Need help in text variable !!

experts !
i have asked question earlier about the problem, i was trying all the possible combinations and i just got another way,
Can i use Offset settings for Text variable ?
my requirement is , i have ofiscper, and there is a text variable created on that too. but if my fiscper is 0012010 then my text variable shows april 2010. but i need "may 2010" instate.
so, if my fiscper is 0012010 , then my text variable should show one month prior or after .
So, i found in text variable..ther is sometjng like "offset". i was wondering can i use that to get that result ?
i tried, but didnt work...
please help

Hi Honar,
The offset for text Variable is just to get a substring of the result of the text variable and not like the offset that we use in the Restriction of the Keyfigures.
Hence this will not work.
Regards.
Shafi.

Similar Messages

Need help with a variable

I ahve a report that I want to show Free to Sell stock - stock that is in the warehouse that hasn't been allocated.
I have created a variable called Freestock which basically uses a Physical Stock quantity minus the allocated stock quantity.
It is currently just adding all the figures together, instead of splitting it by item, so this is wrong
Here's the formula I'm using ;
=Sum(<Warehouse Physical Quantity>-<Outstanding Allocated Quantity>)
Any help would be greatly appreciated in getting this sorted
Thanks in advance

George,
I am sure the formula is correct.
It is currently just adding all the figures together, instead of splitting it by item,
You need to pull this variable with the item object. it will automatically break the number by the Item.
Hope this helps.
Kashif

Need Help regarding text Output

Dear gurus.
I need help regarding formatting of a text.
I want to format a employee sub group text.
im getting a text workers (7) from a table t503t having field ptext.
i want to show only (7) in the output not the whole text how can i do this ?
Please help
regards
Saad.Nisar

DATA: BEGIN OF itab_odoe OCCURS 0,
department_text LIKE t527x-orgtx,"Holds the short text for department
department_no LIKE pernr-orgeh,
pernr LIKE pernr-pernr,
ename LIKE pernr-ename,
grade like t503t-ptext,   "THIS AREA GET ME TEXT OF EMPLOYEE SUBGROUP"
* department_text LIKE t527x-orgtx,"Holds the short text for department
current_year LIKE sy-datum,
wt0001 LIKE q0008-betrg,"Basic Pay
wt1101 LIKE q0008-betrg," COLA
wt3002 LIKE p0015-betrg,"Overtime
per_basic type p DECIMALS 2,"Overtime percentage on basic
per_basic_sum type p decimals 2,"Overtime Sum Division
overtime_sum LIKE p0015-betrg,"holds sum of overtime
basic_sum like q0008-betrg,"holds sum of basic
END OF itab_odoe.
Im using the select statement to get the employee subgroup from the table
select single ptext
    from t503t
    into itab_odoe-grade
    where persk eq pernr-persk
    AND SPRSL eq 'EN'.
now in itab_odoe-grade the values comes is Workers (7) , Snr Mgt (M3)
i want to show only the text in Brackets.

Need help in text field with 2D array

text field with 2D array
Hi
I need help to represent (i) in from field and (j) in to field
I and j are 2D an array indices.
This code are not complated
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
//declaring class
public class test3 extends Applet implements ActionListener
{ //declaring the TextField
private TextField fromField ,toField;
//declaring an array
int weight[][];
int m = 99; // m is infinity
int N; // Set of Nodes
int d; // distance
int i; // source Node
int j; // destition Node
//declaring values of text field
private int from = i; // start Node
private int to = j; // end node
public void init()
setBackground(Color.white);
setForeground(Color.red);
//giving labels
Label TITLE2,TITLE1;
TITLE1 = new Label("from:");
add(TITLE1);
fromField = new TextField(5);
add(fromField);
// register listener using void add actionListener
fromField.addActionListener(this);
TITLE2 = new Label("to");
add(TITLE2);
toField = new TextField(5);
add(toField);
// register listener using void add actionListener
toField.addActionListener(this);
// event handler methods
public void actionPerformed(ActionEvent event) {
//declaring textfield
from=Integer.parseInt(fromField.getText());
to=Integer.parseInt(toField.getText());
weight =new int[7][7];
weight[1][1] = 0; weight[2][1]= 2;
weight[1][2]= 2; weight[2][2]= 0;
weight[1][3]= 5; weight[2][3]= 3;
weight[1][4]= 1; weight[2][4]= 2;
weight[1][5]= 99; weight[2][5]= 99;
weight[1][6]= 99; weight[2][6]= 99;
weight[3][1]= 5;
weight[3][2]= 3;
weight[3][3]= 0;
weight[3][4]= 3;
weight[3][5]= 1;
weight[3][6]= 5;
for (int i=1; i<7; ++i) {
for (int j=1; j<7; ++j)

