Need help in Rman

Hi
can i know the steps of rman backup and recover procdure in cross platform.
my situation here is i have to take a rman backup in AIX box and i have to restore it to HP-UX box, can any one give the steps to do it or can any one tell the best way to migrate it and oracle version on both boxes is 10g.

Dear user!
A cross-platform B & R is described at the following link:
[http://www.filibeto.org/sun/lib/nonsun/oracle/10.2.0.1.0/B19306_01/backup.102/b14191/dbxptrn002.htm#CHDCFFDI]
Yours sincerely
Florian W.

Similar Messages

Need help with rman bkp testing

Hello,
I am using oracle 8.0.6.0 on windows 2000 server and in nocatalog mode.As i cannot use duplicate command in this version, I took image copies of all the datafiles,controlfile and archives. I restore whole database on test machine on daily basis to act as RND database. I have same directory structure on both machines. I use same database name for both databases. i copy all the backups from primary database to test database (same bkp location on both machines). I could restore whole database and i use resetlog option. The next day, agian i take the backup and try to restore on test machine, but i am getting errors.
When i start rman with below commands,
run{
allocate channel d1 type disk;
set until scn 34534345;
restore database;
recover database;
sql 'alter database open resetlogs';
I am getting rman error as Rman-06088: datafile copy r:\backup\ddatabase\sys1orcl.ora not found or out of sync with catalog.
When i catalog all the file in backup directory, it gives another error when restoring. rman-06023.
I do this process on daily basis. Pls advice as i didnt get this error before and got it only today.
Thanks,

Hi ateeqrahman,
i am getting errors (datafile out of sync). Can you post the full error stack?
1) Do i need to copy old archives (27th March or earlier) to the other server to recover full database from backup of 28th March?As Kamran suggested if you followed the same procedure (but different SCN) with the new 28 March backup you shouldn't need old archives.
Rgds,
Tycho

Need help with rman basics

Hi,
I would like to take hot backup of our database with no catalog. I created two folders in the local disk Backup and archives. The rman backups are stored in this folder and archive are stored in archive folder.
Suppose server A has all the RMAN copies (backup available on other machine) and it got corrupted. I want to restore it on other machine.
I have few doubts:
1) Do i need to create same structure for all the database files in other server like the folders Backup,Archives and oracle home.
2) Do i have to copy all the files in Backup,Archives folders to their corresponding folders in other machine.
Can i restore the full database from here. I tried using similar scenario,but i had missing archives.
3) When the database is in archivelog mode and the online backup is being taken, the modifications done to the database are stored in online archive files. My question is suppose i switch the database in noarchivelog mode and start the database, do i still need recovery?
Thanks,

Hi.
1. Not really. But if you do it then its good.
2.
http://www.oracle-base.com/articles/8i/RecoveryManager8i.php
3. If a media failure occurs while the database is in NOARCHIVELOG mode, you can only restore the database to the point of the most recent full database backup. You cannot recover transactions subsequent to that backup. To restore a database operating in NOARCHIVELOG mode, you can use only whole database backups taken while the database is closed. Therefore, if you decide to operate a database in NOARCHIVELOG mode, take whole database backups at regular, frequent intervals.
Hope it helps

