Need help - Real time Bill of Material Cost

Dear MM Experts,
I would like to know how to generate real time Bill of Material Costs for FG products. As per the limited knowledge I have, this can be done only by running CK40N Cost Estimates. Is there any way to get this information for all FG-Products through tables without running the Standard Cost Estimate?
Look forward to your feedback.
Mihir

Dear Jayaraman,
If you want to give multiple materials as the input,then you can use T code CK40N,and
execute the first 4 steps,and dont go for Marking & Release.
That's 1.selection (we select the product for which we want to do costing),
2.Structure Explosion.
3.Costing(the system sums up the materials cost and operation cost and the other Cost).
4.Analysis,Where here you will get the Standard Cost for multiple materials
and you can analyse the same.
Once if it's marked and released then Cost Rollup can't be carried out using CK40N or
CK11N,so you have to reorganise the cost estimate using CKR1.
Check & Revert back.
Regards
Mangalraj.S

Similar Messages

I need help with my bill

We have put together a few FAQs to help with some of the questions you might have about your BT bill.
Please click on the links below to find the answer you're looking for:
I don’t understand my bill – what do all these charges mean?
Help with my rental charges
__ (i) Where can I find a breakdown of my BT rental charges?
__ (ii) I recently changed my package and think I've been charged twice
I need help with my bill
Why is my bill higher than normal?
I thought the calls in my Calling Plan were free - why have I been charged?
Can I view my BT bill online at My BT?
What do I do if I want to change or cancel my BT package?
Check below for is a list of our archived billing posts:
How to get the most from your online account
Why go paper-free?
Live Chat - Connect to a billing advisor
Your Bill explained
How to get the most from your MyBT account and reasons to go paperfree
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Where can I find a breakdown of my BT rental charges?
The rental charges (sometimes called service charges) shown on your bill are for line rental, plus any additional services such as Calling Features. You're charged for these in advance.
You can view your current rental charges online when you sign up for My BT.
I recently changed my package and think I've been charged twice
When you change your telephone calling plan, calling feature, broadband or BT Vision package, you may get a bill that's confusing or looks like you've been charged twice.
Don't worry, you won't be charged twice. We charge in advance for our services, so you'll see charges for both your old and new services on the bill, even though your old service has been cancelled. You'll be refunded what you paid in advance for your old service on the same bill that shows the advance charges for your new service.
This can also happen when we rename or re-price our products and services. You should see that you've been refunded for the old product name and then charged the same price for the new product name.
Example:
Below is an example of what you might see if you change your package after your bill is issued.
Mr. Smith is on the Unlimited Evening and Weekend Plan and is charged in advance for his service. This is shown on the bill he gets every three months.
Mr. Smith's bill is issued on 1st May and will show the standard advance charges from 1st May to the 31st July, as shown below.
On the May 23rd Mr. Smith calls BT to change from the Unlimited Evening and Weekend Plan to the Unlimited Anytime Plan. Because he's already been charged for the Unlimited Evening and Weekend Plan on the bill from the 1st May, the changes he's made will be shown on his next bill.
When Mr. Smith's next bill is produced on 1st August, he can see the changes to his rental charges. You can see from the highlighted area on the bill pictured below that Mr. Smith has been refunded the charges he's paid in advance for his old Unlimited Evening and Weekend Plan.
This refund is from the time Mr. Smith changed the package (23rd May) until the end of the previous billing period (31st July). The refunded amount shows as -£35.63.
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

I need help. every time i turn on my laptop an error message pops up: the procedure entry point sqlite_wao -checkpoint could not be located in the dynamic link library SQLite3.dlll HOW DO I FIX THIS?

i need help. every time i turn on my laptop an error message pops up: the procedure entry point sqlite_wao -checkpoint could not be located in the dynamic link library SQLite3.dlll HOW DO I FIX THIS?

Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy

Hi I need help first time here converting a file

Hi I need help first time here converting a file

Thank you for your subscription to our service. Please see below.
How to convert your file to PDF file:
Using Adobe Reader:
Launch Adobe Reader X or Reader XI
Select “Tools” and click “Sign In” link to sign in with your Adobe ID and password
Select “Create PDF” then click “Select File” button
Click “Convert” after select your file
Click “Download Converted File” link to download the file to your computer after the process is completed.
Using Web UI
Log into https://createpdf.acrobat.com/signin.html with your Adobe ID and password
Select “Convert to PDF”
Click “Select Files” button then choose your file Click “Download” button in the progress bar after completion of the process to download the PDF file to your computer.
Converted PDF files are stored at https://files.acrobat.com and you can log in with your Adobe ID and password. You can share your files with others or download them to your computer.
Please let me know if you have further questions.
Hisami

Need ABAP real time questions

hello ABAP gurus,
i am a fresh ABAper, technically very sound, but not getting job as a fresh ABAPer. So i am showing +2 years fake exp.
I usually clear the ABAP tech round, but always being rejected because of the lack of real time ABAP questions those r usually put/asked by the interviewers to trap the fake candidates.
If anybody having such question and answers, plz open to the SAP community.
it will be really the most rewardable help to all ABAP freshers.

You'd think so, but in some countries it can be very messy and costly to get rid of someone even if they did get the job dishonestly or under false pretences.
It also means that the person who made the decision to hire them has to admit he was wrong ...
I once saw a guy who'd been on two projects with a consulting firm - kicked off both within a few weeks and spenmt a year on the bench - get hired as develpment manager. Now there were three guys from his ex-firm already on site and the dork who hired him didn't even think to informally ask them. When the penny dropped they tried demoting him and he threatined to sue.
You think Dilbert is fiction?

Need help big time. I need to change my apple ID but the original email address I set it up under is no longer used so i can't get my proper password sent to me. I don't want to set up a new account and lose all my old apps I have purchased.

need help. Before I set up my I-pad i need to regain access to my I-Tunes account, easy enough. The problem is I cannot re-set password. I have tried to re-set and send to my designated email but it does not work. How can i get someone from Apple on the phone to help?

Have you forgotten your password? - if so, you have a problem if the email address has gone dead.
If you know your password, go to the iTunes Store, click on Account. log in and you can change the associated email address.
If you don't know your password, and have no email address, you are going to have problems because it's difficult to see how Apple are going to identify you as the authorised owner of the account. Contact iTunes Support: go to http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'. You will see a link to either 'Express Lane', which will guide you eventually to some contact options, or you may see a link to email them.

Need help with my billing

I need help with my billing

Pleaes go to this website for itunes support:
http://www.apple.com/support/itunes/contact/
Good luck friend.

I need help updating my billing information!

For some reason the latest payment for my creative cloud subscription did not come out of my account, I now have a prompt telling me that CC will stop working in 2 days, and that I need to update my billing information. I have done this, however it does not seem to have fixed anything and I still receive the warning message when I open CC. I need to get this fixed as I have projects on the go that can't wait.

Open iTunes on your Mac. Go to Store > View Account from iTunes' menu. Sign in. Change your billing information there.

HT201304 i need help blocking safari for explicit material for my iphone 4s. any ideas

i really need help setting up a parental control of some kind on a iphone 4s for mt 12 year old son any help would be appreciated.

You can't restrict Safari on the iPhone other than to turn it off. My recommendation is that you turn it off in restrictions, then use an alternate browser from the app store that offers this capability, such as McGruff Safeguard Browser.

Need help in getting information/training material for SAP CRM (Functional)

Hello,
I am a SD Consultant.
I want to learn SAP CRM (Functional) on my own without going to any training institute or some thing.
Therefore, can anyone help me in forwarding the link(s) or document(s) with which I can learn about SAP CRM (Functional).
I want information/training material regarding SAP CRM 7.0 (on system/software working, not the general information, for example- why CRM, where CRM, etc)
For example, about org data, org structure, possible scenarios, etc.
Thanks in advance for spending your valuable time for me.
Regards,
T. Chaitanya
<<Moderator Message: Sorry, can't do. Search!>>
Message was edited by: kishan P

