Need help with importing flash/swf into fireworks???? Is it possible???
Hi, Is it possible to import a flash/swf file in to
fireworks... If so... how..????
Thank You for Your Help...
can you post your code
Similar Messages
-
Need help with loading child .swf into parent .swf
Hello,
I am having trouble with an external .swf that isbeing loaded
into the master.swf. All of the files loads perfectly. However the
.swf that has the contact form movieclip in it will not work. The
combobox does that display any of the items listed and the form is
not being sent to the server. Can anyone give me a hand with
this?can you post your code
-
I need help with controlling two .swf's from third.
Hi, thanks for reading!
I need help with controlling two .swf's from third.
I have a problem where I need to use a corporate designed
.swf in a digital signage solution, but have been told by the legal
department that it can not be modified in any way, I also can't
have the source file yada yada. I pulled the .swfs from their
website and I decompiled them to see what I was up against.
The main swf that I need to control is HCIC.swf and the
problem is it starts w/ a preloader, which after loading stops on a
frame that requires user input (button press) on a play button,
before the movie will proceed and play through.
What I have done so far is to create a container swf,
HCIC_container.swf that will act as Target for the HCIC.swf, and
allow me to send actionscript to the file I'm not allowed to
modify.
I managed to get that done with the help of someone on
another forum. It was my hope that the following script would just
start HCIC.swf at a frame past the preloader and play button, and
just play through.
var container:MovieClip = createEmptyMovieClip("container",
getNextHighestDepth());
var mcLoader:MovieClipLoader = new MovieClipLoader();
mcLoader.addListener(this);
mcLoader.loadClip("MCIC.swf", container);
function onLoadInit(mc:MovieClip) {
mc.gotoAndPlay(14);
But unfortunately it didn't solve my problem. Because there
is a media-controller.swf, that is being loaded by HCIC.swf that
has the controls including the play button to start HCIC.swf.
Here's a link to a .zip file with all 3 .swf files, and all 3
.fla files.
http://www.axiscc.com/temp/HCIC.zip
What I need to do is automatically start the HCIC.swf file
bypassing the pre-loader and play button without editing it or the
media-controller.swf in anyway. So all the scripting needs to be
done in HCIC_container.swf.
I know this is confusing, and its difficult to explain, but
if you look at the files it should make sense.
ActionScripting is far from my strong point, so I'm
definitely over my head here.
Thanks for your help.Got my solution on another forum.
http://www.actionscript.org/forums/showthread.php3?t=146827 -
Need Help with a Flash Web Project
Hello, everyone. I am trying to use Flash to make a two-step
system. I want the flash document to, first, allow a person to
upload multiple image files and then, second, for the flash
document be able to create a slideshow with the uploaded images and
fade in and out from each image until the slideshow is over. I want
it to be where the flash document creates its own slideshow with
the images that are uploaded in the first step that I mentioned. I
want it to do it completely on its own so I need to know how to
give it the proper AI so that it can do this task.
So, are there any tips that anyone has on how to do this? Can
anyone tell me exactly how to do this? I really need help with this
for my new website project. Thanks in advance, everyone!The problem with the text not appearing at all has to do with you setting the alpha of the movieclip to 0%. Not within the movieclip, but the movieclip itself. The same for the xray graphic, except you have that as a graphic symbol rather than a movieclip. To have that play while inhabiting one frame you'll need to change it to a movieclip symbol.
To get the text to play after the blinds (just a minor critique, I'd speed up the blinds), you will want to add some code in the frame where you added the stop in the blinds animation. You will also need to assign instance names for the text movieclips in the properties panel, as well as place a stop(); in their first frames (inside).
Let's say you name them upperText and lowerText. Then the code you'd add at the end of the blinds animation (in the stop frame) would be...
_parent.upperText.play();
_parent.lowerText.play();
The "_parent" portion of that is used to target the timeline that is containing the item making the command, basically meaning it's the guy inside the blinds telling the guy outside the blinds to do something.