Please help with RMAN dup for RAC db

Happy Holidays!! All,
I need help with the following issue:
Both target and auxiliary databases are:
Database version is 10.2.0.3 with 2-node RAC db
Servers are MS 2003
Oracle Clusterware 10.2.0.3
Oracle ASM for storage
I have run the rman dup from RAC to a single instance db for a while. This is the first time I ran from RAC to RAC. This auxiliary db was refreshed before and was up for a while and was managed by server control tool. Now I am trying to refresh it with new backup files from production. I did the following as people suggested:
1)     shutdown instance in the second node.
2)     Startup nomount mode in the first node
3)     Run RMAN dup
It failed in the same place with slightly different errors. I pasted error messages at the bottom. I already created a TAR with Oracle but would like to know if anybody has any info related to this. Also I have several questions to ask:
1)     Should I stop all services related to Oracle in node-2
2)     Should I stop all clustware related services in node-1 except oracleCSServie since ASM uses it?
3)     Is there any way I can finish the dup manually from the place I failed? What going to happen if I don’t finish the rest of the dup and go ahead with “alter database open resetlogs”?
4)     How do I remove the database from under Server control – I already run “srvctl remove database -d atlrac” successfully. Is this all?
Thanks a lot for your help and have a great holiday season!!!
First time run:
contents of Memory Script:
shutdown clone;
startup clone nomount ;
executing Memory Script
database dismounted
Oracle instance shut down
connected to auxiliary database (not started)
RMAN-00571: ====================================================
RMAN-00569: ======= ERROR MESSAGE STACK FOLLOWS ==============
RMAN-00571: =============================================
RMAN-03002: failure of Duplicate Db command at 12/21/2009 20:24:47
RMAN-03015: error occurred in stored script Memory Script
RMAN-04014: startup failed: ORA-00610: Internal error code
Second time run:
contents of Memory Script:
shutdown clone;
startup clone nomount ;
executing Memory Script
database dismounted
Oracle instance shut down
connected to auxiliary database (not started)
RMAN-00571: ===================================================
RMAN-00569: ========== ERROR MESSAGE STACK FOLLOWS ==========
RMAN-00571: ===================================================
RMAN-03002: failure of Duplicate Db command at 12/22/2009 15:53:27
RMAN-03015: error occurred in stored script Memory Script
RMAN-04014: startup failed: ORA-03113: end-of-file on communication channel
Shirley

1) Should I stop all services related to Oracle in node-2
No, you just need to stop the second instance.
2) Should I stop all clustware related services in node-1 except oracleCSServie since ASM uses it?
No, you don't need to stop anything. Just have the instance startup nomount.
3) Is there any way I can finish the dup manually from the place I failed? What going to happen if I don’t finish the rest of the dup and go ahead with “alter database open resetlogs”?
You have not shown enough information. Did the restore succeed ? Did the recover succeed ? What was it doing when it failed ?
4) How do I remove the database from under Server control – I already run “srvctl remove database -d atlrac” successfully. Is this all?
Yes, srvctl remove database is all you need. (unless you also want to remove from listener.ora, tnsnames.ora, oratab etc)

Need help on transportable tablespace, after convert and move datafile over

I need help on transportable tablespace, after convert and move datafile over the target server, How do I plug them in to the ASM instance?
And How do I start the database ? what controlfile I should use?
Thanks.

I got error like this:
RMAN> copy datafile '/oracle_backup/stage/ar.269.775942363' to '+RE_DAT';
Starting backup at 29-MAY-12
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 05/29/2012 17:46:21
RMAN-20201: datafile not found in the recovery catalog
RMAN-06010: error while looking up datafile: /oracle_backup/stage/ar.269.775942363
How to deal with this?
I deleted all the current target tablespaces including contents. Do I have to do anything to make the database recognize those converted datafiles?

Need help with correction inscript for duplication on regular basis

Hi,
I am using Oracle 10.2.0.4 on Win 2008 R2. We have Archive mode enabled and no rman catalog is used. I have a requirement where i have to duplicate prod sevrer on regular basis to development server.
I have created few batch files so that the entire process in automated. Stored all the scripts in c:\script\clone\ directory.+
I have taken the backup copy of password and spfile from prod server and copied to the development server in same location.
These are the scripts i run in order:
*1_clone.bat*
set ORACLE_SID=orcl
sqlplus / as sysdba @c:\script\clone\2_test.bat
*2_test.bat*
shutdown immediate
startup nomount
host rman target sys/oracle@live nocatalog auxiliary / @c:\script\clone\3_rman.rcv
*3_rman.rcv*
run {
allocate auxiliary channel d1 type disk;
duplicate target database to ORCL NOFILENAMECHECK;
exit
When the duplication process in about to finish, i get below error:
contents of memory script:
shutdown clone;
startup clone nomount;
executing Memory Script
RMAN-03002: failure of duplicate DB command at 07/31/2012 08:02:21
RMAN-03015: error occured in stored script memory script
RMAN-06136: Oracle error from auxiliary database: ORA-01013: user requested cancel of current operation
Recovery Manager complete
SQL>
When i press exit, this window closes and i can run the alter database open resetlogs;+ command from a new sql prompt. I check online and some suggest there might be a window open with system user connected. Please suggest any changes in the script.
Best Regards,

