Need help with Flash CS6 swf files

I have upgraded to Flash CS6 from CS5. My problem is now whenever I made an swf movie, install it into an html page then upload it is doesnt show up. I didnt have this problem with CS5. I run it in test and it works on my computer but when I upload it it doesnt. I have uploaded the script folder so that wouldnt seem to be the problem. I dont know what is going wrong. Some help would be greatly appreciated.
Thanks
Brent
http://baconball.com/index2013.html

open your fla is flash pro.
click file>publish settings
tick swf and html wrapper
click file>publish
upload the newly published swf and html to your server.
open the newly published server html using your browser.
any problem? if yes, post the url to your newly published html.

Similar Messages

I need help with controlling two .swf's from third.

Hi, thanks for reading!
I need help with controlling two .swf's from third.
I have a problem where I need to use a corporate designed
.swf in a digital signage solution, but have been told by the legal
department that it can not be modified in any way, I also can't
have the source file yada yada. I pulled the .swfs from their
website and I decompiled them to see what I was up against.
The main swf that I need to control is HCIC.swf and the
problem is it starts w/ a preloader, which after loading stops on a
frame that requires user input (button press) on a play button,
before the movie will proceed and play through.
What I have done so far is to create a container swf,
HCIC_container.swf that will act as Target for the HCIC.swf, and
allow me to send actionscript to the file I'm not allowed to
modify.
I managed to get that done with the help of someone on
another forum. It was my hope that the following script would just
start HCIC.swf at a frame past the preloader and play button, and
just play through.
var container:MovieClip = createEmptyMovieClip("container",
getNextHighestDepth());
var mcLoader:MovieClipLoader = new MovieClipLoader();
mcLoader.addListener(this);
mcLoader.loadClip("MCIC.swf", container);
function onLoadInit(mc:MovieClip) {
mc.gotoAndPlay(14);
But unfortunately it didn't solve my problem. Because there
is a media-controller.swf, that is being loaded by HCIC.swf that
has the controls including the play button to start HCIC.swf.
Here's a link to a .zip file with all 3 .swf files, and all 3
.fla files.
http://www.axiscc.com/temp/HCIC.zip
What I need to do is automatically start the HCIC.swf file
bypassing the pre-loader and play button without editing it or the
media-controller.swf in anyway. So all the scripting needs to be
done in HCIC_container.swf.
I know this is confusing, and its difficult to explain, but
if you look at the files it should make sense.
ActionScripting is far from my strong point, so I'm
definitely over my head here.
Thanks for your help.

Got my solution on another forum.
http://www.actionscript.org/forums/showthread.php3?t=146827

Need help with Flash CS4 buttons/can't get buttons to control anything

Hello,
I need help with Flash CS4. I am making a banner with an animation (Image change into movie clip "3D Spiral") and added buttons but I cannot get the buttons to control the animation. Please help I am frustrated! If someone could help I would be most appreciated.

Thank you.
Regards,
Michael J. Sheehan allelois
Date: Mon, 17 Aug 2009 18:48:09 -0600
From: [email protected]
To: [email protected]
Subject: Need help with Flash CS4 buttons/can't get buttons to control anything
Hi there
I'm not sure how you wound up where you did. But you wound up in the Adobe Captivate forums. Please stand by as I move your thread to the Flash forums.
Cheers... Rick
>

Still need help with flash player download

I'm still having a problem with the flash player, please read my last post below:
"I've tried everything here & still can't download the flash player. Anytime I try to download it asks me to install ADM add-on and then when I click on that, my computer freezes. How do I enable this add-on without my computer freezing? Can anyone help pls?"

Thanks a lot for your help, it is truly appreciated.
Date: Thu, 29 Oct 2009 18:52:38 -0600
From: [email protected]
To: [email protected]
Subject: Still need help with flash player download
You can set Flash Player to check for updates on the Global Settings Manager panel:
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
>

I had to put my computer by together without migration or time machine I NEED help with order of the files?

I had to put my computer by together without migration or time machine I NEED help with order of the files?

Hi, where are these other files exactly?

Need help with flash player installation please !!!!

Hello,
I need help with my flash player installation because every time I access a movie this is the message I receive.
This content on Xfinity TV is not available for viewing with Chrome's "Incognito" mode. To play this video using Chrome, please view this page without "Incognito" mode.
Still having problems? Try resetting your Flash player license.

