Need help pc settings

Under change pc settings on the corner and edges turned on clear list of recent apps. I am trying to turn it back on bur cannot figure out how to do it. I am pretty much new to this and at 70 years of age tech challenge. Any would
be greatly appreciated.

Hi,
You can follow the screenshot below to clear APP list. I not sure whether I understand your means correctly, If so, please feel free let us know.
Roger Lu
TechNet Community Support

Similar Messages

Need help to Settings Apple iMAC 2012 and HP LaserJet 1100.

Need help to Settings Apple iMAC 2012 and HP LaserJet 1100.
I purchased a imac, 2012, before there was Windows 7. I have the HP LaserJet 1100 and Print Servers Trendnet TE100 P21, with Windows 7 it worked, but with MAC OSX 10.8 does not want to, do not go printing. Could help with the setting?
Нужна помощь в настроке Apple iMAC 2012 и HP LaserJet 1100.
Я купил imac 2012, до этого был Windows 7. У меня есть принтер HP LaserJet 1100 и принтсервер Trendnet TE100 P21, с Windows 7 все работало, но с MAC OSX 10.8 работать не хочет, не идет печать. Могли бы помочь с настройкой?

привет Roman,
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.
Mac OS X: О сброса системы Печать ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 инструкции ...
В System Preferences> Печать и факс, правой кнопкой мыши или Control + Click на боковой панели списка принтеров, выберите Сброс системы печати.
если вы держите опцию и нажмите кнопку "-" на вкладке он сбрасывает систему печати.
http://www.macosxhints.com/article.php?story=20031215144430486
Безопасная загрузка с HD, (Удержание нажатой клавиши Shift нажатой при загрузке), запустите Disk Utility в Приложения> Утилиты, затем выделите диск, нажмите на ремонт разрешения.
Любые устройства, которые ранее появились в списке принтеров и факсов список необходимо будет добавить снова после перезагрузки системы печати.
Сброс системы печати в Mac OS X 10.5.x + + +
1. Для сброса системы печати в Mac OS X 10.5.x, выполните следующие действия:
2. Выберите Системные настройки в меню Apple.
3. Выбери для печати и факса в меню Вид.
4. Управление кнопкой мыши на список принтеров в левой части окна, затем выберите "Сброс системы печати" из контекстного меню. Если вы не видите списка принтеров, управление кнопкой мыши на текст "Нажмите, чтобы добавить + принтер или факс" и выберите "Сброс системы печати ..." В качестве альтернативы, если у Вас уже есть один или несколько принтеров в списке, можно Option-нажмите кнопку "-" (Удалить принтер) кнопки.
http://support.apple.com/kb/ht1341
Перезагрузку.

Need help with settings for my broadband.

when I first started with BT, I set up some time limits for my broadband usage so that my teenage children were not using the internet late at night but I now would like to change the times and I cannot find out how to do this?
Please can anyone help.
Currently my internet goes off at 11pm at night and on at 7am.

You can edit or delete the settings you already set.
Settings are under BT access Control in the hub manager.
Click on Apply to save any changes you make.
http://bt.custhelp.com/app/answers/detail/a_id/11364/c/346,1887,1891

Need help with settings for Xbox360

Real quick, I need to know how to set the router for 2 xbox360's with open nat...I have looked all over and have done the MTU and UPnP tricks but want to do port triggering but am not sure how to set applications or static IP...if needed. Thanks for all the help.

A known issue with Linksys routers is the NAT Type 3 or anything related to dropping of Internet connectivity during play time. Network Address Translation (NAT) is the ability of a router or firewall to translate a public IP address to a private IP address and vice versa. It adds security to the network by keeping the private IP addresses hidden from the outside world.
Here is the link for setting up the Xbox 360: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=082ee344b4754044b1ff95fcd78b5305_4576.xml&pid=80&r...

Need help with settings....

