Need help: iPad2 jack/headphone issue

My issue is no or garbled muffled sound from the headphone jack on my ipad2. I've tried all the usual fixes re settings, twiddling the jack, cleaning the jack,, rebooting, and even upgrading to ios7, but I still am experiencing these bizarre behaviors: (1) both my Bose earphones and my Sennheiser ear buds play iTunes songs with perfect stereo fidelity but the audio from podcasts and youtube videos is either extremely faint or garbled as if being played underwater. (2) When I pull the plug back slightly just outside its snapped in position, I can hear perfect stereo with both earphone types. The audio from the Sennheiser jack in this position however breaks up intermittently until I press upwards on it towards the glass and then it's clear as a bell. (3) I have another set of ear buds from my Olympus digital recorder and these work perfectly on all audio sources when fully plugged in!!! BTW, the iPad's external speakers work fine. My conclusion at this point is a failed jack but I'm at a loss to explain why one set of earphones work perfectly while two two others don't. Any insights out there??? Many thanks, Bill

Sounds like the port has gone bad, maybe from some schmutz getting jamed in there over a couple of years. Try blowing it out with canned air. Or cleaning it with alcohol (no water based solvents). You might have to surrender and get it replaced. I doubt Apple will repair just the jack. A replacement iPad 2 will cost you mid-200's through Apple, and you'll get a refurbished one with a full warranty.

Similar Messages

Hi, i need help, okay..my issues is that since the lastest update for the ipod touch, my music lihow can i get the itunes main music playlist to appear the same on my ipod touch?

Hi, i need help, okay..my issue is that since the lastest update for the ipod touch, my music list is all over the place....my question is how can i get the itunes main music playlist to appear the same on my ipod touch?

Hi Lawrence,
Thanks for your prompt response, however I have first seen it now. I have placed an active SIM card in the iPhone turned it off and on. It now says SIM locked, please write access code. The problem is I don't remember the password. When I connect it to iTunes it tell me that I have to write the password before it can be used with iTunes...... Do you have any good ideas? I see you are from the NYC area.... used to work there back in the early 90´ Those were good days..... What a City

I am unable to use Iboost app, when i try to use it, I get an error "iBoost App is damaged" and reinstall from app store. I get the same error even after installing a fresh copy. Need help to resovle this issue.

“iBoostUp.app” is damaged and can’t be opened. Delete “iBoostUp.app” and download it again from the App Store.
Because of the above error, i am not able to use iboostup application. I have even tried to reinstall from app store, but the issue still continues.
Need help.

Perhaps the damaged file is an auxiliary file outside the app bundle and stored elsewhere on your Mac. Try deleting the app and all it files with an app for that purpose. Afree one is AppCleaner;
http://www.freemacsoft.net/appcleaner/

I'm a Noob, and need help solving a backup issue.

I previously had an Alienware PC with a 1TB harddrive. I backed up to the cloud using Carbonite.
I decided to get a new laptop and got a MacBook Pro with Retina. It only has 128GB harddrive. My plan was to use a 2TB external harddrive and back up both using Carbonite. Well, turns out Carbonite only does external harddrive backup with PC's not Macs. So, I need help.
I have way more files than can fit on my laptop that need to be accessed and backed up on a regular basis, so it would seem time machine isn't the solution.
What do you do? or would you recommend? What is the best way for someone like me who wants continual access to and backup of a large amount of data? Are there any good cloud based solutions you would recommend?
I appreciate your help!

CMCSK
Bulletproof backups:
The MOST important part in that link was the titled portion marked: Make backups for your backups
My list for the original poster:
Never consider any computer a data storage device, rather a data creation ,sending, and manipulation device. Anyone who thinks data is safe on any computer, even copied upon multiple partitions is making a mistake.
Never backup your data exclusively upon magnetic hard drives or flash storage, nor consider same since magnetic storage degrades over time even under ideal conditions.
Store important data on multiple servers on multiple continents.
Burn important data onto multiple copies of archival DVDs and store same in cool dark fireproof safes, hidden places, secret places, multiple places.
Don’t burn data onto junk DVD’s purchased from consumer level electronics stores. These are not archival long life DVD’s nor reliable, nor trustworthy
When data can be made to be everywhere, then there is nowhere it can be erased or destroyed.
Most importantly know that 2 copies of your data is 1, and 1 is none, and 1000 copies stored in one place or building, is also the same as none when a fire occurs.
Always consider and expect your computer’s hard drive to completely crash anytime, at all times, and thou shalt keep a cloned and updated hard drive handy at all times to return to immediate productivity and avoid program and parameter reinstallation and tweaking.
When your data is decentralized, it becomes both everywhere and nowhere, accessible to all, destructible by none, cannot be collected together or permanently retrieved under any circumstances.

