Need help in recording multiple seperate tracks

hello, i've used cool edit and now audition to record for the last eight years or so. however, i've never gone byond tracking more then one mic at a time in the past. with some upcoming projects i will be tracking a full band and need to record multiple mics (most challenging being drums) and i need to be able to assign each mic to its own seperate track in real time.
i will be using a PreSonus firebox which was four inputs. i can make do with four mics just fine. my only problem is i can't find any info and i'm not even sure audition allows for simultaneous multi channel recording. it is imperative i be able to have separation for each mic for mixing. any advice/help? will i be forced to find another program?
thanks in advance,
joel

Audition handles multitrack recording just fine.
You don't say what version of Audition you have (there are variations in how to set up the recording) but if you're on the current 3.0 version, you'd:
Under Edit/Audio Hardware Set up, click on the Multitrack tab at the top. On the "Audio Driver" menu, select the appriopriate Presonus driver. Under "Default Input" Select the Presonus interface. Also select it on the Output menu if you want to outuput sound that way for monitoring. Click Okay.
Go to Multitrack view in the main programme.
Work down the inputs for each track (marked with a right-facing arrow) and select "Mono" and the Presonus output you wish to go to that track. If you want to output back to the Presonus, do the same with the output selection, otherwise just leave it to "Main".
(At this point, I suggest you save a session as "Basic multi setup" or similar to make it faster for the next take--then do a "Save As" for the actual recording you're about to do.)
Click the "R" button on each track you wish to record in (you don't have to do all tracks every time) to arm for record.
Click the main Record button to actually start recording.
If you have an earlier version of Audition or Cool Edit Pro, the procedure is similar but some of the controls are accessed in different ways.
Bob

Similar Messages

Need help in creating multiple signature forms?

need help in creating multiple signature forms that can be digitally signed in adobe reader

Automator gets a bit unweildy when trying to vary things outside of what the actions provide. Since you are already using an AppeScript in your workflow, might as well do the whole thing:
set baseFolder to (path to desktop) -- the location to create the folder
display dialog "Please provide a new folder name:" default answer "test"
set folderName to text returned of the result
repeat -- keep repeating until a number is returned
display dialog "How many subfolders?" default answer "5"
set theNumber to text returned of the result
    try -- test the result
      set theNumber to theNumber as integer
      exit repeat -- success
    end try
end repeat
tell application "Finder"
try -- make new folder
    set newFolder to (make new folder at baseFolder with properties {name:folderName})
on error number -48 -- skip errors if the folder is already there
    set newFolder to ((baseFolder as text) & folderName) as alias
end try
repeat with X from 1 to theNumber
    try -- make new subfolder
      make new folder at newFolder with properties {name:folderName & X}
    on error number -48 -- skip errors if the folder is already there
    end try
end repeat
end tell

Need help Setting up Multiple Static Ip , 1 for each port of the fios router

Need help Setting up multiple Static Ip on my fios router
I have been trying to figure out how to set up multiple ip in my fios router.
However I kind of managed how to set up multiple static ip However the way I want it is for each port of my router to have an external ip signed to it. ( like 4 different modem in 1 )
Verizon gave me 5 static ip but they can not help me how to set it up.
Have anyone here done more then one static ip on different ports? I assume that the process will be the after the second static ip.

You want to set up Static Nat. You will not assign the IP to a port, but rather to a local machine. Figure out what machines you want your IP's to go to. Under the firewall section you will see static nat. Pick the machine you want and enter one of the IP's you were assigned.