You'll probably want to add stops to the ends of the text animations as well.
If you want to have the first text trigger the second text, then you'd take that second line above and place it in the last frame of the first text animation instead of the blinds animation.
Note, on occasion, undeterminably, that code above doesn't work for some odd reason... the animation plays to the next frame and stops... so if you run into that, just put a play(); in the second frame to help push it along.
PS GotoandPlay would actually be gotoAndPlay, and for the code above you could substitute play(); with gotoAndPlay(2); -
Need help with ext. SWF and XML
I'm trying to create an External SWF to load into my main
site (photography).
Home | Portfolio | Published Work | Bio | Contact
The SWF I want to load externally is Portfolio because it has
5 sections
Those 5 sections are:
-Editorial
-Adventure
-Fly Fishing
-Multimedia
-Weddings
I'm looking to keep this dynamic as possible, but I'm one of
those guys who doesn't write code from scratch, but knows AS well
enough to modify a base or a generic template if ever given. It
would be easier to use one subsection as an example, which could be
applied to all others.
e.g. "Fly Fishing" 1-Main container; 5-10 thumbnails (1
dyanamic thumbnailcontainer)
- I don't know XML (but can modify it). basically having an
ID tag for each image, possibly dynamically generate a thumbnail
too. Also have a spot for dynamic text to load in (captions with
multiple text lines for images upon onRelease - maybe this could be
it's own MC that loads on top of the main photo container)
- on (release) on a thumbnail: there would be a little
information icon that would appear. If you mouse over, it would
overlay a layer over that specific ID photo, and the text appear.
RollOut it would fade out the layer above that specific ID photo.
- Transition: FadeOut/Blur/Exposure Blur, something
interesting to that nature.
- Thumbnails: is it just easier to create thumbnail images
manually, and just create a separate container?
- Image folders: I would imagine each section would have
it's own watch folder. For example "Fly Fishing" would be a folder
"/swfImg_flyFishing/", but perhaps having one XML file.
- XML file details
id
location
caption summary
title
As you can see, if I had one template to build off of, I
could repeat it self for the others. I need help and if there is a
flash component (free or purchase) that does at least 70% of what I
need, please share information. thank you!PortfolioI know doing a pushback to the client requires Flex Data
Services, but since I don't use FDS I can't tell you exactly how.
But look in the documentation about "pushing" data to the client.
Once you've figured out how to do that, you can trigger that push
once you've finished editing the xml file. You may want to ask over
in the FDS forum. -
Need help with turning multiple rows into a single row
Hello.
I've come across a situation that is somewhat beyond my knowledge base. I could use a little help with figuring this out.
My situation:
I am attempting to do some reporting from a JIRA database. What I am doing is getting the dates and times for specific step points of a ticket. This is resulting in many rows per ticket. What I need to do is return one row per ticket with a calculation of time between each step. But one issue is that if a ticket is re-opened, I want to ignore all data beyond the first close date. Also, not all tickets are in a closed state. I am attaching code and a sample list of the results. If I am not quite clear, please ask for information and I will attempt to provide more. The database is 10.2.0.4
