Need help setting up network printer...

Good afternoon.
I have an HP 2600n printer connected to my network through my router... I've got the printer working through my Windows Laptop and printing over the network. I have the printer assigned a static IP address.
I can't for the life of me get it to show up, assign it, or anything on my mini... I've got two more Apple iBooks in my house that I want to set up too, but thought I'd start with the mini. Tried the istallation disc, and it goes through and tells me the install is finished. Gone to print utility, etc... just can't figure this one out.
If anyone can give me a hand it would be greatly appreciated.
Thanks

Okay, I just needed to know...
Another thing you can check is your AppleTalk setting. Go to your System Preference, Network, (Ethernet or Airport, however you're connected to your network), AppleTalk, and make sure AppleTalk is active.
If not active, activate it and apply the change and go back to printer setup, add, IP Printer and hit more printers button at bottom, it'll give you another window for AppleTalk printers, see if you printer comes up there.
I hope this helps,
Alex

Similar Messages

Need help setting up Network on iMac so I can WiFi my iPod Touch

Have 1st Gen iPod touch with Stanza app (book reader). Need to set up WiFi Network connection on my iMac (Leopard 10.5.5) so I can connect to internet with iPod touch and download books into Stanza. Need detailed info on how to do this, please. I've tried using the setup assistant in Network, but nothing I enter works. I use BellSouth DSL internet service, so don't have to log in each time I turn on DSL. It appears it's a DHCP configuration. Can anyone help me with this, please. Thanks very much.

Thanks for your reply, Julian. Actually, I'd had my iMac set up properly since last Sept., but my brother has now moved in with me and he also has a new iMac and a new iPod touch and I was trying to remember how to set up the network on his Mac so he could use his Mac with his iPod touch to do his downloads using the network connection from his own computer. I do not have a router. We share our BellSouth DSL modem by simply moving it from one Mac to the other when we want to get on the internet. Both Macs have built in Airport, which is what I know I'd been using - I say BEEN using, because today I really screwed up my Mac when I was trying to remember how to set up the network and now I can no longer use my iPod touch-to-iMac WiFi function either.
When I first set up my network, I got help from someone in a forum and thought I'd printed and kept the very simply instructions he gave me, but I can't find them. I seem to remember him telling me I'd have to get my Mac's IP address, which I have, but when I go thru the network setup assistant it doesn't ask me to enter it anywhere. Also, the setup assistant tells me that I can't connect automatically to the internet, which is not true. I don't have to log in when I plug in my modem - I'm automatically connected.
I'm familiar with internet sharing, cause that's what I've been using when I downloaded apps updates, etc. But now, I can't even get Airport to turn on. The more I try, the more confused and frustrated I get. I'm usually pretty good with this kind of thing, but I'm completely baffled now.
I do want, and think this is what I was doing before I screwed things up today, to share my Mac's wired internet connection to the iPod touch wirelessly, as you said, and which is what I'd been doing. Can you help me? It was so easy the last time I did this, but I just can't get it done now!
Did I screw things up because I already had one network set up on my Mac and was trying to set up another one on my Mac (just to test it out before I tried to do it on my brother's Mac)? HELP!
Thanks for your help.

Desperately need help with a networked printer and SMB sharing for windows

Complete xServ newbie here. I'm a windows/novell admin, with limited experience in Unix and Linux.
Against my advice, a client of mine that owns a small office of 20 people bought an XServG5 to act as a server for 20 mixed Windows PCs. File sharing services are working fine. I've created the users, set up groups and rights - that's all good.
I cannot get an SMB shared printer to work from the windows machines. They run through the network printer install just fine, it shows up online, etc. However, when print jobs are submitted they DO show up in the printer queue on the server, sit there for a while, and then get moved to the completed box.
They never print. There's not any indication that the job is even submitted to the printer. I can print to the printer just fine from the server itself, but the windows clients don't work, but they don't return an error message.
Print services are running on the server, I've configured the printer name to be less than 12 characters for the share, and indeed it does pop right up during the "add network printer" routine.
Ideas? I'm not even sure what questions I'm supposed to be asking, such is my ignorance of the OS. I do know that I followed the documentation to a T, and according to Apple this should work.
Thanks in advance for the help. I'm extremely frustrated.