Here is How to Edit clips of the same loop, which were recorded on seperate tracks, in the same way

Whiteout conditions here in the northeast, it's a Blizzard!
Hopefully this helps someone because I was banging my head against the wall trying to figure this out.
This is for people who want to precisely loop (or edit in other ways) multiple clips in the exact same way, but that are on seperate tracks playing concurrently in Multi-track view, so for instance looping 3 different tracks recorded simultaneously from a drum machine and keeping the same exact placement of each track relative to each other when trying to get the loop right (or any other type of edit)
It's all about how you switch between Edit view and Multi-track view, and you CAN'T group your clips before going to edit view, although this is counter-intuitive.
The basic jist is simple, "Selections" in the timeline, transfer from Multi-Track to Edit View and Back to Multi-Track...but you most follow a certain procedure, here is the procedure:
WARNING: THIS WILL ONLY WORK IF THE SELECTION IS OF ONE CLIP PER TRACK!!! YOU CANNOT MAKE A TIMELINE SELECTION OF MULTIPLE CLIPS ON A TRACK AND HAVE THAT TIMELINE SELECTION TRANSFER TO EDIT VIEW, AS FAR AS I KNOW.
In Multi-Track view:
1) Switch the timeline to "Samples"
2) Make a "Selection" of the part you want to Loop and zoom all the way in to the start and end points to get the loop as precise as possible, if it's not perfect don't worry just get it as good as possible in Multi-track View, then in Edit View you can find the Zero-Crossing points.
3) Make sure the clips you want to edit are NOT GROUPED AT THIS POINT
Here is the part that got me - AFTER making your Selection in Multi-Track view - you have to go to Edit view in a certain way, so that you don't de-select your selection:
WARNING: Do NOT Double-Click the clip/file you want to Edit!!! Do not double left-click anywhere in MultiTrack View or you will de-select your selection.
note: You have to edit the files one at a time in Edit View, but if you go there using the correct procedure, you can transfer your selection you made in Multi-Track view.
4) Decide which clip is the hardest to one to loop (usually it's an instrument sample rather then a drum loop but you never know)
5) Instead of double-clicking a clip to Edit it, HOLD CONTROL AND LEFT CLICK THE CLIP YOU WANT TO EDIT ONE TIME, this will select the clip without de-selecting your TIMELINE SELECTION.
6) Now that the clip you want to edit is selected, You want to go to Edit View USING ONE ROUTE ONLY --> Simply click "Edit View"
^Make sure you Timeline selection is still in place and hasn't moved do to user error (e.g. accidentally clicking the timeline or shift-clicking and moving the selection by accident <--- which I do by accident when attempting to control+click)
7) If you followed the instructions exactly, You are now in Edit View with the selected clip along with the timeline selection you selected in Multi-Track view, showing it's exact timeline location at the bottom which is relative to the Multi-Track view
IMPORTANT: YOU MUST BE CAREFUL NOT TO DE-SELECT THE TIMELINE SELECTION, AS THAT WILL DE-SELECT THE TIMELINE SELECTION IN BOTH VIEWS.
8) If you are having trouble looping without artifacts, To find the zero crossing points either go to edit > zero crossings or use shift+h or j for left edge, shift+K or L for right edge of the loop.
9) if you must adjust it manually to fine tune then make sure you shift click the file as not to de-select the entire timeline selection.
10) Once you have a perfect loop, zoom all the way in to the start and end points, and take note of exactly where the start and end points of the loop are located within the timeline.
11) Go back to Multi-track view
12 To trim the clips to to the exact timeline selection: Hold control+left_click each clip that needs adjusting one-time, then right click > group clips
13) BEING CAREFUL NOT TO DESELECT YOUR TIMELINE SELECTION, select your grouped clips by HOLDING CONTROL and clicking on any of the clips
14) Point to the start or end one of the clips, when you see the icon showing arrows going either way, right click and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection start and endpoints.
WARNING: IF YOU ACCIDENTALLY CLICK WHEN THE DOUBLE ARROW ICON IS NOT SHOWING, YOU WILL DE-SELECT YOUR TIMELINE SELECTION AND YOU WILL HAVE TO START THIS ENTIRE PROCESS ALL OVER AGAIN.
15) Verify that your loop is looping correctly, in some tricky instances you may have to find different zero crossing points on the initial file you edited in edit view by repeating the above procedure, but this is unusual, although it just happened to me.
16) If everything went correctly, now all your clips on seperate tracks are looped in the exact same way, if you want to destructively edit each file down to it's loop size, you can keep your timeline selection and control+click a file then click "Edit" (the one in the toolbar of course), one by one destructively editing each file.
17) to extend the loop either set as a loop under "loop properties" and then just drag each file the number of times you want it to loop, or do it my way and right click the clip > duplicate and set the number of times to duplicate and whether to have them back to back or spaced, this is the quickest method for me.
Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. You must then go back to MT view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit.
-Also, you don't HAVE to group the files as I did in step 12, you can drag the edges of the clips to the timeline selection one by one, I just find it easier to group them after you have set the loop on one of the files in Edit View.
-Remember, you can't select the files one by one and have the timeline selection transfer to Edit View IF you group the files prior to going into Edit View.
GOT ALL THAT? I sure as hell don't know if I do ...
All this could be easily avoided if Audition would simply let you edit multiple files simultaneously in Edit View relative to their position on the Multi-Track timeline.
I'd also like to know why when you do a full zoom in, neither the selection or the clips will snap to the ruler points, only to just before and after the ruler points on the timeline.
And also (and this may be my fault) I don't understand why when the tempo of my session is 89.8bpm, the timeline under the tracks says "90bpm" why does it round it off..?
Isn't that inexact and couldn't that present problems with syncing loops? idk I could be wrong I can't get my head around these issues because of lack of knowledge on the subject, if someone could shed some light that would be great.

