Need help with syncing error!

hey guys... kam here... every time i try to sync my iphone 4 up with itunes i get an error message saying unable to sync... i've updated all the dumb updates and all that crap but it still won't work... any ideas?

Hi Reynold,
Thanks for your response, the error is posting error. Can I change the document date even for the components of a production order inorder to process the COGI's. For example if an order is confirmed last month with missing parts, and if I adjust the stock for the components today, can I process the COGI'S by changing the document date as suggested by you.
Follow-up question.
When a Production order is confirmed the stock moves to quality, we have a hard stop here for certain meterials. The stock will show under quality in MMBE. Quality need to accept the results inorder to move the stock to unrestricted stock.
When this stock is in quality, for some reason if a user cancel the confirmation I see two errors in COGI with movement type 101 and 102 with error M7. I have following two questions.
If quality accepts the results the stock will move from quality to Unrestricted and the production order status is delivered DLV, can I delete the two COIG's with movement type 101 and 102?. We use PPIO_ENTRY to do a mass TECO, orders of these type are not being TECO'ed automatically and What is the impact on Costing.
If quality decline the results and the period is closed how can we clear the COGI's and how the cost will be settled.
I appreciate your help.
Thanks & Regards
Srini

Similar Messages

Installing Elements 11 on Mac. Need help with install error "Setup wants to make changes."

Installing Elements 11 on Mac 10.8.2. Need help with install error: Setup wants to make changes. Type your password to allow this." After entering Adobe password, nothing happens. Locked from further installation. Any ideas? Adobe phone support could not help.

Just before letting changes (installation in this case) be made on the system, Mac OS prompts for password & this has to be the Mac system password. This password prompt is the system's own native prompt & would accept the system password only. Please make sure it is the right system password (all/admin rights) and the installaion should run.

HT5622 I need help with sync my iphone 4 to my new pc

I just got a new pc and I can not remember how to sync my iphone to my pc to tranfer all my pictures and videos I need help!! I can not update my phone until I remove some of my content and I want it on my pc.

You can only Sync to One iTunes Library at a time.
tjmommy2813 wrote:
I just got a new pc
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
tjmommy2813 wrote:
...I can not remember how to sync my iphone to my pc ...
Make sure your new pc is Authorised
http://www.apple.com/support/itunes/authorization/
If you do not have access to the iTunes Library on your Old computer... or its Backup...
See these 2 Links...
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141

Need help with an Error

Hello, im using this class to query a table from my database. everything is ok, but when i write the closing } of the Main class the Program gives an error. In the main class ive wrote here at the bottom, the main class has no ending } . Now only the final } gives an error but everything else is ok, ive double checked all brackets, they are all in good place, what is going wrong?
package DBandQueryHandler;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Statement;
class Main {
    public static void main(String[] args){
        Class driver_class=null;
                try{
                    driver_class=Class.forName("com.mysql.jdbc.Driver");         }
                catch(ClassNotFoundException e){
                    e.printStackTrace();
                    return;
        System.out.println("Found Driver"+ driver_class);
        Connection connection=null;
        try{
            connection= DriverManager.getConnection("jdbc:mysql://localhost:3306/....", ".....", "........");
        catch(SQLException e){
            e.printStackTrace();
            return;
        try{
            System.out.println("Established connection to"+ connection.getMetaData().getURL());
        catch(SQLException e1){
            e1.printStackTrace();
        Statement statement=null;
        try{
            statement= connection.createStatement();
            statement.execute("SELECT * FROM KLANTEN");
            Resultset resset= statement.getResultSet();
            System.out.println("Row user_id, username, password, abbonement1, abbonement2, openstaand");
            while(resset.next()){
                System.out.println(resset.getRow());
                System.out.println("" + resset.getSring("user_id"));
                System.out.println("" + resset.getSring("username"));
                System.out.println("" + resset.getSring("password"));
                System.out.println("" + resset.getSring("abbonement1"));
                System.out.println("" + resset.getSring("abbonement2"));
                System.out.println("" + resset.getSring("openstaand"));
            resset.close();
        catch(SQLException e){
            e.printStackTrace();
        finally{
            if(statement=null){
                try{
                statement.close();
                catch(SQLException e){
            e.printStackTrace();
            if(connection=null){
                try{
                connection.close();
                catch(SQLException e){
            e.printStackTrace();
   }