all your base are belong to us

Need help with accesing variable with xpath.

Hi All,
I need help with xpath in "Switch" BPEL construct. Switch is used to compare value assigned to output vairable and follow one path for "Deny" and another for "Approve". The following is data type for output variable.
<element name="processResponse">
     <complexType>
          <sequence>
               <element name="result" type="string"/>
          <sequence>
     <complexType>
</element>
The following expressions in Switch statement throw lava.lang.Exception. It error is xpath internal error".
x20:compare('Deny',$outputvariable.payload/client:result)
x20:compare('Deny',bpws:getVariableData('outputvariable','payload','/client:processResponse/client:result')
It works with x20:compare('Deny','Deny'). So I assumed it must be accessing the variable.
Any help greatly appreciated.
Thanks,
Satish

Cany you try the following
x20:compare('Deny',string($outputvariable.payload/client:result))
x20:compare('Deny',string(bpws:getVariableData('outputvariable','payload','/client:processResponse/client:result'))
Regards
Albin I
http://www.albinsblog.com/

HELP! Need help generating TEXT-ONLY portal page...

Text Only Portal Question:
PLATFORM:
=================================================================
Sun Solaris (5.2 if memory serves) for db and mid-tier, running
8.1.7 DB and 3.0.9 (1.0.2.2) portal.
THE NEED:
=================================================================
I need to display text only portal pages. Some of the more
detailed concerns at this point are below. Also, I've had an open
tar on Metalink for about two weeks, and after research from
their end has resulted in no help.
THE ISSUES (so far):
=================================================================
IMAGES:
If an anchor [A HREF=...] tag uses an image as it's "text", I
need to strip out the ALT= text to show inside the anchor. If no
ALT text is available, then I would like to show the image name
as a default.
For example:
<img src=home.gif
alt=Home>
should display as:
Home
FORMS:
How do I get the resulting page from a form (which include the
login inputs and submit button, search box, advanced search page,
etc.) to be displayed by the text only page?
For example:
When a form is called, the <FORM> elements are as follows:
METHOD=GET or POST
ACTION=url (relative or absolute) to the script.
In this case, the action value is:
ACTION=/servlet/page?
pageid=6&dad=portal30&_schema=PORTAL30.
This calls the advanced search API.
I would expect that to redirect the browser back to some
text-only version, the ACTION= element would have to be changed
to be something like:
ACTION=[pathscraper]?/servlet/page?
pageid=6&dad=portal30&_schema=PORTAL30
REDIRECTION:
What happens when portal pages redirect internally? How do you
get back to the text-only page?
For example:
The login link on the standard Oracle Portal home page flips
from url to url to get to the actual login page. Our
implementation of Oracle portal goes from
[DOMAIN]/pls/portal30_sso/portal30_sso.wwsso_app_admin.ls_login
to [domain]/pls/portal30_sso/portal30_sso.login_page.
Since this is standard Oracle redirection, how can it be
intercepted so the portal30_sso.login_page can be presented as
text only?
TRIED SO FAR:
=================================================================
I've written a socket/text scraper in Perl, running it from a web
server. The problems mentioned above are really causing problems,
plus the whole cookie thing. Since Oracle Portal tries to push a
cookie to the client, when the client is another UNIX server,
the cookie thing doesn't work.
POSSIBLE OTHER SOLUTIONS:
=================================================================
Something...anything. I've tried to think of some method to
create some sort of PL/SQL procedure to catch the content then
strip out the HTML calls.
An Applet to do the same thing, but on the client side, but
since time is an issue, coding a complete Java applet isn't
really an option.
THE CONCLUSION:
=================================================================
HELP! I need some help. This is for a client that is government
funded, and to meet Section 508 (part of the Americans with
Disabilities Act that states web sites and applications must be
made accessible. A text-only page is one of the requirements for
an accessible page.
Thanks,
Ryan Stefani
ps: feel free to contact me via [email protected] or
[email protected]