correction needs to be made to step #14, I typed:
14) Point to the start or end one of the clips, when you see the icon showing arrows going either way, right click and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection start and endpoints.
Here is the correction, THE CORRECTED PARTS ARE CAPITALIZED:
14) Point to the start or end OF one of the clips, when you see the icon showing arrows going either way, LEFT-CLICK and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection's start and end points.
Another Correction:
Originally read:
Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. You must then go back to MT view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit.
Here is the the correction, CORRECTED PARTS ARE CAPITALIZED:
Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. IF YOU WANT TO EDIT THE 2ND FILE YOU SELECTED IN MULTI-TRACK VIEW, You must go back to Multi-track view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit, THEN CLICK "EDIT" TO GO TO EDIT VIEW.

Need help in displaying multiple attachments in a OAF Page

Hi,
I need to display attachemts of requisition line in a OAF Page(Notification Detials Page)and the attachments can be more than one.My custom VO returns it as a single string like url1, url2.. etc.
I need to show them as seperate links.
I tried using the Item Style as LINK.But it is not working.It is prefixing the server url before the View Attribute and creating a single link.
Any help in this regard will be appreciated.Thanks in advance.
Srini

Hi skeerthi,
If you are using the core attachments table (FND_ATTACHED_DOCUMENTS and the like), you can have a look on the Developer's Guide on chapter 4: Implementing Specific UI Features, section "Attachments", there is a seeded region available for displaying multiple attachments.
If you are not, then i'd recommend refactoring :D... Just kidding, it would be nice to use the core feature, but if the table is custom, and the links are stored separated by commas, you will have to write controller code to implement that. That can be done by:
1) Creating an Application module method that uses StringTokenizer to tokenize the attribute String (use getViewObject().getCurrentRow().getAttribute() to get the comma-separated value) and return that to the controller
2) In the controller, receive the StringTokenizer and for each token, use the api createWebBean() to create an OALinkBean and add it to a layout region using addIndexedChild() api.
This way you will dinamically create a Link for each attachment. If your layout region is, for example, tableLayout, you can create a rowLayout for each token, then create a Link, add the link to the row layout and finally add it to the tableLayout. By doing so, you will create a table-style attachment region.
Hope it Helps
Thiago

Novice needs help: inconsistent recording volume ("flutter")?

