Need help on Enterprise Structure
Hi,
I need to map the following business structure in SAP. The business is run on Strategic Business Unit (SBU) concept. There are 3 SBUs: Steel, Paper and Chemicals. Each SBU has its own manufacturing plant. There are 2 distribution channels. There are 4 Regional Offices (Sales), and each regional office has 4 Branch Offices (Sales) under it. Each region has one warehouse for storing products and another warehouse for storing spares. Can I support this entire structure with only one sales organization? If yes, please tell me how I can do it. Or do I need to create 4 sales organizations (one for each region)?
Any helpful links or documentation is greatly appreciated.
My email id is: [email protected]
Thanks in advance.
1 Sales Organization
2 Distribution Channel
4 Division (Each SBU & spares (<i>if spares belong to specific SBU, then 3 Division</i>) as Division) or 1 Division (SBU can be identified through other fields like Customer Group on sales Tab in sales area data. <b>Advantage</b>: This will reduce configuration & master data volume)
4 Plants (3 SBU's & 1 Warehouse)
Storage location as per requirement
4 Sales Office (4 Regional Offices (Sales))
16 Sales Group (each regional office has 4 Branch Offices (Sales))
4 shipping points (1 may suffice if Plants are in same location)
Try to keep Organization Structure as simple as possible, so as to avoid huge configuration & master data.
Regards,
Rajesh Banka
Reward points if helpful.
Similar Messages
-
I need help with event structure.
I am trying to feed the index of the array, the index number can vary from 0 to 7.
Based on the logic ouput of a comparison, the index buffer should increment
or decrement every time the output of comparsion changes(event change). I guess I need to use event structure?
(My event code doesn't execute when there is an event at its input /comparator changes its boolean state.
Anyone coded on similar lines? Any ideas appreciated.
Thanks in advance!You don't need an Event Structure, a simple State Machine would be more appropriate.
There are many examples of State Machines within this forum.
RayR -
Need help with case structures- please help :)
Hey all.
I'm currently trying to program a infrared furnace. I'm setting a temperature, subtracted my set temperature from the actual temperature (thermocouple hooked up to SCB-68), and voltage is being sent to the controller of the furnace accordingly. However, I need to hold the set temperature for a certain amount of time. I need help programming this: when the VI reads the set temperature from the thermocouple, it results in a timer running down. When the timer runs down to 0, the While Loop ends. I'm thinking case structures is most appropriate, but if you have a better suggestion, please let me know.
ThanksYou should probably implement a state machine.
The state machine would keep track of the temperature and making ajustments on a timely basis.
There is a template of a state machine is you select under the File menu > New > From Template.
You can also look under Help > Find Example > and do a search for state machine.
There are lots of state machine examples on this forum, some of which may be quite useful.
RayR -
Hello, I would like to create an extention that will help to
manage a
glossary.
First I need to decide on the structure of the xml document
that will
contain all glossary entries. Since I don't have much
experience with XML in
extention content, I was wondering if there are certain
recommendations I
should follow.
What is preferable: using attributes that will holt the
content or rather
having xml-elements. What is easy to parce?
I would greatly appreciate any tips, help and suggestions.
Olyalyu.oO(olga)
>First I need to decide on the structure of the xml
document that will
>contain all glossary entries. Since I don't have much
experience with XML in
>extention content, I was wondering if there are certain
recommendations I
>should follow.
I would start as simple as possible, for example with
something like
this:
<glossary>
<entry>
<term>...</term>
<explanation>...</explanation>
</entry>
<entry>
<term>...</term>
<explanation>...</explanation>
</entry>
</glossary>
Of course it also depends on what you want to do with this
structure and
if you need additional informations.
>What is preferable: using attributes that will holt the
content or rather
>having xml-elements. What is easy to parce?
There's no real rule-of-thumb whether to use elements or
attributes.
If unsure, use elements.
Micha -
Need help in Data Structure in Java
Design a FSA which accepts all strings over {a,b} which end in b, and in which every b (except for the last one) is immediately followed by two or more a's.
Convert the following into a deterministic finite state automaton, using the subset construction algorithm.
a,b
\/ a b a
--> 0 --> 1 --> 2 ---> 3
State 3 is accepting.
Describe (in English) the language which the regular expression (a|ba)* denotes.
Using the techniques discussed in class, convert the regular expression in the previous problem to an FSA with epsilon transitions.
Now convert the FSA from the previous problem to an equivalent FSA without epsilon transitions.
I have to solve this problem .. can anyone help me out here?I have to solve this problem .. can anyone help me out
here?Your code didn't show up in the post. Please re-post with code
describing where you are having the problem. -
Need help with Data Structures!
