Need Help on cffile upload, destination to another server

Anyone know why get this error? The specified directory attribute value Z:\Project_X\UploadFile\DlrPayInq\ could not be created.
The setup of my server is as below : -
I'm trying to use cffile to upload a file where by the destination i declare is located at another server which is my file server.
i had create a mapping from my application server to the file server as Z:.
<cfset dlrPayInq_w = "Z:\Project_X\UploadFile\DlrPayInq\">
<cfif trim(fileName) NEQ "">
     <cfif directoryexists(dlrPayInq_w)>
<cfelse>
    
    <cfdirectory action = "create"
    directory = "#dlrPayInq_w#">
</cfif>
<cffile action="UPLOAD" filefield="fileName" destination="#dlrPayInq_w#" nameconflict="overwrite">
I had grant the folder permision to User type USER with Full Control, i can login as a normal window user and create files at Z:\Project_X\UploadFile\DlrPayInq\ manually.
But when i try to upload file using cffile in my program, i hit this error The specified directory attribute value Z:\Project_X\UploadFile\DlrPayInq\ could not be created. Actually the folder DlrPayInq is already exist in that fileserver, how come CF trying to create again?
I try to remove this code
<cfif trim(fileName) NEQ "">
     <cfif directoryexists(dlrPayInq_w)>
<cfelse>
    
    <cfdirectory action = "create"
    directory = "#dlrPayInq_w#">
</cfif>
and i get another error, CFFILE atttribute error.
Any expert can help? Thanks for advanced.

To expand on tclaremont's reply. "Z:" that you are using is a mapped drive and mapped drives are user specific. So as well as making sure that ColdFusion is running as a user that has permissions to the remote server, you would have to log into the server using ColdFusions user account and create the mapped drive under that user.
Most people don't bother with mapped drivers but rather use UNC path syntax. Which would looks something like "\\MyRemoteServersName\Project_X\UploadFile\DirPayInq\"

Similar Messages

I need help modifying my iWeb site from another Mac than the one it was designed on:

I did exactly as directed in the Help file "to Modify your site from another computer", but when I click on the Domain file it launches iWeb to start a new website without anything from the site I created. The Macs are a mirror image of each other with the same iWeb version 3.0.4. I am transitioning from my MacBook to my new iMac, so the laptop files were all transferred to the iMac by the Apple Store when I bought it. The only difference is that the laptop is OS 10.6.8, and the new iMac is OS 10.7.5. After the transfer of all the files at the store, I proceeded to make the website on the laptop, but now need to work on the website from my iMac...but I need help getting the file to work on the iMac.
PLEASE HELP!
Thanks!

The trick that solved it for me was the last note about how to make the hidden folder appear (due to Lion OS 10.75):
Note for OS X Lion users :
To show the hidden Library folder in the Home Directory (Cmd-Shift-H) hold the Option (=Alt) key when choosing theGo menu in the Finder.
Thanks!

Need help how to upload a PDF to an internet site

I'm applying for jobs on my iphone 5 and some websites need me to upload a resume... I click upload and my photo album comes up! I have PDFs of my resume saved on an app but I can't work out how to upload them on the websites? Any1 know an App or solution

Duplicate post NEED HELP: HOW TO OPEN A PDF IN ESS (EMPLOYEE SELF SERVICE)
--Shiv

Need help with URL Redirect in Sun Web Server 7 u5

All I am trying to do is redirect to a static URL and for the life of me I can not get it to behave the way I would expect. I am new to Sun Web Server so I am just trying to use the Admin Console to set this up.
Here is what I'm trying to do:
Redirect from - http://www.oldsite.com/store/store.html?store_id=2154
To - http://www.newsite.com/Stores/StoreFront.aspx?StoreId=2154
Here's what I tried in the console.
Added a new URL Redirect
Set the Source to be Condition and set it to: '^/store_id=2154$' (quotes included)
Then set the Target to: http://www.newsite.com/Stores/StoreFront.aspx?StoreId=2154
Then for the URL Type I checked Fixed URL
When I tested with: http://www.oldsite.com/store/store.html?store_id=2154 it did redirect as desired
BUT
When I tested with: "http://www.oldsite.com/store/store.html?store_id=5555" it too got redirected to the Target and I can't figure out how this second URL can satisfy the condition to get redirected.
Any help is most appreciated.