select jiraissue.id, pkey, reporter, summary
,changegroup.created change_dt
,dbms_lob.substr(changeitem.newstring,15,1) change_type
,row_number() OVER ( PARTITION BY jiraissue.id ORDER BY changegroup.created ASC ) AS order_row
from jiraissue
,changeitem, changegroup
,(select * from customfieldvalue where customfield = 10591 and stringvalue = 'Support') phaseinfo
where jiraissue.project = 10110
and jiraissue.issuetype = 51
and dbms_lob.substr(changeitem.newstring,15,1) in ('Blocked','Closed','Testing','Open')
and phaseinfo.issue = jiraissue.id
and changeitem.groupid = changegroup.id
and changegroup.issueid = jiraissue.id
order by jiraissue.id,change_dt
Results:
1 21191 QCS-91 Error running the Earliest-deadlines flight interface request/response message 2008-07-16 9:30:38 AM Open 1
2 21191 QCS-91 Error running the Earliest-deadlines flight interface request/response message 2008-07-16 11:37:02 AM Testing 2
3 21191 QCS-91 Error running the Earliest-deadlines flight interface request/response message 2010-06-08 9:14:52 AM Closed 3
4 21191 QCS-91 Error running the Earliest-deadlines flight interface request/response message 2010-09-02 11:29:37 AM Open 4
5 21191 QCS-91 Error running the Earliest-deadlines flight interface request/response message 2010-09-02 11:29:42 AM Open 5
6 21191 QCS-91 Error running the Earliest-deadlines flight interface request/response message 2010-09-02 11:29:50 AM Testing 6
7 21191 QCS-91 Error running the Earliest-deadlines flight interface request/response message 2010-09-02 11:29:53 AM Closed 7
8 23234 QCS-208 System Baseline - OK button does not show up in the Defer Faults page for the System Engineer role 2008-10-03 10:26:21 AM Open 1
9 23234 QCS-208 System Baseline - OK button does not show up in the Defer Faults page for the System Engineer role 2008-11-17 9:39:39 AM Testing 2
10 23234 QCS-208 System Baseline - OK button does not show up in the Defer Faults page for the System Engineer role 2011-02-02 6:18:02 AM Closed 3
11 23977 QCS-311 Tally Sheet - Reason Not Done fails to provide reason for unassigned tasks 2008-09-29 2:44:54 PM Open 1
12 23977 QCS-311 Tally Sheet - Reason Not Done fails to provide reason for unassigned tasks 2010-05-29 4:47:37 PM Blocked 2
13 23977 QCS-311 Tally Sheet - Reason Not Done fails to provide reason for unassigned tasks 2011-02-02 6:14:57 AM Open 3
14 23977 QCS-311 Tally Sheet - Reason Not Done fails to provide reason for unassigned tasks 2011-02-02 6:15:32 AM Testing 4
15 23977 QCS-311 Tally Sheet - Reason Not Done fails to provide reason for unassigned tasks 2011-02-02 6:15:47 AM Closed 5Hi,
Welcome to the forum!
StblJmpr wrote:
... I am attempting to do some reporting from a JIRA database. What is a JIRA database?
I am attaching code and a sample list of the results. If I am not quite clear, please ask for information and I will attempt to provide more. Whenever you have a question, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and the results you want from that data.
Simplify the problem as much as possible. For example, if the part you don't know how to do only involves 2 tables, then jsut post a question involving those 2 tables. So you might just post this much data:
CREATE TABLE changegroup
( issueid NUMBER
, created DATE
, id NUMBER
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2008-07-16 09:30:38 AM', 'YYYY-MM-DD HH:MI:SS AM'), 10);
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2008-07-16 11:37:02 AM', 'YYYY-MM-DD HH:MI:SS AM'), 20);
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2010-06-08 09:14:52 AM', 'YYYY-MM-DD HH:MI:SS AM'), 90);
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2010-09-02 11:29:37 AM', 'YYYY-MM-DD HH:MI:SS AM'), 10);