I'm finally in Java 2nd year! I'm working on a problem- have been working for hours but cant seem to get the hang for it. Basically after determining that an integer is odd, and not more than 10- we are supposed to print it this way
1
333
55555
7777777
999999999 This is what I've done so far!
public class Numbers {
public static int print (int x) {
String [] L = new String [x.length];
if (x <= 1) {
return x;
else if (x >= 10 || x% 2 != 1)
System.out.println("Number is greater than 10");
else
for (int i = 0; i < L.length; i ++) {
System.out.println(x);
return print (x -2);
now when I run this program my output is
9
9
9
9
9
9
9
9
7
7
7
7
7
7
7
and so on untill
1.
I cant figure out which approach to take next. Tips please!it doesnt matter, I made it unrecursive, Ill just fix ur code up here:
public class Numbers
public static int print (int x)
if (x <= 1)
return x;
else if (x >= 10)
System.out.println("Number is greater than 10");
else if ( x% 2 != 1)
System.out.println("Number is even");
else
int p = print(x-2);
for (int i = 0; i < x; i ++)
System.out.print(x);
System.out.println();
return p;
} -
Need help to redesign legacy SQL Script
Hello Experts,
I have the below code which produces a CREATE TRIGGER statement. as of now this does for updating. I need to re-design this code to add for inserting and deleting as well. I just need help in the structuring wise. I can build the logic for inserting and updating inside. I want to know how i can continue to get for "inserting" and "deleting" as well.
you will understand my question better if you go through main code, present output and required output format below.
I know this is a bad design first of all. but the below code is a legacy one. so i cant change the entire structure of the code :-( all i can do is to continue designing it to add new changes. Hence sought help from you all.
please help
SQL CODE:
WITH audit_tables
AS
(SELECT object_name,
MIN (column_id) min_col,
MAX (column_id) max_col
FROM user_objects o,
user_tab_columns c
WHERE o.object_name = 'CHR_VAL_DESC_A_T'
AND o.object_name = c.table_name
GROUP BY object_name
SELECT txt
FROM (
SELECT ' CREATE OR REPLACE TRIGGER ' || REPLACE(object_name,'_A_T') || '_ADT_TRG' || CHR(13) ||
' AFTER INSERT ' || CHR(13) ||
' OR UPDATE ' || CHR(13) ||
' OR DELETE ' || CHR(13) ||
' ON ' || REPLACE(object_name,'_A_T','_T') || CHR(13) ||
' FOR EACH ROW ' || CHR(13) ||
' DECLARE ' || CHR(13) ||
' BEGIN ' || CHR(13) ||
' IF updating THEN ' || CHR(13) ||
' INSERT INTO ' || object_name || CHR(13) ||
' (' txt, object_name, 1 disp_order, 0 column_id
FROM audit_tables
UNION ALL
SELECT txt, object_name, disp_order, column_id
FROM (SELECT
CASE
WHEN max_col = column_id THEN
' '||column_name
ELSE
' '||column_name || ','
END AS txt, object_name, 2 disp_order, column_id
FROM audit_tables t,
user_tab_columns C
WHERE c.table_name = t.object_name
ORDER BY c.column_id ASC)
UNION ALL
SELECT ' )' || CHR(13) ||
' VALUES ' || CHR(13) ||
' (', object_name, 3 disp_order, 0
FROM audit_tables t
UNION ALL
SELECT txt, object_name, disp_order, column_id
FROM (SELECT
CASE
WHEN max_col = column_id THEN
CASE
WHEN SUBSTR(column_name,1,2) = 'N_' THEN
' :NEW.'||decode(substr(column_name,1,2),'N_',substr(column_name,3))||');'
WHEN SUBSTR(column_name,1,2) = 'O_' THEN
' :OLD.'||decode(substr(column_name,1,2),'O_',substr(column_name,3))||');'
WHEN min_col = column_id THEN
' 1'
WHEN column_id = 2 THEN
' ''I'''
WHEN column_id = 3 THEN
' SYSDATE'
ELSE
' :NEW.'||column_name||');'
END
ELSE
CASE
WHEN SUBSTR(column_name,1,2) = 'N_' THEN
' :NEW.'||decode(substr(column_name,1,2),'N_',substr(column_name,3))||','
WHEN SUBSTR(column_name,1,2) = 'O_' THEN
' :OLD.'||decode(substr(column_name,1,2),'O_',substr(column_name,3))||','