thanks for choosing sun web server 7
it is simpler if you just edit the configuration files manually
cd <ws7-install-root>/https-<hostname>/config/
edit obj.conf or <hostname>-obj.conf (if there is one for you depending on your configuration so that it look something like)
<Object name="default">
AuthTrans..
#add the folllowing line here
<If defined $query>
<If $urlhost =~ "/oldsite.com" and
$uri =~ "/store/store.html" and
$query =~ "store_id=2154" >
NameTrans fn="redirect" from="/" http://www.newsite.com/Stores/StoreFront.aspx?StoreId=2154
</If>
</If>
..rest of the existing obj.conf. continues
NameTrans...
now, you can either do <ws7-install-root>/https-<hostname>/bin/reconfig -> to reload your configuration without any server downtime or <ws7-install-root>/https-<hostname>/bin/restart -> to restart the server
if it did work out for your, you will need to run the following so that admin server is aware of what you just did
<ws7-install-root>/bin/wadm pull-config user=admin config=<hostname> <hostname.domainname>
hope this helps

Need help with Outlook 2013 connecting to Exchange server(2010)

Hi
I need help with Outlook 2013 and with my exchange server(2010) email account
After setting up account initially emails come in and than after an hour or two stop. My OWA is working fine with no issues. I have even created a forward rule in OWA to my GMAIL account whch works fine
However Outlook 2013 is not syncing messages, have difficulty in sending emails sometimes as it takes too long. In fact the connection also is intermittent. Even if the task bar shows connected to exchange, it seems that is not the case since new emails
and any emails I compose dont work. I have trouble shot the issue with my ISP and email service provide, but they havent resolved the issue I have also done a TraceRoute and that shows no drops or problems to he exchange server.
Can someone please help me resolve this matter so I can continue to use Outlook 2013( running Windows 8.1) in both my computers which have the identical problem
Look forward to a solution soon
Thanks

Hi Angela
Thanks for your message
To answer your questions, please note the following
a) My account is set up in Cache Mode( not online mode)
b) I am the only other user on the account
c) When the connection to the exchange server is broken, I see upon clicking connection tab that there is no information in the box, and when I press reconnect it starts showing "connecting"
d) When the connection to the server is there, it shows connection as "established"
e) Sorry I dont understand th meaning of CAS array in your environment? Can you pls explain
Since yday I have been using Outlook 2010 on desktop and Outlook 2013 on my laptop using Exchange 2013 account. So far all emails are syncing, and I can send emails from both computers. However, I am concerned that the connection can break-off anytime,
as it has done that in the past on both outlook versions. The max time it has worked without any problem is 48 hrs and than after that the same issue of not connection, not syncing and unable to send emails happens
My ISP has checked and there is no network connectivity issues. My email service provider has trouble shot the issue many times, but to no positive results. I have also changed the profile a few times, but the intermittent connectivity problem hasn't
been resolved.
Can you identify the possible causes and more importantly a working permanent solution please
Thanks
Mahesh

Need help - script to continue text in another field if necessary

Wish I could attach my form but it's not available. I am using Adobe Acrobat 9.0. I have a form with two text fields for "Other" information that needs to be shared. If the user types in more characters than the box holds the overflow text doesn't print. These are court documents and all the text has to print somehow. I am trying to figure out a work around for this and wondered if a script can be written to put the extra text from each "Other" field into another field that would open on a new page at the end of the document if necessary. I want to avoid having extra empty pages however so if they can be added ONLY if the text needs to overflow. I hope I explained this okay, like I said I wanted to upload the form but can't. If someone can help me with this I would really appreciate it.

LiveCycle is a part of Acrobat Pro Extended - Windows users only, not Mac.
OctRita wrote:
… would it be possible to have a page at the end with a text field for each of the ones that need overflow to print and can a javascript be written to put the extra text into those fields?
Yes, it is possible - I've already indirectly provided you with the code for that via the link in my post. Just remember to save it to your desktop:
http://www.adirect.dk/adobeforum/commentfields.pdf
As an alternative you could remove the limited characters, set the field to multiline and make a script that set the textsize to auto if the user fills the field with text. When textsize is set to auto, the text will keep on shrinking as user types more text.
Torben.

