Need help on OSB problem , need to transform and route

Hi,
I am new to OSB and i have a problem where i need to route service call to 7 different services based on one of the value of parameter of input request. After routing i need to transform the input parameter into stirct datatype output and of different structure. Need suggestion how to do it. I have read some tutorial about proxy services. i have WSDL of both input and output.
Regards

You can call 7 different services. AlSB supports one route node, but provides you with the facility of Service Callout.
You can try Service Callout. To use Service Callout select Add An Action >> Communication >> Service callout.
You can also try Routing Options if you don't have any Proxy Service or Business Service to call.
Hope this helps!

Similar Messages

Need help with daq problem

Hi,
I need to generate a clock with a period of 20 micro seconds, duty cycle of
approx 20% and a data line as well as an address line all linked to the clock
pulse.
I have tried many different solutions, all using the Daq PCI-1200 but nothing
seems to work correctly. Usually the system bombs and I have to do a manual
reset to over come the problem.
Any suggestions?
Ken

Hallo, Ken,
Du meintest am 20.02.00 zum Thema Need help with daq problem:
> I need to generate a clock with a period of 20 micro seconds, duty
> cycle of approx 20% and a data line as well as an address line all
> linked to the clock pulse.
You'll need an external clock, expecially under Windows.
Windows ticks with appr. 18 Hz, and the CPU tick isn't always available
when Windows tasks multi.
Viele Gruesse!
Helmut

When trying to install Aid Virtual Instruments I get a warning no mountable file systems. I need help fixing the problem.

When trying to install Pro Tools 10.3.3 Aid Virtual Instruments I get a warning no mountable file systems. I need help fixing the problem.

Thanks Linc for responding to my post. I searched a little further and found I was missing a file. Once I downloaded the fix, I was able to install the software from the original download.

Need help with getResource() problem under weblogic 6.1

Hey all,
          I've got a serious problem that I can't figure out. This should be really
          simple - but it's alluding me. I have an ear file with a number of servlets
          inside it. This ear file also contains a resource that my servlets want to
          read from. This resource is located (within the ear file) at:
          "/content/structure/a.txt". The file contains raw ascii.
          To have my serlvet read from this file, I thought it would be as simple as:
          URL content =
          servlet.getServletContext().getResource("/content/structure/a.txt");
          // pw is an instance of PrintWriter
          pw.print(content.getContent());
          However, when I execute the above I get the following exception:
          java.lang.NullPointerException
          at
          java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
          at java.net.URLConnection.getContentHandler(URLConnection.java:979)
          at java.net.URLConnection.getContent(URLConnection.java:581)
          OK, so fine - I figure that I'm new to this. The documentation for the URL
          class tells me there is another way around this. It says that rather then
          calling getContent() directly, I can open a stream on the URL and read from
          that, like so:
          URL content =
          servlet.getServletContext().getResource("/content/structure/scenario2resourc
          es.txt");
          FileInputStream fis = content.openStream();
          but when I do this I get the following different exception:
          java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
          at Utility.writeFileToOutput(Utility.java:134)^M
          Apparently this thing is trying to return a web-logic-specific stream (which
          is incompatible with an FileInputStream) - which I don't want to use or
          learn about since I want my stuff to work under other webservers.
          Can anyone tell me what I'm doing wrong? This should be simple.
          -john
          John Hilgedick
          WisdomTools, Inc.
          [email protected]