WHEN min_col = column_id THEN
' 1'||','
WHEN column_id = 2 THEN
' ''I'''||','
WHEN column_id = 3 THEN
' SYSDATE' ||','
ELSE
' :NEW.'||column_name||','
END
END AS txt,object_name, 4 disp_order, column_id
FROM audit_tables t,
user_tab_columns c
WHERE c.table_name = t.object_name
ORDER BY c.column_id ASC)
UNION ALL
SELECT 'END '||REPLACE(object_name,'_A_T') || '_ADT_TRG;' || CHR(13),
object_name, 5 disp_order, 0
FROM audit_tables)
ORDER BY object_name, disp_order, column_id
PRESENT OUTPUT:
CREATE OR REPLACE TRIGGER CHR_VAL_DESC_ADT_TRG
AFTER INSERT
OR UPDATE
OR DELETE
ON CHR_VAL_DESC_T
FOR EACH ROW
DECLARE
BEGIN
IF updating THEN
INSERT INTO CHR_VAL_DESC_A_T
TXN_ID,
TXN_TYP,
ADT_DTTM,
CHR_VAL_DESC_ID,
CHR_VAL_ID,
LANG_ID,
DESC_ID,
O_CHR_VAL_DESC,
N_CHR_VAL_DESC,
O_TRANS_STATE,
N_TRANS_STATE,
CRTD_BY,
CRTD_DTTM,
O_UPD_BY,
N_UPD_BY,
O_UPD_DTTM,
N_UPD_DTTM,
O_LOCK_NUM,
N_LOCK_NUM
VALUES
1,
'I',
SYSDATE,
:NEW.CHR_VAL_DESC_ID,
:NEW.CHR_VAL_ID,
:NEW.LANG_ID,
:NEW.DESC_ID,
:OLD.CHR_VAL_DESC,
:NEW.CHR_VAL_DESC,
:OLD.TRANS_STATE,
:NEW.TRANS_STATE,
:NEW.CRTD_BY,
:NEW.CRTD_DTTM,
:OLD.UPD_BY,
:NEW.UPD_BY,
:OLD.UPD_DTTM,
:NEW.UPD_DTTM,
:OLD.LOCK_NUM,
:NEW.LOCK_NUM);
END CHR_VAL_DESC_ADT_TRG;
REQUIRED OUTPUT FORMAT:
CREATE OR REPLACE TRIGGER TRIGGER_NAME
AFTER INSERT
OR UPDATE
OR DELETE
ON TABLE_NAME
FOR EACH ROW
DECLARE
BEGIN
IF updating THEN
INSERT TABLE_NAME
list of column names
VALUES
IF inserting THEN
INSERT TABLE_NAME
list of column names
VALUES
IF deleting THEN
INSERT TABLE_NAME
list of column names
VALUES
END TRIGGER_NAME;can anyone please help?
i tried adding with inserting and updating also..but when i tried to add deleting part the final output not comes in proper structure.
WITH audit_tables
AS
(SELECT object_name,
MIN (column_id) min_col,
MAX (column_id) max_col
FROM user_objects o,
user_tab_columns c
WHERE o.object_name IN ('CHR_VAL_DESC_A_T', 'CHR_VAL_A_T')
AND o.object_name = c.table_name
GROUP BY object_name
SELECT txt
FROM (
SELECT ' CREATE OR REPLACE TRIGGER ' || REPLACE(object_name,'_A_T') || '_ADT_TRG' || CHR(13) ||
' AFTER INSERT ' || CHR(13) ||
' OR UPDATE ' || CHR(13) ||
' OR DELETE ' || CHR(13) ||
' ON ' || REPLACE(object_name,'_A_T','_T') || CHR(13) ||
' FOR EACH ROW ' || CHR(13) ||
' DECLARE ' || CHR(13) ||
' BEGIN ' || CHR(13) ||
*' IF inserting THEN '* || CHR(13) ||
' INSERT INTO ' || object_name || CHR(13) ||
' (' txt, object_name, 1 disp_order, 0 column_id
FROM audit_tables
UNION ALL
SELECT txt, object_name, disp_order, column_id
FROM (SELECT
CASE
WHEN max_col = column_id THEN
' '||column_name
ELSE
' '||column_name || ','
END AS txt, object_name, 2 disp_order, column_id
FROM audit_tables t,
user_tab_columns C
WHERE c.table_name = t.object_name
ORDER BY c.column_id ASC)
UNION ALL
SELECT ' )' || CHR(13) ||
' VALUES ' || CHR(13) ||
' (', object_name, 3 disp_order, 0
FROM audit_tables t
UNION ALL
SELECT txt, object_name, disp_order, column_id
FROM (SELECT
CASE
WHEN max_col = column_id THEN
CASE
WHEN SUBSTR(column_name,1,2) = 'N_' THEN
' :NEW.'||decode(substr(column_name,1,2),'N_',substr(column_name,3))||');'
WHEN SUBSTR(column_name,1,2) = 'O_' THEN
' NULL'||');'
WHEN min_col = column_id THEN
' 1'
WHEN column_id = 2 THEN
' ''I'''
WHEN column_id = 3 THEN
' SYSDATE'
ELSE
' :NEW.'||column_name||');'
END
ELSE
CASE
WHEN SUBSTR(column_name,1,2) = 'N_' THEN
' :NEW.'||decode(substr(column_name,1,2),'N_',substr(column_name,3))||','
WHEN SUBSTR(column_name,1,2) = 'O_' THEN
' NULL'||','
WHEN min_col = column_id THEN
' 1'||','
WHEN column_id = 2 THEN
' ''I'''||','
WHEN column_id = 3 THEN
' SYSDATE' ||','
ELSE
' :NEW.'||column_name||','
END
END AS txt,object_name, 4 disp_order, column_id
FROM audit_tables t,