Incognito mode is a Google Chrome setting when you open a new window (Cmd+Shift+N on a Mac Ctrl+Shift+N on Windows) It opens a "private" window with no cookies and no tracking. The problem with it is that when you disable cookies, your license files are not sent to the site (whetehr it's YouTube or xFinity or any other that uses license files for paid content) and it treats you as if you're a first time visitor. Paid videos won't play wihtout the cookies sending the license file info.
This isn't a Flash Player setting. It's in Chrome. I did some research and according to Google, "Incignito" mode is off by default, and can ONLY be activate by the keyboard shortcut. There IS a way to disable it from the registry http://dev.chromium.org/administrators/policy-list-3#IncognitoModeAvailability

Need help with flash player 9 on vista

i need help with vista flash player 9 on vista, i play this
game called neopets and it needs flash player to make some of it to
work and ive tried to dowload flash player 9 about 25 times and it
still doesnt work ive tried the 3 solutions on the suport center
this link
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401499&sliceId=1
and still nothing can someone help please

The player is out (they are up to version 9.0.16). Flash
itself (the development tool) is in alpha and pretty buggy.
Ernie

Need help with FLV type SWF playback in flash movie

Hi,
I have three external SWF files from a client without FLA
sources. The SWFs were done 3 years ago by someone else so there is
no way to modify the existing SWF files. These contain no
interactivity but may involve nested clips on the main timeline.
They are AS1 or AS2 files so they need to be done with AS2
scripting to keep it simple.
I need to call these SWF files inside another flash movie and
play them in a player window as if they were video files with
play/pause, seekbar and volume controls. The needed functionality
is similar to FLV players. My controls will use custom graphic
buttons and sliders mimicking the look of CNN video player window.
Does anyone know a good tutorial on how to script these
controls for SWF?
Most likely I think I will load it in a clip and I am
thinking that I will need to get the duration of the loaded swf in
order to set up the seekbar.
Thanks in advance,
Attila

I think your professor, or somebody, gave you directions with ActionScript 2 programming. In AS2, what oyu have here would have worked just fine. But, in AS3, you need to use a fairly different approach. Your buttons, and their instance name, can remain the same. But now, in AS3, you have to add event listeners in the following manner:
yourButtonName.addEventListener(MouseEvent.CLICK, yourListenerFunction);
In your case, you can do one of two things - A) assign a unique listener function to each button, or B) assign the same listsner to both functions:
A)
start_btn.addEventListener(MouseEvent.CLICK, startPolygon);
stop_btn.addEventListener(MouseEvent.CLICK, stopPolygon);
function startPolygon(e:MouseEvent):void{
    polygon.play();
function stopPolygon(e:MouseEvent):void{
    polygon.stop();
B)
start_btn.addEventListener(MouseEvent.CLICK, controlPolygon);
stop_btn.addEventListener(MouseEvent.CLICK, controlPolygon);
function controlPolygon(e:MouseEvent):void{
   if (e.target.name == "start_btn") {//Test for the name of the object that dispatched the CLICK event
      polygon.play();
   } else if (e.target.name == "stop_btn") {
      polygon.stop();
When I'm using several buttons that do the same/nearly similar things, I favor approach B over A, as it keeps me to jsut one single function to deal with.

Need help with ext. SWF and XML

I'm trying to create an External SWF to load into my main
site (photography).
Home | Portfolio | Published Work | Bio | Contact
The SWF I want to load externally is Portfolio because it has
5 sections
Those 5 sections are:
-Editorial
-Adventure
-Fly Fishing
-Multimedia
-Weddings
I'm looking to keep this dynamic as possible, but I'm one of
those guys who doesn't write code from scratch, but knows AS well
enough to modify a base or a generic template if ever given. It
would be easier to use one subsection as an example, which could be
applied to all others.
e.g. "Fly Fishing" 1-Main container; 5-10 thumbnails (1
dyanamic thumbnailcontainer)
- I don't know XML (but can modify it). basically having an
ID tag for each image, possibly dynamically generate a thumbnail
too. Also have a spot for dynamic text to load in (captions with
multiple text lines for images upon onRelease - maybe this could be
it's own MC that loads on top of the main photo container)
- on (release) on a thumbnail: there would be a little
information icon that would appear. If you mouse over, it would
overlay a layer over that specific ID photo, and the text appear.
RollOut it would fade out the layer above that specific ID photo.
- Transition: FadeOut/Blur/Exposure Blur, something
interesting to that nature.
- Thumbnails: is it just easier to create thumbnail images
manually, and just create a separate container?
- Image folders: I would imagine each section would have
it's own watch folder. For example "Fly Fishing" would be a folder
"/swfImg_flyFishing/", but perhaps having one XML file.
- XML file details
id
location
caption summary
title
As you can see, if I had one template to build off of, I
could repeat it self for the others. I need help and if there is a
flash component (free or purchase) that does at least 70% of what I
need, please share information. thank you!Portfolio

I know doing a pushback to the client requires Flex Data
Services, but since I don't use FDS I can't tell you exactly how.
But look in the documentation about "pushing" data to the client.
Once you've figured out how to do that, you can trigger that push
once you've finished editing the xml file. You may want to ask over
in the FDS forum.