Use Find/Change and the GREP tab.
Search for .+ and set the Find formatting to find the charcteristics you want.
What will you do with this text once found? You'll need something to "change" to, either new text or Change Formatting options...

Need help with text() processing in XSL

Hello,
I have an xml that contains such text in my xml:
before<a>inside</a>after
and an xsl that transforms it to HTML (a cut for xsl):
<xsl:template match="a">
<xsl:apply-templates/>
</xsl:template>
<xsl:template match="text()">
<xsl:value-of disable-output-escaping="yes" select="."/>
</xsl:template>
The result is: inside before after
but I need: before inside after
It seems it happens 'cause of this: http://www.w3.org/TR/xslt#conflict
but I cannot find a way to solve this problem :(
I had tried to use priority in xsl:template, but it didn't help :(
Thanks a lot.

DrClap
here are xml and xsl.
That's not a real xml and xsl, but they might describe the idea and problem. I hope I miss nothing.
P.S. I cannot control xml, that's why I cannot use: <xsl:text> in xml.
Thank you!
xml:
<?xml version="1.0" encoding="UTF-8"?>
<root>
<title>Page title</title>
<page>
Location: <red>http://host</red>
</page>
</root>
xsl:
<?xml version='1.0' encoding='ISO-8859-1'?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:fo="http://www.w3.org/1999/XSL/Format"
xmlns:fox="http://xml.apache.org/fop/extensions"
exclude-result-prefixes="fo">
<xsl:template match="root">
<html>
<head>
<title>
<xsl:apply-templates select="title"/>
</title>
</head>
<body>
<xsl:apply-templates select="page"/>
</body>
</html>
</xsl:template>
<xsl:template match="page">
<xsl:apply-templates/>
</xsl:template>
<xsl:template match="title">
[Test]: <xsl:apply-templates/>
</xsl:template>
<xsl:template match="red">
<xsl:element name="span"><xsl:attribute name="style">color:red</xsl:attribute><xsl:apply-templates/></xsl:element>
</xsl:template>
<xsl:template match="text()">
<xsl:value-of disable-output-escaping="yes" select="."/>
</xsl:template>
</xsl:stylesheet>

Need help with getting variable from static

Hello,
What I am building is an application that prompts for username/password before it shows the main screen. Once they have successfully logged in, I need to assign the username that they used, in order to use it for a button event if the make any updates.
Here is the code that I have tried to use.
public String username;
///This set's the public variable username
public void setUserName(String UserName){
username = UserName;
/////////////////Here is where they login, and assign the name to setUsername
public static void main(String args[]) throws SQLException {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
JFrame frame = new JFrame();
JTextField userName = new JTextField();
JTextField passWord = new JTextField();
Object[] options = {"OK","CANCEL"};
Object[] msg = {"UserName:", userName, "Password:", passWord};
final JOptionPane op = new JOptionPane(msg, JOptionPane.PLAIN_MESSAGE, JOptionPane.OK_CANCEL_OPTION){};
JDialog dialog = op.createDialog(frame, "Please Login");
dialog.show();
int result = JOptionPane.OK_OPTION;
try {
result = ((Integer)op.getValue()).intValue();
}catch(Exception uninitializedValue){}
if(result == JOptionPane.OK_OPTION) {
String userID = userName.getText();
String passID = passWord.getText();
Main myMain = new Main();
myMain.setUserName(userID);
if(!userID.equals("") && !passID.equals("")) {
new Main().setVisible(true);
}else {
// user cancelled
////here is the button event that also will need the username
private void selButtonActionPerformed(java.awt.event.ActionEvent evt) {
Connection conn = null;
Statement stmt3 = null;
Statement stmt4 = null;
ResultSet rset3 = null;
ResultSet rset4 = null;
String usernum = null;
String xemu = null;
String loc = null;
String ustat = null;
String manager = null;
String dept = null;
String Add = "Add";
String Update = "Update";
String groupID = "9999";
Vector columnNames = new Vector();
Vector data = new Vector();
String Manager_info[] = {"managerindex", "managers", "managername"};
String Account_info[] = {"acctypeindex", "acctype", "acctypedesc"};
String Group_info[] = {"groupnum", "groups", "groupcode"};
String System_info[] = {"systemindex", "systems", "systemname"};
String Dept_info[] = {"departindex", "departments", "departname"};
String Xemu_info[] = {"xemuindex", "xemulator", "xemudesc"};
String Location_info[] = {"locindex", "location", "locdesc"};
String Ustatus_info[] = {"ustatusindex", "userstatus", "ustatusdesc"};
Date myDate = new Date();
SimpleDateFormat formatter = new SimpleDateFormat("dd-MMM-yy");
String today = formatter.format(myDate);
System.out.println(username);
I am trying to set the public username variable to what the person enters, however since I am creating a seperate instance of it, I don't believe it will work. Any help would be very much appreciated.
Thanks.
Josh