Wenjin,
          I appreciate your response. I tried treating it as a normal InputStream -
          but it didn't make any difference. Here's what I did:
          URL content =
          servlet.getServletContext().getResource("/content/structure/scenario2resourc
          es.txt");
          InputStream is = (InputStream)content.getContent();
          And here's the exception:
          java.lang.NullPointerException^M
          at
          java.net.URLConnection.stripOffParameters(URLConnection.java:1011)^M
          at
          java.net.URLConnection.getContentHandler(URLConnection.java:979)^M
          at java.net.URLConnection.getContent(URLConnection.java:554)^M
          at java.net.URL.getContent(URL.java:807)^M
          at Utility.writeFileToOutput(Utility.java:134)^M
          You can see that it is definitely breaking somewhere in getContent().
          If you have any other ideas, I'd appreciate hearing about them.
          -john
          ----- Original Message -----
          From: "Wenjin Zhang" <[email protected]>
          Newsgroups: weblogic.developer.interest.servlet
          Sent: Wednesday, November 20, 2002 5:03 PM
          Subject: Re: Need help with getResource() problem under weblogic 6.1
          >
          > The "/" in getServletContext().getResource("/content/structure/a.txt")
          means the
          > web (WAR) application root, not your EAR root.
          >
          > The ClassCastException is because that content.openStream() is not
          FileInputStream
          > and has nothing to do with Weblogic. You should treat it as normal
          InputStream.
          >
          >
          > "John Hilgedick" <[email protected]> wrote:
          > >Hey all,
          > >
          > >I've got a serious problem that I can't figure out. This should be
          really
          > >simple - but it's alluding me. I have an ear file with a number of
          servlets
          > >inside it. This ear file also contains a resource that my servlets want
          > >to
          > >read from. This resource is located (within the ear file) at:
          > >"/content/structure/a.txt". The file contains raw ascii.
          > >
          > >To have my serlvet read from this file, I thought it would be as simple
          > >as:
          > >
          > >URL content =
          > >servlet.getServletContext().getResource("/content/structure/a.txt");
          > >// pw is an instance of PrintWriter
          > >pw.print(content.getContent());
          > >
          > >However, when I execute the above I get the following exception:
          > >
          > >java.lang.NullPointerException
          > > at
          > >java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
          > > at
          java.net.URLConnection.getContentHandler(URLConnection.java:979)
          > > at java.net.URLConnection.getContent(URLConnection.java:581)
          > >
          > >OK, so fine - I figure that I'm new to this. The documentation for the
          > >URL
          > >class tells me there is another way around this. It says that rather
          > >then
          > >calling getContent() directly, I can open a stream on the URL and read
          > >from
          > >that, like so:
          > >
          > >URL content =
          >
          >servlet.getServletContext().getResource("/content/structure/scenario2resour
          c
          > >es.txt");
          > >FileInputStream fis = content.openStream();
          > >
          > >but when I do this I get the following different exception:
          > >
          > >java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
          > > at Utility.writeFileToOutput(Utility.java:134)^M
          > >
          > >Apparently this thing is trying to return a web-logic-specific stream
          > >(which
          > >is incompatible with an FileInputStream) - which I don't want to use
          > >or
          > >learn about since I want my stuff to work under other webservers.
          > >
          > >Can anyone tell me what I'm doing wrong? This should be simple.
          > >
          > >-john
          > >
          > >
          > >--
          > >John Hilgedick
          > >WisdomTools, Inc.
          > >[email protected]
          > >
          > >
          >

I need help! Do I need to have a MacBook/Mac Pro to submit/distribute an app game in Apple Store? I hired a designer and developer to do it for me..should be done next week.I have an Ipad.Is Ipad going to be just fine?I know I have to sign up for the Deve

Hi,
I need help! Do I need to have a MacBook/Mac Pro to submit/distribute an app game in Apple Store? I hired a designer and developer to do it for me..should be done next week.I have an Ipad.Is Ipad going to be just fine?I know I have to sign up for the Developer Program(I started that..though not finished yet)My developer will walk me thru submitting it.Please help.
Thanks,
sheapps28

You'll need a Mac with a support OS X and tools to complete the process.

