Need Help w/ Updating to 5.0.1, Please

Sorry to open a new thread about this as Ive seen a few about this problem already but I havent been able to get a clear answer.
I have an iPhone 3GS on iOS 4.3.3 and am attempting to update to iOS 5.0.1. Each time I try to update my iPhone I get Error 3194. I got my iPhone way back when the newest softwares were the iOS 3's. Each time Ive went to update my iPhone I have never had any issue, never have gotten any errors before. I have been able to update my iPhone normally and then update it again the next time a new iOS update was released.
Im using a Windows computer and have Windows XP Professional.
This is the first time Ive encounter the 3194 error or any error of any sorts as Ive stated. Ive tried to update and Ive tried to restore my iPhone to factory settings first before updating and Ive gotten the error both ways. Ive updated my iTunes to the new 10.5.2, Ive restarted my computer multiple times, Ive made sure nothing except for my iPhone was plugged into a USB port, Ive made sure all my Windows XP updates were done. I have not unistalled iTunes and reinstall it though.
If uninstalling and reinstalling iTunes does not work, is there anything else I can do that could fix the problem? Is there anything I can do to fix the problem that is faster/easier than uninstalling and reinstalling iTunes?
Im getting an iPhone 4S soon and need to restore my current iPhone 3GS and update it to 5.0.1 so I can sell it. If someone could help me out I would greatly appreciate it.

you said you're using Windows XP .. if you know someone with Vista or Windows 7 try updating it again on those systems.. xp is pretty buggy since the newer iOS.. go here (http://www.iclarified.com/entry/index.php?enid=750 ) and right click on the 5.01 version for your type of iphone wether it be a 3GS or 4 and save as .ipsw .. then once downloaded open itunes and plug your iphone in hold the shift key and click restore, a new window will open, browse to the downloaded ipsw and see if it will restore..

Similar Messages

  • Will I lose my photos in recovery mode? I tried to update to latest software and I received a message that iphone needs to be updated to factory settings.  Please help.  I cannot use iphone.

    will I lose my photos in recovery mode? I tried to update to latest software and I received a message that iphone needs to be updated to factory settings.  Please help.  I cannot use iphone.

    I would "guess", since you were in the middle of backing up, your backup is corrupt & most likely unusable. Only one way to find out though, & that's by trying to restore from that backup. If your pics are not there, they are gone.

  • HT201541 I need help with updating my browser.

    I need help with updating my browser.  Its telling me that Safari is outdated.

    That is a very old version belonging to Snow Leopard. I take it you are not actually running Yosemite.
    Upgrading to Yosemite
    You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
    Upgrading to Yosemite
    To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks/Yosemite- System Requirements
          Macs that can be upgraded to OS X Yosemite
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • HT4623 I need help ASAP updating my jailbroken iPod touch 4th generation

    I have a 4th generation iPod that's jailbroke by Cydia, I need help to update it to IOS 6. From my ipod

    You can't, over-the-air update did not become available until iOS 5, you show iOS 4.1.
    And we cannot discuss jailbroken devices here per the moderators.

  • Please i need help i updated my iphone 3gs and now its not activating

    i need help i updated my iphone 3gs and now its not activating

    What happens when you try to activate the iPhone?
    If there is an error message, what is the exact wording of that message?

  • Need help for Update and cancel SalesOrder

    Hi All,
    I  written java code for create sales order based on salesquotation,now i want to update and cancel sales order ,i need help to update and cancel salesorder.
    can give any related links for update and cancel salesorder.
    Thanks and Regards,
    Srinivas

    Hi srinivas.L
    It is simple, here is some sample code. You must use getbykey to get the document. Then once you got it you can make whatever changes you need. Then update it. where i have oOrder.Update() you can have oOrder.cancel
    Dim oOrder As SAPbobsCOM.Documents
            oOrder = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders)
            If oOrder.GetByKey(530) Then
                oOrder.Lines.SetCurrentLine(1)
                oOrder.Lines.WarehouseCode = "01"
                If oOrder.Update() <> 0 Then
                    MsgBox(oCompany.GetLastErrorDescription)
                End If
            Else
                MsgBox("Nothing found")
            End If
    Hope this helps