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2010-09-02 11:29:42 AM', 'YYYY-MM-DD HH:MI:SS AM'), 10);
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2010-09-02 11:29:50 AM', 'YYYY-MM-DD HH:MI:SS AM'), 20);
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2010-09-02 11:29:53 AM', 'YYYY-MM-DD HH:MI:SS AM'), 90);
INSERT INTO changegroup (issueid, created, id) VALUES (23234, TO_DATE ('2008-10-03 10:26:21 AM', 'YYYY-MM-DD HH:MI:SS AM'), 10);
INSERT INTO changegroup (issueid, created, id) VALUES (23234, TO_DATE ('2008-11-17 09:39:39 AM', 'YYYY-MM-DD HH:MI:SS AM'), 20);
INSERT INTO changegroup (issueid, created, id) VALUES (23234, TO_DATE ('2011-02-02 06:18:02 AM', 'YYYY-MM-DD HH:MI:SS AM'), 90);
INSERT INTO changegroup (issueid, created, id) VALUES (23977, TO_DATE ('2008-09-29 02:44:54 PM', 'YYYY-MM-DD HH:MI:SS AM'), 10);
INSERT INTO changegroup (issueid, created, id) VALUES (23977, TO_DATE ('2010-05-29 04:47:37 PM', 'YYYY-MM-DD HH:MI:SS AM'), 30);
INSERT INTO changegroup (issueid, created, id) VALUES (23977, TO_DATE ('2011-02-02 06:14:57 AM', 'YYYY-MM-DD HH:MI:SS AM'), 10);
INSERT INTO changegroup (issueid, created, id) VALUES (23977, TO_DATE ('2011-02-02 06:15:32 AM', 'YYYY-MM-DD HH:MI:SS AM'), 20);
INSERT INTO changegroup (issueid, created, id) VALUES (23977, TO_DATE ('2011-02-02 06:15:47 AM', 'YYYY-MM-DD HH:MI:SS AM'), 90);
CREATE TABLE changeitem
( groupid NUMBER
, newstring VARCHAR2 (10)
INSERT INTO changeitem (groupid, newstring) VALUES (10, 'Open');
INSERT INTO changeitem (groupid, newstring) VALUES (20, 'Testing');
INSERT INTO changeitem (groupid, newstring) VALUES (30, 'Blocked');
INSERT INTO changeitem (groupid, newstring) VALUES (90, 'Closed');Then post the results you want to get from that data, like this:
ISSUEID HISTORY
21191 Open (0) >> Testing (692) >> Closed
23234 Open (45) >> Testing (807) >> Closed
23977 Open (607) >> Blocked (249) >> Open (0) >> Testing (0) >> ClosedExplain how you get those results from that data. For example:
"The output contains one row per issueid. The HISTORY coloumn shows the different states that the issue went through, in order by created, starting with the earliest one and continuing up until the first 'Closed' state, if there is one. Take the first row, issueid=21191, for example. It started as 'Open' on July 16, 2008, then, on the same day (that is, 0 days later) changed to 'Testing', and then, on June 8, 2010, (692 days later), it became 'Closed'. That same issue opened again later, on September 2, 2010, but I don't want to see any activity after the first 'Closed'."
The database is 10.2.0.4That's very important. Always post your version, like you did.
Here's one way to get those results from that data:
WITH got_order_row AS
SELECT cg.issueid
, LEAD (cg.created) OVER ( PARTITION BY cg.issueid
ORDER BY cg.created
- cg.created AS days_in_stage
, ROW_NUMBER () OVER ( PARTITION BY cg.issueid
ORDER BY cg.created
) AS order_row
, ci.newstring AS change_type
FROM changegroup cg
JOIN changeitem ci ON cg.id = ci.groupid
WHERE ci.newstring IN ( 'Blocked'
, 'Closed'
, 'Testing'
, 'Open'
-- AND ... -- any other filtering goes here
SELECT issueid
, SUBSTR ( SYS_CONNECT_BY_PATH ( change_type || CASE
WHEN CONNECT_BY_ISLEAF = 0
THEN ' ('
|| ROUND (days_in_stage)
|| ')'
END
, ' >> '
, 5
) AS history
FROM got_order_row
WHERE CONNECT_BY_ISLEAF = 1
START WITH order_row = 1
CONNECT BY order_row = PRIOR order_row + 1
AND issueid = PRIOR issueid
AND PRIOR change_type != 'Closed'
ORDER BY issueid
;Combining data from several rows into one big delimited VARCHAR2 column on one row is call String Aggregation .