user_tab_columns c
WHERE c.table_name = t.object_name
ORDER BY c.column_id ASC)
UNION ALL
SELECT txt, object_name, disp_order, column_id
FROM(SELECT *' ELSIF updating THEN '* || CHR(13) ||
' INSERT INTO ' || object_name || CHR(13) ||
' (' txt, object_name, 5 disp_order, 0 column_id
FROM audit_tables
UNION ALL
SELECT txt, object_name, disp_order, column_id
FROM (SELECT
CASE
WHEN max_col = column_id THEN
' '||column_name
ELSE
' '||column_name || ','
END AS txt, object_name, 6 disp_order, column_id
FROM audit_tables t,
user_tab_columns C
WHERE c.table_name = t.object_name
ORDER BY c.column_id ASC)
UNION ALL
SELECT ' )' || CHR(13) ||
' VALUES ' || CHR(13) ||
' (', object_name, 7 disp_order, 0
FROM audit_tables t
UNION ALL
SELECT txt, object_name, disp_order, column_id
FROM (SELECT
CASE
WHEN max_col = column_id THEN
CASE
WHEN SUBSTR(column_name,1,2) = 'N_' THEN
' :NEW.'||decode(substr(column_name,1,2),'N_',substr(column_name,3))||');'
WHEN SUBSTR(column_name,1,2) = 'O_' THEN
' :OLD.'||decode(substr(column_name,1,2),'O_',substr(column_name,3))||');'
WHEN min_col = column_id THEN
' 1'
WHEN column_id = 2 THEN
' ''U'''
WHEN column_id = 3 THEN
' SYSDATE'
ELSE
' :NEW.'||column_name||');'
END
ELSE
CASE
WHEN SUBSTR(column_name,1,2) = 'N_' THEN
' :NEW.'||decode(substr(column_name,1,2),'N_',substr(column_name,3))||','
WHEN SUBSTR(column_name,1,2) = 'O_' THEN
' :OLD.'||decode(substr(column_name,1,2),'O_',substr(column_name,3))||','
WHEN min_col = column_id THEN
' 1'||','
WHEN column_id = 2 THEN
' ''U'''||','
WHEN column_id = 3 THEN
' SYSDATE' ||','
ELSE
' :NEW.'||column_name||','
END
END AS txt,object_name, 8 disp_order, column_id
FROM audit_tables t,
user_tab_columns c
WHERE c.table_name = t.object_name
ORDER BY c.column_id ASC)
UNION ALL
SELECT 'END IF;' || CHR(13) ||
'END '||REPLACE(object_name,'_A_T') || '_ADT_TRG;' || CHR(13),
object_name, 9 disp_order, 0
FROM audit_tables)
ORDER BY object_name, disp_order, column_id) -
I need help making a square that scans across a screen.
i'm trying to make a program that creates images of a square scanning across a black background. so far all i have is a program that makes one image where i can alter the size of the square and its position. I'm very very new to labview and i need help with the structure that would create all the images of the square scanning across and then shift down and scan across again.
thank you very much,
Joseph Sadler
Attachments:
Drawexample.vi 24 KBAs Lynn found, there is a memory problem with the vi which didn't show up in my limited testing.
Using Shift Registers with Picture Controls can cause problems.
See this thread.
Try the attached "mod" version.
Then I got to thinking, why redraw the box (2x with "erase") - when you could just move a box around?
(Note: I used a picture for the box, but you could use other objects.)
The "mod1" version does it this way.
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help.
Attachments:
squarescan mod.vi 20 KB
squarescan mod 1.vi 20 KB -
I need help moving my Photoshop 7 from my old laptop to my new laptop which is running Windows 7 Enterprise. I’ve tried two routes unsuccessfully. I install the CD, it does not autoplay. I execute Autoplay.exe at the root directory, I am welcomed, I choose English, I accept the EULA, I get the Install/Explore choices window, with the Install button already selected, I click the Photoshop button, the CD spins, and nothing happens. In the 2nd attempt I execute Setup.exe in the Photoshop directory, and nothing happens at all. I’m never even offered the opportunity to enter my product code. What should I do?
There could is likely a compatibility problem between the old software and the newer operating system.
