xsd, but an xsd is a schema that describes the allowed format of a xml file. If you want to transform xml from one format to an other (from one xsd to an other) you have to use a xsl file. You can make and test this with JDeveloper. Are you calling the webservice from esb or bpel?
Kind Regards,
Andre

Need Help with EEM script for monitoring Rx and Tx load on Link

Hello,
I'm trying to implement a script, which monitors the Tx and Rx Load on the Link and sends a syslog in case the load is exceeded 200 mark (i.e If Rx or Tx load > 200)
I have implemented the following script. But it is not giving the required results.
event manager applet test
event interface name Tunnel111 parameter rxload entry-val 200 entry-op gt entry-val-is-increment true poll-interval 5000
action 1.0 syslog msg "Increase Load On the Link"
I'm trying to monitor the load on Tunnel 111 which is mapped to WAN interface.
Router (Cisco 2821) has following IOS
c2800nm-advipservicesk9-mz.124-25g.bin

Hello Joseph,
As per your suggestion, we made some changes in our script and the following script is working fine. Its giving the required syslogs when the load is exceeded.
event manager applet test
event interface name Tunnel111 parameter txload entry-val 200 entry-op gt entry-val-is-increment false poll-interval 5
action 1.0 syslog msg "Increased Load On the Link"
Your prompt assistance is really appriciated.

Need Help to create new screen for RF Sapconsole

Hi Guru's
I'm new on RF (but some years in ABAP) since last week.
I need help to create new screens for RF (SAPLLMOB).
Can someone explain me the procedure to create screen (with ABAP code after) or perhaps someone have an exemple (simple or not) ?
I have to develop 2 new screens with really few time.
And, another subsidiary question :
how SAP can transfert information between the flash gun and the screen i have developped.
Is there some code to add to enable this functionality or it is include in SAPLLMOB on standard fields ????
It's a new strange world for me today...
Many thanks to everyone who can explain me
Alain

hi,
I am facing this problem as well. Is there any reference to create the new screen?
Hope someone can help! Thanks!
Regards,
Darren

Running a powershell script through task scheduler

Hi,
when I run a script using task scheduler, the prompt closes after the script ended. What is the argument to leave the prompt open?
Thanks,
Ashley

Hi Ashromeo,
Maybe you need to set excution plicy efore you running the script by the following command :
Set-ExecutionPolicy RemoteSigned
For details please refer to following link ：
http://technet.microsoft.com/en-us/library/hh849812.aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Need help in creating script for "Task Schedule" in Oracle E-Bussiness Suit

Similar Messages

Maybe you are looking for