javaboy2 wrote:
Like i said, when i write all brackets correctly, the program gives errors, but when i delete the the last bracket, the program doesnt give errors(except for the last bracket=> '}' expected). I dont understand this.
The errors of the program with correct amount of brackets are these: Yes, the errors come up with correct brackets because you have errors . When you take out the bracket, the structure is too bad so it doesn't look for the rest of the errors. This problem has absolutely nothing to do with brackets at all. That's why you needed to post the errors in your first post, rather than ignoring them and pretending your code is perfect and blaming it on brackets.
And these errors would be fixed if you read them.
Cannot find symbol ResultsetThat's because there is no class called Resultset. It's called ResultSet.
Your if statements are using assignment instead of equality
statement=null; //that assigns null to the statement object
statement==null; //that checks to see if statement equals nullAgain, read your errors. They don't lie.

Need help with resolving error

Hi,
I am working on an ADF aaplication Each time I hit the execute button on my application I get the following error message,
JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-35007: Row currency has changed since the user interface was rendered. The expected row key was null
JBO-35007: Row currency has changed since the user interface was rendered. The expected row key was null
Does anyone know why this come up? and what can I do to resolve this issue?
Be very grateful to get a response soon.

The page is suppose to be a search page, you could key in all the information in all the fields, but not mandatory. when I run the seach and key the info, then hit execute, the first time it runs very fine, but if want to make a second search it come up with the error.
I hope with this I could get some help.
Thank you very much

Need help with download error on windows 8 computer.

I have a windows 8 computer, and I have been trying to download Itunes to my computer but am getting an error that apple support was not included or that apple application support software was not found to uninstall and try again same thing several more times.

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Need help with an error message: Can't repair volume.