I am developing in Netbeans. If I try to remove the static keyword from main(), netbeans canno't find a main to run. I have created the User class.
Here is the main again to show what I have done.
public static void main(String args[]) throws SQLException {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
User user = new User();
JFrame frame = new JFrame();
JTextField userName = new JTextField();
JTextField passWord = new JTextField();
Object[] options = {"OK","CANCEL"};
Object[] msg = {"UserName:", userName, "Password:", passWord};
final JOptionPane op = new JOptionPane(msg, JOptionPane.PLAIN_MESSAGE, JOptionPane.OK_CANCEL_OPTION){};
JDialog dialog = op.createDialog(frame, "Please Login");
dialog.show();
int result = JOptionPane.OK_OPTION;
try {
result = ((Integer)op.getValue()).intValue();
}catch(Exception uninitializedValue){}
if(result == JOptionPane.OK_OPTION) {
String userID = userName.getText();
String passID = passWord.getText();
user.setName(userID);
user.setPassword(passID);
if(!userID.equals("") && !passID.equals("")) {
//Auth.setUserName(userID);
//Auth.setPassword(passID);
new Main().setVisible(true);
}else {
// user cancelled
This set's the variables
Here is the beginning of the evt that I am using to try and get the data.
private void selButtonActionPerformed(java.awt.event.ActionEvent evt) {
Connection conn = null;
Statement stmt3 = null;
Statement stmt4 = null;
ResultSet rset3 = null;
ResultSet rset4 = null;
String usernum = null;
String xemu = null;
String loc = null;
String ustat = null;
String manager = null;
String dept = null;
String Add = "Add";
String Update = "Update";
String groupID = "9999";
Vector columnNames = new Vector();
Vector data = new Vector();
User user = new User();
String User = user.getName();
System.out.println(User);
String Manager_info[] = {"managerindex", "managers", "managername"};
String Account_info[] = {"acctypeindex", "acctype", "acctypedesc"};
String Group_info[] = {"groupnum", "groups", "groupcode"};
String System_info[] = {"systemindex", "systems", "systemname"};
String Dept_info[] = {"departindex", "departments", "departname"};
String Xemu_info[] = {"xemuindex", "xemulator", "xemudesc"};
String Location_info[] = {"locindex", "location", "locdesc"};
String Ustatus_info[] = {"ustatusindex", "userstatus", "ustatusdesc"};
Date myDate = new Date();
SimpleDateFormat formatter = new SimpleDateFormat("dd-MMM-yy");
String today = formatter.format(myDate);
String [] str = {
"EmpID", "Account", "System", "Type", "Status", "UserID", "Group"
This gives me a null on the println, how can I get the data that was entered in main()?
Thanks,
Josh