Hi Chaitanya,
Since You are already a SD Consultant, We assume you are very much familliar with SAP and for you CRM will also be not a big Deal.
Customer Relationships Management (CRM) is a model for managing any Organization's interaction with current and future customers. It involves technology to organize, automate and synchronize SALES, SERVICES(postsales) AND MARKETING(presales).
First of all you need to get SAP CRM installed in your system and then you need to get command over Account and Contact Management (Business Partner). The same can be learned using WebUI or GUI. From GUI the transaction launcher is WUI then web page opens up enter your credentials and select Role - Salespro. Open the Account and Contact section and do some R&D and you can learn. But in GUI you need to go to SPRO -> IMG -> Cross Application Components -> SAP Business Partner -> Business Partner -> Basic Settings -> Number Ranges & Groupings -> Define Number Ranges. Here you have defined number range then you need to assign to some group created from SPRO same way. And Finally maintain Business Partner using Tcode - BP.
Then You Learn Organizational Management which allows us to map our marketing, sales, service structure maintaining company's structure including the position and Employees in an Application and assign specific attributes to the otganizational units.
Path: SPRO -> IMG -> CRM -> Master Data -> Organizational Management -> Organizational Model -> Create Org Model/Change org model.
Just Go ahead and with some more R&D in the system and taking of F1 Help of SAP Documentation I think you can easily learn SAP CRM.
Regards,
Piyush

NEED HELP WITH TIME CAPSULE!

Hello, I am new to this forum and this is my first post. Currently I have a Macbook pro and it is really the only computer in my house I use. My Mom has a Macbook, My dad has a Apple Desktop and my brother a toshiba laptop.
I am running OS X 10.5.8 on my macbook pro, Snow Leopard on the other.
Tonight I got the time capsule, and I am really excited to get this working. To give a little background, I have FiOS and our modem is in the basement which runs directly to a verizon wireless router, MI424WR to be exact. I have a few questions about how to set it up because I tried to set it up like they said but when I plugged the Time Capsule into the Fios router and turned it on all I got on the Capsule was the blinking amber light. I ran an ethernet cord from one of the opened LAN ports on the router to the WAN port on the Capsule. I installed the Airport utility on my macbook and my dads desktop but still do not get any type of connection to the capsule. I am reading about bridging so I tried to do the manual set up in the Airport utility it just scanned and got nothing and I cannot even hit manual setup. My questions are..
How exactly do I set up the Time Capsule, as I described it does it sound like I have everything plugged in correctly?
Is it possible to completely get rid of the verizon router?
How do I get any of my computers to pick up the time capsule?
If you have any questions as to how I explained please just ask. I am really trying to get this set up because I do not want my dad to think he wasted 350 dollars on something that is completely useless for our home setup. Any help would be greatly appreciated. THANK YOU, Zach.

No matter what, even when the TC is plugged into my MBP with an ethernet cable it does not read it.
Disconnect any ethernet cables that you connected to the Time Capsule at the moment
Hold in the reset button on the back until the amber light begins to blink more quickly and continue holding the button another 4-5 seconds when this occurs. Then release the reset button.
Connect an ethernet cable from one of the available LAN <-> ports on the Verizon router to the WAN (circle of dots icon) port on the Time Capsule.
You have two ways to configure the Time Capsule using either wireless or ethernet.
To use wireless, click on the fan shaped Airport icon at the top of the computer screen and look for a wireless network with a name like Apple Network xxxxxx. Log on to that network first, then open AirPort Utility.
To use ethernet, temporarily connect an ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule. Open AirPort Utility.
When you open AirPort Utility, click Continue to follow the guided setup. You did not indicate whether you want to Time Capsule to provide a wireless network, but most users want that option. So, you when asked how you want to configure the Time Capsule, you would choose the "Create a new wireless network" option.
As the Jolly Giant says, you will need to choose Bridge Mode when you see a choice of how to connect in the setup process. If you are an experienced computer user, you may want to configure the Time Capsule manually, but I would not recommend that you do this unless you know exactly what you are doing.
My next step is to call verizon and say they need to get out here and fix this ** or I will be going back to comcast.
Verizon has nothing to do with the Time Capsule problems that you have encountered. Blaming them will accomplish nothing.