Hi, folks.
While checking my HD with Disk Utility, I found a message error. It says that I have to repair the disk but the button "Repair Disk" is not available.
The message is copied below... if anyone can read it and help me, I'd appreciate.
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Overlapped extent allocation (file 1022303 /Applications/Macromedia Dreamweaver MX 2004/Dreamweaver MX 2004/Contents/MacOS/Dreamweaver)
Overlapped extent allocation (file 1034457 /Users/Johnny/Library/Mail/[email protected]/INBOX.mbox/Messages/16 143.emlx)
Overlapped extent allocation (file 1034472 /Users/Johnny/Library/Caches/Mail/11/05/1521797044-3222719574.cache)
Overlapped extent allocation (file 1035396 /Users/Johnny/Library/Mail/[email protected]/Junk E-Mail.mbox/Messages/16148.emlx)
Overlapped extent allocation (file 1035401 /Users/Johnny/Library/Mail/[email protected]/Junk E-Mail.mbox/Messages/16149.emlx)
Overlapped extent allocation (file Overlapped extent allocation (file s/DisplayPictures/[email protected]/VnRhV1J0dXR3eG41aG04T3UxOXIrU lZWZ3AwPQ==.png)
Overlapped extent allocation (file 1042618 /Users/Johnny/Mercury/MSN/Resources/DisplayPictures/[email protected]/ R3FDbDlPNllTRGhhUmNXd3p2Sm55clQ0aUx3PQ==.png)
Overlapped extent allocation (file 1049904 /Users/Johnny/Library/Mail/[email protected]/Sent Messages.mbox/Messages/16257.emlx)
Overlapped extent allocation (file Overlapped extent allocation (file ail/02/12/4236346157-3219157957.cache)
Overlapped extent allocation (file 1050553 /Users/Johnny/Library/Mail/[email protected]/Drafts.mbox/Messages/1 6261.emlx)
Overlapped extent allocation (file 1050558 /Users/Johnny/Library/Mail/[email protected]/Drafts.mbox/Messages/1 6262.emlx)
Overlapped extent allocation (file 1050573 /Users/Johnny/Library/Mail/[email protected]/Drafts.mbox/Messages/1 6263.emlx)
1050573 /Users/Johnny/Library/Mail/[email protected]/Drafts.mbox/Messages/1 6263.emlx
@)",1)
1054976 /Users/Johnny/Mercury/MSN/Resources/CustomEmoticons/patinhodeborracha22@hotmail .com/NUxYOXd5ZkZiRjR0Wm5Ob3NZY0p6K09oWWFnPQ==.gif
Overlapped extent allocation (file 1055000 /Users/Johnny/Mercury/MSN/Resources/DisplayPictures/patinhodeborracha22@hotmail .com/TzNFcmEzTWxaMmV4L0NOelVEUllsaEJjd1BRPQ==.png)
Overlapped extent allocation (file 1057743 /Users/Johnny/Library/Mail/[email protected]@[email protected]/Sent Messages.mbox/Messages/16313.emlx)
1057743 /Users/Johnny/Library/Mail/[email protected]@[email protected]/Sent Messages.mbox/Messages/16313.emlx
t allocation (file %@)",1)
1057789 /Users/Johnny/Documents/Yazigi/Events/OFICIO_SDUMA.doc
Overlapped extent allocation (file 1057880 /Applications/Microsoft Office 2004/Clipart/Yázigi)
Overlapped extent allocation (file 1058044 /Users/Johnny/Library/Caches/Mail/04/11/2078440011-2247275449.cache)
Overlapped extent allocation (file 1058045 /Users/Johnny/Library/Caches/Mail/10/07/0272707744-3809369458.cache)
Overlapped extent allocation (file Overlapped extent allocation (file ny/Library/Caches/Mail/00/15/2244060425-1075118591.cache)
Overlapped extent allocation (file 1058051 /Users/Johnny/Library/Caches/Mail/09/11/0695285650-1820972980.cache)
Overlapped extent allocation (file 1058052 /Users/Johnny/Library/Caches/Mail/00/11/0589583874-0597952182.cache)
Overlapped extent allocation (file 1058053 /Users/Johnny/Library/Caches/Mail/05/12/0478257501-4274710467.cache)
Overlapped extent allocation (file Overlapped extent allocation (file Mail/00/01/0993945094-0587616530.cache)
Overlapped extent allocation (file 1058055 /Users/Johnny/Library/Caches/Mail/00/05/0791764484-0602406228.cache)
Overlapped extent allocation (file 1058056 /Users/Johnny/Library/Caches/Mail/00/15/1220797701-0859034105.cache)
Overlapped extent allocation (file 1058057 /Users/Johnny/Library/Caches/Mail/00/07/1625158921-0865946749.cache)
Overlapped extent allocation (file Overlapped extent allocation (file 179-0596073421.cache)
Overlapped extent allocation (file 1058060 /Users/Johnny/Library/Caches/Mail/00/11/1196125704-0590536112.cache)
Overlapped extent allocation (file 1058062 /Users/Johnny/Library/Caches/Mail/00/11/1422978311-0856115643.cache)
Overlapped extent allocation (file 1058063 /Users/Johnny/Library/Caches/Mail/04/12/2763023681-0835402695.cache)
Overlapped extent allocation (file Overlapped extent allocation (file he)
Overlapped extent allocation (file 1058065 /Users/Johnny/Library/Caches/Mail/00/03/1827339531-0863388223.cache)
Overlapped extent allocation (file 1058066 /Users/Johnny/Library/Caches/Mail/07/03/3539577467-0911802683.cache)
Overlapped extent allocation (file 1058067 /Users/Johnny/Library/Caches/Mail/00/04/1321888006-0860911682.cache)
Overlapped extent allocation (file 1058069 /Users/Johnny/Library/Caches/Mail/00/02/1726249226-0867834918.cache)
1058069 /Users/Johnny/Library/Caches/Mail/00/02/1726249226-0867834918.cache
extent allocation (file %@)",1)
1058070 /Users/Johnny/Library/Caches/Mail/05/01/0121999446-2569076246.cache
Overlapped extent allocation (file 1058071 /Users/Johnny/Library/Caches/Mail/12/14/3415372742-4138529506.cache)
Overlapped extent allocation (file 1058076 /Users/Johnny/Library/Application Support/Skype/joaopaulo_yazigi/chatsync/19/19e520537f725be8.dat)
Overlapped extent allocation (file Overlapped extent allocation (file nc/d5/d5f85bf4508148d5.dat)
Overlapped extent allocation (file 1074308 /Users/Johnny/Library/Caches/com.apple.AddressBook/MetaData/2A56AA5D-FD59-4B78- BF65-25589E601017/ABPerson.abcdp)
Overlapped extent allocation (file 1083386 /Users/Johnny/Music/iTunes/iTunes Music/Podcasts/NEWSWEEK On Air Podcast/NEWSWEEK On Air 1092005.mp3)
Overlapped extent allocation (file Overlapped extent allocation (file XlSOE96L2VJPQ==.png)
Overlapped extent allocation (file 1094018 /Users/Johnny/Library/Application Support/Skype/joaopaulo_yazigi/chatsync/15/150fcbaa76a7fb93.dat)
Overlapped extent allocation (file 1120553 /Users/Johnny/Documents/Yazigi/Events/PRELISTAECOLOCICA2005.doc)
Overlapped extent allocation (file 1182160 /Users/Johnny/Library/Mail/[email protected]@[email protected]/Sent Messages.mbox/Messages/17264.emlx)
Overlapped extent allocation (file Overlapped extent allocation (file /Users/Johnny/Library/Mail/[email protected]@[email protected]/Sent Messages.mbox/Messages/17267.emlx)
Overlapped extent allocation (file 1182217 /Users/Johnny/Library/Mail/[email protected]@[email protected]/Sent Messages.mbox/Messages/17269.emlx)
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Volume Bit Map needs minor repair_
Checking volume information.
Invalid volume free block count_
(It should be 3677631 instead of 3677630)
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
Thanks in advance.
JP

