Need help:Scripting on windows and Sql Loader
Hi
I need some help regarding script work on windows machines i.e., how to write a script,the file extension,how to run the script etc,how to schedule it...
I also need the doc regarding sql loader(complete details.....)
Thanks in advance...
bye
The sqlldr utility is fully documented in the Oracle version# Utilities manual for your version of Oracle. You can find the documentation sets here on OTN for download or you can use the online versions at http://tahiti.oracle.com
There is a product called Script Works and it is documented by the vendor. Otherwise the details depend on the scripting language/tool you use: DOS, Perl, etc....
HTH -- Mark D Powell --
Similar Messages
-
Need help with ASA 5512 and SQL port between DMZ and inside
Hello everyone,
Inside is on gigabitEthernet0/1 ip 192.9.200.254
I have a dmz on gigabitEthernet2 ip 192.168.100.254
I need to pass port 443 from outside to dmz ip 192.168.100.80 and open port 1433 from 192.168.100.80 to the inside network.
I believe this will work for port 443:
object network dmz
subnet 192.168.100.0 255.255.255.0
object network webserver
host 192.168.100.80
object network webserver
nat (dmz,outside) static interface service tcp 443 443
access-list Outside_access_in extended permit tcp any object webserver eq 443
access-group Outside_access_in in interface Outside
However...How would I open only port 1433 from dmz to inside?
At the bottom of this message is my config if it helps.
Thanks,
John Clausen
Config:
: Saved
ASA Version 9.1(2)
hostname ciscoasa-gcs
domain-name router.local
enable password f4yhsdf.4sadf977 encrypted
passwd f4yhsdf.4sadf977 encrypted
names
ip local pool vpnpool 192.168.201.10-192.168.201.50
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 123.222.222.212 255.255.255.224
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 192.9.200.254 255.255.255.0
interface GigabitEthernet0/2
nameif dmz
security-level 100
ip address 192.168.100.254 255.255.255.0
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
interface Management0/0
management-only
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
ftp mode passive
dns server-group DefaultDNS
domain-name router.local
object network inside-subnet
subnet 192.9.200.0 255.255.255.0
object network netmotion
host 192.9.200.6
object network inside-network
subnet 192.9.200.0 255.255.255.0
object network vpnpool
subnet 192.168.201.0 255.255.255.192
object network NETWORK_OBJ_192.168.201.0_26
subnet 192.168.201.0 255.255.255.192
object network NETWORK_OBJ_192.9.200.0_24
subnet 192.9.200.0 255.255.255.0
access-list outside_access_in extended permit icmp any4 any4 log disable
access-list Outside_access_in extended permit udp any object netmotion eq 5020
access-list split standard permit 192.9.200.0 255.255.255.0
access-list VPNT_splitTunnelAcl standard permit 192.9.200.0 255.255.255.0
pager lines 24
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu management 1500
mtu dmz 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static inside-network inside-network destination static vpnpool vpnpool
nat (inside,outside) source static NETWORK_OBJ_192.9.200.0_24 NETWORK_OBJ_192.9.200.0_24 destination static NETWORK_OBJ_192.168.201.0_26 NETWORK_OBJ_192.168.201.0_26 no-proxy-arp route-lookup
object network netmotion
nat (inside,outside) static interface service udp 5020 5020
nat (inside,outside) after-auto source dynamic any interface
access-group Outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 123.222.222.1 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 192.9.200.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpool policy
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet 192.9.200.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl encryption aes128-sha1 3des-sha1
webvpn
enable outside
anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 2 regex "Windows NT"
anyconnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 3 regex "Intel Mac OS X"
anyconnect enable
tunnel-group-list enable
group-policy SSLVPN internal
group-policy SSLVPN attributes
dns-server value 192.9.200.13
vpn-tunnel-protocol ssl-client
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split
default-domain value router.local
group-policy VPNT internal
group-policy VPNT attributes
dns-server value 192.9.200.13
vpn-tunnel-protocol ikev1 l2tp-ipsec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value VPNT_splitTunnelAcl
default-domain value router.local
username grimesvpn password 7.wersfhyt encrypted
username grimesvpn attributes
service-type remote-access
tunnel-group SSLVPN type remote-access
tunnel-group SSLVPN general-attributes
address-pool vpnpool
default-group-policy SSLVPN
tunnel-group SSLVPN webvpn-attributes
group-alias SSLVPN enable
tunnel-group VPNT type remote-access
tunnel-group VPNT general-attributes
address-pool vpnpool
default-group-policy VPNT
tunnel-group VPNT ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:36271b5a1b9382621e14c3aa635e2fbb
: endHi Vibor. Apologies if my comment was misunderstood. What I meant to say was that the security level of the dmz interface should probably be less than 100.