-
Need help abt bluetooth services on windows 8 enterprise
glad to join hp forums and thats help me too much persoanlly also at work
got problem in bluetooth services nd iam using windows 8 enterprise all bluetooth services was working well on windows 7 professional but i upgraded ma os nd now just i can send and recive files via bluetooth , cant play music directly too , i got screen shot thats will explain more :
thats what i need i got this screen shot from help its full services i got just one option its file transfer
and this is what i got right now
need help i like win 8 more than 7 so i wont back to use win 7With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Newbie needs help with Flex app
Hi there. I am very new to Flex and also fairly new to
programming although I do have a little experience.
I am trying to create an app which stores code snippets or
common text I tend to use every day in my documents and emails.
So basically I need help on a design level. I can refer to
the developer's manual for exact instructions for commands, but I
need to know what to code first.
The app will consist of:
-a tree directory structure where I can create groups.
-There will be a basic text editor where I input all my data,
basic text formatting options (font, bullets etc) would be a bonus.
-A search function
-Finally it will ideally allow multiple client apps write to
a central database file over a network
Can anyone suggest how I should approach such a project?
Or are there any tutorials / source files which demonstrate
each bullet point?
thanks.Hey jono,
I'm new too. But I think I might know the right components.
If you google any of these + flex 3 you should get some
decent documentation
tree - advanced dataGrid component
basic text editor - rich text editor component
search function - well, you're gonna need to read up on
arrays, and arraycollection. Once you get that stuff working, you
can write up a function to search for a string in an array.
network functionality - HTTPService, you can dump the
datagrid into a database, and have it load the database when you
open up the application.
Give these things a shot, tutorials / sources will come with
the google searches. -
Need help in using FM BAPI_MATERIAL_SAVEDATA
Gurus,
I need help in using the FM BAPI_MATERIAL_SAVEDATA. The FM is returning a message that says "The field MARA-MEINS/BAPI_MARA-BASE_UOM(_ISO) is defined as a required field; it does not contain an entry".
I have supplied the necessary details and yet the FM won't push through.
If possible, please post sample codes.
Below is my sample code:
===============================================
REPORT zmm_materialupload.
eject
$$******************************************************************************
$$ TYPES
$$******************************************************************************
eject
$$******************************************************************************
$$ INTERNAL TABLES (custom structure
$$******************************************************************************
eject
$$******************************************************************************
$$ RANGES
$$******************************************************************************
eject
$$******************************************************************************
$$ FIELD-SYMBOLS
$$******************************************************************************
eject
$$******************************************************************************
$$ PARAMETERS & SELECT-OPTIONS
$$******************************************************************************
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE text-001.
*SELECT-OPTIONS: s_matnr FOR mara-matnr.
SELECT-OPTIONS: s_mtart FOR mara-mtart.
SELECT-OPTIONS: s_mbrsh FOR mara-mbrsh DEFAULT 'P'.
SELECT-OPTIONS: s_werks FOR marc-werks DEFAULT '1000' OBLIGATORY.
SELECT-OPTIONS: s_lgort FOR marc-lgpro DEFAULT 'OPSL' OBLIGATORY.
PARAMETERS: p_path LIKE rlgrap-filename DEFAULT 'C:\Documents and Settings\training_11\Desktop\Book4 (2ITEMS).txt' OBLIGATORY.
SELECTION-SCREEN END OF BLOCK 1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
field_name = 'P_FNAME'
IMPORTING
file_name = p_path.
eject
$$******************************************************************************
$$ START-OF-SELECTION
$$******************************************************************************
START-OF-SELECTION.
PERFORM check_input.
PERFORM get_file.
PERFORM filter_input.
PERFORM populate_tabs.
PERFORM bapi_mat.
eject
$$******************************************************************************
$$ FORMS
$$******************************************************************************
FORM bapi_mat.
LOOP AT it_tab INTO wa_tab.
CALL FUNCTION 'BAPI_MATERIAL_GETINTNUMBER'
EXPORTING
material_type = wa_tab-mtart
industry_sector = wa_tab-mbrsh
required_numbers = 1
TABLES
material_number = it_matnr.
ENDLOOP.
LOOP AT it_matnr INTO wa_matnr.
READ TABLE it_tab INTO wa_tab INDEX sy-tabix.
wa_tab-matnr = wa_matnr-material.
MODIFY it_tab FROM wa_tab INDEX sy-tabix.
ENDLOOP.
PERFORM populate_tabs.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = it_headdata
clientdata = it_clientdata
clientdatax = it_clientdatax
plantdata = it_plantdata
plantdatax = it_plantdatax
FORECASTPARAMETERS =
FORECASTPARAMETERSX =
PLANNINGDATA =
PLANNINGDATAX =
STORAGELOCATIONDATA =
STORAGELOCATIONDATAX =
valuationdata = it_valuationdata
valuationdatax = it_valuationdatax
WAREHOUSENUMBERDATA =
WAREHOUSENUMBERDATAX =
SALESDATA =
SALESDATAX =
STORAGETYPEDATA =
STORAGETYPEDATAX =
flag_online = ' '
flag_cad_call = ' '
NO_DEQUEUE = ' '
NO_ROLLBACK_WORK = ' '
IMPORTING
return = it_return
TABLES
materialdescription = it_materialdescription
unitsofmeasure = it_unitsofmeasure
unitsofmeasurex = it_unitsofmeasurex
internationalartnos = it_internationalartnos
materiallongtext = it_materiallongtext
taxclassifications = it_taxclassifications
returnmessages = it_returnmessages
PRTDATA =
PRTDATAX =
EXTENSIONIN =
EXTENSIONINX =
IF sy-subrc = 0.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'
IMPORTING
return = it_return.