My podcast was pulled for some reason from iTunes and they have told me to resubmit it but before I do I have to do this:
Change the title and link fields of your RSS feed to something other than what they are now.
Please can someone tell me what that means please, my feed is:
http://feeds2.feedburner.com/TheRadioTronPodcast

Presumably you submitted a feed file to Feedburner? - if so you should be able to amend that; also it would be much better to submit the file directly to iTunes rather than getting Feedburner to do it.
The feed itself has no line returns; although this does not affect its validity it makes it almost impossible to read. FeedValidator says the feed is valid but throws up some minor errors; in particular the 'description' tag should not contain HTML (the links). I also noticed that though the mp3 file appears to be correctly referenced the duration is given as zero. However the feed can be subscribed to in iTunes using the 'Advanced' menu.
In order to make the changes iTunes suggested you will need either to edit the feed file directlily or use whatever program you used to create it to make the changes. This page shows you a basic feed file and may help you to understand the process:
http://www.wilmut.org.uk/pc

I need help changing settings (port forward?) after a physical server move

Hi! I have a 10.6 server that I use at home. All is well and good there. The Airport Extreme assigns IP addresses for the network. I have www.mydomain.com that runs on the server -- I use it for testing web apps, etc. I use DynDNS with their client app that send the Comcast dynamic IP address back to DynDNS to keep the server on the grid.
My friend has a 10.6 server. He has www.hisdomain.com as a home business. He also uses DynDNS in a similar way. His landlord just informed him that his apartment is going to be sold from underneath him and he has to move ASAP. It looks like he won't have a permanent place for a month or two, so I offered to let him keep his server at my place.
We both run websites on port 443 and port 80.
After attaching his server to my network, his domain name updates, but typing www.hisdomain.com into a browser lands me on www.mydomain.com. I guess that the problem is port forwarding... the router sends all 443 and 80 requests to my server.
How do I configure this so that services for hisdomain.com are forwarded to his server while services for mydomain.com are forwarded to my server?

Short answer: you can't, although there are a couple of ways to sort-of kluge it.
Long answer: When your router gets an incoming connection, the only thing it has to go on is the IP address and port number (the domain name is sent much later, after TCP session with the server is established). So unless you have multiple public IP addresses (and a router that can handle them), or want to put the sites on different ports...
Speaking of which, here's kluge #1: run his server on different ports (e.g. 81 and 444, or maybe 8080 and 8043) and set the router to forward them to his server. Problem: the user has to include the port number in the URL when they connect, or they'll get your server.
Partial solution (and kluge #2): add a virtual site on your server, with the hostname www.hisdomain.com, go to its Aliases section, and add a rule in the URL Aliases & Redirects section, with these settings:
Type: RedirectMatch
Pattern: (.*)$
Path: http://www.hisdomain.com:81$1
Then build an SSL version that redirects to https://www.hisdomain.com:444$1. Problem: when the client connects, they'll get your SSL certificate instead of his (again, it happens before the client sends the domain name it's trying to reach), and get a cert error. No fix for this.
Kluge #3: instead of making the virtual site redirect clients to his server, add a reverse proxy so your server'll transparently forward requests to his server, and proxy the replies. I haven't done this, but I think what you need to do is make a virtual site (as above), and under its Proxy tab (the one under the virtual site, not the one under the Settings section), check the Enable Reverse Proxy box, leave the Proxy Path as "/" and the Sticky Session Identifier field blank, and add a Balancer member with the Server URL "http://hisinternalipaddress" and a blank Route. Or something like that. Again, you could do the same for https as well, but you'll have the same certificate problem.

Adding two Airport Express to New Ariport Extreme - need help with settings

First, I have a brand new Airport Extreme (square N one) that is up and working just fine. The SSID is "Unstable Network". Under the Wireless tab...The Wireless mode is currently: "Create a Wireless Network". The "Allow this network to be Extended" box is not checked. Radio Mode is "Automatic". Radio Channel Selection is set to "Automatic". What do these need to be changed to?
2nd: I have an older Aiport Express that I used to use for itunes and a receiver. I want to add this to my Airport Extreme Network to extend the wireless network to the basement and stream itunes to my remote receiver. I can see this Airport Express using Airport Utility. The SSID of this Airport Express is "Unstable Network Extender". Under the wireless tab....Wireless mode is set to "Join a Wireless Network" The network it is assigned to is my Airport Extreme SSID "Unstable Network". It shows up as IP address 10.0.1.6. What should these setting be to both extend the network and allow itunes to stream?
3rd: I have a second Airport Express that I would like to plug in at a remote end of my house on the second floor to extend my network even further. It is currently hardwired and I can see it in Airport Utility. The SSID is "Unstable Network Extender 2". The setting are the same as the other Airport Express. It shows up as IP address 10.0.1.13. What should they be to extend the network.
Thank you in advance to anyone that can clearly spell out what my setting should be. I am non-technical for the most part, but was technical enough to set up my Airport Extreme but can't figure out how to extend everything.