Hello;
Having another session with system user will cause rman to throw this error. For example another session used to start up database in nomount mode still being active.
Duriing the cloning process the rman session needs to be exclusively connected to the auxiliary instance (no other session are allowed).
Duplicate post
request for help with rman cloning script
Best Regards
mseberg
Edited by: mseberg on Jul 31, 2012 5:02 AM

Need help to develop Pythagoras theorem-

Hi i need help to develop proofs 2,3,4
of pythagoras theorems in java as demonstrations
These are applets can anyone help me with it or give me an idea of how to go about developing it -
the site is the following
http://www.uni-koeln.de/ew-fak/Mathe/Projekte/VisuPro/pythagoras/pythagoras.html
then double click on the screen to make it start

Pardon my ASCII art, but I've always liked the following, simple, geometric proof:
     a                   b
---------------------------------------+
|       |                                |
a|   I   |              II                |
|       |                                |
---------------------------------------+
|       |                                |
|       |                                |
|       |                                |
|       |                                |
|       |                                |
b| IV   |              III               |
|       |                                |
|       |                                |
|       |                                |
|       |                                |
|       |                                |
|       |                                |
---------------------------------------+It almost goes without saying that I+II+III+IV == (a+b)^2, and II == IV == a*b,
I == a*a and III == b*b, showing that (a+b)^2 == a^2+a*b+a*b+b^2.
I hope the following sketch makes sense, stand back, ASCII art alert again:     a                   b
---------------------------------------+
|               .             VI         |
|     .                 .                |a
| V                               .      |
|                                        +
|                                        |
|   .                                    |
b|                                     . |
|                                        |
|                  IX                    |
| .                                      |
|                                    .   |b
|                                        |
+                                        |
|      .                                 |
a|               .                  . VII |
| VIII                   .              |
---------------------------------------+
                 a                    bThe total area equals (a+b)^2 again and equals the sum of the smaller areas:
(a+b)^2 == V+VI+VII+VIII+IX. Let area IX be c^2 for whatever c may be.
V+VII == VI+VIII == a*b, so a^2+b^2+2*ab= c^2+2*a*b; IOW a^2+b^2 == c^2
Given this fundamental result, the others can easily be derived from this one,
or did I answer a question you didn't ask?
kind regards,
Jos

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

What file format did you export it to?

Need help to open audios attached in a PDF file

Hello
I just need help. I have ordered a reviewer online that has audios and texts in a pdf file. I was told to download the latest adobe reader on my computer. I have done the same thing on my ipad mini. I am not so technical with regards to these things. Therefore I need help. I can access the audios on my computer but not on my ipad.
I want to listen to audios with scripts or texts on them so i can listen to them when i am on the go. I was also informed that these files should work in any device. How come the audios doesnt work on my ipad.
Please help me on what to do.
Thanks

Audio and video are not currently support on Adobe Reader. :-<
You need to buy a PDF reader that supports them. My suggestion is PDF Expert from Readdle ($US 9.99)

Need help to open and look for file by name

Hi,
Im needing help to open a folder and look for a file (.txt) on this directory by his name ... The user ll type the partial name of file , and i need look for this file on the folder , and delete it ....
How can i look for the file by his name ?
Thx =)

Hi ,
Sry ,, let me explain again ... I ll set the name of the files in the follow order ... Name_Serial_date_chanel.sxc ..
The user ll type the serial that he wants delete ...
I already figured out what i need guys .. thx for the help ^^
I used List Directory on advanced IO , to list all .. the Name is the same for all ... then i used Name_ concateneted with Serial(typed)* .. this command serial* ll list all serials equal the typed , in my case , ll exist only one , cuz its a count this serial .Then i pass the path to the delete , and its done !
Thx ^^

I need help, my ipod touch is not recognized by windows as a harddisk

i need help, my ipod touch is not recognized by windows like a memory card or a harddisk.
i would like to transfer the files from pc to my ipod touch without useing itunes.
as i see theres some people here that theires ipod touch are recongnzed as a digitl camra, mine is reconzied as nothing, some help plz.
Message was edited by: B0Om

B0Om wrote:
ok but i still dont understed, only my itnes recongnize my ipod, when i go to " my cumputer, it dosent show up there, not even as a digital camra
Your Touch is working correctly. Currently, without unsupported third party hacks, the Touch has NO disc mode. It will only show up in iTunes.
how do i put programes and games in my ipod touch
Right now, you don't. The SDK is scheduled to be released in Feburary. Then developers will be able to write programs that will be loadable.