You will need to try and repair the drive with Disk Warrior. Otherwise, the only option is to reformat the drive. Note that DW may not be successful in fixing all the errors, and you may end up having to reformat anyway.
It may be possible to fix the problem manually, but it's quite involved. Here's the info:
http://docs.info.apple.com/article.html?artnum=25770
Manually fix Overlapped Extent Allocation Errors without Disk Warrior
Overlapped overlapped extent allocation errors can be the bane of any Mac user's existence. Often, these errors go unnoticed until the problem becomes visible: your Mac might refuse to boot, crash unexpected, or worse, critical data might disappear from the Finder. Disk Utility can detect, but not fix overlapped extent allocation errors, and certain third-party utilities, such as Alsoft Diskwarrior, can fix them, but generally without reporting the consequences.
Overlapped extent allocation error occur when the file system thinks that two files are occupying the same area on the hard disk, hence overlapping on the same "inode," which is the structure which holds the location of the data blocks the file occupies, and also file permissions and flags.
Clearing the "overlapped" or "overallocated" extent allocation essentially means that you'll have to lose some data, because the only way to remove the overlap is to delete the file that's occupying the inode. So, if you suspect, or find out, that the guilty file is a critical system file that resides in one of the hidden system directories such as /etc /var /usr/ or visible system directories such as /System or /Library, and you don't want to reinstall the whole OS (which might not fix the overlapped extent allocation anyway), it's good to have another disk available to copy the files back to your original disk if necessary: a second bootable hard drive or a firewire drive connected to your Mac when you remove the misbehaving file. Just make sure that when you copy the file back to your boot disk that the permissions are correct, so it's best to use the "ditto" command, so that all sticky bits, flags, and permissions are preserved.
In case you didn't know, you don't have to boot from an install CD in order to check for overlapped extent allocations. All you need to do is restart your Mac, while holding down command + S to boot in "single-user mode."
At the command prompt that appears, type:
$ fsck -fy
If you have an overlapped extent allocation, you'll see:
"Overlapped Extent Allocation" (File 123456d)
No matter how many times you run fsck -fy, you'll never be rid of the error.
So, simply issue the following command:
find / -inum 123456 -print
Note the "d" was dropped, or any extra letter that appears after the inode number.
The find will return a file name that matches with the inode number, and the path to that file. If you remove the file then the fsck will not return this error next time you run it.
However, before you can delete the file(s) in single-user mode, you'll need to mount the file system. Type:
$ mount -uw /
When done, issue the "sync" command, and that will flush the write cache so that all pending writes are written from memory to the disk. Also, since most OS X 10.3 Macs use the HFS+ Journaled file system, it might be a good idea to disable the journal before booting into single-user mode by typing:
$ sudo diskutil disableJournal /
then re-enable it when done fixing the overlapped extents and rebooting normally:
$ sudo diskutil enableJournal /
Chris Anderson is a long-time Linux propellerhead who just got his first Mac, an ibook G4, and can't keep his hands off of it. He currently works as a "The Architect" and general visionary for a maker of world-class collectibles.