  • I actually need help but cannot find the answer. Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as

    I actually need help but cannot find the answer.
    Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as blank as when I first open Firefox, it automatically loads my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
    Thank you.
    ''[Personal information removed by moderator. Please read [[Forum and chat rules and guidelines]], thanks.]''

    hello, please refer to [[New Tab Page – show, hide and customize top sites]] in order to switch the feature off.

  • Need Help in installations and connecting displays. Please!

    Hello Everyone,
    Need Help in installations and connecting displays. Please!
    Im planning on installing in a cafe shop : (Store Self improvement)
    4 TV's (can be  Built in Wi-Fi) Store menus
    2 touch screen tablets.  To be use as Emenu (digital Menu)
    1 60' TV ( Built in Wi-Fi) as Entrainment displays and in store advertising
    What do I need to organize my project and make it looks cool and how to manageand controll all of the displays TV.

    TNSTAAFL
    I DO NOT work for Best Buy, Geek Squad and any way affiliated with them. I am a self-employed repairman. I specialize in TV's and desktop computers. I do not take sides. If BB is wrong I will say so. If you are a moron with a false sense of entitlement, then I will tell you.

  • HT4199 I need help with getting my printer to print, PLEASE.

    I need help with getting my printer to print, Please.

    What have you done so far?
    I suggest you connect it via a usb  cable first.  Once you get the printer working, move to wifi.  You will have to use an existing printer usb cable or purchase a cable.  Be sure to get the correct cable.  Ask for help.
    The warrenty indicates there is phone support.  Give HP a call.
    Warranty
    One-year limited hardware warranty; 24-hour, 7 days a week phone support
    Robert

  • MOVED: need help with my k7n2 delta series motherboard please

    This topic has been moved to AMD SocketA based board.
    need help with my k7n2 delta series motherboard please

    "...the other memory ive been using is  memorymaxx 512mb ddr 3200..." If I understood right, your'e actually using both memories at same time so, your'e lucky if it works. We have said thousand times that mixing dif. brand/make/speed memories is a bad idea, most with this Mobo that is very picky about ram. If you want to avoid slowdown problems, stay with only one stick ( the better one ) until you can buy at same time in same store, 2 identical memories to replace the old one.

  • Dataguard - logical standby - need help - not updating data at commit

    Hi
    Need help ?
    We have logical standby setup where data is not updated at standby when committed at Primary. It only updates when alter system swith logfile.
    On Primary:
    log_archive_dest_2='service=xxStandby LGWR ASYNC valid_for=(online_logfiles,primary_role) db_unique_name=xxStandby'
    On Standby:
    we have already created standby redo logs ( 1+ # redo logs)
    we used ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE NODELAY;
    The data only ships when we do the ALTER SYSTEM SWITCH LOGFILE whereas it should so when data is commited on the primary.
    Is there anything we are missing or need attention.
    Please help
    Thanks you so much

    Yes, I have standby redo logs = ( 1 + # redo logs on the primary) and are of same size.
    I also changed the log_archive_dest_2 setting for valid_for to ALL_LOGFILES, but the performance is still very slow... we are now overr 9 hrs behind the primary.
    log_archive_dest_2='service=xxStandby LGWR ASYNC valid_for=(ALL_LOGFILES,primary_role) db_unique_name=xxStandby'
    The Logical standby performance reallly not good at all. trying to increase sga/pga more ... hoping this will speed up some
    Paul

  • I need help with updating my Ipod 5

    So i am updating my ipid 5 to IOS 7.0.3. I am doing it through Itunes on my computor. I have sucsessfully updated the ipod, and am now in the process of setting up the ipod after the update. I am connected to wif-fi, but for the past 20 hours all the ipod has said was "restoring ICloud settings". I need help! i dont know what to do
    Thanks!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - The try again.

