Need Help updating custom API Interface to VME-MXI-2
Need Help.
I have a custom Visual C++ 6.0 application that interfaces to the VME-MXI-2 card.
This interface works on older machines, but when we upgrade to new PC's, the interface works, yet it appears that communication exists between the hardware board, and the PC Card appears to be working properly.
I suspect that the drivers have a different interface, but need the interface documentation in order to verify this, can you help?
Older machines use: PCI-MXI-2, and the driver is: C:\Windows\System32\Drivers\vvxid.sys (File version 1.2) cpright 1996-2000
Newer machine has: PCI-MXI-2, and the driver is: C:\Windows\System32\Drivers\nipalk.sys (File version 1.61f0) cpright 2002
Alan,
As for reading and writing memory addresses from the VME memory map, you could use functions such as viIn8, viIn16, viIn32, viOut8, viOut16, or viOut32 in the NI-VISA API. You can find the NI-VISA Funtion help at "Start >> Programs >> National Instruments >> NI-VISA >> NI-VISA Help" for Windows. Alternativelly, the NI-VISA Programmers Reference Manual is available for download from ni.com.
What exactly is your application that uses ACFAIL? ACFAIL is typically pretty unrealiable, and is a difficult signal to catch (especially over a bus extension like MXI-2). Basically, ACFAIL is asserted right before a total failure/shutdown of the chassis, so you have a very short window of time to detect the signal before it disappears.
Regards,
Greg Caesar
App
lications Engineer
National Instruments
Similar Messages
-
Need to Update Customer Address and Email Adress in AR
Hi ,
I am new to AR.
I need to update Customer name and Email Address in AR. Can you please provide me if there is any API or Interface Exist.
Also please provide me the steps and the maditory values which we need to provide during the updation.
Regards
Suresh PCheck irep.oracle.com to find out about all available APIs
Also check
Oracle Integration Repository Documentation Resources Release 12 (Doc ID 396116.1)
IREP - Oracle Integration Repository: The Tool To Find Which API Is Supported and How To Use It ... (Doc ID 554986.1)
Hope this answers your question,
Sandeep Gandhi -
Need Help on tcUserOpsIntf API
Hello Friends..
Hello Friends I am new to OIM and I need help on tcUserOpsIntf API.
What is this API and specially for what purpose it is used, If i want to know more about it then where I will get help on this API. Please know me.
Thanks and Regards
DB
Edited by: DB1748590 on Jun 11, 2009 6:02 AMAPIs are the the inbuilt methods by wich you can uery the OIM database to fetch any value to upate any value or other operations according to API you are going to use.
APIs
[API Usage Guide|http://download.oracle.com/docs/cd/B32479_01/doc.903/b32449/chapter1.htm]
These two links help you in understanding the APIs as well as how to use it.
tcUserOperation are realted to tasks related to user like find user, update user, set challenege QA etc.
tcUserOperation -
I need help from Customer Support. Whatever this charge is on my credit card,
He recibido un cargo de su tienda, que curiosamente he visto que se han hecho muchos cargos a diferentes personas bajo el mismo copncepto y tienda.Favor acreditarme dicho monto porque no he comprado nada con ustedes y ni tengo idea donde está Minesota.Este es mi cargo. 23/07/15323343GEEKSQUAD RENE00015826 RICHFIELD UUSRD$1,428.010.00 Y veo en Internet que otros clientes han hecho reclamos del mismo concepto. Subject Author PostedGEEKSQUAD RENE00015826Care03-09-2015 06:30 PMGEEKSQUAD RENE00015826 Unknown ChargePriscillaQ12-29-2014 10:08 PMrandom 10 dollar charge from richfield MN to my ac...ChrisBurns07-01-2015 12:50 PMUnknown Geeksquad charge on my Credit CardHardingR12-01-2014 05:57 PMGeekSquad protection terms changed without being i... Lo que me hace pensar que algo anda muy mal en ese Best Buy. Como es posible que no hayan corregido e identificado quienes están detrás de este fraude que lleva años. I need help from Customer Support. Whatever this charge is on my credit card,jesmann10-05-2014 04:52 PM
Hola scj2000-
Muchas gracias por visitar nuestro foro en búsqueda de una explicación al cargo que recién apareció en tu tarjeta de crédito.