And therefore traffic could be controlled between DMZ and inside networks.
As per thr security level on the DMZ interface. ....... that command is correct. :-) -
Hi I just got a new MacBook Pro I need help transferring Bootcamp (Windows XP) from my old Macbook Pro to my new Macbook Pro Mac OS X 10.7.4 2.6 Ghz Intel Core 17. How do I make bootable clone of Bootcamp?
you can't just move XP even if you took the hard drive and have Windows boot and function.
Apparently there are Windows tools to sanitize the OS and strip all the motherboard drivers and services.
Time to get a supported OS. Don't want to pay, then use 8 for the time until it goes on sale.
There are no drivers for even Vista on 2011 and later Macs. -
Java for PI 7.1 EHP1 in Windows and SQL Server 2008
Hi Gurus
I try to install PI 7.1 EHP1 in Windows and SQL Server 2008. The questions is :
What version of java is the correct for this installation???
And where i can download it??
Thanks and advance!!!Hi Aaron,
The version for PI 7.1 is 1.5, instead of the 1.4.2 of 7.0/3.0.
Anyway, for VM settings, you should refer to SAP JVM, which
is used for the PI 7.11.
Hope it helps!
Regards,
Caio Cagnani -
Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
My Mac runs lion and the windows desktop runs Windows XP
I have tried for a few hours or so to connect my mac to this printer over a home network.
For your information it does work when connected directly to my mac using a USB Cable.
If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.
-
I need help importing navigation bars and rollover buttons from fireworks?
I need help importing navigation bars and rollover buttons from fireworks, drop down menus and rollover states won't work!
ThanksIn my experience, the code created by graphics apps is less than satisfactory. And image based menus are very awkward for several reasons.
#1 If you decide to change your menu later, you must go back to your graphics app and re-craft the whole thing. After 2-3 times of this, it gets old in a hurry.
#2 Image based menus cannot be "seen" by search engines, screen readers and language translators.
#3 CSS styled text menus are better for your site's visibility, accessibility and they are a snap to edit in Dreamweaver.
That said, if you're still married to image based menus, use Fireworks to create images only. Use Dreamweaver's Image Rollover Behaviors to create your rollover scripts.
Nancy O. -
In Scripts Variable window and constant wind difference?
In Scripts Variable window and constant window difference?pls help me
Hi
VAR - Window with variable contents. The text can vary on each page in which the window is positioned. Variable windows are formatted for each page.
CONST - Window with constant contents which is only formatted once.
CONSTANT WINDOW
A window of type CONST has the same contents and size on all layout set pages, on which a corresponding page window is defined. This allows the processing of the window contents to be optimized internally.
Page windows whose allocated window is of type CONST must have the same size throughout the layout set. If a window of type CONST is full, all remaining text the application program wants to output in this window, is lost. Constant windows do not trigger a page break. In other words: all text exceeding the window size is simply truncated.
VARIABLE WINDOW
The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different layout set pages.
As far as the processing of the window contents is concerned, the system currently treats constant and variable windows alike. The only difference is that constant windows have the same size throughout the layout set.
Edited by: Jyothsna M on Feb 20, 2008 7:48 AM -
I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried.
Can you help? thankrevert back to Maverick that is what I had to finally do. This was the worst upgrade I have ever seen. Hopefully you have Time Machine backup and can revert back. It was pretty painless except for a few issues. I will wait until Apple gets their stuff together on this upgrade or may never will.
-
Need help with Blog, Wiki and Gallery
Hi Team,
Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
Please help.