Need help understanding Time Capsule file structure and how to get it back

I have the original Time Capsule on which I backup both my Mac Pro and my wife’s Macbook. When Snow Leopard came out, I successfully used the ‘Restore from Time Machine’ feature on my Mac Pro so I know it has worked. However, my wife’s MacBook harddrive died the other day and I was trying to do the ‘Restore from Time Machine’ and all it would find was a backup from April (when I put her in a new larger drive). Time Machine would not find any backup files newer that April. She stated that she had seen the the Time Machine backup notices regularly and as recent as the day the haddrive died (Nov. 23) so I figured that I should have no problem. Here is what I have found in my trouble shooting and what leads to my questions below.
This is the file structure I found: (note that our ID’s are ‘Denise’ and ‘John’)
*Time Capsule* (the drive as listed in my Finder window sidebar under ‘shared’)
>Folder called ‘Time Capsule’ (when logged in as either ‘Denise’ or ‘John’)
>>Denise Sparsebundle
>>>Backup of Denise’s iBook (mounted image)
>>>>Folder called ‘Backups.backupdb’
>>>>>Folder called ‘Denise’s iBook
>>>>>>Single folder with old April backup (not the right files)
>>John Sparsebundle
>>>Backup of John’s Mac Pro (mounted image)
>>>>Folder called ‘Backups.backupdb’
>>>>>Folder called ‘John’s Mac Pro’
>>>>>>Folders containing all my backup files
>Folder Called ‘Denise’ (if logged as ‘Denise’)
>>Denise’s Sparsebundle (a disk image)
>>>Backup of Denise iBook (the mounted image. Name from old machine)
>>>>Backups.Backupdb
>>>>>Denise’s iBook (Contains the backup I need)
>Folder Called ‘John’ (if logged in as ‘John’)
>> (empty)
For some reason, my wife’s backup files are stored within a folder located at the top level of the Time Capsule drive called ‘Denise’, however, mine are within a folder called ‘Time Capsule’ which is at the same level as the ‘Denise’ folder.
For some reason, when trying to use Time Machine to recover, it bypasses the top level ‘Denise’ folder which contains the correct files and goes into the ‘Time Capsule’ folder and finds the outdated backup files.
I would assume that both my backup files and my wife’s should be at the same level of the Time Capsule.
I was eventually able to use Migration Assistant to recover the files after installing a fresh OS and mounting the correct Sparsebundle image.
So, my question, how do I get this fixed so that if I have to recover a drive with Time Capsule, it will find the correct files.
Sorry for the long post and thanks in advance for any help.

John Ormsby wrote:
What I was trying to determine is why different backups for one particular machine are located at different file structure levels on my Time Capsule and why the most resent one for that machine is at a different level that for my other machine. Also, what is the correct level that both machines backups should be at.
well John, first can you clarify if you are on 10.4.8 as your profile suggests ? if so, i'm wondering how you can use TM at all because TM was introduced with Leo. if you're not on 10.4.8, please update your profile. if you could, please also indicate details of your machine such as available RAM, processor, etc.
second, what OS is your wife's machine running ?
third, i frankly don't know too much about TM's file structure or if there indeed is such a thing as the correct one. however, i do know that it is best to leave TM to do its thing (as long as it's working). FWIW, though off-topic, you may want to have a look at this read for further information.
last but not least, i see TM backups to my TC only as a part of my backup strategy. the backbone of my strategy is to create bootable clone of my startup disk(s) using e.g. Carbon Copy Cloner on a regular basis. while TM is capable of doing a full system restore, i don't trust it as much as a working clone. i use TM to retrieve a file i accidentally trashed a week ago but you cannot boot from a TM backup if your startup disk goes belly up.
If I have missed this information in either the FAQs or the Troubleshooting article, I would greatly appreciate being pointed to it .
i expect you didn't miss anything and i'm sorry you didn't find any help there. perhaps if Pondini (author of the FAQ and troubleshooting user tips) reads this thread, you will get the necessary advice on the file structure and more besides.
good luck to you !

Need help in Time Series report

Dear experts,
I have a report tcode : S_ALR_87012257, that displays a 10-year actual/actual comparison for a certain GL. The user wants to add a check box where he can choose to display GL accounts with ZERO balances.
If i need to customize the report by making it into ZS_ALR_87012257.. what is the real program behind it? i've checked the source code.. and debugged it..
but it is like calling an FM one after another.. it shows
as the name of the extended report..
D_SREPOVARI-EXTDREPORT = 'FBR 01RFRRS01 0SAPBLNCE-10' -->> it doesn't make any sense to me..
and i couldnt find a program called whether 0SAPBLNCE-10 or 01RFRRS01 or etc to make it into a customized program..
or is this just a functional guy's work? if so, pls tell me..
so, if anybody knows, pls help me..
thanks in a million..