Since you will have a mix (802.11g/802.11n) AirPorts, and that you want to "daisy" chain the two AirPort Express Base Stations (AX) to extend the wireless network, you will need to configure the three of them for a static Wireless Distribution System (WDS).
Here are the basic steps to do so:
(Note: To facilitate the WDS set up, place the base stations within near proximity of each other during the set up phase, and then relocate them to their desired locations when complete. In this case, I suggest that you temporarily connect both AXs to the 802.11n AirPort Extreme Base Station (AEBSn) by Ethernet. Also, jot down the AirPort IDs (MAC addresses) for each of the base stations to be used in the WDS. The AirPort ID and is printed on the label on the bottom/side of the base station.) Finally, I strongly suggest that you perform a "hard" reset on the AEBSn and "factory default" resets on the AXs to get them back to their original "out-of-the-box" configurations before you start.)
For reference in this setup:
o AEBSn = main base station
o AX#1 = relay base station
o AX#2 = remote base station
Main Base Station Setup - AEBSn
o On the Mac click the AirPort status menu in the menu bar and choose the wireless network created by AEBSn.
o Open AirPort Utility (located in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
o Select the AEBSn, and then, choose Manual Setup from the Base Station menu.
o Click Wireless in the toolbar, and then, choose “Participate in a WDS network” from the Wireless Mode pop-up menu. (Note: You may have to hold down the <Option> key before making this selection to get the WDS option.)
o Click WDS, and then, choose “WDS main” from the WDS Mode pop-up menu.
o Select the “Allow wireless clients” checkbox if you want client computer to connect to this base station.
o Click the Add "+" button and enter the AirPort ID of the relay base station - AX#1.
o Click Update to send the new settings to the base stations in the WDS.
Relay Base Station Setup - AX#1
o In the AirPort Utility select AX#1, and then, choose Manual Setup from the Base Station menu.
o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the AEBSn from the Channel pop-up menu.
o Click WDS and choose “WDS relay” from the WDS Mode pop-up menu.
o Enter the AirPort ID of the AEBSn in the Main AirPort ID field.
o Click the Add "+" button and enter the AirPort ID of AX#2.
o Click Update to transfer the new WDS settings to the relay and remote base stations.
Remote Base Station Setup - AX#2
o In the AirPort Utility select AX#2, and then, choose Manual Setup from the Base Station menu.
o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the AEBSn from the Channel pop-up menu.
o Click WDS and choose “WDS remote” from the pop-up menu.
o Enter the AirPort ID of the AEBSn in the WDS Main field.
o Click Update to transfer the settings to the base station.
(ref: Pages 42-46 of "Designing AirPort Networks.)

After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.

After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ

Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes

I just bought this iPhone 4S second hand and during incoming and outgoing calls I can't hear the other person talk unless it's on speaker or if I have headphones in. I don't know what to do I've turned up my volume and checked my settings!! Need help

I Just bought a second hand iPhone 4S I am having issues with the hearing during incoming and outgoing calls, I have turned the volume up and checked my settings but I still have trouble hearing the other person speak. It works if it's on speaker or if I have headphones plugged in. I need help desperately!!!!! Any suggestions on what to do???

Hey Itsanaasaunders,
Thanks for the question. I understand that you are experiencing issues hearing sound while on a call (receiver wise, not speakerphone). The following resource provides troubleshooting steps for this symptom:
If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
http://support.apple.com/en-us/HT203800
Clear the receiver
The iPhone receiver won't work properly if it's blocked or dirty. Here's where the receiver is:
Follow these steps, testing after each:
- Make sure nothing is blocking the receiver, such as a case or film.
If you have a new iPhone, remove the plastic film on the front and back of the device.
- Check the receiver opening to see if it's blocked or dirty. If necessary, clean the receiver opening with a clean, small, dry, soft-bristled brush.
- While you're on a call, turn on speakerphone. If you still can't hear, then your network or reception could be the issue. Try calling again later or from a different location.
Restart and update
1. Restart your iPhone and test again.
2. If there's still no sound or poor sound quality, update to the latest version of iOS.
Get more help
If you've tried these steps and there's still no sound or poor sound quality from your iPhone, contact Apple Support.
Thanks,
Matt M.