I need help, i am having a brain fart and i can' think. Dice rolling Game

here is what i am supposed to do:
write an app to simulate the rolling to 2 Player (Player and Computer)
Show each rolling in Map size 50 channel
Just like this: Player play frist
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
[0] ... Press any key to rolling
You got : 6
Your position : 6
1 2 3 4 5 [P] 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
[0] ... Computer is rolling
Computer got :2
Computer position: 2
1 [C] 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
[0]... Press any key to rolling
You got: 6
Your position : 12
1 [C] 3 4 5 6 7 8 9 10
11 [P] 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
[0].... Computer is rolling
Rolling until someone got 50
Show Game over
That is about it. I need help, i am having a brain fart and i can' think. it is done in java in console, no graphics or nuthin.
thanks

That is about it. I need help, i am having a brain
fart and i can' think. it is done in java in console,
no graphics or nuthin.So to fill in your question:
"Please someone do my homework for me ? "
Or do you have an actual question ?

Need help re-synching iPods with new computer and getting iTunes to...

Need help re-synching iPods with new computer and getting iTunes to recognize our iPods (it doesn't even recognize them when they're plugged in).
Hubby wiped my harddrive for me, so now I need to get everything back in proper places. I'm using windows XP and installed iTunes once again (I believe it's version 8). I also installed all of my iTunes songs. Now I need to know where to go from here. We have 3 iPods and I need to get them all synched once again. I know how to create different libraries for each of us, but I can't figure out how to get our songs back into our iTunes libraries. When I open iTunes and plug in an iPod, iTunes doesn't even show that an iPod is plugged in.
What do I do now to get each of our iPods synched with our own libraries?
TIA
Brandy

Thanks Zevoneer. The "Restart ipod service" worked and itunes is now recognizing my ipod! Hooray!
Okay, now how do I synch all of our ipods with our individual libraries (I don't want all of my kids' songs and vice versa)? We each have hundreds of songs on our ipods that we don't want to lose.
Thanks again!

Re: Beginner needs help using a array of class objects, and quick

Dear Cynthiaw,
I just read your Beginner needs help using a array of class objects, and quick of Dec 7, 2006 9:25 PM . I really like your nice example.
I also want to put a question on the forum and display the source code of my classe in a pretty way as you did : with colors, indentation, ... But how ? In html, I assume. How did you generate the html code of your three classes ? By help of your IDE ? NetBeans ? References ?
I already posted my question with six source code classes ... in text mode --> Awful : See "Polymorphism did you say ?"
Is there a way to discard and replace a post (with html source code) in the Sun forum ?
Thanks for your help.
Chavada

chavada wrote:
Dear Cynthiaw,
I just read your Beginner needs help using a array of class objects, and quick of Dec 7, 2006 9:25 PM . I really like your nice example.You think she's still around almost a year later?
I also want to put a question on the forum and display the source code of my classe in a pretty way as you did : with colors, indentation, ... But how ?Just use [code] and [/code] around it, or use the CODE button
[code]
public class Foo() {
* This is the bar method
public void bar() {
// do stuff
}[/code]

I need help restoring the ability to view Youtube and all videos of my 4 year old MacBook after receiviving a meaage the the Adobe ineeds to be updated? Thanks.ng

I need help restoring the ability to view Youtube and all videos of my 4 year old MacBook after receiving a message the the Adobe ineeds to be updated? Thanks.

Did you upgrade whatever product from Adobe was out of date yet?

I need help! I have the iphone 5 and I want to buy the whastsaap, but it turns out I get to put the answers up and answer the questions but I do not remember. Someone could help me? Help! Thank you!

I need help! I have the iphone 5 and I want to buy the whastsaap, but it turns out I get to put the answers up and answer the questions but I do not remember. Someone could help me? Help! Thank you!

Security questions:
https://discussions.apple.com/thread/4533485?tstart=0

Hello need help I download a game from 4shared and it an iPhone game . It show up and my iTunes but I can't sync it to my phone I need help

Hello need help I download a game from 4shared and it an iPhone game . It show up and my iTunes but I can't sync it to my phone I need help

Wowowowow I was told I can get any app from the net and it will work thank

I try signing into iMessage and it takes about 45-50 seconds to do. When that happens it tells me there is a network problem. I am positive I don't have a network problem and I need help on this problem please??