  • Need help regarding updated rows

    Dear sir,
    need help on this query
    how many rows got updated when i execute an update statement

    If you are executing update statement from sqlplus session.
    Make sure "feedback" is turned on. It'll show numbers of rows updated just after the command;
    SQL> update tt1 set col1 = 1;
    0 rows updated.
    SQL> show feedback
    FEEDBACK ON for 1 or more rows
    SQL> set feedback off
    SQL> update tt1 set col1 = 1;
    SQL>Details about this sqlplus system setting:
    FEED[BACK] {6|n|OFF|ON}
    Display the number of records returned (when rows >= n )
    OFF (or n=0) will turn the display off
    ON will set n=1
    Regards,
    Ullhas

  • Need help in UPDATE data in SQL Query

    Hi all,
    I am trying to update data in the sql table as per below screenshot but couldn't able to do it. Can anyone help to update the data as I mention in screenshot.Appreciate you help.Thanks.
    Yellow highlighted columns are source
    Green highlighted columns are target
    Colored data should be update as per source data in sql table.Data is not static as it might have more rows to update and query should be bit dynamic.
    Maruthi...

    You have already asked this question once. You did not get any good answers, because you the information you gave was insufficient. And I'm afraid that the information is still in sufficient.
    Or more exactly, from the example you have given, the answer is: can't be done. And the reason it can't be done, is as I explained in response to you first thread: there is no information in the data to from which we can deduce that Clorox Company
    should be under "Week 1-1,K.B,F". The fact that rows are listed in a certain order in the screenshoot is of no importance, because a table is an unordered object.
    But you said in another post that you have a timestamp column. Maybe that column is usable - maybe it is not. But at least it is a key that you have more columns that the ones you show.
    The best way to get help with this type of problems is to post:
    1) CREATE TABLE statement for your table(s).
    2) INSERT statements with sample data.
    3) The desired result given the sample.
    4) A short description of the actual buisness problem you are trying to solve.
    5) Which version of SQL Server you are using.
    This makes it easy to copy and paste into a query window to develop a tested solution. Screenshots with an insufficient amount of data is not going to help you very much.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • MAC OS 10.6.8 Using Safari 5.1 Needing Help With Updating Adobe Flash

    Hello-
    Recently Adobe Flash installed an icon in my System Preferences and when I click the icon there are several tabs.  One allows updates to check automatically.  It says it will install the latest version of Flash without having to remove the previous version, but I have never been told that a newer version is available unless I clcik "check now."  although "Check for updates automatically" is checked, I do not know where it tells me a newer version is available.  Also, there has been 5 "newer versions" available since this icon was installed in System Prefeences, I have only found out about the newer versions when I clicked "Check Now."  If I read that with this new way to install the latest Mac version of Flash does not require me to uninstall the previous version of Flash how do I install the most recent version of Flash?  Does it come in an email?
    Since it is not telling me that there is a more recent version of Flash unless I click "Check Now" should I still do it the way I used to install the latest version of flash?  (The way before this icon was added to System Preferences)?
    I would appreciate help with updating Flash to the most recent version.  I used to uninstall the older version, restart the browser and download the most recent version and install it.  It always worked find but this was before there was an Adobe icon in my system Preferences.

    Hello,
    The way you used to do this (uninstall, restart the browser, etc.) is still definitely valid and probably the "safest" way to get a new version installed.  Uninstalling shouldn't be required, but it definitely doesn't hurt.  If you feel comfortable doing it the old way, please feel free to continue using that process.
    As for notifications, this is a bit trickier, but in general you should be notified within 30 days (or so) after a new player is released.  This usually occurs when the browser loads swf content.  Clicking the button will, like you mention, immediately check.  Another alternative to finding out when a new player is released is to subscribe to our Flash Player Releases feed.
    Is there a way to be automatically notified when a new Flash Runtime release is made?
    Thanks,
    Chris

Maybe you are looking for