I hope this answers your question, but I guessed at so many things, I won't be surprised if it doesn't. If that's the case, point out where this is wrong, post what the results should be in those places, and explain how you get those results. Post new data, if necessary. -
Need HELP with importing high definition tape
I am using Imovie 6HD - and trying to import a high definition tape from a CanonHV20. After importing the first tape I had a screen saying LETTERBOXING which went on for ever. I noticed it made black border tp/botom on the frames. I don't want that. What should I do - I have more tapes to import.
What settings do I need? As mentioned I used High Definition Tapes so I would like to have a high definition movie/dvd. Also after burning the dvd I suppose I can play that on any tv?? Please help with detail explanation!!
Thanks.teit wrote:
.. import a high definition tape from a CanonHV20. .. a screen saying LETTERBOXING ...
wrong setting on Import/New Project:
• select in New Project dialog 'HDV 1080i' or 'HDV720p' (=depends on your settings on your camcorder...)
... I would like to have a high definition .../dvd. ..
no such thing.. DVDs are allways 'Standard'-only.
• drag iM project file into iDVD = automatic conversion from HD>>SD .. -
Need help--cannot import hotel.dmp into chinese characterset server
I'm from china.Because my oracle8i use
chinese characterset, so I cannot import
this file into my oracle.
Has anybody can help me?
Thanks you very much!!I seem to recall that SQL*Loader was capable of doing these kinds of language translations for you. You needed to account for machine language, character set, and datatype all of which could be manipulated either via FTP parameters when a file was transferred (tell ftp not to convert between machine languages, tell sqlloader the machine language being used, tell it the character set, etc.) I found examples of this by scouring the internet for sqlloader examples, but unfortunately I no long have then handy.
Good luck.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by potian:
I'm from china.Because my oracle8i use
chinese characterset, so I cannot import
this file into my oracle.
Has anybody can help me?
Thanks you very much!!<HR></BLOCKQUOTE>
null -
Need help with adobe flash player 10.2 keeps crashing
ok i am having a problem with the adobe flash player ten it keeps crashing on firefox ie8 and google chrome
operating system is windows xp 32 bit
really need help because this has been going on for 3 weeks straight and i downloaded the adobe flash player from the adobe site
i have uninstalled it 3 time and reinstalled it 3 time
need help ASAP!!!!!!!!!!!!!!!!!Hello,
Please try the following way:
1.Open "Start", then in the "Start Search" bar input "regedit", then click "Enter"
2.In the opened "Registry Editor", find the key "HKEY_LOCAL_MACHINE -> SOFTWARE -> Macromedia -> FlashPlayer -> SafeVersions" and delete it.
3.Download the latest Flash Player from http://get.adobe.com/flashplayer/, and install it.
Thanks -
Need help with Installing Flash 9
First off, let me apologize if this is in the wrong forum, I couldn't really find a forum for my specific need.
I was running Flash 8 just fine, but then a video requested that I update to Flash 9, because that's the only way the video would play.
So I tried installing the PPC version, and right at the last file it needs to finish installing a window pops up saying "ERROR CREATING FILE, 1008:5,-5000 Access denied error."
Now all flash files won't work on my browser.Did you enable "root user" according to "Mac Help" or did you set up a new user in the system preferences? If you did it according to Mac Help, then Flash should have been installed correctly. Did you try the other option first? That option, if it worked, would have installed Flash into the current user. How many different users do you have?
Post back if you still need help, maybe someone else will pick up on this that is better than I am about such problems.
Sorry that I haven't been much help.
Larry -
Help with importing r3d files into premiere pro cs6
When I try to import these files into the media browser, a notification pops up saying the file is either damaged or unsupported. The file is not damaged however, and I need to be able to import these files into my project.
do you know the 'flavor' of .r3d?
red epic: imports fine
red dragon: can't import into cs6
if it's dragon, you will have to flip to a format cs6 likes
by using the free redcine-x
http://www.red.com/products/redcine-x
hahahahahahahahahaha!!! -
I need help with Adobe Flash Player, PLEASE!