Help! Intalled i tunes and need help with syncing

I have successfully installed iTunes on my compaq cpu (windows xp) and have purchased a couple of audio books. However, when I plug in my Sony MP3 playing to my CPU via the USB cord. My MP3 player icon does not show up on my items tool bar so I am unable to sync it. How do I create the connection between my MP3 player and itunes?
Hope I am making sense! any help would be appreciated..
FP

iTunes for Windows is only compatible with the iPod/iPhone range and the iTunes enabled phones from Motorola. You may be able to get your player working with the aid of a third party helper program. Have a look at this one and see what you think: iTunes Agent -Windows
If your player supports drag and drop through Windows Explorer you can drag tracks from the iTunes Music folder rather than through the iTunes interface. Also remember that many players will not work with AAC (MP4) format at present so if you imported anything from CD into iTunes using the AAc encoder then they will need to be converted to MP3: How to convert a song to a different format

I need help with syncing

Hello, I recently downloaded Itunes on my computer for back up reasons. when it finished downloading I had to log off on my user and went on a different one on the same computer. I synced my Ipod touch on this user cuz I thought it would be synced on the entire computer (as you can tell Im not good with computers) then the next day I loged on to MY user on the same computer and went on Itunes but it said it was synced with a different library and I knew if you sync to a different one all your songs will be deleted and I cant do that because I purchased ALL the songs on there. So if there is a simple way to explain it to me that would be great but I was wondering if I transferre my purchases on to the library I want it on then erase and sync will that work or will the songs that I transfered still be erased PLEASE HELP I NEED TO KNOW AND I HAVE BENN LOOKING NON STOP FOR 2 WEEKS STRAIGHT (I know thats not alot but I really need to know what to do)
Please and thank you

One way to do it, is to go into my computerand open your iPod so that you can see hidden files and folders, and then to select all songs and just simply drag them to the iTunes library.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music and playlists etc from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
There is also CopyPod. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer.

Need help with Sync/Async BPM Scenario

I have an R/3 RFC -> XI -> HTTP (to vendor A) scenario that is working fine. It is a totally synchronous call event. The Integration Directory pieces sit in a scenario named HotkeyOutbound.
Now I need to create a process for RFC -> XI -> HTTP (to vendor Panduit). The R/3 RFC is the same sender, but vendor Panduit only supports an asynchronous HTTP connection. I followed the Sriram Vasudevan weblog on Sync/Async Bridge and created my BPM. I am stuck on trying to determine what to set up in the Integration Directory.
First off, should I be able to use the same HotkeyOutbound scenario as with vendor A so all hotkey stuff can stay together? Or do I have to create a new scenario with a copy of the R/3 business system for the sender? I moved forward with a new scenario (PanduitHotkeyOutbound).
I also need to know how many config Agreements and Determinations to use. The image at http://webpages.charter.net/kpwendel/keith1.html shows what I have so far. Which are not needed? What is missing?
And I tried setting up an HTTP communication channel for outbound async to vendor Panduit and another for inbound async from vendor Panduit. XI won't let me set up a sender HTTP channel. Why not?
Thank you in advance.