Need help in Bind variable in AF Query LOV

Hi,
i have one problem with bind variable, if i use bind variable in the LOV VO Query then my result is not coming, if there is not bind variable it's working fine and if i use the bind variable in the LOV search option then it's working fine but if i hide the bind variable and set the value in AM prepareSesstion method the LOV is not returning any value. I try to return the values also all values are also coming but those values are not setting to AF Query Attribute.
Query is:
select substr(d.description,0,40) description
from cm_system_users a,
cm_user_responsibilities b,
cm_responsibility_processes c,
cm_processes d
where a.nt_login =:B_NT_LOGIN
and a.user_id = b.user_id
and trunc(sysdate) between b.eff_date and nvl(b.exp_date,sysdate + 1)
and b.RESPONSIBILITY_ID = c.RESPONSIBILITY_ID
and c.process_type = d.process_type
and d.enabled_flag = 'Y' order by d.arguments_flag
AM Method:
CmProcessViewImpl vo = getCmProcessView();
String nt_login = getUserPrincipalName();
vo.setNamedWhereClauseParam("B_NT_LOGIN", nt_login.toUpperCase());
vo.executeQuery();
Can any one help me in this. it's urgent for me.

This is a little underdescribed. IIUC, the view object in question is being used as a target for a view accessor, correct? (Otherwise you'll have to be more explicit about what you mean by "Query LOV".
If I'm right, there are two possibilities:
1) You are using a VO instance in a shared application module instance. If so, make sure your code is in the prepareSession() for that application module class if it's session dependent (as it seems to be below), you need to make sure the application module instance is shared at session scope.
2) You've based the view accessor directly on the VO definition. This basically creates an anonymous VO instance; I don't think there's any way to use prepareSession() to set a bind variable on such an instance (which won't be created until the accessor is first used). You might be able to get by with putting similar code into the view object class' create() method, but I haven't tested this.
If your code is in your primary application module class (as opposed to the class for a shared AM instance), the problem here is that getCmProcessView() returns the VO instance from that application module instance's design-time data model, which is never used by view accessors.
By the way, why do you need to do this in prepareSession() instead of at the view accessor level? I believe you can get the logged in user name (for the view accessor) in with the groovy expression
viewObject.DBTransaction.session.userPrincipalName
or possibly just
DBTransaction.session.userPrincipalName
(despite this involving DBTransaction, it returns the web app user name, not the DB username).
That's a 100% declarative solution, if you don't count the Groovy expression as non-declarative.
If you're afraid of a user executing the LOV (somehow) before the bind variable value gets set, just ensure that the bind variable is marked "required".

I need help adding text!

I need some help with PE 12 and adding text...

this forum is for photoshop elements and photoshop elements doesn't support editing GIF.
You might want to post to photoshop community Photoshop General Discussion

Need Help Printing Text Messages From E71

I need to print some saved text messages that are on my e71 but cannot ge **bleep** to hook up to my bluetooth printer it just never finds it. Is there another way to print these messages fromt he phone i really need them

connect to pc and use ovi suite
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Need help doing text search of Blob

I presently have a simple single table candidate tracking application that create records of candidate information and you attach their resume in a word format into a blob column named RESUME within the table.
I need to be able to do a full text boolean search of the attached documents, since we're going to use this to allow us to search an internal database for people with particular skill sets.
I'm not a DBA or a developer, I just started working with Oracle Application Express and need a simple way of creating this search feature.
I also need to add the search feature into a region for users to input search terms.
Any help would be greatly appreciated.
Edited by: user10608055 on Nov 25, 2008 11:57 AM

try
http://tahiti.oracle.com/
in the list of books, look at 'TEX' for Oracle text.
Interesting you should bring this up. I'm slighly involved with US Transition team.
Many resumes are coming in.
Tim

Need Help removing text from an image.