I have been on multiple site trying to play games or watch videos (e.g. YouTube) and keep getting an error message saying I have to install Adobe Flash Player in order to play/view. I have done this multiple times and currently have Flash Player 11 ActiveX and Flash Player 11 Plugin. What more do I need to do because it still won't let me watch the video or play the games!
PLEASE HELP ME!
Additional info: I just wound up downloading Google Chrome (but don't like it) and don't have the same problem. So, it's only happening when I am trying to do all this on Internet Explorer 9.Flash Player Help | Installation problems | Flash Player | Windows
Mylenium -
Need help with adobe flash crashing my computer.
i use firefox is this a problem with adobe flash?
You might want to give some specifics. Other then my computer crashes with Adobe....Not to be a S.A but there are a lot of different Adobe programs and computers. You mention FF so Windows would be my guess, or you could be running Linux. Do you see the variables here? What kind of computer? Not a Desktop or Laptop or Dell or HP. Specs like GPU, CPU, Memory. Program running, what you were doing, etc. The more detailed you are the more a user can hop in and try and help you.
-
Help with Importing Excel Data into Formatted Tables
This is my first post, here, so please be gentle!
I am a relatively new user of InDesign CS4, and I am creating a 70-pg manufacturer's price book. A very large portion of each page is going to be size and price information imported from a large Excel spreadsheet.
I have created the table format that I'd like to use for each page, but the trouble comes when I import the Excel data into that table. For some reason, when I import, it all dumps into one cell. Would it be best to import as an unformatted table, and then format the table each time, or is there a way to simply import the data into my pre-formatted table? I've seen how the former is done, but the latter seems much easier (...although that could be my inexperience talking).
Any advice would be greatly appreciated!
Thanks so much,
Laura (V1500)Thank you both so much for your time! This is exactly what I needed.
Cheers
Laura -
I need help with Importing songs into Creative organizer please help!
OK now i have a bunch of music files in my documents that all have MPEG4 with the itunes music symbol next to them. My problem is when i try to add them to my Windows media player nothing happens also when i search for the files in the Creative Import Wizard nothing shows up! Do i first need to put all the music i want on my ZVM im Windows Media Player first then add it's or is it something else? do i need to get rid of itunes entirely and just have the music files in my documents? Im really really confused please help!!!!!! Also No tracks show up when i try to add them to Windows Media Player or Creative MediaSource5 even though when i know i put them there
P.S. What do u guys do ( I mean people with Zen Vison M's) Any know of any guides too? that would be great!Message Edited by Chrismic3 on 03-9-200705:54 PM
Message Edited by Chrismic3 on 03-9-200706:00 PMbump
Maybe you are looking for
-
I am moving my US iMac and macbook pro to Ireland. Where can I get the right power cords
I am moving to Ireland. I have several mac products. I have 2 iMac, and 3 laptops, plus all the other "fun" apple stuff. Apple TV, iPad, iPods, phones) I need to get a power supply for both the iMacs and MacBooks. Any suggestions, I can't seem to
-
How to add a hyperlink to javamail attachment?
Hi friends: I am writing a mail systems.I can receive email attachment using javamail API. But I don't know how to add a hyperlink to the attachment so when user click the hyperlink the file will be download to disc. I means that I want to add a hype
-
Profit center segment characteristics fileds activation.
Hi All Where we can activite (t.code or path) Profit center segment fields (charasteristics) while generation of Sales order.
-
I am currently designing a site where each page needs a printer friendly version. I thought about creating all the pages in a simple format using CSS and then linking a button from the complex page to the simple page. However, I have appeared on this
-
Can someone show me how to use sorted/tree set
i have a server program, and i want to create a sortedset, then everytime a client connects an element(nickname) is added to the sortedset.. i have to create a syncronized one i need to know how to add elements, and read elements one-by-one into a st