Need help with flash templates in Mac...

Hello, I did some searches in the forum but found nothing.
I have a problem. I have a Mac and and using Dreamweaver CS5.5.
Recently I download some templates with flash from Hostgator.
The message I get is: "This page contains some SWF objects that may not work properly in the most recent versions of Internet Explorer. Dreamweaver cannot convert them to the new SWF markups. Please delete each of them a insert again"
Could you help me please?
Thanks,

Hello,
The support from HostGator.com told me this:
After reading about Adobe Dreamweaver and using the library SWF objects. This seems to be a fairly particular error with Adobe Dreamweaver CS4.
I have read three articles:
http://forums.adobe.com/message/2958378?tstart=0
http://www.dreamweaverclub.com/forum/showthread.php?t=33323
http://www.vbforums.com/showthread.php?t=579625
They all concur this error is completely ignorable in some way. If you include the object, and just ignore the message, your content will still upload to your site. This has to do with how adobe has changed the embedding of objects since previous versions.
However, what I can concur from all of this is that you need to simply just re-add the file to your site/library, or just ignore the error message and the embed code should work just fine.
I test a hostgator template with flash on their server, and works fine.
I want to know your opinion. T hanks for your help...

Need help with flash player update

I previously updated to adobe reader X. Later I got a popup saying that an updated version of adobe flash player was available, which I downloaded. I am running windows 7 home premium (64 bit). After updating the flash player I keep getting a pop up that says there was an error in the down load and that I need the 64 bit version. Today I up dated to Adobe reader X version 10.1.3. What do I need to do to make the flash player correct? Adobe reader and PDF files are all working fine.

You need to post in one of the sub-forums (Installing, Using), but I will move this post over.
Try downloading the offline installer from http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
[topic moved to Flash Player forum]

Need help with Flash Player

I have been having problems with this for months and still no help. PLEASE HELP.
I am using Windows Vista and firefox is my Browser. When I go to download it instead of Run File it only gives me a option to Save or Cancel File. When I load flash objects, it gives me a greyed out box that says Movie Not Loaded and Adobe Flash Player. If you have had any help with this please don't hesitate to help. I am trying all suggestions until I get this fixed.
Thanks in Advance

I am having the exact same issue! I have tried everything,
including the link
http://www.adobe.com/go/full_flashplayer_win_msi,
I still get the message that I must download flash. The weird thing
is, one of the 5 user accounts (all computer administrators)
on our family pc has no problem with flash working, but the
other 4 do not work. I have tried adjusting the security settings,
but nothing has worked. Did anything end up working out for
you?

Need help with loading child .swf into parent .swf

Hello,
I am having trouble with an external .swf that isbeing loaded
into the master.swf. All of the files loads perfectly. However the
.swf that has the contact form movieclip in it will not work. The
combobox does that display any of the items listed and the form is
not being sent to the server. Can anyone give me a hand with
this?

can you post your code

Need help with Flash media server

I am using XAMPP. Now i want to intall Flash media server. How can i configure my apache server to work with flash media server? I dont want to install the apache server coming along with flash media

Hi,
What excactly is the usecase you are trying here? Are using your external Apache to proxy your http traffic from FMS to it or do you want to use http streaming feature of FMS?
If you want to proxy it then use the following document : http://help.adobe.com/en_US/FlashMediaServer/3.5_AdminGuide/WSE2A5A7B9-E118-496f-92F9-E295 038DB7DB.html
Refer Configure HTTP proxying topic in the document.

Need help with flash player install

I am having trouble installing Adobe Flash Player on my hp notebook. It keeps saying it can't initialize once it hits 50%. Any ideas?

What is your operating system? If Windows, download the offline installer from http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
[topic moved to Flash Player forum]

Need help with Flash CS6 swf files

Similar Messages

Maybe you are looking for