ENDFORM. "bapi_mat
*& Form GET_FILE
text
FORM get_file.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
text = 'Getting data from file...'.
MOVE: p_path TO gv_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = gv_file
filetype = 'ASC'
has_field_separator = 'X'
read_by_line = 'X'
TABLES
data_tab = it_tab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. "GET_FILE
*& Form check_input
text
FORM check_input.
Material Type
IF s_mtart-low IS INITIAL AND s_mtart-high IS INITIAL.
s_mtart = 'IEQ'.
s_mtart-low = 'ABF'. "Waste
s_mtart-high = 'ZTRD'. "Stock Items
APPEND s_mtart.
ENDIF.
IF s_mtart-low IS NOT INITIAL AND s_mtart-high IS INITIAL.
MOVE: s_mtart-low TO s_mtart-high.
ENDIF.
Industry Sector
IF s_mbrsh-low IS INITIAL AND s_mbrsh-high IS INITIAL.
s_mbrsh = 'IEQ'.
SELECT mbrsh
FROM mara
INTO TABLE it_mbrsh.
s_mbrsh-low = wa_mbrsh-mbrsh.
LOOP AT it_mbrsh INTO wa_mbrsh.
s_mbrsh-high = wa_mbrsh-mbrsh.
ENDLOOP.
APPEND s_mbrsh.
ENDIF.
IF s_mbrsh-low IS NOT INITIAL AND s_mbrsh-high IS INITIAL.
MOVE: s_mbrsh-low TO s_mbrsh-high.
ENDIF.
Plant
IF s_werks-low IS INITIAL AND s_werks-high IS INITIAL.
s_werks = 'IEQ'.
s_werks-low = '1000'.
s_werks-high = '2000'.
ENDIF.
IF s_werks-low IS NOT INITIAL AND s_werks-high IS INITIAL.
MOVE: s_werks-low TO s_werks-high.
ENDIF.
Storage Location
IF s_lgort-low IS NOT INITIAL AND s_lgort-high IS INITIAL.
MOVE: s_lgort-low TO s_lgort-high.
ENDIF.
ENDFORM. "check_input
*& Form Filter_input
text
FORM filter_input.
SORT it_tab BY matnr mtart mbrsh werks lgort.
LOOP AT it_tab INTO wa_tab.
IF wa_tab-mtart NOT IN s_mtart.
DELETE it_tab WHERE mtart NOT IN s_mtart.
ENDIF.
IF wa_tab-mbrsh NOT IN s_mbrsh.
DELETE it_tab WHERE mbrsh NOT IN s_mbrsh.
ENDIF.
IF wa_tab-werks NOT IN s_werks.
DELETE it_tab WHERE werks NOT IN s_werks.
ENDIF.
IF wa_tab-lgort NOT IN s_lgort.
DELETE it_tab WHERE lgort NOT IN s_lgort.
ENDIF.
ENDLOOP.
ENDFORM. "Filter_input
*& Form populate_tabs
text
FORM populate_tabs.
LOOP AT it_tab INTO wa_tab.
MOVE: wa_tab-matnr TO wa_headdata-material,
wa_tab-mbrsh TO wa_headdata-ind_sector,
wa_tab-mtart TO wa_headdata-matl_type,
'X' TO wa_headdata-basic_view,
'X' TO wa_headdata-sales_view,
'X' TO wa_headdata-purchase_view,
'X' TO wa_headdata-mrp_view,
'X' TO wa_headdata-account_view.