Entiendo su preocupación, ya que cualquier cargo extraño que aparece en un estado de cuenta puede ser alarmante. En este caso, el último cargo que puede recuperar usando el correo electrónico que usaste para registrarte al foro, refleja que se renovó un antivirus Kaspersky. Esta autorización nos diste cuando realizaste la compra de tu Lenovo, desde entonces se renueva automáticamente la licencia de antivirus.
Las otras publicaciones que has leído, indican lo mismo. Un cargo que se ha hecho a la tarjeta de crédito que se presentó durante la compra con la autorización del cliente.
Lamento mucho la confusión y espero esto aclare tu duda.
Atentamente, -
HT1267 i need help updating without wifi hook up. I was told I could do through my "itunes"
I need help updating without wifi hook up. I was told I could do it through my "itunes"
after selecting restore from backup, you should see a screen asking you wich backup (on the computer)
-
HT1338 need help updating to snow leopard
need help updating to snow leopard
Hi Billy,
First you need to research all the problems people are having with the higher OSX versions, & make sure you have a bootable clone of what you have just in case.
then you must get 10.6 if they still have it, install it & update to 10.6.8 so you have the App Store to buy & download the huge 10.8 Installer.
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 4GB at least, more if you can afford it)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It's been pulled from the online store & Apple Stores, so you have to call Apple to buy it, last I heard.
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57 -
HT4623 I need help updated my iphone, please help
My need help updating my iphone, I went through the steps to update and now it shows connect to itunes, what do I need to do next.?
Rajan Gupta wrote:
...it is continuously showing an error.
See here > http://support.apple.com/kb/TS3424
Also see this discussion.
https://discussions.apple.com/message/21189708 -
I have Iconia Tab A500 running 3.0, need help updating, I downloaded all updaes list in the acer supprt, all versions, 3.0, 3.1, 3.2, and 4.something, I read on the acer support somewhere I can use a microsd card to update my device, because acer no longer provides automatically, when i try it says "poor network connection, move to anthoer location.", Do I need to update all the listed updates, or can i only update, using the 4. 0? to get the last known update. I also downloaded, "Documents, Apllications, Drivers, Patches, and O.S..... How do i intsall all these updates, I think am running the very lowest version available, Please Help me... Thank you in advance.
the update listed on the acer website, that mentions the a500 update is 'kernal source code (for Android 4.0 Ice Cream Sandwich) it's 96.7MB's released 2012/05/08' is that the right one i need? There is also a list of 3 O.S updates, released in 2014/09/05, 391.5MB's, 394.3MB's, and 391.5MB's large, what are those updates, I clicked the model and followed the directions that the acer website asks, and i ended with a list of update released in 2014/09/05, and a Document update released in 2014/12/17, 112.7KB's large, list of updates reased in 2014/.... and in the Android 4.0 culumn, there is an update that says O.S update released in 2014/09/05, 434.2MB's large, and a Patch Update, that was released in 2013/03/21, what are these updates? listedin the aver website... http://www.acer.ca/ac/en/CA/content/drivers
-
Need to Update Customer Email_address in R11
Hi Guru,
I am new to AR and i need to update only the customer EMAIL_ADDRESS for the customer.
So kindly provide if there is some sample query to update the email or IF there is any API or interface presetn.
Regards
Suresh PSuresh,
For customers details update in AR module, you may use HZ_CONTACT_POINT_V2PUB API
How to Create Contact,Phone, Email under Communication tab for Customer Account Site using API [ID 985500.1]
HZ_CONTACT_POINT_V2PUB.update_email_contact_point Does Not Allow Updating Email Address to NULL [ID 1313626.1]
Inactivating Contact Errors with Email_format APP-96282 "You cannot update column EMAIL_FORMAT to null" [ID 303522.1]
Search also eTRM/MOS/Google websites for details about this API and sample code.
Thanks,
Hussein -
BAPI_GOODSMVT_CREATE ---- need to update custom field in MSEG table
Greetings all,
I'm using 'BAPI_GOODSMVT_CREATE' to create goods movements. also I need to update one cutom field(z-field) in MSEG table. Could anyone please advice how can I update the custom field thru EXTENSIONIN.
thanks in advance.see the help
http://help.sap.com/saphelp_nw04/helpdata/en/c3/4099948b8911d396b70004ac96334b/frameset.htm
Regards
Kiran Sure -
Need Help: Generate Customer Data from Prod Database
Hi All,
My company have an Oracle Financial System, with and old version Oracle Application 11.0.3 and Oracle Database 8.0.5. The database name PROD. This system has been use for more than 7 years and in between there were many stuff resigned without handover and therefore many records and supporting steps cannot be trace back. However the system is still keep running and updated daily.