I have yet to figure this out, and probably need to go back to my Integration Repository setup since my problems may start there. This screenshot shows my Repository objects.
http://webpages.charter.net/kpwendel/intProcess.jpg
HELP! These are the steps I took, with questions embedded.
(1) Created data type and message type for xml document (note that same format is used for request and reply).
(2) Created PANRequestAbstractInterfaceSync (abstract and sync) for first part of Integration Process. Should the input message be the RFC or XML message type?
(3) Created PANRequestAbstractInterfaceAsync (abstract and async) for 2nd part of Integration Process.
(4) Created PANResponseToBPM_MessageInterface (outbound async) for interface back into XI from partner. Is this needed?
(5) Created PANHotkeySync_to_Async_IntProc Integration Process to handle sync to async bridge.
- Wondering why PANRequestAbstractInterfaceAsync is the only message interface available when I make container object (PANMessage)?
(6) Created two Message Mappings to handle RFC data to XML mappings (outbound RFC-> XML and inbound XML -> RFC).
(7) Created Interface Mapping that includes both the Request and Response message mapping programs from step six. Source is the RFC and Target is PANRequestAbstractInterfaceSync.
- Do I need another interface mapping with Source being PANRequestAbstractInterfaceAsync and Target being the RFC?
Link to these steps and app diagram:
http://webpages.charter.net/kpwendel/PAN_Hotkey_Diagram.jpg
Thank you very much for your time.

Need help with an error message when making changes to an IMAP account

I have several IMAP accounts in my Mac Mail. Today when I tried to edit the, "Full Name" associated with the account I got an error message that said:
Invalid Directory
The account path /Users/kristen/Library/Mail/[email protected]@host365.ISPhost.com is already being used by the account "Silver"
Did I somehow corrupt something? I'm not sure why making this small change to the full name would cause such an error. Please help.
Thanks!!

stop() forcibly kills a thread. You shouldn't use this method because if the thread is in a critical section of code, you can cause data corruption or deadlock.
Instead, if you need to stop execution from another thread, invoke the interrupt() method.
Good luck.

I NEED HELP WITH SYNC PROBLEM!

I have already posted about this once and got no help! I can not afford Apple's greedy fee for helping us with a product we paid a lot for
My iPad will not sync with iTunes anymore!
The error I get is: The iPad "Jonnathon's iPad" cannot be synced. An error occurred while reading from the device.
Sometimes the error is different saying it cant find a required disk.
It always occurs just after downloading apps that had been purchased or updated since the last sync.
I have made sure my iTunes is up to date and the iPad does have the latest version of it's OS.
I did do a "Run Diagnostics" and did both "Device connectivity tests" and "Device sync tests" and no problems were found. But I still get the errors!

This is wiered.You better call the Apple and say your problem.Maybe they could help you.Or maybe your iPad has a virus.If you think it has a virus , you have to restore it.

HT1296 Need help with sync from phone to computer

When I sync my phone to my laptop, I would like info I entered on the calendar on my phone to be added to the calendar on my computer. I can only get it to sync from computer to phone. I need to update both
any ideas. I have searched the help files and can't find this anywhere

My problem is similar. I just upgraded from the 4S to the 5 and I used to be able to sync the calendar on my iMac and iPhone using iCloud without getting duplicates by selecting/deselecting the appropriate calendars on the respective devices. Everything synced as I entered it.
I'm pretty sure it was working with the 5 until recently...
Today I noticed that an event I entered on the 5 for last week didn't show up on my iMac. When I checked the EDIT screen on the phone to see what calendars were checked, only the calendar for that event was (on the All on my iPhone). All but the Unfiled calendar are checked on the All on my iCloud. When I unchecked and rechecked the calendars under the Phone didn't help. Can't get the thing to sync...
Seems like most people are having problems with Exchange accts, but here I am with my iMac/Phone/Cloud...

I need help with this error message "seek encountered an internal error"

I wonder if anyone can help me with a Captivate issue: I just upgraded to 5.5 - when I try to insert a video slide I get an error "seek encountered an internal error". The video is a 35.3 MB flv file.
This is a prroject that I have been working on for months and need to switch the video on the slide to an updated video - so I try to delete the video slide that is there and insert a new slide but when browse for the new video file I want to use, I keep getting this error message.