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465 SSL) and none of them work. Please help!

You will need to get the required info to create/access the account with an email client from your school.
Are you currently accessing the account with an email client on your computer - if you have a Mac with the Mail.app, or if you have a PC with Outlook Express, etc.? If so, you can get the required account settings there.

HT204291 I have downloaded the new Lion OS X but the AirPlay icon wont appear in my menu bar. The option of AirPlay mirroring is turned on in the Display settings. No issues Air playing through iTunes. Need help. Thanks

I have downloaded the new Lion OS X but the AirPlay icon wont appear in my menu bar. The option of AirPlay mirroring is turned on in the Display settings. No issues Air playing through iTunes. Need help. Thanks

AirPlay
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer).
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

HT1338 I want to download a software update. How do I do this? I went to settings and into general. The software update icon wasn't there! I need help please!

I want to download a software update. How do I do this? I went to settings into general and the icon wasn't there! I need help immediately please!

Welcome to Apple Support Communities
You will only find the Software Update option if you have got iOS 5 or newer, and you say you are using iOS 4, so first you need to use iTunes to update your iPad to the most recent version, which is iOS 7.1 > http://support.apple.com/kb/ht4623

I'm needing help restoring an iPod touch 5 back to factory settings because I purchased it used

I'm needing help in restoring an iPod touch 5th generation back to factory settings. Because I purchased it used from a family member who can not remember their password or sercuity question answers

They need to call AppleCare, ask to be transferred to the Account Security team.

I need help with export settings

Hi everyone,
I need help outputting an HD file for presenting a video to a client. I have tried exporting to HD .mov (H.264 codec) and PE keeps crashing (error compiling movie). From what I’ve read here, it’s due to the gargantuan file QT creates and HD space (even though I think I have enough HD available).
So, I need a recommendation from you on what kind of file to output which will allow me to present the movie to the client in HD. This file is solely for the presentation, I have already published for web (FLV) and YouTube (direct share from PE) and they both worked fine.
Here are my project specs:
Timeline:           4:26
Format:               1920 X 1080 HD
Timebase:          29.97 frames per second
OS:                        Windows XP SP3
Processor:          Intel Core 2 Duo @ 2.66GHz
RAM:                    4GB
Project Drive:   250GB disk with 152GB free space internal dedicated project drive (separate from OS)
Thanks in advance for your help,
Jose

Hi Steve, Neale,
I wanted to follow-up on this post. I came into the office today to run a few tests so I can make sure that I have the correct settings on my camera and PE project for the next time around. Here are few observations I was wondering if you can comment on:
My Sony camera cannot shoot HDV. The only format it supports is AVCHD, so I'm stuck converting.
I tried to convert the footage I have to HDV with the software I have (AVS Video Converter and Koyote Soft HD Converter) and neither of the two have an "HDV" conversion setting. I see AVI, MPEG, MOV and many different settings in each (AVI: Hd Video 1080p: H.264AVC, 29.97fps, 4200kbps, Audio MP3, 256 kbps or MPEG: HD Video 1080p - MPEG2, 15000 kbps, 1920X1080, 29.97fps, etc). What should I be looking for?
I searched for "best file format" in the forum and found various postings from both of you referring to converting to DV-AVI within PE; especially if you have AVCHD footage (which I have). So, I followed directions and converted a file for testing. Then, I created a new project using HDV 1080i 30 settings and imported the converted file. I still get a red line on the timeline. Any thoughts on what I'm doing wrong?
I also converted the MOV files (shot in HDV 60i with the pro camera) to DV-AVI. I also get a red line on the timeline...
The DV-AVI converted footage (both cases) doesn't appear to be HD. It looks jagged on the preview window. Is it HD?
The DV-AVI converted footage is almost double the file size as the MTS (AVCHAD) file (138mb vs. 60mb). Isn't that going to make PE run slower?
Thanks in advance for your help. I just wanna make sure I do my homework now so I set everything up correctly on the next project.
Jose
P.S. I almost forgot! Here's the link to the live video on YouTube: http://www.youtube.com/watch?v=fEkqPmefJV0
Message was edited by: josejb70 - Added YouTube link

Need help pc settings

Similar Messages

Maybe you are looking for