I try to sign in and it just takes forever to do I try and try and do it over and over and it brings me the same results. Created a new Apple ID and when I did it still tells me there is a network problem. But the thing is I am still able to use the Internet I need help?? And it does the exact same thing for FaceTime so I don't know what to do??

Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799

Need Help with Scrolling Problem

I have a JTree displayed in scrollpane. Based on search criterial I select the nodes where the search criteria is found. If the match is located off the screen further down into the tree, the node is highlighted but the scrollpane doesn't automatically scroll down to show it. Any help with this problem is appreciated.

Wow.. Thanks. I thought I would need some fancy code to handle this problem. scrollPathToVisible did it for me. Thanks.

Need help bad, screen problem

heres my problem. i setup arch on my desktop last night (64bit), i installed my nvidia drivers. i have a 21" crt sun monitor, not sure the model number. but i brought it to a friends this morning to update and install kdemod since they have highspeed. now i was hooked up to their monitor, they have a cheap 15" crt. so it worked fine there, now when i got it home, i get a black screen when it boots up on my monitor, i can get to a console however
i deleted a couple lines in the monitor section in the xorg.conf............so now i get 640x480 res, but i cant use anything higher
been searching around, and i found some stuff about running Xorg -configure, but i get something about a tmp file being locked..........and i dont know how to delete anything here from the console
i need help here
Last edited by ssl6 (2007-09-16 07:00:40)

nvm, i just deleted the xorg.conf and rebooted, its fine now
edit// nvm, its not using my nvidia driver.........i might still need help, im trying something right now, not sure what im doing though
ok, i tried to run nvidia-xconfig, and when i rebooted, im back to square one with my monitor flashin an invalid scan frequency
well, i deleted the xorg.conf again and got it booted up. but i generated a new one with nvidia-xconfig again, heres what i puts out, i just need to remember not to reboot any time soon. im using a 7900gs, the newest nvidia 100 series drive from the repo, and arch 64bit on this system by the way
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder26) Wed Jun 13 16:54:14 PDT 2007
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
here's that part of the xorg.conf from my other computer running 32bit arch with a geforce 3 connected to the same monitor via kvm switch. this machine is using a 96xx driver though
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "sun"
HorizSync 31.5 - 82.0
VertRefresh 50.0 - 90.0
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
#VideoRam 65536
# Insert Clocks lines here if appropriate
Identifier "geforce"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "geforce"
Monitor "sun"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
any ideas here?
Last edited by ssl6 (2007-09-16 07:53:48)

I need help with simple problems. im a student.

i'd like to be advanced with my studies so i will post questions.. i need help on how to answer. thank you.
1. create a java program that will evaluate if the value entered is a positive, negative, vowel, consonant and special characters.
im actually done with the positive and negative using if else statements.. i used an integer data type. now my question is how do conjoin the characters when i need to evaluate a vowel and a consonant. i cant use char either. please help. i dont know what to do yet.
2. create java program that will translate the input from numbers to words. e.g. input:123 output: one hundred twenty-three.
i have an idea to use a switch case statement. but i have no idea on how will i be able to do it. so if you guys can help me.. well then thankies..

Welcome to the Sun forums. First, please note that you have posted in the wrong forum. This forum is for topics related to Sun's JavaHelp product. You should post your questions in the New to Java forum.
As part of your learning, you will have to develop the ability to select an approach to a problem, create a design that reflects that approach, and then implement the design with code that you create.
So, it's inappropriate for us to take the problem statement that you have been given and short-circuit your learning process by giving you the implemented problem solution. We can comment on the individual questions that you may have, and point out problems and errors that we see in the code that you develop.
As a hint, when you are stuck, forget about Java and programming. Just start with a sheet of paper and a pencil, and figure out how to layout the task on paper. The consider how to translate that to programming.
If you have problems, post short example code that shows the problem, and explain your question clearly. We can't read minds.
Make sure you post code correctly so that it's not mangled by the forum software, and so that formatting is maintained. Select your typed or pasted code block and press the CODE button above the typing area.

Need help on OSB problem , need to transform and route

Similar Messages

Maybe you are looking for