Thanks,
Santosh Singh
Santosh SinghHello Santhosh,
Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
http://social.technet.microsoft.com/wiki/
http://gallery.technet.microsoft.com/ -
Need help FLASH not launching and not uninstalling "licensing for this product has stopped working" and " you can only install one adobe product at a time please complete the other installation" Flash was working absolutely fine before, I have no idea why this happened.
I am having similar problem. Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message. So now I can not run Illustrator, Photoshop, or even Adobe Reader. These are properly licensed for about a year. I get "License for product has stopped working". Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days. Was on phone support hold today for over 3 hours before line went dead with no help. What is up with adobe support? Can anyone help?
-
Hi I hope some one can tell me step by step how to fix windows 8.1, I can't update any of my Apps and can't install any new apps now and I get error code 0x80073cf9? But my problem is different than most of the other FIXES I read about, because nothing
fixes my problem to be able to install new Apps and get app updates and stop getting that error code?
I keep getting same error code 0x80073cf9 after I try any of the FIXES I have read about and tried all the fixes on my Lenovo Z580 laptop, that came with windows 8 and updated to 8.1. And ever since I bought this laptop I could
always install and update all my apps for the last year when I had Win 8 and Win 8.1 now. This has been going on since April and May and its driving me crazy! And from the May updates I did get all the updates and
I also installed the KB update that said I need this KB to get all updates in the future.
But all the other people when they get this error code they could not even open and use any of their Apps already installed. And they also get the error code when they try to update or get a new apps.
But I can click on any APP installed already and use all my Apps with no problems. I have read so many how to fix this error code but nothing works! :-( I have tried a lot of
the fixes on Microsoft forums that says do this and the fix will get rid of the error code but I keep getting the same error code after I try that fixes. And I have read a lot of other windows 8 an windows 8.1 web sites when
I search for how to fix this error code? And tried all of the fixes that were different from the Microsoft forum fixes. But after I try those fixes I still can't install any apps or can't get my app updates?
Please to any person's who can help me by giving me more that 1 fix, because I have tried so many fixes, If you know more that 1 fix tell me how to do your fix step by step so I can understand what you say to do to fix my windows store?
Thanks for any and all help? And if I don't get any help in this section of the forum I will try to put this in a different area, if I don't get any help at this section of the forum I will try to ask this in another part of he forum ok?
I really need HELP with this so I can get my laptop working again to install new apps and get the updates to my apps?Fixed the problem by going to settings/store and logging out with apple ID. Then logged back in with password and updates, apps, and iTunes store seem to work ok now.
-
Need help with Boot Camp and Win 7
I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp. I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1. That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
Thanks.
MikeMike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger -
Need help on: Automation of Daily Data Load
Hi all,
We need to start our Daily Data load from DAC by Manually. So right now my client has asked us to do Automation of Daily Data Load.
Starting the Daily Data Load Manually(DAC) Process: First we have to check whether the ASCP Plans updated or not
Right now we are checking whether the plans got updated or not, so for this we are using following query
SELECT LTrim(RTrim (compile_designator)),data_completion_date,TO_CHAR(data_completion_date ,'DD-MON-YYYY HH24:MI:SS') FROM apps.msc_plans
WHERE LTrim(RTrim (compile_designator))
in( 'Plan01,'Plan02','Plan03','Paln04') ORDER BY 2 desc
from this query we will able to see whether all the plans got updated or not. From all the Four Plans, two plans will get updated as of Sysdate(mm/dd/yyy) ,Timestamp(hh:mm:ss)(for example i.e. Plan01 08/25/2011 11:20:08 PM, Plan02 08/25/2011 11:45:06 PM) and rest two plans get updated on Sysdate+1(mm/dd/yyy), Timestamp(hh:mm:ss)(for example i.e. Plan03 08/26/2011 12:20:05 AM, Plan04 08/26/2011 12:45:08 AM)
So after checking the plans , we start the Daily Load in DAC manually.
May I know how should I convert my above sql query which I am using for checking the plans updated or not in informatica, so as to automate the Daily Load in informatica level..
Need help.You cannot replicate what is done with DAC at Informatica level. DAC is a separate Oracle product that orchestrates and manages the ETL load (including Index management, etc). The reason Oracle developed DAC is because it allows you to manage a large scale DW load for a large ERP system. As suggested, you can invoke the DAC execution plan via a command but you cannot replicate everything the DAC does at Informatica level. If this helps, please mark as helpful.