Hello All,
I'm new to Audition and have been struggling with my recording quality: I'm on a newer dual core Toshiba Qosimio multimedia laptop running Win 7 (64bit) and using a standard desk mic. I read the faq and help files on recording but still remain baffled about this. I'd greatly appreciate some help:
When recording music in Audition (for example: one strum of a guitar chord), I get a kind of fluttering: I don't hear the whole continous chord's sound. There are subtle 'dropouts' of the sound (like it has inconsistent volume). Now, I'm new at this so I'm probably not using the correct terminology..so I posted a wav file to let you hear:
http://home.comcast.net/~samiri/director/trash/InconsistentAudio1.wav
When using this same mic in my older PIV laptop running Win XP, the record quality is fine. Also, when I downloaded Audacity (free audio program) I think I hear the same fluttering..so maybe there is some way I need to set the recording (input) preferences on this machine.
Thanks for any assistance you can offer.
[email protected]

Ah, I had a recent laptop with Connexant Smart Audio, but recently replaced it.
There is a separate Smart Audio Control Panel that I think is accessible elswhere from the Windows Control Panel. I found it almost totally incomprehensible, but seem to remember that there was a way of switching between two options, one simpler than the other.
I would also go into the advanced playback settings to see if there are "enhancements" there. Some of these may affect recording.
As I said before, the only approach with all of this is to find all the various audio contol panels, switch off any effects or enhancements and set all the default sample rates for record and playback to the rate you will be using. Note that the various audio control panels may or may not stay in sync, so it's as well to go round the loop(s) a few times. Do check there is nothing hidden in the "enhancements" area by making sure you scroll down all the options if there are more than just one or two. Note that the Windows audio Control Panel has to be closed and re-opened before you can trust what it says.
None of this is the fault of Audition, which just records what is fed to it. It is the fault of Microsoft that there is a broken sample rate converter in Windows 7 and whoever designed the Connexant audio gui does need to be re-educated, I think.
It would, of course, be very sensible to seek out an external decent usb or similar audio interface.

HELP!! Multiple Video Tracks

I need to know if you are able to have multiple video tracks and once they are all lined up in the sequence you want, am I able to cut from one video track to another just like you would edit from scene to scene with 1 video track (like in Imovie)? I need to edit a dance recital with video from 3 cameras, so i need to line up the videos so they are all in sync as far as time is concerned, then switch from one video track to another without seeing the other tracks playing at the same time...in essence "mask" the other video tracks I don't want to see, but keeping all three video tracks in time and sync'd.
If yes....then I'm buying Final Cut...if no...I need something else!
Hope you understand what I'm asking!!!
Thanks, DJ

You can do it though FCP does it more efficiently.
It is a bit fiddly in FCE though Piero's free PIP filter makes it a bit easier:-
http://web.mac.com/piero.fiorani/PieroFFCE_Effect/QuarterPIP.html

Recording Multiple Audio Tracks - delay problems in 7.2 Pls HELP

Hi, I'm finding very buggy behavior - if I record across several audio tracks (say 5 mono channels) for longer then 10-15 sec. Logic HANGS for a long time when I'm done with a take - 15-25 secs of the spinning ball icon, and then will redraw and start the dialog box that says it's computing the overview. I'm currently on 7.2.2 but I also tried going back to 7.2.1 and it's still doing this. I have the "faster overview calculation" box un-checked, but it didn't seem to make any difference either way. I also tried this on a new file, same problem -
I also already tried recording to different drives, and selecting and unselecting the 'record limit' dialog in the record destination dialog - I usually have this set to a max recording time of about 7 minutes. None of these changes affected the sluggish behavior.
Anybody else know of this and know of a fix/workaround? I have a session to record tonight with multiple players and this session is going to go like molasses unless I figure this out!
thanx

Hmm, I've never had anything like this. I'm wondering whether it indicates an underlying disk problem?
Try running repair permissions and a disk diagnostic tool if you have it. Are you using an internal or external drive? Try recording to a different drive if you can and see whether the problem persists.
You could also try creating a different user and running Logic under that account, to see if it still shows the same behaviour (if not, then it could be a user permissions issue or something funky with your user account).