Just Switched To Mac's and Need Help With A Few Issues!

Hi All,
I finally did it and switched to a Mac!! Never thought it would happen as I always felt guilty about the cost but after 5 laptops crashing on me - well, I just could not take it anymore! I managed to get a fairly good deal on a 15" Macbook Pro - 2.2/120GB version. I still don't know much about the mac way but am trying to learn so any help would be appreciated!
1). Is there any kind of video tutorial (preferably free!) that I can use that will help me learn the Ma OS X? I have Tiger 10.4.11 on my MBP (Did you hear that - MY MBP!!!)
2). AOL Assured me that they fully support Mac before I purchased (only 5 times!) but after I had bought it - they then told me that they do not! I got the AOL disk for Mac but it kind of ***** - features are missing etc. Does anyone in the UK run their Mac's with AOL and does it run as per normal? Any advice with AOL & Mac?
3). AOL also told me - hey, no probs - of course you can transfer all your old emails, favourites folders, personal filing cabinet from a PC to a Mac - but then, after I bought it - the so called dedicated Mac Experts at AOL tell me that simply is not possible - What advice can anyone give me who has switched from PC to Mac with AOL and who needed to transfer all their stuff over? AOL tells you totally different things depending on who you talk to and even from what their web page state! I am really fed up with them!
4). If I am ever successful in getting all my many years worth of data from AOL on a PC to a Mac, I am really intent of changing ISP's - what are the best ones for Mac that offer good Mac support, good deals and no charges for telephone support?
5). I was initially happy with Tiger as again, AOL assured me they supported it but not Leopard (even their website says so) and as I stupidly thought that it must be true (we are talking AOL here!). Now I know that they don't support anything Mac, I am contemplating moving to Leopard - I am a little cautious as I heard there were/are many bugs and unhappy leopard experiences - have the majority of these been solved yet and is it advisable to change to Leopard or should I wait until an updated version comes out?
6). My MBP was originally bought in the US but is registered to my name in the UK. it has 6 months Apple warranty left and I wish to buy Applecare. Apple says it 'recommends' buying Applecare in the country at which the item is registered (not bought, as I understand it). Does that mean, if I buy Applecare in the USA, Apple UK will still accept it and service my MBP as they would do any other or will I have to have the hassle of sending the thing to the USA if it needs attention? Applecare USA T&C's state only for the 50 States & Canada and Applecare UK state only for the UK & EU. Both however state international servicing?! I am a bit confused on this one. I travel a lot and need to know, that any Applecare I buy will not then be limited to just the places they state in the T&C's. As It reads to me, Applecare purchased in the USA/Canada will not cover the UK/Europe/ROTW and vice versa. Is this true or am I missing something or just plain thick?
5). I really wish to upgrade the 120GB HDD. My understanding is that it must be done by either Apple (who charge really silly money) or if correct, at an "Authorized Apple Service Provider" who of course will be much cheaper. If true, does this mean at ANY authorized apple service provider on the planet or just ones in which the item is registered? If I do the upgrade with a service provider, will Apple then also service the new HDD if something goes wrong as per normal anywhere in the world or will they then say, sorry, will not service the new HDD and you have to go back to the place where you had it installed, even though it was one of their authorized service centers? (that would really suck)!
6). The spelling and dictionary (and a few other things) are set to US English - how can I set to UK English? I have tried but to no avail so far.
7) What and how should I set the Firewall settings so I will not get attacks by any form of malware? (I do not know much about this area and what the implications mean)!
Well, that's it so far - please bear my ignorance, I am so new to Mac's and hope this to be one of the smarter decisions I have made in life! Already I have strange sensation that I never had with all those years of Microsoft & PC's - I kinda feel reassured, safe, that if I have problems, they will get sorted, My life will now be easier and not having to worry so much about crashes, viruses, trojans etc, gives me a sense of liberation and contentment almost - very strange feeling but a **** good one! (if only the women in my life were like that)!
Thank You All From A PC to Mac Switcher (and NO! I do not feel guilty or scared anymore)!
SuaveBhav!