We have the same problem. Our printer worked for about 2 years but failed similar to yours after a system update.
Can you go into the Windows service, Logs, Printer Service. Copy and paste the log here. What I am looking for is a line like lpr: CANNOTCONNECTCLIENT or something similar to this.
What I expect is that you have a problem where the cups defined printer is not usable. We can't get our problem fixed either - but am just curious if you have the same thing. We reloaded our server, applied all of the update and still cannot get it to work.
Again, I think it stems from the update.

Need Help setting up "Network Home Directories" or Something Similar

Alright so, I am sure the answer to my question exists but I have no idea what i am looking for as far as syntax is concerned. I have taken over as tech at a full mac School and have not touched a mac before in my life. I will try my best to give a detailed description without an entire life story.
My school has 10.4 on laptops which we run a script on to bind to a directory allowing them to access accounts created on our server. That part works fine. The problem we are having is syncing or saving any files/changes to these networked accounts. The accounts seem to have home directories created, i went through workgroup manager and set up login/out and background syncs, and nothing seems to work(Copy/save). This year it would have been nice to have the syncing feature since all student/teacher laptops would go back and forth from home and work. However next year will change a bit since we will keep all student laptops here and the teachers will still take them home. We also have desktops of course which do not move and will be accessed by the students.
I need to find a way for students to log into the server to access their account and have it automatically pop up displaying their own files/folder on any machine they access since they wont always be at the same machine. considering there will be upwards of 100 students accessing each machine, local syncing for this would not be a good idea. My best guess would be setting up network home directories so they can log into and work directly from the server and have nothing but the original OS installed on their local machine.
As far as the teachers go, Since they have one laptop the entire year and take them home the syncing method would be the best. That way they can come here, turn on their laptop, automatically sync as they log in, and save everything when they log out (or every so many minutes since some of them close it and just run home). I tried doing this with a student account but could not get it to work. My other problem with this is that the teacher laptops are 10.5 and I have no clue how to bind them to the directory since I was not the one who created the original script which is something i would like to reverse engineer to my standards since it has some nice little things in it I just wish to tweak.
A short recap of what i need:
1) Network based accounts with network home directories, nothing locally saved
2) Network Based accounts with Portable Home Directories, Syncing between local and server files
3) Bind 10.5 machines to server
4) Program to read and edit a script.
I somewhat know the terminology for PHDs and MHDs and have read a bit about those but still cannot get them to work, but I am extremely frustrated with my lack of terminology for NHDs (If that is what they would even be called) and have had a hard time finding any information on how to set them up. The only thing i found was stating that if the server goes down, so do the accounts. Which isnt a problem since we have multiple servers as well as last ditch local accounts for students to just access the computers.
As far as i know, our servers are running LDAPv3 w/ OD, maybe even not with OD, I really don't know. If anyone can give me any help with this it would be much appreciated. If you need any additional information let me know and I will try my best to get it to you. I may even be willing to wipe everything and start fresh if it is required since these havent been used much in over 2 years, only for drive mounting storage.

I received some information on another forum, however I am still stuck.
So i rebound a laptop to the server via Directory Access, created a new account using Workgroup Manager, set the Home Point in WGM for the Account to a specified folder on the server's raid and no luck.
The account authenticates with the server, but it saves everything locally and ignores the NHD. Anyone with any ideas?

Need help connecting to network printer using xfce and cups

Hello
please can someone assist me with setting up a printer.
I am running arch and xfce desktop.
I have an Epson Stylus Photo R800 USB printer connected to a wireless Belkin all-in-one Print Server.
I do not know how to connect to this printer.
I am not conversant in CUPS or network printing and would very much like to use the printer.
My arch box is connected through cable to a wireless router.
The print server is connected to the wireless router and the router confirms the print server is attached to the network.
The print server IP address is 192.168.0.100.
The printer server has a web interface which I used to set wireless and TCP settings. I should say that I went into this interface and configured the print server which is totally usable and fine from a Vista laptop using wireless - vista laptop "sees" the print server and prints over wireless, therefore I know the server and printer are working together and all the print server settings are fine. I dont know how Vista connects, it just does!
I tried installing gutenprint and foomatic, went into the CUPS server page (localhost:631) and found my printer but I'm not sure if my connection string (socket://192.168.0.100:9100) is correct. I've tried several values and several Epson drivers from the CUPS web interface, all to no avail. I just get this message:
bash-3.2# lpstat -t
scheduler is running
system default destination: Epson
device for Epson: socket://192.168.0.100:9100
Epson accepting requests since Sat 26 Jul 2008 22:53:35 BST
printer Epson now printing Epson-0. enabled since Sat 26 Jul 2008 22:53:35 BST
/usr/lib/cups/filter/pstoraster failed
I have no desire to be a CUPS expert nor a networking expert - I was rather hoping someone could guide me through the process, I have tried reading web links (google) but do not understand various pages and instructions.
bash-3.2# cat /etc/cups/printers.conf
# Printer configuration file for CUPS v1.3.8
# Written by cupsd on 2008-07-26 22:34
<DefaultPrinter Epson>
AuthInfoRequired username,password
Info Epson
DeviceURI socket://192.168.0.100:9100
State Idle
StateTime 1217108079
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
any ideas good folk?
Last edited by keratos (2008-07-26 22:07:45)