I am using illustrator Cs3 version. I have an image of a sun with text in front of it, now I only need the image of the sun to then use in photoshop. How do I remove the text and still have a full-color image of the only the sun? Please Help! (Image below)

Hi,
You have posted your question in the Adobe Illustrator Draw iOS app forum. To get help for your question please post in the Adobe Illustrator desktop forum: https://forums.adobe.com/community/illustrator.
Regards,
Jose

Need help moving text

Using CS4 on Win7 Pro. My client bought a template that has a flash piece and I am a total novice in Flash but I do know that you edit the FLA file and export it as a movie. So I opened the FLA file and I'm able to edit the text (all that I want to do right now) but some of the text I'm replacing is longer than the original so it gets hidden under a replay button and some is shorter and is spaced too far away from the replay button (I also want to change the color of that and I think I can figure that one out). There is plenty of room to the left for the text to move to as the original file does have varying lengths of text and it does adjust for that but I can't figure out how to change it for what I've done (I haven't received the final text yet so this is a practice run)... I changed the text by going to the timeline and selecting text from the icon (Edit Symbols) in the upper right of the screen. But where do I tell it where the text should start or how wide it needs to be? I tried moving them individually in the timeline but that didn't change it.
Here's the file: http://do-rightweb.com/fertility/flash/header_vJT.fla (I only want to leave this up temporarily because it is huge. The test location of the file in action is here: http://do-rightweb.com/fertility/
In the future I may have to swap out some of the images leaving the transitions which I think I can do by adding them as a layer deleting the ones I'm replacing...
So if anyone can lend a hand in helping me figure out how to adjust the text width I would be totally jacked! Any help and advice about swapping images or changing colors would be greatly appreciated too. Or even a link to a video to help me understand how to reverse engineer this would be cool.
Thanks in advance for your help and assistance!

Hi,
Since the text animation is done using the timeline in this file you have to manually edit the positioning of the each symbol element in every keyframe i.e
You have to go in to the editing mode for txt_c instance of txt_2 > Layer 8 where the required elements are placed
1. You have to position the Layer 1(under Layer 8) items at every key frame for the display text
you may have problem while positioning second text onwards as you will not be seeing them on stage. For this you may want to duplicate the symbol(txt_5) at key frame 37 and edit it to have only the second text and remove everything else. And you can swap the existing symbols at key frame 44 and key frame 54. You can repeat this for the rest of the text.
2. Next you have to position the numbers which spread across three layers (txt_3, txt_4 and Layer 6) under Layer 8. They are for prefix number, suffix number and the dot respectively
Thanks!

Newbie needs help with passing variables or creating flash object based on parameters

Hello Community,
I'm an amateur developer of Ms Access databases. In one of my applications I want to visualize the options available when reaching a certain score.
What I'd like to get from this trial period, is a flash animation of a dartboard. Depending on an array of variables that provides the fill color (or reference thereof) the layers of the flash object will be dynamicly created, altered, or switched. The dartboard itself remains "static". I'm hoping to use 9 colors.
I can manipulate the array any way needed. I can provide XML coding to pass the array variables. I'm just too new and untrained to incorporate this in a Edge animation or Dreamweaver.
There is no need for interaction, once the object is created (ie no user feedback).
Can someone point me in the right direction?
thanks in advance,
Jay from Stockholm

Hi,
I see you're using System.Data.OracleClient (which has been deprecated by MS) rather than Oracle.DataAccess.Client, but this works for me with Oracle's ODP, maybe it will help.
Cheers,
Greg
using System;
using System.Data;
using Oracle.DataAccess.Client;
using Oracle.DataAccess.Types;
public class dataadapterfill
    public static void Main()
        using(OracleConnection con = new OracleConnection("user id=scott;password=tiger;data source=orcl"))
            con.Open();
            using(OracleCommand cmd = new OracleCommand("select ename from emp where ename = :1", con))
                cmd.Parameters.Add(new OracleParameter("myename", OracleDbType.Varchar2, 50)).Value = "KING";
                OracleDataAdapter da = new OracleDataAdapter(cmd);
                DataSet ds = new DataSet();
                da.Fill(ds);
                foreach (DataRow row in ds.Tables[0].Rows)
                    Console.WriteLine("ename: {0}", row["ename"]);
}

Need help in text variable !!

Similar Messages

Maybe you are looking for