Try <fx:XML>

Need Help with 404 error

Hello,
I have completed the local folder, tesing server, and remote server setup correctly (i think so).
My testing setup and files shown below:
My local folder for site shown below:
My advanced settings shown below:
I have downloaded all the files to the local folder from my remote server which are working fine on the live website http://www.caremoreconstruction.co.uk.
No layouts of the files/folders etc have been changed, I simply moved them over from the FTP server in to local folder I had created.
Just to confirm I have XAMPP installed and Apache runnining.
When I open DW CS5 and select the index.php file form the FILES tab, the main home page opens up and I little bar comes up at the top and says "This page has server proccesing directives that design view cannot display. Switch to Live View".
So I click on Live View and the home page loads up. I then press ctrl and click one of the links. (See picture below)
For some reason I am getting the following error message when I click on my links.
Object not found!
The requested URL was not found on this server. The link on the referring page seems to be wrong or outdated. Please inform the author of that page about the error.
If you think this is a server error, please contact thewebmaster.
Error 404
localhost
12/30/10 11:58:51
Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1
Please can someone help me!!
Regards
James

David,
This is the responce I have had from my website designer.
Happy new year to you also. Re Dreamweaver it’s not a tool we use I’m afraid, we generally use tools like Netbeans and code oriented text editors so I’m not best placed to advise on the config of it. I have used it back in 2003, it’s a great development platform, but I just ended up working with other tools.
Looking at the post though, you seem to have got the site running but the issue seems to be the friendly URLs. As David correctly identified, .htaccess and mod_rewrite are used to effect this. If you don’t have the correct .htaccess file in place this aspect of the navigation won’t work. You should also be running the site from the root directory – both the production (live) website and our development environments are setup in this way, so though I don’t think we implement root relative URIs in the site navigation, I can’t say there won’t be issues running it in a subdirectory off http://locahost without reviewing all the code, which I haven’t.
The .htaccess file you need is on your live website, but many FTP clients will not display this by default, so your FTP download may have missed it.
You can create it yourself, it needs the following directives. The “.” on the front of the filename is very important.
RewriteEngine On
RewriteBase /
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule ^(.*)$ index.php/$1 [L]
That should solve your navigation issue, providing the Apache mod_rewrite module is enabled. If it doesn’t I can’t really help you further, other than to suggest you get a second hosting account online. I seem to think you can use a remote development environment in Dreamweaver. The advantage here is that you’ll have an environment that you know to work, with all the components installed. No disrespect, but even we can spend ages configuring our development servers to work as we need, and much depends on the installation approach you use in setting up Apache, PHP and MySQL
Re the database, as David has sussed there is no MySQL database to concern yourself with. Other red herrings include login and register handlers which are not implemented. Your original brief included the possibility of a customer login to access your quotes & progress reports down the line, so we allowed for that in the initial build and planned for MySQL access but didn’t implement those features.
Hope that helps. Great to see how far you’ve come with this – I probably couldn’t get as far building in the same time! Also glad to see that the comments re the code and structure are good – it’s always interesting to see what another developer, who obviously knows his stuff, thinks of your code!!
Regards
Oliver Phillips
http://www.eantics.co.uk
OMG ITS WORKING NOW!!!!!
1. Move all files and folders for the website to the main root directory http://localhost/
2. Open notepad and copy/paste code above in to note pad.
3. Click Save As from files menu. Change save format to all files and call it .htaccess (dont forget to put the ''.'' before htaccess)
4. Move .htaccess file to the root directory of the local/testing site.
and that's it!
There is just one small problem, I have had to move the XAMPP folder out of the root directory http://localhost for the links to work in DW CS5. When I first tried the link on my home page (both in DW CS5 and Browser) it redirected me to the XAMPP home page.
I think the solution for this would be to put XAMPP back in http://localhost/xampp and move website file and folders to vhost.

Need help with syncing error!

Similar Messages

Maybe you are looking for