Weird error message need help..

SO.. i havent updated my itunes in a while because i keep getting this weird message.. it comes up when im almost done installing the newest/newer versions of itunes. it says
"the feature you are trying to use is on a network resource that is unavailable" "click ok to try again or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below"
now when ever i choose a file from the browse box it replies with this message "the file 'xxx' is not a valid installation package for the product iTunes. try to find the installation package iTunes.msi in a folder from which you can install iTunes."
no idea need help thanks
~~~lake
Message was edited by: DarkxFlamexCaster
Message was edited by: DarkxFlamexCaster

+it comes up when im almost done installing the newest/newer versions of itunes. it says+ +"the feature you are trying to use is on a network resource that is unavailable" "click ok to try again or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below"+
With that one, let's try the following procedure.
First, head into your Add/Remove programs and uninstall your QuickTime. If it goes, good. If it doesn't, we'll just attend to it when we attend to iTunes.
Next, download and install the Windows Installer CleanUp utility:
Description of the Windows Installer CleanUp Utility
Now launch Windows Installer CleanUp ("Start > All Programs > Windows Install Clean Up"), find any iTunes and/or QuickTime entries in the list of programs in CleanUp, select those entries, and click “remove”.
Next, we'll manually remove any leftover iTunes or QuickTime program files:
(1) Open Local Disk (C:) in Computer or whichever disk programs are installed on.
(2) Open the Program Files folder.
(3) Right-click the iTunes folder and select Delete and choose Yes when asked to confirm the deletion.
(4) Right-click the QuickTime folder and select Delete and choose Yes when asked to confirm the deletion. (Note: This folder may have already been deleted if QuickTime was successfully removed using Add/Remove Programs earlier.)
(5) Delete the QuickTime and QuicktimeVR files located in the C:\Windows\system32\ folder. Click Continue if Windows needs confirmation or permission to continue. (Note: These files may have already been deleted if QuickTime was successfully removed using Add/Remove Programs earlier.)
(6) Right-click on the Recycle Bin and on the shortcut menu, click Empty Recycle Bin.
(7) Restart your computer.
Now try another iTunes install. Does it go through properly now?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

Need help adobe bridge cc output module

I need help. I have an assignment I'm held up on completing because the adobe cc bridge does not have the output modue I need. I followed the adobe instructions page to the letter. I copied and pasted the output module folder to the adobe bridge cc extensions folder in programs/commonfiles/adobe. The only thing is the instructions then say to paste the workspace file into the workspace folder located below the bridge extensions folder. I don't have a workspaces folder there or anywhere. I even tried must making one and adding the file to it, but no go. can someone PLEASE help me with this? I have an assignment due like now that requires the use of the output modue.thanks!

oh,my system is windows 8.1. sorry, lol.

Trying to create a Invoice based on Order need help Error -5002

the dreaded -5002 error is haunting me too! and I could not find a matching solution for this in the forum....
I need help quickly on this. I am trying to create invoices for some orders so the Base - Target relationship is retained. The orders I pick are all Open (DocStatus   = O and the lines are all Open LineStatus = O)
here is my code
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 0
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00001"
oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
'adding Line
oInvoice.Lines.Add
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 1
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00002"
oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
'adding Line
oInvoice.Lines.Add
lRetCode = oInvoice.Add
If lRetCode <> 0 Then
    gObjCompany.GetLastError lErrCode, sErrMsg
    MsgBox (lErrCode & " " & sErrMsg)
End If

Indika,
Only set your base types...
(not items & description)
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 0
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00001"
oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
'adding Line (to fill the second item line)
' the 1st line item is there by default
oInvoice.Lines.Add
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 1
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00002"
oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
'DO NOT Add THIS line
' (only if you want to add a 3rd line item)
'''oInvoice.Lines.Add -> Don't add this
lRetCode = oInvoice.Add
If lRetCode <> 0 Then
    gObjCompany.GetLastError lErrCode, sErrMsg
    MsgBox (lErrCode & " " & sErrMsg)
End If
remember to add :
oInvoice.CardCode = "your BP"
oInvoice.DocDueDate = Now
oInvoiceDoc.CardCode = txtDOCBPCode.Text

Need help in Rman

Similar Messages

Maybe you are looking for