I can help you with your questions about AppleCare, and can also reassure you that both the macbook pro and Leopard will be worth your investment and the time you are putting into figuring out how to get your data across. I switched from windows when I bought my macbook a year and a half ago and would not use any other system now. The other day I completed the transition by erasing parallels and Windows from my system entirely.
As for AppleCare, you can get warranty care anywhere in the world, no matter where you buy your AppleCare. Mine was bought and is registered in the US, I live in Slovakia, and have had it serviced several times in Austria and Slovakia under the warranty without any problems at all. There are differences, however, in exactly what the warranty covers from place to place, in accordance with the law in each place that AppleCare is issued. Even though I live in the EU, my agreement with Apple is an American one, and the American guarantees hold. If EU law would demand that Apple fix more things, for instance, than American law does, I could not get those things repaired under my agreement, and vice versa.
Basically, though, I understand my agreement with AppleCare to be that they will fix all problems/damage that are not my fault free of charge for two years after my initial one-year warranty runs out, and that is good enough for me.

Need help with an innerjoin issue

Hello;
I am writting a small app for my web site and have run into
an issue with an innerjoin. Let me explain what the function is for
this so maybe you can understand what I am doing.
There are 2 pages to this. Page 1, is a category selection
page. It loads all the categories on the page with a link that
passes a category ID to page 2. Page 2, then allows you to view all
the projects that are associated to the specific category. There is
a numbered navigation on this page, kind of like google, 1 2 3 4
More> Next>
Now what I am trying to do it create a select function that
allows you to choose another category to look through on page 2 so
you don't have to go back to page 1 and select another category
there.
Right now, I have the innerjoin working well with page 1
going to page 2 and the numbered nav, it is doing what it is
supposed to. BUT the select function is working off the where
clause and not working independantly from what the numbered nav and
body is supposed to be doing. There is also a spot I added to this
page that kind of works like the select function, it puts the name
of the category your viewing on the page.
What is happening with the select function and this name
function is lets say there are 5 project records tied to the
category you selected, then the select function gets 5 names of the
same category in it and so does the category name function.
(Follow this?)
Let me post the code for page 1 and page 2. also will add
what the tables are in the db.
DB tables:
Table1: Categories
Name (this is the actual category name), MYFile(the file that
give an image of the category), Description(a description of this
category), CategoryID (this is added to the projects table for each
project that is connected to each category)
Table 2: Projects
ProjectID (this is the ID of the projects), Name (this is the
name of the project) Body (thi sis the description and picture of
the project), CategoryID (this is the id of what category the
project falls under, also assigned to tproject from the categories
table)
There is a lot of code that goes in this, so I am going to
post the code that is pertinent to this question, 90% of it is
working at this time, just not the select function and category
name on page 2.
Page1 Code:
<CFQUERY name="GetRecord"
datasource="#APPLICATION.dataSource#">
select Name, MYFile, Description, CategoryID
FROM Categories
</CFQUERY>
<head>
</head>
<body>
<cfloop query="GetRecord" startRow="#URL.startRow#"
endRow="#endRow#"><cfoutput>
<img src="../img/cat/#MYFile#" width="50" height="50">
<a
href="portfolio-detail.cfm?CategoryID=#CategoryID#">#Name#</a>
#Description#
</cfoutput></cfloop>

Page2 code:
<CFQUERY name="getProjects"
datasource="#APPLICATION.dataSource#">
SELECT Projects.ProjectID, Projects.Name, Projects.Body,
Projects.CategoryID,
Categories.CategoryID AS catID, Categories.Name AS cat_name
FROM Projects
INNER JOIN Categories
ON Categories.CategoryID = Projects.CategoryID
WHERE Projects.CategoryID = #categoryID#
ORDER BY ProjectID
</CFQUERY>
<cfif getProjects.recordCount is 0>
No projects in this category.
<cfabort>
</cfif>
<head>

<script language="Javascript">
function changeRecord(){
document.category.submit();
</script>
</head>
<body>