Need help on File uploading in JSF

Hi All,
i have to upload some document into IBM DB2 Content Management using JSF Portlet.
Is it possible to upload a document( in my case it is an image) using JSF Portlet into IBM DB2 Content Management? and also i need to keep the reference of the uploaded document in DB2 database.
i need some sample code to do this.
the tools i am using are
RAD 6.0 as IDE
IBM DB2 Content Managener 8.3
IBM DB2 8.2
its an urgent requirement please help me out in this regard

If it's possible in Portlets i don't know, but in JSF is possible with the Tomahawk component to upload files.
See
www.myfaces.org
Try it.

Need help with video uploading in flex 4

hey guys... so i need to create a video uploading application... with video chunking...
basically i need to break up the video file (may be 1Gig or more in size) in pieces and send it to the server using a method i call from my webservice...
any ideas??
i believe this process is called chunking... not sure how to do this...
thank you very much in advance!!!

dude. some time itunes just doesnt support drag and drop techniques . just try the simple copy and paste(ctrl(c+v)). if that file is gonna be played on the ipod u get a small tab box in the itunes that the file which u r copying is being processed .
even if this technique doesnt work , then thats a faulty format . u can try another video converter . say videora or Aplus video converter . u will find them in www.download.com

Need help : how to upload high resolution pictures

Hi, can anyone help me out with this. whenever I'm adding any pictuers to my site they looks kinda cr*py. the reason it because it's resizeing the image to a much smaller resolution.
question :
1. how do I upload a full res. image?
2. also if anybody knows how I can prevent people from downloading those images?
- thanks in advance
Maruf

Maruf ~ Welcome to the discussions.
1. iWeb > Preferences > make sure +“Optimize images on import.”+ is deselected.
2. It may not be possible to prevent people from downloading your images — but you can watermark them. Let me... Well, see for yourself by clicking here.
Another trick is to place a transparent, borderless Shape over your images.

Just bought new time capsule- need help setting up WiFi network with another router

Here ismy situation.
I had a wireless network setup up at home using a Belkin wifi router.
I have 2 macBooks (1 pro, 1 air) and 2 iphones that connect wirelessly and a desktop PC that is hard wired to the ethernet port. In addition, I have a Verizon wireless network extender plugged in by ethernet. All of the hard-wired gear is in our 3rd floor attic office (and the wireless signal was strong throughout the house).
The Belkin wifi router was plugged into a wall ethernet jack that is in turn wired into a Linksys router in the basement (along with multiple other ethernet ports througout the house) and is hardwired to the Cable modem next to it. All of the hard-wired ethernet stuff (including the router in the basement) was there when we bought the house, and I have no clue in the tangle of wires how to sort them out (but don't really think I need to)
I just purchased a TimeCapsule to do wireless backups of my 2 macbooks, and tried to set it up alongside the existing wireless modem.
Needless to say, this did not work well. I called AppleCare, and was told that the TimeCapsule needs to be the "1st" wireless adapter, so I went into the basement, and connected the time capsule directly to the cable modem, and then out to the basement router. The Belkin router still needs to be in the attic to supply the PC and the Verizon adapter (so it is near a window for GPS signal).
If I try to name the WiFi network the same SSID on both the TC and the belkin router (to have dual signal strenth coverage) the whole thing gets messed up and the TC cannot be "found" by the aiprort Utility software.
What I have done now is that I have 2 side-by-side wireless networks with 2 unique names (actually 3, because I enabled the 5Ghz signal on the TC), but our wireless devices do not "switch" automatically from one SSID to another stronger signal SSID as we move through the house
Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal? I understand it involves switching the "channels" but don't know how to do it right now. Currently, everything works, so I don't want to mess it up tinkering. Another caveat- there are several other wireless networks from neighbors houses that I can "see". I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
Any advice would be appreciated.

Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal? I understand it involves switching the "channels" but don't know how to do it right now. Currently, everything works, so I don't want to mess it up tinkering. Another caveat- there are several other wireless networks from neighbors houses that I can "see". I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
Any advice would be appreciated.
OK.. sounds like a mess.. or at least messy and the previous people should have left a log book with all the IP address info in it.. you have far too many routers.. but from here it is impossible to tell how they are configured. Most are probably just setup as AP.
Naming rule for wireless.. Same SSID same security different channel.
SSID ie wireless name to work on the PC side should have no spaces and no special characters. TC name should also follow that rule. So the devices need to all set with fixed channels.
Don't worry too much about iStumbler and what is outside your house.. there isn't enough channels at 2.4ghz anyway. And you are going to need to use them all. There are only three non-overlapping channels. 1, 6, 11 so set each device to one of those channels. The TC should be as close as you can to where you normally use the MacBooks.. and turn on the 5ghz. You will have to leave it to automatic name so the Macbook can also roam across from 2.4 to 5ghz. But if you care to use a different name and force it onto 5ghz the speed is much better as long as you are in the same room.
Roaming is great in theory.. often in practice it just doesn't work.. you need to step in and turn off wireless and then turn it back on.. you can quickly see which router it is connecting to by hold down the option key when you click the airport fan in the top menu area.. and look at bssid.. you will have to figure out which number MAC address relates to which router.
Also do not be surprised if Lion gives you issues. It seems to often drop out and lose connection to the TC as a backup device even if internet is still working.

Need help in gettin the SessionValues in another page in new Responsibility

Hi All,
While trying to get the session value from one page to another page in OAF I am not able to get it.
Whereas the pages comes from 2 different Responsibilities.
When user clicks on Click Here link of the first page it will take the user to another page which is mapped to another responsibility
The following will be the code which I tried.
First Page CO :
package ncr.oracle.apps.fnd.wf.worklist.webui;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
public class ExNtfDetailsFnCO extends oracle.apps.fnd.wf.worklist.webui.NtfDetailsFnCO
public ExNtfDetailsFnCO()
public void processRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processRequest(oapagecontext, oawebbean);
oracle.apps.fnd.framework.OAApplicationModule oaapplicationmodule = oapagecontext.getApplicationModule(oawebbean);
String NtfId=oapagecontext.getParameter("NtfId");
if (NtfId !=null)
oapagecontext.putSessionValue("NtfId", NtfId);
//throw new OAException("NtfId PR If is : " +NtfId,OAException.CONFIRMATION);
Second Page CO:
public class Ex1PsrSearchCO extends oracle.apps.ap.payments.psr.webui.PsrSearchCO
public Ex1PsrSearchCO()
public void processRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processRequest(oapagecontext, oawebbean);
oracle.apps.fnd.framework.OAApplicationModule oaapplicationmodule = oapagecontext.getApplicationModule(oawebbean);
String NtfId = (String)oapagecontext.getSessionValueDirect("NtfId");
// String NtfId = (String)oapagecontext.getSessionValue("NtfId");
if (NtfId !=null)
throw new OAException("LINK name is : " +NtfId,OAException.CONFIRMATION);
else
throw new OAException("NtfId name is : " +NtfId,OAException.CONFIRMATION);
Actual requirement is when user comes to the second page, It needs to fetch all the data basing on the Built - Payment batch : US160212AUPUSDCHK258091 from the page one
Regards,
Mahendra