Need help on inserting multiple records into database

Hello every body,
In my web page there is multiple select box.In that contains
service-servicecategory-priority-filecontent -data in each item.
suppose if select ten items and press submit button then that ten item schould be insert into database at a time. I don't know how to do?
if any body know or any sample code ..plz help me.
thanks in advance.

suppose if select ten items and press submit button
then that ten item schould be insert into database at
a time. I don't know how to do?
if any body know or any sample code ..plz help me.I'll give you the answer if you give me dukes.

Urgent!! need help to bounce all the tracks individually with same length.

i have a logic project with 20 (audio/Midi) tracks
and i want to bounce all the tracks individually...
one way i find is to solo every track and bounce the master everytime...
and other way i found was something called export all audio tracks but when i try that all tracks have different length.
i want all the tracks to be of same length and same size..
can anybody help me with that asap....
thanx in advance
boommmm
null

zerodb wrote:
even i want to know how to render multiple tracks at once using the same start point for all.. please someone.. if you're acquainted with this process in logic, do Help! thanx
File>Export>Export All tracks as Audio Files
This will export all tracks from bar 1, beat 1.
I too, am curious why the OP needs his tracks to be the same length. Using the Export feature insures all tracks start from the very beginning (i.e., the same starting point), which is what you want and need when moving the tracks to another DAW.
The length of the track is of no consequence in this example. It plays through the song, until that track is over, like a guitar solo that appears in the middle of a song, but doesn't play past that point.
Unless I'm missing something?

Noob needs help with hosting multiple sites

Hello I am new to this multi hosting. I have looked on the forum for answers but haven't found any. I am trying to figure out how to host multiple sites. I have my dns working for my default site "example1.com", but need to know if I need to add another dns record for my second site. "example2.com". Also when I point to the new fold that has the second site in it and I assign it port 82 for testing purposes I get an error message saying 403 access forbidden. I need to find out how get permission to view the site for the public. Its in a separate folder on an external hard drive right now for testing purposes. Can any body help me or point me in the right direction? Thanks so much!!!
-Kcam1999

{quote}
While what you are telling him is technically functional, it is not correct
I beg to differ, Paul. You are the one that is not correct.
CNAMES have been deprecated as of some years ago
What? huh? really?
Please show me any official document that states this (and not someone who just started a rumor because he didn't understand them). Indeed, the DNS RFC makes no such claim.
{quote}
I stand very much corrected. CNAMEs are not officially deprecated. Interestingly, your post cites precisely what happens when CNAMES used carelessly. How many transactions are needed to resolve Apple's CNAME chain below? RFC1912 (http://www.faqs.org/rfcs/rfc1912.html) has some recommendations that suggests Apple's own network folks have, like me and perhaps even others here, some learning to do. Is that a 'best practice?'
{quote}> Then make sure you tell Apple since this site depends on the use of CNAMEs:
dig discussions.apple.com
discussions.apple.com. 492 IN CNAME discussions.apple.com.edgesuite.net.
discussions.apple.com.edgesuite.net. 4427 IN CNAME a1399.b.akamai.net.
a1399.b.akamai.net. 2 IN A 128.241.220.82
a1399.b.akamai.net. 2 IN A 128.241.220.72
In fact, it uses TWO CNAMES in a chain. Oh my.{quote}
From RFC1912 (which I'm sure many have now read here), section 2.4 is as follows:
{quote}... having chained records such as CNAMEs pointing to CNAMEs may
make administration issues easier, but is known to tickle bugs in
some resolvers that fail to check loops correctly. As a result some
hosts may not be able to resolve such names.{quote}
{quote}> It is not valid to say "don't use these because they could cause problems'. A records can be just as problematic, as can PTRs. Let's not even talk about MX.{quote}
How, exactly, does is an A record problematic? No chains, no additional lookups, no wasted cycles...
We differ here -- and if we are dealing with a newbie, we don't need to enter into unnecessary complexity UNTIL it is a requirement for their solutions.
{quote}> There are many valid reasons to use CNAMEs in DNS, not least of which is the ease of moving a service if it uses CNAMEs. For example, if you have 10 A records all pointing at the same server and you want to migrate to a different machine you have to locate and update all 10 records. If they used a CNAME to the physical server you could move them all at once using a single change. This is especially important in cross-domain links where you may not control all the origin zone files.
{quote}
You're somewhat reaching here, and it is well beyond the scope of the OP's post or needs (well, until they tell us more about their needs, I suppose). There is nothing difficult about 'finding' and updating the necessary records. The final example you gave is a good one and I'll say THAT is an appropriate use of a CNAME, 'though there are other workarounds for it.
Thanks for keeping me honest.