EDIT:
SOLVED!
the problem was that gutenprint needed to be installed.
I looked at the rastertops file in /usr/lib/cups/filter and it was very small, handfull of lines, but refered to gutenprint (whatever that is).
"pacman -Q gutenprint" revealed it was not installed.
All is fine now.
GREAT!

Need Help Badly With Network Printing

Alright im very new to macs but have managed to catch on quickly, the only trouble im having is adding a network printer.
I go to IP Printing in the Printer Browser then click more printers select Windows Printing then select my My Home Work Group which is what all the PC's in my house use and I click on the PC that has the printer conected to it usb and it asks for me to type in a name and password.
Question is what name and password do i use i tryed using the user name of the user and there password but it doesnt work it gives me and error 256

OK, then you may want to take this up in the Mac OS X Printing forum. You'll probably be more likely to get help there, since it's not a MacBook problem, per se.
For starters, you may find this thread or this thread helpful.
Good luck.

Need help installing Canon network printer on Mountain Lion

I am trying to install a Canon MF4270 network printer with my Macbook Air running Mountain Lion.
I added the printer using its IP, and selected the MF4200 driver from the list that came installed with the OS. The printer worked, but it would not allow me to print double-sided (the option was greyed out). Some research showed that other people with similar problems simply updated the printer driver.
I checked the driver version and it said 2.0. I went to the Canon website and downloaded the newest version of the driver, which said 2.43.
I re-added the printer with the new driver. Same problem.
So I deleted the driver and the list of associated files, given to me by Canon tech support (I verified then that the MF4200 driver was no longer on the list), then installed the new driver (restarting my computer at every step). I re-added the printer.
Now, it doesn't work at all. When I try to print, I get the following message: "Canon UFR II Printer Driver / Cannot communicate with the printer, or the printer is not supported. If the printer is supported, check the printer connection and add it again, then start Printer Utility to get the printer information."
I tried adding the printer using the Generic PostScript Printer driver, and when I print, it says that it is printing and I get no errors, but nothing prints.
Now, I can't print at all, and no one at Canon or Apple has been able to solve the problem.
Please help.

First, delete the print queue in the Print & Scan preference pane, if you haven't already done so.
Back up all data.
Triple-click the line below on this page to select it:
/Library/Caches/Canon/CUPSCAPT/CCPD/ccpd.conf
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file selected. Move the selected file to the Trash. You may be prompted for your login password.
Recreate the print queue.
Credit for this solution to ASC user PAHU.

Need help setting up and configuring rsync

Hello
I need help setting up, or rather configuring rsync to sync data between my brand new iMac and my Macbook Air.
Here is what I would like to:
- I want all of the files on both machines to be an exact mirror or copy of each other. Basically I have an iMac for at home, and then a Macbook Air for the road.
- The main folder on both Macs is called 'Sara' and I want the contents (mainly the 'movies' folder, 'music' folder, 'documents' folder and 'pictures' folder) to immediately sync up with each other when both of them are on my home network.
- this means if I'm working on a file at home on my Macbook, it will immediately write to the same directory on my iMac and vice versa (if I'm working on file(s) on my iMac, it will immediately save the contents to my Macbook). This way, if I'm working on last minute project my iMac, and then have to head out the door to the airport, the file is immediately saved to my Macbook (no usb for USB transfer).
- hopefully this makes sense??
Any help is greatly appreciated!
Thanks

It's a lofty but unrealistic goal. Rsync does not run automatically. There is no realistic method of instantaneously synching two computers over the internet or even on a LAN.
I would suggest you might try using Synk Pro which, in theory, can keep two devices in sync when they are both on the same network (and both have shared and mounted drives.)
If you must do this with rsync then I suggest a Google search for rsync tutorials.