<cfoutput
query="getProjects">#cat_name#</cfoutput>
<form Name="category" method="post"
Action="portfolio-detail.cfm?CategoryID=true">
<select name="CategoryID" size="1"
onChange="category.submit();">
<option value=""> --Select a Category--
</option>
<CFOUTPUT query= "getProjects">
<option value="#CategoryID#">#cat_name#</option>
</CFOUTPUT>
</select>
</form>

<cfoutput query="GetProjects" startRow="#startRow#"
maxRows="#maxRows#">
#Name#
#Body#
</cfoutput>

<cfmodule
template="../CFdocs/PageNav.cfm"
totalItems="#numRows#"
numPerPage="#maxRows#"
startRow="#startRow#"
url="#cgi.script_name#?categoryID=#categoryID#&startRow=#startRow#">
The main part that is not working properly is the select, and
category name. How to I get those to work independantly from my
where clause? (I need the where clause for the numbered nav and
cycling through the projects tied to the category you called up
from page 1.
Can someone help me tweek my code from this point? I am
stumped, I looked at the cf docs and I can't find a solution. I am
using CF 8.
Any help would be appreciated. Thank you!
CFmonger

I fixed a lot of this since I posted it this morning. Now all
that isn't working properly is the select, it isn't passing the
proper variable to make the query work.
This is what I have now:
Page 2:
<CFQUERY name="getProjects"
datasource="#APPLICATION.dataSource#">
SELECT Projects.ProjectID, Projects.Name, Projects.Body,
Projects.CategoryID,
Categories.CategoryID AS catID, Categories.Name AS cat_name
FROM Projects
INNER JOIN Categories
ON Categories.CategoryID = Projects.CategoryID
WHERE Projects.CategoryID = #categoryID#
ORDER BY ProjectID
</CFQUERY>

<cfif getProjects.recordCount is 0>
No projects in this category.
<cfabort>
</cfif>

<CFQUERY name="cata"
datasource="#APPLICATION.dataSource#">
select Name, MYFile, Description, CategoryID
FROM Categories
</CFQUERY>
<head>
<script language="Javascript">
function changeRecord(){
document.category.submit();
</script>
</head>
<body>

<cfoutput query="getProjects"
maxrows="1">#cat_name#</cfoutput>

<form Name="category" method="post"
Action="portfolio-detail.cfm?CategoryID=#CategoryID#">
<select name="CategoryID" size="1"
onChange="category.submit();">
<option value=""> --Select a Category--
</option>
<CFOUTPUT query= "cata">
<option value="#CategoryID#">#Name#</option>
</CFOUTPUT>
</select>
</form>

The error I get when using the select is this:
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error
(missing operator) in query expression 'Projects.CategoryID ='.
The error occurred in C:\Websites\folio\portfolio-detail.cfm:
line 12
10 : INNER JOIN Categories
11 : ON Categories.CategoryID = Projects.CategoryID
12 : WHERE Projects.CategoryID = #categoryID#
13 : ORDER BY ProjectID
14 : </CFQUERY>
I also tried doing it this way:
<form Name="category" method="post"
Action="portfolio-detail.cfm?CategoryID=true"
This way didn't work at all, it only made the numbered nav on
the page cycle through all the projects in all the categories.
What do I need to change to pass the proper variable from the
select nav to the innerjoin query and my where statement?

Need help on resolving the issue with adobe output server - error MSG256 & MSG 210 not in .ini file

Hi,
I am using adobe output designer 5.5 for designing the label template and using the Adobe output server for printing process.
In the Jfmerge.ini we given the condition "DiscardUnknownFields=Yes" for ignoring the unwanted fields in the .dat file.
During the process, I faced some issue with the output server in printing the labels.
When the .dat file is placed in the Data folder of adobe, the label is not getting printed in the printer.
The file is move to the error folder and an error file is getting generated which contains the error message as given below:
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [256]** Message Msg256 not in .ini file **
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]** Message Msg210 not in .ini file **
2009/08/26 02:59:02 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [210]** Message Msg210 not in .ini file **
The output server is a new installtion and I verified the Jfmerge.ini file. It contains the message details of Msg256 and Msg210.
I also verified the license and it is a valid licence.
Kindly help me out in solving this issue.
Thanks
Senthil

I assume this is too late to help you, but other might need a hint. I had the same problem, and found some possible causes that I posted on http://codeznips.blogspot.com/2010/02/adobe-output-server-message-msg210-not.html.
It is quite likely that you are missing some double quotes around the path specifying the ini file (-aii), if its installed under "Program Files".
Hope this helps anyone....
Vegard

I need help with a mapping issue.

