Need Help Please - New m515
Hello,
Man, I feel so stupid asking this, but I got my new m515 charged and was ready to do the initial setup, and I cannot - CANNOT get the stupid stylus to come out so I can use it. I have pushed up, pulled OUT. Nothing. It is there..I can see it. I have had tons of gadgets over 30 years, and this is stumping me (college graduate). I don't want to break something brand new just because I am overloooking something obvious. But I don't get it. I've had other PDA's even.
Any hints...serious ones please?
Thanks very much.
A frustrated,
Dennis
Post relates to: Palm m515
Hi, and welcome to the Palm Support Community.
If the stylus in your m515 is the correct one for that model, it should slide right out the top with the help of a little "hook" that sticks out slightly on the side of the unit.
But there are many different stylus designs for different Palm models, and it sounds like perhaps the wrong model stylus got shoved into the silo? Did you buy this second-hand?
I don't have an m515 any longer, but there should be a short slot on the side where you can see the top part of the stylus. Unless you can use something skinny and kind of pointy to try to push it up from the slot, you might have to take it apart.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android
Similar Messages
-
How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks
Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community -
Bought a new macbook and want to manually manage music onto my iphone 4s (as it is already full of music from old windows laptop) but when i click 'manually manage' and then 'apply' i get the message saying it will erase everything already on there. Need help please!
Before you sync your iPhone make sure that all the music that was synced to your phonereviously has been copied to your iTunes on the new MacBook Pro. Then when you connect your phone you will be able to either sync all music or select only those playlists that you want on the phone.
-
I can not play any games on the new ipad 32 G wifi after take over to oversea , need help please
After I turn off Airplane mode and I want to play games when was downloaded before fly to oversea. I was palying all games on ipad before fly.
now when I turn on ipad and want to paly games but It can not play games on ipad.???
Anyone can fit it on setting?
Need help please.
Thank you.OK. I am having a little bit of trouble understanding your responses, but let's start with this since you are having an issue with other apps as well.
Reboot your iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Let the iPad start up completely and then try again. -
Having issues with low memory that is causing some of my apps to crash, need help please !!!
Having issues with low memory that is causing some of my apps to crash, need help please !!!
Is the device actually showing low memory errors?
What is really occurring?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried? -
Hi!
My notebook had to be fixed and I´ve lost everything. I´ve downloaded iTunes and, of course, it´s empty. What happens if Isync my Ipod Nano? Will I loose all music that is in my Ipod? Need help, please! What should I do to keep my music? What should I do to transfer the music in the Ipod to itunes?
Thanks!!!How to use your iPod to move your music to a new computer
-
Iphone keeps shutting off by itself...need help please!!!
Just got new 3GS as my previous one broke....had the new one for about 2days and now it keeps shutting off when ever it wants...and the big apple just appears on the screen!! When i reset the phone it will load up for about 1minute then shut off again then the big apple appears again...Need help please!!!!
i tried to reset it while connected with the USB stick into laptop.....now after it went through the whole restore process it says that the SIM is not valid for the phone!!! please need help!!
-
My Ipad is disabled by wrong password and I have tried to reset and restore a few times with no success. Now I-tunes won't even recognize the I-pad in recovery mode. I need help please.
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed. Your systems has not been modified." I NEED HELP, PLEASE!
I got it figured out myself... yaaaaay for me!
-
After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ
Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes -
Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game.
Contact iTunes
Contact iTunes -
Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. When I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game.
Hello Vaidas Vaidas,
It sounds like you are noticing someone else is accessing your Clash of Clans data by playing the game and you have tried to reset your Apple ID password. If you are following the steps outlined in this article:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
What is preventing you from changing your password? Any error messages or prompts?
Thank you for using Apple Support Communities.
All the best,
Sterling -
i dont know how i got my photos to my ipod touch from my pc and now i wanna delete them but couldn't. so need help. please let me know.
To turn off auto sync - launch iTunes and go to Edit>Preferences>Devices - check the box at the bottom that says - Prevent iPod, iPhones and iPads from syncing automatically. Click OK and then quit iTunes.
Connect your iDevice to your PC.
Launch iTunes,
Click on the device name on the left side of the iTunes Window.
Click on the Photos Tab in the iTunes window on the right.
Untick all of the photos or albums that you want to remove.
Click on Apply in the lower right corner of iTunes
If you untick or uncheck the Sync Photos heading and then click Apply it will remove all of the photos from the device when it syncs. In this screenshot - I have only certain albums and events selected to sync. -
My iPhone 6 can't find my macbook pro on the airdrop list, although everything is in place, bluetooth, wi fi gets, need help please ?
Dear Niel, thank you but my mac is (MacBook Pro (Retina, 15-inch, Early 2013).
and i can send from it to my iPhone , but not vice versa -
After many months of non-use, when I tried to open Photoshop CS4 Extended, I got an error message 148.3. "Licensing for this product has stopped working." I need help, please.
Error "Licensing has stopped working" | Windows
Error "Licensing has stopped working" | Mac OS
Mylenium
Maybe you are looking for
-
Blank printout in report 6i from Application server oracle 9i
Hello, 3 days before our application server (oracle 9i for windows NT 1.0.2.0.0) hard disk crashed. We have installed AS. Now when user runs report from client pc and selects destination type as "cache" and submit query he can see the output. When he
-
Transport of ALE Interfaces for Function Module
hi, i have a Z function module, Z business object type and z message type identifying ALE interface. i need to move all the objects from Dev R3 to QA R3. What are the steps involved? Thanks, Tirumal
-
Update profile options at user level?
Hi All, Need a script for, update profile options at user level, for example we should be able to update a profile xyz for a user abc using that script? or please provide the document related to that..
-
Reinstalling iLife--iPhoto Shows "Skip
I'm trying to reinstall iLife '08, mostly because of my iPhoto having gone goofy. However, every time I run the installer from the CD, I can install everything but iPhoto. The choice is greyed, and it says "skip" next to it. I've checked the web and
-
i want the database object tab to appear with some modification like i dont want the find option and the create option. where is the portlet stored and how can it be modified? any ideas....