Hi All,
While trying to get the session value from one page to another page in OAF I am not able to get it.
Whereas the pages comes from 2 different Responsibilities.
When user clicks on Click Here link of the first page it will take the user to another page which is mapped to another responsibility
The following will be the code which I tried.
First Page CO :
package ncr.oracle.apps.fnd.wf.worklist.webui;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
public class ExNtfDetailsFnCO extends oracle.apps.fnd.wf.worklist.webui.NtfDetailsFnCO
public ExNtfDetailsFnCO()
public void processRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processRequest(oapagecontext, oawebbean);
oracle.apps.fnd.framework.OAApplicationModule oaapplicationmodule = oapagecontext.getApplicationModule(oawebbean);
String NtfId=oapagecontext.getParameter("NtfId");
if (NtfId !=null)
oapagecontext.putSessionValue("NtfId", NtfId);
//throw new OAException("NtfId PR If is : " +NtfId,OAException.CONFIRMATION);
Second Page CO:
public class Ex1PsrSearchCO extends oracle.apps.ap.payments.psr.webui.PsrSearchCO
public Ex1PsrSearchCO()
public void processRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processRequest(oapagecontext, oawebbean);
oracle.apps.fnd.framework.OAApplicationModule oaapplicationmodule = oapagecontext.getApplicationModule(oawebbean);
String NtfId = (String)oapagecontext.getSessionValueDirect("NtfId");
// String NtfId = (String)oapagecontext.getSessionValue("NtfId");
if (NtfId !=null)
throw new OAException("LINK name is : " +NtfId,OAException.CONFIRMATION);
else
throw new OAException("NtfId name is : " +NtfId,OAException.CONFIRMATION);
Actual requirement is when user comes to the second page, It needs to fetch all the data basing on the Built - Payment batch : US160212AUPUSDCHK258091 from the page one
Regards,
Mahendra

Need help with image upload and preview display

hi guys,
I'm trying to upload image and then display it as a preview, but when upload form submits to the same page image placeholder does not refreshes it's source and displays the same image as before.
Image 4.jpg already exists.
I upload it with nameConflict = "overwrite"
upload form points to the same page, therefore page reloads
In IE image placeholder does not display the new image, but shows the old one until I refresh the page with F5 and resend information, however if checked, image in the file is already different.
In Firefox, sometimes it works and image refreshes, sometimes not.
any help would be greatly appreciated!
cheers,
Simon

Hi Daverms,
With your code you suggest to not only upload the image but make a database entry too. However my intention is to firstly upload the file, and show a preview. Then if user is satisfied with what he sees, he presses "aprove" button and therefore makes a datase entry. Then the photo number will increase by one.
Until user is not aproving the photo he can upload any image again and again, but the new image will be always given the same name (example 4.jpg) and overwriting the old one.
I believe the problem persists because browsers are loading image with the same name from the cache, and not from the actual location. Therefore when I refresh the page it catches the correct image.
If I follow your code, every time I upload the image, name of it is different, therefore browser cannot find it in the cache and is forced to load one from the server.
I wonder is there any way to avoid this cache problem?
cheers,
Simon

Need help, Trouble in uploading records using sql loader in Forms 6i

Hi,
I am trying to develop a screen for uploading records to a table by using a ctl file, batch file and sql loader.
Env: Forms 6i, Oracle 8
Table to be updated is: shy_upload_table
My TSN entry looks similar to this,
TEST_AXA.CNB.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 11.23.11.123)(PORT = 1234))
(CONNECT_DATA =
(SID = axdabc)
My intention is whenever i press the upload_button, I should truncate the table and upload it with the contents of the file.
In the when-button-pressed event of the upload_button I have the following code. always I am able to truncate the table but am not able to upload it with the contents of the file. Can any of you help me fix this problem ?
declare
     var_control varchar2(256);
     VAR_DATA VARCHAR2(256);
     VAR_OUTPUT VARCHAR2(500);
     var_filename varchar2(256);
     str varchar2(50);
     cnt number;
begin
     FORMS_DDL('TRUNCATE TABLE shy_upload_table ');
     select count(*) into cnt from shy_upload_table;
     message('count '||cnt);
     MESSAGE('');
If NOT form_success Then
     MESSAGE('Upload Failed');
     MESSAGE('Upload Failed');
else
     set_item_property('DISPLAY_PB',enabled,property_true);
--when ever i run, i am able to see the display_pb enabled. it means form_success is true.
end if;
     var_filename := :txt_filename;
--I have tried with each of the below option,
--sqlldr userid/[email protected] control=F:\ERP\file_upload.ctl
--sqlldr userid/password@axdabc control=F:\ERP\file_upload.ctl
--sqlldr userid/password@TEST_AXA.CNB.COM control=F:\ERP\file_upload.ctl
     VAR_DATA :='data=' || var_filename ;
     VAR_OUTPUT := var_control|| ' ' ||VAR_DATA;
     host('F:\a.bat');
end;
batch file contents...
# I have tried with each of the below options
sqlldr userid/[email protected] control=F:\ERP\file_upload.ctl data=F:\ERP\sample.txt log=F:\ERP\x.log bad=F:\ERP\x.bad
#sqlldr userid/password@axdabc control=F:\ERP\file_upload.ctl data=F:\ERP\sample.txt log=F:\ERP\x.log bad=F:\ERP\x.bad
#sqlldr userid/password@TEST_AXA.CNB.COM control=F:\ERP\file_upload.ctl data=F:\ERP\sample.txt log=F:\ERP\x.log bad=F:\ERP\x.bad
pause
Thanks
vish