We have a number of websites setup so that they are all under the default website in IIS 7. We use ISAPI/ReWrite/3 to process and take it to the correct page to view. Unfortunately this does not work so well with CFAJAX or CFFILEUPLOAD. Can anyone help?
Example:
Local Directory: D:\sites\website1\index.cfm or D:\sites\website2\index.cfm
URL: http://website1.preview.domain.com/ would show a different website than http://website2.preview.domain.com/
ISAPI ReWrite code:
RewriteCond %{HTTP:Host} ^(?:.*\.)?website1\.preview\.domain\.com|^(?:.*\.)?website1\.new\.preview\.domain\.com|^( ?:.*\.)?website1\.office\.preview\.domain\.com$
RewriteRule (.*) /website1$1 [NC,L]
and the same with website2, only it has website 2 instead of website1.
However, when I use CFFileUpload it creates the parameter as: 'http://website1.preview.domain.com/website1/upload/process.cfm'
I have tried to replace the code when processing the template and the page content, but it does not replace it. It must happen last, even after I do a <cfsavecontent>
I need it to show up as http://website1.preview.domain.com/upload/process.cfm
Can anyone help me with either an idea to use in the ISAPI/ReWrite or some other change I can make?

The issue comes down to the fact that in the Coldfusion Administrator I set the Settings > Default ScriptSrc Directory : http://10.4.3.80/CFIDE/scripts/, because http://website1.preview.domain.com/cfide/scripts does not exist.
This works for cfchart, but when I look at the source for any flash stuff, it still puts just "/CFIDE/...", which is trying to pull from http://website1.preview.domain.com/CFIDE/..., which doesn't exist, and it shows http://website1.preview.domain.com/website1/upload/process.cfm (which does not exist) instead of http://website1.preview.domain.com/upload/process.cfm like it should. Everything else works on the website, all coldfusion stuff (although, I do convert some of the links and things in my page so that they work properly). However, I can't find a place to replace links when I use a cffileupload, it puts that in very last, so my links are messed up.
The nicest thing would be a setting that I could set the cffileupload to know what the path is. If that is not available, then I need to write a ISAPI/ReWrite line to redirect it.

Need help in Address inconsistency Issue.

Hi Folks,
Need your help in this Issue.
We are getting an Error ---- "Person-address" data doesn't exist while correcting the Address inconsistency through transaction BP in SAP SRM 7.02.
Kindly suggest any SAP notes on this specific issue.
Regards,
SRM User.

Hello Keith,
Yes, I have 2 structures in the Query, with Posting periods structure is in the rows restricted by periods and Key fig structure.I did the way you said, but it is not working.
Regards,
PNK

Need help with expression builder issue

Hi all
I'm hoping someone can help with an issue I'm having. I'm creating a database for a manufacturing joinery. For 1 of my forms, Ive to create a despatch form which includes order details along with customer details. Some customers can have contracts in which
they get a fixed price on certain item. This is where the problem lies.
For my customers table, I have a field called "On contract" which is a Yes/No field. I've created a query to attempt to make this form. I'm having trouble with adding a total column at the end of this query. Quantity,Unit Price, Contract Price
are also in the query. I've been trying to build an expression to say like;
iif [on contract] = "Yes", [Quantity] * [Contract Price]
iif [on contract] = "no", [Quantity] * [Unit Price]
It obviously wont work, what am I doing wrong?
Thanks in advance

Hi,
Assuming you are using the database is SQL Server:
SELECT [CustomerID]
,[Quantity]
,[Unit Price]
,[Contract Price]
,[Total] = CASE WHEN [On Contract] = 'Yes' THEN [Quantity] * [Contract Price]
WHEN [On Contract] = 'No' THEN [Quantity] * [Unit Price] END
FROM [Customers]
Modify the SQL to suit your need.
Hope this helps.
~J.