Help Setting Up Wifi Printer...

I have gone to my parents house for the weekend and brought my Macbook with me. It seems he upgraded his old Dell printer for the new All-in-one Dell 948 Wifi. I can see the printer on my Network, but I can't seem to add the printer using my Printer Utility, can someone help set-up this printer. BTW I do know the IP Address of the printer and the MAC address, I was told I have to log into the Wifi Network in order to print, or I could do ad-hoc.
Cheers,
Paul

I don't thinl it's Postscript and I don't think there is a Dell Driver for it. Any third party solutions?

My Apple TV all of a sudden refuses to show my movies from my MacBook and says it needs to set time network. What is that?

My Apple TV all of a sudden refuses to show the movies from my MacBook and says it needs to set time network. What is that?

Welcome to the Apple Community.
The Apple TV should set it's time automatically from the network time server, if it isn't doing this try restarting the Apple TV by removing ALL the cables for a 30 seconds, if this fails try resetting or restoring it.

HOW TO?: Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Any devices connected to the same icloud account can sync all the data on that account. For this reason an icloud account is really for a single user.
On a mac, if each user has their own account, then the itunes for that mac account should be set up to connect to that user's icloud account (System preferences>icloud).

Need help setting up TV equiptment

I have been very ill and I need help setting up my TV, DVR, Receiver, Surround sound systems. I'm afraid if I try to work on all the equiptment, I'll drop my HDTV or other componets because I'm still weak. Can anyone help me? I've called a few places and they want $100.00 to set it up. Give me a break! I know about inputs and outputs and other cables, I just don't have the strength to move the equiptment around. I am willing to pay. Please call me at 813-{edited for privacy}. Thanks, Teresa {edited for privacy}

blondeinneed wrote:
I have been very ill and I need help setting up my TV, DVR, Receiver, Surround sound systems. I'm afraid if I try to work on all the equiptment, I'll drop my HDTV or other componets because I'm still weak. Can anyone help me? I've called a few places and they want $100.00 to set it up. Give me a break! I know about inputs and outputs and other cables, I just don't have the strength to move the equiptment around. I am willing to pay. Please call me at 813-{edited for privacy}. Thanks, Teresa {edited for privacy}
Teresa,
I think the best way for someone to volunteer to help you would be for them to send you a Private Message (PM) here on the forums. You should see a small envelope in the upper right corner of the screen, when it changes color you will know you have a PM to view.
I would be happy to help, but since I am in North Texas I don't think that is a viable option Sorry....
Justin
FiOS TV, Internet, and phone user
QIP7232, QIP7100-P2, IMG 1.9A
Keller, TX 76248

I need help setting up an apple id for my sons phone. It seems his email address has been taken and/or we cant get the password.

I need help setting up an apple id for my son's phone. It seems his email address has been taken and/or we cant get the password.

Two different things
If you forgot the password
If you forgot your Apple ID password - Apple Support
If the email ID you want to use is in use by someone else - then you may need a new one
The iCloud ID's are usually unique and may be of help if you set one up

Need help Setting up Multiple Static Ip , 1 for each port of the fios router

Need help Setting up multiple Static Ip on my fios router
I have been trying to figure out how to set up multiple ip in my fios router.
However I kind of managed how to set up multiple static ip However the way I want it is for each port of my router to have an external ip signed to it. ( like 4 different modem in 1 )
Verizon gave me 5 static ip but they can not help me how to set it up.
Have anyone here done more then one static ip on different ports? I assume that the process will be the after the second static ip.

You want to set up Static Nat. You will not assign the IP to a port, but rather to a local machine. Figure out what machines you want your IP's to go to. Under the firewall section you will see static nat. Pick the machine you want and enter one of the IP's you were assigned.

Need help setting up FCE 4 PLEASE

OK, I'm NOT a professional, just need help setting up.
Just purchased FCE 4. Need to set up my Sony HDR SR11. I've already recorded most of my stuff in HD SP. Can someone Please help me set up?
thanks

Thanks for the info.
I updated and did a search in my manual for Log and transfer which didn't go to anything I can figure out. Sorry, I don't have time to read 1152 pages.
Can anyone just tell me how to get this going? There should be a simple set up correct?

Need help setting up network printer...

Similar Messages

Maybe you are looking for