Hi Francois,
Thanks for responding, I am not very sure of what you want me to try out.
When I double click the batch file containing the below, the record gets inserted in the table. Only when using my form and trying to upload, it fails to insert the record.
batch file contents...
#sqlldr userid/password@TEST_AXA.CNB.COM control=F:\ERP\file_upload.ctl data=F:\ERP\sample.txt log=F:\ERP\x.log bad=F:\ERP\x.bad
pause
Thanks
Vish

Need help for file upload - reposted for Steve Muench

Hi Steve,
I have been involved developing a web application that requires a file upload operation. I have studied your example on Upload Text File and Image Example in the Not Yet Documented ADF Sample Applications section. I got the file upload part worked but could not get the original file name to populate the name field..i.e. if I upload myFile.txt to the database, the name field will be myFile.txt (not the name enter by user). Is there a way to capture the filename info? or is it possible to do so within ADF framework? I am using ADF/Struts/JSP with ORDDoc data type. Thanks very much.
Bill

Hello Nani,
You need to change any settings in 'FILE' transaction. This transaction is used to set up Logical file paths. ( In general it will be set already for your system).
You can use the following code.
DATA: LC_LOGICAL_FILENAME_EXPSRC LIKE RCGIEDIAL-IEFILE
                                                VALUE 'EHS_IMP_SOURCES'.
DATA:      L_EMERGENCY_FLAG            TYPE C.
DATA:      L_FILE_FORMAT               LIKE FILENAME-FILEFORMAT.
data : X_RCGIEDIAL LIKE RCGIEDIAL occurs 0 with HEADER LINE.
read the default pathname on application server
    CALL FUNCTION 'FILE_GET_NAME'
         EXPORTING
            CLIENT                  = SY-MANDT
              LOGICAL_FILENAME        = LC_LOGICAL_FILENAME_EXPSRC
              OPERATING_SYSTEM        = SY-OPSYS
            parameter_1             = ' '
            PARAMETER_2             = ' '
            USE_PRESENTATION_SERVER = ' '
            WITH_FILE_EXTENSION     = ' '
            USE_BUFFER              = ' '
         IMPORTING
              EMERGENCY_FLAG          = L_EMERGENCY_FLAG
              FILE_FORMAT             = L_FILE_FORMAT
              FILE_NAME               = X_RCGIEDIAL-IEFILE
         EXCEPTIONS
              FILE_NOT_FOUND          = 1
              OTHERS                  = 2.
    write :/ 'file format', L_FILE_FORMAT,
           / 'file name', X_RCGIEDIAL-IEFILE.
Thanks,
Jyothi

Need help with video uploading to itunes & ipod

hi,
i'm new to ipod video. i have 1 music video which i just converted from wmv format > mpeg-4 format. when i dragged the mpeg-4 format to itunes, nothing happened. am i doing this incorrectly? how is the uploading work exactly? i read some of the previous posts but i'm still clueless.
plz give me step by step instruction. thx in advance.

dude. some time itunes just doesnt support drag and drop techniques . just try the simple copy and paste(ctrl(c+v)). if that file is gonna be played on the ipod u get a small tab box in the itunes that the file which u r copying is being processed .
even if this technique doesnt work , then thats a faulty format . u can try another video converter . say videora or Aplus video converter . u will find them in www.download.com

Need Help on cffile upload, destination to another server

Similar Messages

Maybe you are looking for