Need help on Nexus Bizarre Issues

Hi,
I hope anyone can help as I am experiencing bizarre issues on Cisco Nexus 5548UP running version 5.1(3)N1(1) with Layer 3 daughter card. There are numerous issues, which I have experienced so far and would appreciate if someone can guide. I have never seen as such issues on Catalyst switches.
Issue 1:
L2 Port-channels between the two Nexus are failing. Nexus interfaces part of channel-group are being suspended. Please see the two Nexus configuration below and would like to highlight I have another pair of Nexus with the same configuration working without this issue so far (I have not rebooted them yet).
Nexus A
interface port-channel100
description LAYER2-INTERCONNECT NEXUS A TO NEXUS B
switchport mode trunk
no shutdown
interface Ethernet1/31
switchport mode trunk
channel-group 100 mode active
interface Ethernet1/32
switchport mode trunk
channel-group 100 mode active
Nexus B
interface port-channel100
description LAYER2-INTERCONNECT NEXUS B TO NEXUS A
switchport mode trunk
no shutdown
interface Ethernet1/31
switchport mode trunk
channel-group 100 mode active
interface Ethernet1/32
switchport mode trunk
channel-group 100 mode active
In addition, I have another port-channel configured on both Nexus as Layer 3 which does comes up something after rebooting the Nexus three to four times (looks like depends on the mood) and yes the feature lacp is ON. No matter whatever I try, the etherchannel never comes up. I have tried different ports and cable to rule out interface issues.
Issue 2
For some wired reasons, Nexus is putting a Trunk P2P link between the two Nexus (whereas one configured as Root Primary and second Root Secondary) into blocking estate and the only way to resolve the issue is by doing the reboot. However, there is a problem that sometimes Nexus will need two or three reboots in order to overcome the issue.
Issue 3
HP SAN nodes stop responding due to Nexus not able to learn the arp of the nodes. Whereas Nodes are not able to reach (ping) the gateway. Solution is rebooting and it does work after that.
Reboot is not the solution as I plan to use Nexus for SAN and routing between the DC and seriously need a solution.
Any help/advice will be much appreciated.

Please find attached Nexus A and B configuration. I managed to bring up the Channel-group using the same commands in attached configuration with addition of "spanning-tree port type normal". If the issue reappears, which I am sure it will because we will be rebooting the Nexus for failover testing, I will collect the logs for you. Trunk works if I use a single interface without channel-group however sometimes spanning puts the interface into P2P blocking even though it is point-to-point.
At present, my bigger concern is Adaptive load balancing on SAN nodes. We using Rapid Per-vlan spanning tree and having an intermittent drops when the HP Lefthand (10 Gbps) is running Adaptive load balancing. Majority of the time there is a packet drop until we shutdown either the Nexus A or B interfaces connected to nodes. It does work sometimes without a packet drop but as soon we restart Nexus A for failover testing, intermittent drop reappears. HP4300 is having issues in either way. We are still in testing phase and project deadline is getting closer.
SAN is using two IP addresses and after interface bonding (adaptive load balancing) it uses a single IP address.
I have run out of options, I have tried almost everything but issue persist. Is there a trick on Nexus to make the Adaptive load balancing work for HP SAN nodes? Or it could be the driver issue on SAN nodes? Our setup is quite straightforward but still having issues.
Lastly, it is all Ethernet, no FC or FCoE (it was not my decision)
Please find attached diagram as requested and many thanks for your help, much appreciated.

Need help with bluetooth headphones playback

I have recently began to use Motorola S305 bluetooth headphones on my desktop computer. The headphones synch and work for playback of other audio, however, they do not play back when I listen to iTunes (upgraded to iTunes 9 today).
I have checked and re-paired. When I test using the control panel or Windows Media Player, the headphones playback audio, however, when I play iTunes the sound reverts back to computer speakers.
I would appreciate if someone could help me figure out how to get my headphones to work so I can get the full benefit of the purchase.
Thank you

Topher,
I had the same problem too, but with a different headset...after some google searching and playing around, I found the solution. When your bluetooth headphones have a microphone, it actually uses a different service then the "stereo headphones" feature. When quicktime starts up in any capacity, it seems to default to whatever service that uses the microphone, not the speakers. All you need to do is change your microphone input to something else in Quicktime and it then defaults to the same playback service as everything else.
Find the quicktime player on your system and open it up. Under Edit -> Preferences -> Quicktime Preferences, select the Audio tab. Click the "Select Audio Playback Devices" button.
At this point, if you select your "Test Hardware" button, and you run through the test, I noticed that my microphone was recording, but my headphones were not playing back.
All I did was change the "Voice Recording" default device from the microphone device in my headphones to my computer's built in microphone. Save all changes. You should notice that when you hit the "Test Hardware" button again, everything works as advertised.
Hopefully that helps. It might be problematic if your bluetooth headphones have an included mic that you wanted to use in Quicktime. Good luck!