-
Hi,
(I don't know if this is where I should post this, so if somewhere else is more appropriate, please let me know)
I'm building a window (might say a popup window). What I need it to do is this. I'm working in the gui. When the user clicks the button "load", it launches this window. In this window, the user selects what they want to load. They can select their option and click load, they can double-click on their option, or they can click "cancel". When any of these three happen (and only then), I want this window to return a value of "long" in accordance with what they selected. (What it returns doesn't really matter). So, basically, it will work almost the same a JOptionPane. (However, I don't want to use JOptionPane).
However, I can't figure out how to do this. In JOptionPane, the window pops up and doesn't return anything until the user clicks one of the buttons. How can I make it so it won't return anything until the user does one of the three choices I listed above.
I tried to use wait() and notify() but that didn't work either. (I don't know how to use them). Anyway, I don't know that that's the best way.
I looked at the source code for JOptionPane and tried to track down how it does it, but I couldn't narrow it down.
Could anyone please help me?
(If I need to explain better, let me know).
Thanks,
Daniel LorimerYeah, I converted mine from using JFrame to JDialog and it does what it's supposed to. I didn't realize that JDialog has basically all the same features as JFrame. So, I guess I'll use JDialog for this one.
However, I was hoping that the solution that I got would work for everything -- Which I don't think it will. JDialog is more like a popup window (which is fine), and JFrame is more like a main window. I want to figure out how to do in JFrame what JDialog does with setModal(). (I think I tracked it down to Dialog.show() -- however, it didn't work when I tried to implement it on my own.)
Do you know, is there already something like this (for JFrame), or would I have do it on my own?
Thanks,
Daniel Lorimer -
Need help scripting a sliding volume scale.
Hi, I hope this is in the right section, I am trying to make
a flash flv player (sort of like youtube) for my site. I have it
practically done but need a better volume adjustment. Currently, I
have only been able to figure out how to make a sound on/off button
but what I would really like is the volume control found on this
player.
http://www.jeroenwijering.com/?item=JW_Media_Player
Could someone please help me with the script for it? I am
really new to flash but I made the following 3 objects in the
library. Solid black graphic in to a movie object, 1 solid black
graphic in to a button, and one light grey graphic in to a button.
I assume I need a script for each of those 3 objects. Thanks for
the help!
P.S. Using Adobe Flash CS3 Trialyou need to submit it to another file which in turn will
insert the information on the fold field using SQL. for example...
INSERT INTO contact
VALUES FORM.Firstname, FORM.LastName, FORM.Phone
I don't know what programming code you are using (Coldfusion,
PHP, ASP ..etc).
Here's more information.
http://www.w3schools.com/sql/sql_insert.asp
Maybe you are looking for
-
Sony PC Companion Saving Update to Wrong Drive
Hi I have an SSD with my Win 8.1 loaded and a HHD with all the programs, data, etc. I have an update waiting for my Z3 Compact but the Sony PC Companion keeps trying save the update to the SSD which doesn't have enough room. Thre is no option to tell
-
I am completely confused by this. Should all photos loaded into iphoto show up? What makes some different from others? Does it matter if they are on the desktop first, straight off the camera, or sent to me via email?? Why should they be different in
-
Change gl account in MIGO by using user exit
Dear all, Could you tell me how to use user exit to change the gl account in MIGO? I have searched in SDN and found some code. In user exit: MBCF0002 ( EXIT_SAPMM07M_001 ). FIELD-SYMBOLS <F2> TYPE ANY."Field Symbol for the GL ACCOUNT DATA : W_KONTO_N
-
Complete novice! how do i install ms office on macbook pro - have disks and USB superdrive
Hi, I'm a complete novice. How do i install MS Office on MacBook Pro - have disks and USB Superdrive?
-
JComboBox remaining selected in JTable
I have yet to figure out how to fix this problem. I have a JTable that is refreshed often with new data from a database (Next and Previous). If I select a JComboBox in the JTable, when I select Next or Previous the box remains selected and the value