Need help on recording in lsmw

hi fnds dis is kamesh ,, i need small help if anybody know abt multiple recordings in LSMW let me know
thanks in advance

Hi Kamesh,
First mention your both records in the first step of Batch Input recording in the LSMW object by clicking on Right Arrow button. After that in the Field Mapping and Conversion rules step, you can use Events i.e., Beginof_Record_,_End_of_Record_ to handle two different records. For example, in FS00 transaction we can have two types of G/L Accounts, one is P&L Statement account and another is Balance sheet account. So, I have two records for creation of the these different accounts.
Based upon the field value in the file, I need to trigger any one recording. So, we need to write the code in this fashion:
At the Beginof_Record_ of first recording, open the IF condition like
IF <acct_type> = 'P'
and in the Endof_Record_ event of first recording, after "transfer_record" statement, write "ENDIF".
Similarly, write IF condition for another recording. In this way you can handle both recordings in one LSMW object.
Note: If you are not able to see anything in blue colour with the events I am mentioning, press CTRL+F7, set the Global Data Definitions and Processing times indicator and save it. You will see the events.
Regards,
Adithya K
[email protected]
P.S: Reward points if its useful.

Need help with recording level!

Hi,
I am writing a tune on Garage Band. I have recorded several tracks. A few with hardware, a few with soft synths. I find I cannot adjust the recording level with the slider now (soft synth parts only). It seriously needs to be reduced, otherwise it sounds terrible. The slider simply wont move. Something must be wrong. Any ideas?
HELP!

Ratty, at some point you must have set a point on the volume curve by accident, that and/or setting a pan curve point are the only two things that will disable the volume (and pan) controls)
Good to hear the issue is no longer a problem. Have Fun --Hang B-)>

A SAP Community member need help to get back in track once again.

Hi to all experts and fellow members in these good community,
I learned and work as SAP BASIS and Security my previous company for about a year , but opportunately I get laid off recently due to cost cutting of the company. Can someone Help me to get back in Track to work with SAP BASIS project again so I could develop more and learned more on these exciting career.
please advise
Regards and Thanks,
Mayalu1627

SDN does not have a jobs forum, but there was a discussion recently about creating one for community members to find and communicate job possibilities.
Initially I was sceptical about this, but after a while I changed me mind and think it is a good (community friendly) idea.
Until then I am afraid the only thing we can offer is advise. Much like any advise elsewhere, you need to "take it as it comes".
Good luck,
Julius

Migrating from TSQL Need Help? printing multiple columns in Stored procedur

I need to create a Stored Procedure which returns set of columns not all
(for eg FirstName, LastName, Dept_Id) from emloyee table based on certain conditions.
In TSQL, it is very simple to create such stored procedures which return full recordset(or subset).
I tried creating explicit cursors but I can print only one record at a time. I dnt want concatenation of columns. I want seperate columns in ouput. How to achieve this.?
Code : (But i can only concatenate and print results, what i want is diffrent columns)
declare
f_name employees.first_name%type;
l_name employees.last_name%type;
cursor c is
select first_name,last_name
from employees;
begin
open c;
loop
fetch c into f_name,l_name;
exit when c%notfound;
DBMS_OUTPUT.PUT_LINE (f_name||' '||l_name);
end loop;
close c;
end;

Another very informative article on ref cursors:
PL/SQL 101 : Understanding Ref Cursors

Need help in recording multiple seperate tracks

Similar Messages

Maybe you are looking for