Recently we have a user request to generate out a list of customer company name, and their related products purchase from the database, this is because they does not have any methods to print out the list from application. Unfortunately, we do not know which tables or index is actualy storing the name of the customer and products. We have the list of below users accounts that able to log in to the database.
PA/PA
APPLSYS/APPS
APPS/APPS
ALR/ALR
AX/AX
AK/AK
GL/GLRG/RG
FA/FAHR/HR
SSP/SSP
HXT/HXT
OTA/OTA
RLA/RLA
VEH/VEH
QA/QA
ICX/ICX
AZ/AZ
AP/AP
AR/AR
OE/OE
OSM/OSM
NSM/NSM2020
CN/CN
MFG/MFG
INV/INV
PO/PO
BOM/BOM
ENG/ENG
MRP/MRP
CRP/CRP
WIP/WIP
CZ/CZ
PJM/PJM
FLM/FLM
MSC/MSC
CS/CS
CE/CE
EC/EC
JG/JG
APPS/APPS
All the reference documents is no longer exist. I am able to use SQL Plus to generate the list of tables with the command : select table_name from user_tables. Each user accounts will return different kind of table names. But still I cant locate which table that actually storing the name of the customers and products.
Is that anybody got hands on this case before? UrgentWe have this table: And need to unload this table data in flat file format.
Need help with unload SQL file with these two columns:
AMT_PAID_ORIG, AMT_PAID_ADJ
SQL> desc flconv.claim_adj_less
Name Null? Type
SAK_CLAIM_ADJ_LESS NUMBER(10)
SAK_CLAIM_ADJ NUMBER(10)
ADJ_CLAIM_ICN NUMBER(13)
ORIGINAL_CLAIM_ICN NUMBER(13)
DATE_PAID_ORIG NUMBER(8)
DATE_PAID_ADJ NUMBER(8)
AMT_PAID_ORIG NUMBER(10,2)
AMT_PAID_ADJ NUMBER(10,2)
SAK_PROV_LOC NUMBER(9)
SAK_FUND_CODE NUMBER(9)
CHECK_SAK NUMBER(9)
SAK_PUB_HLTH NUMBER(9) -
Need to update custom fields in MSEG table using "BAPI_GOODSMVT_CREATE"
Hi All,
There is a requirement to update custom fields in table MSEG which are part of append structure. There is a option to update the custom fields using the one of the tables parameters "EXTENSIONIN". Anyone please advice how can I update the custom field thru EXTENSIONIN.
Thanks in advance.
cheers,
Vijaysee the help
http://help.sap.com/saphelp_nw04/helpdata/en/c3/4099948b8911d396b70004ac96334b/frameset.htm
Regards
Kiran Sure -
Need help updating OS 10.2.1
I need to update my system software to 10.2.8. I have dial-up which is extremely slow, so I thought I'd update in parts rather than using the combo update. I had no trouble getting from 10.2.0 to 10.2.1. I've downloaded the 10.2.2 update three times. It seems to be working fine until I open the update icon. It says "The operation could not be completed. An unexpected error occurred (error code 1000)". I can't find anywhere what kind of error this is. I have an old imac. I didn't think that would matter since I'm already in 10.2.1. Any help would be greatly appreciated.
Hi JEL,
first of all: WELCOME TO THE DISCUSSIONS!
The 10.2.8 Combo Update is 97 MB, the sum of all interim updates is more than 136 MB. Furthermore I saw, that the 10.2.5 Update is not online anymore. Use a download utility such as SpeedDownload or iGetter to download the 10.2.8 Combo update. With these you can interrupt, pause and resume any download.
Also, do not forget to Repair permissions before and after an update! -
I need help updating the graphic drivers for my laptop.
Recently purchasd a new game and I am having some issues with the graphics. Every post I have read suggests it is an issue between HP and amd. I keep trying and seem to be going backwards. I would love to actually talk to someone from hp but they haven their number very well. I have tried every combination between hp and amd and I am obviously missing something. I dont have much hair left to pull out.
Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I read your post on the HP Support Forums and you had mentioned that you are looking for help Updating the Graphics Drivers on your HP Pavilion dv7t-6c00 CTO Notebook PC. I have the actual drivers page for your specific HP Pavilion dv7t-6c00 CTO. It has the AMD Graphic Driver on this page. You could also update the drivers a couple other ways. 1. Using the HP Support Assistant2. Going into the Device Manager, Right click on the AMD Graphic and doing an update. You had also mentioned that you wanted to actually talk to someone from HP. Please use the following link to create yourself a case number, then call and it may help speed up the call process:
Step 1. Open link: www.hp.com/contacthp/Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone number
Case number and phone number appear.
They will be happy to assist you immediately. Let me know how everything goes. Have a great day! -
Need help in customizing workflow
Hi All,
Need your help in customizing APINVAPR workflow.
Please help in clarifying below point.
How APINVAPR is mapped to invoice approval process,for PO we use document type form to map the POAPPRV workflows when we customize we will map the custom workflow XXXPOAPPRV to make our workflow work.
Similarly how will we customize APINVAPR and map the workflow, pls let me know your thoughts.
My requirement is to customize the APINVAPR workflow and increase the escalation days, during the Invoice Approval Process/Escalate Document Approval activity escalation will happen in 5 days, i need to increase it by 60 days.
If anyone have worked in similar requirement, please help.
Also while downloading getting following error
While downloading workflow APINVAPR, getting below errors
Item type APINVAPR
wferr:
- 1300: Could not load.
- 1114: Could not load from database.
- 1115: Could not load all definitions referenced by 'APINVAPR' item type.
- 1115: Could not load contents of 'APINVAPR' item type.
- 1101: Could not load item types from database. FILTER=APINVAPR
- 210: Oracle Error: ORA-01480: trailing null missing from STR bind value. SQL text: SELECT protect_level, custom_level, name, display_name, description, wf_selector, read_role, write_role, execute_role, persistence_type, to_char(persistence_days) FROM wf_item_types_vl WHERE name like :itemtype ORDER BY name
But it was fine when i downlaod POAPPRV.
Any one face similar kind of issues, please help.
Thanks
BadshaHello,
I am also getting the same error.
WFLOAD apps/apps 0 Y DOWNLOAD file_name.wft INVADJTO
Item type INVADJTOwferr:
- 1300: Could not load.
- 1114: Could not load from database.
- 1115: Could not load all definitions referenced by 'INVADJTO' item type.
- 1115: Could not load contents of 'INVADJTO' item type.
- 1101: Could not load item types from database. FILTER=INVADJTO
- 210: Oracle Error: ORA-01480: trailing null missing from STR bind value. SQ L text: SELECT protect_level, custom_level, name, display_name, description, wf_selector, read_role, write_role, execute_role, persistence_type, t o_char(persistence_days) FROM wf_item_types_vl WHERE name like :itemtype ORDE R BY name
The item type exists in system. It is a seeded one.
Can anyone help on this !!!
Thanks
Maybe you are looking for
-
Hello SDN While refreshing a query in a Workbook, I have received this error message and getting disconnecting form the BW server. "Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT" Does anyone has any idea? It is happening i
-
Error while starting the oracle listner
Hi , When i am trying to starting following listners 1.'OracleOraDb11g_home1TNSListenerall' 2.OracleOraDb11g_home1TNSListenerORCL i am shown the following message ' The OracleOraDb11g_home1TNSListenerall service on local computer started and then sto
-
In Lion I could annotate photos using Options in the screen saver preferences. In Mountain Lion how do you do this, if it can be done. I do not see an Options menu. I would like to show the name and date of the photo.
-
SAP Solutions StackExchange Q&A Site
At the risk of being labeled a spammer and being excommunicated from SDN, I am posting an appeal here which I posted on the Suggestions forum - you could construe this as being Coffee talk anyway : I have created a proposal on StackExchange for a Q&A
-
Restoring single mailbox from exchange edb backup
Hello everyone could any one please let me know that how to restore a single mailbox in case it is corroupted or the mails are stored on a pst file in the local pc and i have a backup as the emails to that particular address are being forwarded to th