Need help trouble shooting mail issue

Mail issue started when the compter (imac intel, g4, os 10.6.8) said it needed to restart during a mail download. I restarted, then the mail program would not stop downloading older messages. I went online and followed a whole bunch of suggestions, which only made matters worse (preferences... drag com.mail.plist to desktop, add it back, rebuild mail) nothing worked. I then trashed the mail program, and trashed some of the mail cache (not wanting to lose preferences, I lett this cache). Then mail I could not access mail without the set-up assistant showing on screen. So... (digging a deeper and deeper hole!) I tried to restore mail from my time machine back-up (severl days prior to issue) and it did not help. I then reinstalled applications from snow leopard... not helpful. I then figured I could use migration assistant to copy my working mail program from my mac pro and this did not solve the issues. Of course all of this taking me away from my Christmas shopping:-)
So, I tried to set it up manually, but the program will not save the password and it keeps asking for the password but rejecting it each time.
Any ideas??

Thanks for your suggestion regarding contacting Apple. I called the Express service and talked for a couple of hours trying to resolve the issues.
One, to deal with the password issue, Keychain Access > Preferences > click on Reset My Default Keychain, close.
For the original issue of mail downloading messesges from my server every time I checked mail,
Library > Mail folder > messagealreadydownloaded3 > drag to trash. Issues resolved!!!
As for creating a pretty good mess... well all I can say is that I was following suggestions from other users that have posted online with similar issue. Lesson learned??? Not sure if there was one:-)

Need help to solve Wireless issues

Hi guys,
I have a DSL connection with a very poor quality router (ISP provider needed). But when reaching 10 wireless users my network goes down so I’m looking a solution to expand my Wi-Fi capacity. I read that a Wi-fi router can help me, my question if this is correct and what options can I found here in Bestbuy in order not only to solve me capacity (maybe up to 30 concurrent users) but also I want to manage bandwidth for every connection.
Thanks

Up to 30? Just a guess, but are you perhaps a business owner?
At any rate, for 30 users, I'm almost tempted to steer you towards a business class WiFi router. Granted, yes, a "commercial" router will work, but a business class might also have options to limit bandwidth per user as well.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

New to Flash AS3, Need help with some weird issues, have .fla link attached...

Basically, the buttons are not visible when siteplan_mc is replayeed after floorplan closes, but they still work. Most things are only working on double click for soe reason, tho I have them to function on click. and the back button only woorks on unit 1 floorplan, tho the code it the same for all floorplans. I have a feeling it has something to do with levels... but I really have no idea... hopefully someone can help!
thanks in advance,
Sarah
http://www.30eastroosevelt.com/RRHA_SITE.fla

There are at least two things you're doing wrong. You can't go to a frame where something exists for the first time, and immediately do something to it. Like in your playunit functios for example:
gotoAndStop("unit1")
unit1_mc.alpha = 1
unit1_mc hasn't yet drawn itself on stage to have its alpha set, and so there's an error. That is something that was improved in Flash 10, so if you had set the Flash to publish for Flash 10 and not Flash 9, then the floor plans and the back buttons appears ok. It would sometimes work with double clicks because by the second time you clicked, the movieclip now existed. You might be able to do what you want by having all of the room units on frame 1 of the siteplan_mc, and then set their visible to true or false as you need them, instead of doing the gotoAndStop().
The other problem is that you're trying to set listeners on the Back buttons that don't yet exist. Wait until you're on the frame where the buttons exists, and then set its listener for the mouse click.
Other things you're doing could be improved too, but really you might want to get together with someone who has done more AS3, to help you become more familiar with how it works.

Need help: iPad2 jack/headphone issue

Similar Messages

Maybe you are looking for