wa_tab-matkl TO wa_clientdata-matl_group,
wa_tab-meins TO wa_clientdata-base_uom,
wa_tab-groes TO wa_clientdata-size_dim,
wa_tab-gewei TO wa_clientdata-unit_of_wt,
wa_tab-ntgew TO wa_clientdata-net_weight,
'X' TO wa_clientdatax-matl_group,
'X' TO wa_clientdatax-base_uom,
'X' TO wa_clientdata-size_dim,
'X' TO wa_clientdatax-unit_of_wt,
'X' TO wa_clientdatax-net_weight,
wa_tab-werks TO wa_plantdata-plant,
wa_tab-ekgrp TO wa_plantdata-pur_group,
wa_tab-prctr TO wa_plantdata-profit_ctr,
wa_tab-werks TO wa_plantdatax-plant,
'X' TO wa_plantdatax-pur_group,
'X' TO wa_plantdatax-profit_ctr,
wa_tab-werks TO wa_valuationdata-val_area,
wa_tab-bklas TO wa_valuationdata-val_class,
wa_tab-peinh TO wa_valuationdata-price_unit,
wa_tab-verpr TO wa_valuationdata-moving_pr,
wa_tab-stprs TO wa_valuationdata-std_price,
wa_tab-xlifo TO wa_valuationdata-lifo_fifo,
wa_tab-werks TO wa_valuationdatax-val_area,
'X' TO wa_valuationdatax-val_class,
'X' TO wa_valuationdatax-price_unit,
'X' TO wa_valuationdatax-moving_pr,
'X' TO wa_valuationdatax-std_price,
'X' TO wa_valuationdatax-lifo_fifo.
APPEND wa_headdata TO it_headdata.
APPEND wa_clientdata TO it_clientdata.
APPEND wa_plantdata TO it_plantdata.
APPEND wa_valuationdata TO it_valuationdata.
MODIFY it_tab FROM wa_tab TRANSPORTING matnr.
ENDLOOP.
ENDFORM. "populate_tabs
$$******************************************************************************Hai.
check the below example.
REPORT z34332_bdc_create_material .
data: la_headdata type BAPIMATHEAD,
la_clientdata type BAPI_MARA,
la_CLIENTDATAX type BAPI_MARAX,
la_return type BAPIRET2.
data: i_materialdescription type table of BAPI_MAKT,
wa_materialdescription like line of i_materialdescription.
la_headdata-MATERIAL = '000000000000000004'.
la_headdata-IND_SECTOR = 'M'.
la_headdata-MATL_TYPE = 'FERT'.
la_clientdata-BASE_UOM = 'FT3'.
la_CLIENTDATAX-BASE_UOM = 'X'.
la_clientdata-MATL_GROUP = '01'.
la_CLIENTDATAX-MATL_GROUP = 'X'.
wa_materialdescription = 'TEST'.
append wa_materialdescription to i_materialdescription.
clear: wa_materialdescription.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = la_headdata
CLIENTDATA = la_clientdata
CLIENTDATAX = la_CLIENTDATAX
PLANTDATA =
PLANTDATAX =
FORECASTPARAMETERS =
FORECASTPARAMETERSX =
PLANNINGDATA =
PLANNINGDATAX =
STORAGELOCATIONDATA =
STORAGELOCATIONDATAX =
VALUATIONDATA =
VALUATIONDATAX =
WAREHOUSENUMBERDATA =
WAREHOUSENUMBERDATAX =
SALESDATA =
SALESDATAX =
STORAGETYPEDATA =
STORAGETYPEDATAX =
FLAG_ONLINE = ' '
FLAG_CAD_CALL = ' '
IMPORTING
RETURN = la_return
TABLES
MATERIALDESCRIPTION = i_materialdescription
UNITSOFMEASURE =
UNITSOFMEASUREX =
INTERNATIONALARTNOS =
MATERIALLONGTEXT =
TAXCLASSIFICATIONS =
RETURNMESSAGES =
PRTDATA =
PRTDATAX =
EXTENSIONIN =
EXTENSIONINX =
write: la_return-TYPE, ',', la_return-MESSAGE.
clear: la_headdata, la_return, la_clientdata, la_clientdatax.
regards.
sowjanya.b. -
Concurrent crystal license timeout Issue, need help.
Hi,
My company is using crystal enterprise 10 with 18 concurrent user license.
However, we often hit out of crystal license issues.
Does time to wait for exporting crystal reports to excel/pdf takes up licenses?
Does time to wait for crystal report to be printed or viewed on the web browser takes up licenses?
We all know that user sessions take up user licenses. 1 user login take up 1 license.
Does crystal pruning job takes up user licenses too?
Need help urgently, much appreciated.Hi Daren,
Support on Cystal Enterprise 10 has expired. Make sure that your users are actually logging off and not just closing their browser.
One user can take up multiple licenses by not logging off or opening multiple browsers to view multiple reports. Scheduled jobs that are running do not take up license, but a user veiwing a historical instance does take up a license.
In your metrics tab in the Cyrsatl Management Console -> Servers-> cms you should be able to see the active number of sessions- system connections are backend connections between the servers and these do not take up any licenses.
Best Regards,
Jadie -
I need help with a VB Application
I need help with building an application and I am on a tight deadline. Below I have included the specifics for what I need the application to do as well as the code that I have completed so far. I am having trouble getting the data input into
the text fields to save to a .txt file. Also, I need validation to ensure that the values entered into the text fields coincide with the field type. I am new to VB so please be gentle. Any help would be appreciated. Thanx
•I need to use the OpenFileDialog and SaveFileDialog in my application.