I had trouble with Hyperion reports doing the same thing and Hyperion reports uses report scripts in the background. For me it was worse, It would lose knowledge of the DTS members. The only way I could get it to correct was to stop the reports and Essbase services and restart them. IT tended to occur during heavy report activity. I could never get an answer from the help desk that solved it othen than to do what I was doing recycling the services.

Need help Using Time Capsule As Media Server

New time capsule owner was wondering if someone could help me set it where i can put all my digital media, Itunes, Dvd-rips on to the TC and use it as a Media Server.
Thanks for your help fellas

You will need to run media server on a PC / Mac and use TC as NAS that stored your media files.

NEED HELP BIG TIME!

I wrote a few days ago about this and was told that gathering
information from a form using Post as the method and having the
results emailed to someone wasn't a good idea and that it didn't
work very well. People basically told me to investigate scripting
or hiring someone, or use a pay service like MailChimp. None of
these are options for me right now, I absolutely have to get this
site done tonight and the person I'm doing it for will not pay for
a service.
The client wants to have a form on his site to collect email
addresses so he can compile them into a mailing list to send out
infrequent emails notifying people of upcoming events he's putting
on. He's a local artist with a very modest following, nothing big
time. I have no idea about databasing or MySql, and the person
doesn't want to pay for a service, so basically I'm stuck doing it
the "unreliable" way.
Can someone walk me through how to do this in Dreamweaver? I
assume I add a form field, and put a text field and submit button
inside of it. Here's my questions, to get this to work and use the
mailto: thing, what do I put for...
Form Field: Name, Action, Method, Target, Enctype
Text Field: Name
Button: Type, Name, ID, Value
Any help would be greatly appreciated by one stressed out,
hack web designer, thanks!

If this client doesn't want to pay for a service then tell
him the best
you can do is gather INDIVIDUAL emails from his site and have
them
emailed to their email address. Then it's up to them to mail
out to
their modest following INDIVIDUALLY.
Basically you put a form on the site to collect the email
address of the
user. Like this:
<form name="emailForm" method="post"
action="formmail.php">
<p><label for="email">Enter email
address</label><br>
<input type="text" id="email" name="email"> </p>
<input type="submit" name="Submit" value="Submit">
</form>
You would then need to send the submitted form to a formmail
script
which will then send it on to the clients email address.
A free script named Formmail does exist if you search for it
in google
under Free formmail script
You would need to alter the script as per the instructions
which should
come with it and then upload it to your cgi-bin assuming you
have one on
your server.
You then point the form at the script by filling in the
action attribute
like:
<form name="emailForm" method="post"
action="
http://www.yourdomain.com/cgi-bin/formmail.cgi">
I no longer use formmail because it can be a bit of an issue
to set up
for beginners.
I now tend to use server side scripting like php to gather
the
information. IF you have php running on your server then
NateMail is
FREE and very very simple script to set up. It comes with
clear pdf
instructions that will do the job in about 10-15mins.
http://www.mindpalette.com/scripts/index.php#NMAnchor
xslamx wrote:
> I wrote a few days ago about this and was told that
gathering information from
> a form using Post as the method and having the results
emailed to someone
> wasn't a good idea and that it didn't work very well.
People basically told me
> to investigate scripting or hiring someone, or use a pay
service like
> MailChimp. None of these are options for me right now, I
absolutely have to
> get this site done tonight and the person I'm doing it
for will not pay for a
> service.
>
> The client wants to have a form on his site to collect
email addresses so he
> can compile them into a mailing list to send out
infrequent emails notifying
> people of upcoming events he's putting on. He's a local
artist with a very
> modest following, nothing big time. I have no idea about
databasing or MySql,
> and the person doesn't want to pay for a service, so
basically I'm stuck doing
> it the "unreliable" way.
>
> Can someone walk me through how to do this in
Dreamweaver? I assume I add a
> form field, and put a text field and submit button
inside of it. Here's my
> questions, to get this to work and use the mailto:
thing, what do I put for...
>
> Form Field: Name, Action, Method, Target, Enctype
>
> Text Field: Name
>
> Button: Type, Name, ID, Value
>
> Any help would be greatly appreciated by one stressed
out, hack web designer,
> thanks!
>

Need help - Real time Bill of Material Cost

Similar Messages

Maybe you are looking for