•Also, I need to use a structure.
1. The application needs to prompt the user to enter the file name on Form_Load.
2. Also, the app needs to use the AppendText method to write the Employee Data to the text file. My project should allow me to write multiple Employee Data to the same text file. The data should be written to the text file in the following format (comma
delimited)
FirstName, MiddleName, LastName, EmployeeNumber, Department, Telephone, Extension, Email
3. The Department dropdown menu DropDownStyle property should be set so that the user cannot enter inputs that are not in the menu.
Public Class Form1
Dim filename As String
Dim oFile As System.IO.File
Dim oWrite As System.IO.StreamWriter
Dim openFileDialog1 As New OpenFileDialog()
Dim fileLocation As String
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
openFileDialog1.InitialDirectory = "c:\"
openFileDialog1.Filter = "Text files (*.txt)|*.txt|All files (*.*)|*.*"
openFileDialog1.FilterIndex = 1
openFileDialog1.RestoreDirectory = True
If openFileDialog1.ShowDialog() = System.Windows.Forms.DialogResult.OK Then
fileLocation = openFileDialog1.FileName
End If
'filename = InputBox("Enter output file name")
'oWrite = oFile.CreateText(filename)
cobDepartment.Items.Add("Accounting")
cobDepartment.Items.Add("Administration")
cobDepartment.Items.Add("Marketing")
cobDepartment.Items.Add("MIS")
cobDepartment.Items.Add("Sales")
End Sub
Private Sub btnSave_Click(ByValsender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click
'oWrite.WriteLine("Write e file")
oWrite.WriteLine("{0,10}{1,10}{2,10}{3,10}{4,10}{5,10}{6,10}{7,10}", txtFirstname.Text, txtMiddlename.Text, txtLastname.Text, txtEmployee.Text, cobDepartment.SelectedText, txtTelephone.Text, txtExtension.Text, txtEmail.Text)
oWrite.WriteLine()
End Sub
Private Sub btnExit_Click(ByValsender As System.Object, ByVal e As System.EventArgs) Handles btnExit.Click
oWrite.Close()
End
End Sub
Private Sub btnClear_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnClear.Click
txtFirstname.Text = ""
txtMiddlename.Text = ""
txtLastname.Text = ""
txtEmployee.Text = ""
txtTelephone.Text = ""
txtExtension.Text = ""
txtEmail.Text = ""
cobDepartment.SelectedText = ""
End Sub
End ClassHi Mikey81,
Your issue is about VB programming, so Visual Basic forum is a better forum for your case. I moved this thread there,
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hello, I need help with my macbook pro.
It looks like I cannot install anything anymore. Everytime I try to install a new software, I simply get stuck during the installation type process. I put in my password, it does accept it, but it does not go any further.
I tried to reset the password, put no password, repair the permissions, the disk but nothing will do. I nearly got stuck with the log in screen but finally succeeded in disabling it.
So I thought I might try to create a new account but I cannot click the lock to make changes. It simply refuses to react.
I am now thinking about using the migration assistant to save all my settings, data and so fourth, but again I get stuck when I have to type in my password. It accepts it but nothing happens...
I guess it has something to do with the authorization process, but can't find anything on the internet about it... Can you help me out?
I am running Lion 10.7.3.
Regards,
Nicolas.
(I apologize if any grammatical/structural mistakes were to be found, english is not my mother-tongue. )You probably won't like this suggestion, but I suggest you reinstall Lion.
First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS.
Maybe you are looking for
-
Error when discovering Oracle EBS from Enterprise Manager 12C
Hi everyone.. I have installed Enterprise manager 12C and discovered EBS database.But im unable to discover EBS applications through it. OEM VERSION : 12C R2 EBIS VERSION : VISION INSTANCE 12.1.3 DATABASE : 11.2.0.3 I'm getting below error when im tr
-
Help: Using EJB in Creator-2
The NetBeans 5.5 tutorial is out of sync with the IDE. However, with the IDE I created a simple sessionbean with one business method that returns a hardcoded value of type String. This was housed in a EJBModule called EJBModule1. I added this to Crea
-
Upgrade iPod touch from 3.1.3 to 4.2
Hey everyone! Sorry this is my first post here, and I'm not super computer savvy, so pardon me if I'm a little slow at figuring this out. I'd like to update my ipod touch to the newest software, however, reading around the forums I heard it deletes t
-
Select multiple boxes at time of Outbound Delivery processing with scanner
Hi all, I am facing a problem at time of processing outbound delivery. I am bound to select 1 box and its corresponding HU. This reduces productivity of end users. I want to know if there is any possibility to select multiple boxes at one go using a
-
Displaying XML data in dynamic text box
I'm attempting to display external XML data in a dynamic text box. When I test preview my code, the information that I want to display shows up in the Output window, so I know that its linked and works. My trouble is creating the code that will link