Need help with xml and combo boxes

Basically what im doing is a ui for a electronic book.
The book is broken into 3 parts and each part has its own set
of chapters.
My xml schema is pasted below.
And what i would like is to have two comboBoxes .
The first one would list the names of the parts available,
ie.. Part I, Part II, Part III.
the Second one would list the chapters avalable under that
part. For example, If Part i, is sected then the secodn combo box
would list chapter 1-5, while if the second part is selected, the
second combo box would list chapters 6-10.
Im using flash 8 pro, and the xmlconnector and comboboxes.
Maybe there is an easier way. PLEASE HALLP! This is driving me
nuts.
XML Schema:

Hi
I have just done this for another guy in this forum, I can
send you an example using UI Components - 3 Comboboxes each shows
the sub-options of its parent, one more than what you want. The
secret is in the construct of the XML file and how this creates the
correct Schema for binding.
Post me an email address and I can send you the files.

Similar Messages

I need help with XML Gallery Fade in out transition. somebody please help me :(

I need help with XML Gallery Fade in out transition. somebody please help me
I have my post dont want to duplicate it

The problem doesn't lie with your feed, although it does contain an error - you have given a non-existent sub-category. You need to stick to the categories and sub-categories listed here:
http://www.apple.com/itunes/podcasts/specs.html#categories
Subscribing to your feed from the iTunes Store page work as such, but the episodes throw up an error message. The problem lies with your episode media files: you are trying to stream them. Pasting the URL into a browser produces a download (where it should play the file) of a small file which does not play and in fact is a text file containing (in the case of ep.2) this:
[Reference]
Ref1=http://stream.riverratdoc.com/RiverratDoc/episode2.mp3?MSWMExt=.asf
Ref2=http://70.33.177.247:80/RiverratDoc/episode2.mp3?MSWMExt=.asf
You must provide a direct link to the actual mp3 file. Streaming won't work. The test is that if you paste the URL of the media file (as given in the feed) into the address bar of a browser it should play the file.

MOVED: [Athlon64] Need Help with X64 and Promise 20378

This topic has been moved to Operating Systems.
[Athlon64] Need Help with X64 and Promise 20378

I'm moving this the the Administration Forum. It seems more apporpiate there.

Need help with XML response to refresh document with context and prompts

I've been working with the Restful api for a few weeks now and have been able to figure out most of what I need to automate testing of our reports. However, one task that I have not been able to figure out is how to refresh a document that contains both a context and two prompts for dates.
Here is what I have tried, and what the API responds with.
1) I queried the API for this document's parameters using the following call after logging in -
headers = {:accept=>'application/xml', :content_type=>'application/xml', :x_sap_logontoken=>@token}
url = "http://our.url.net:6405/biprws/raylight/v1/documents/12345/parameters"
RestClient.get(url, headers)
The response from the API is:
<parameters>
 <parameter dpId="DP0" type="context" optional="false">
 <id>0</id>
 <technicalName>cQuery 1</technicalName>
 <name>Select a context</name>
 <answer type="Text" constrained="true">
 <info cardinality="Single">
 <lov partial="false">
 <values>
 <value id="CTX_1">LOAN</value>
 <value id="CTX_9">LOAN_APPLICATION</value>
 </values>
 </lov>
 <values>
 <value id="CTX_1">LOAN</value>
 <value id="CTX_9">LOAN_APPLICATION</value>
 </values>
 <previous>
 <value id="CTX_9">LOAN_APPLICATION</value>
 </previous>
 </info>
 <values>
 <value id="CTX_9">LOAN_APPLICATION</value>
 </values>
 </answer>
 </parameter>
</parameters>
2) This tells me I need to supply a context, so I then replace my RestClient.get call with a RestClient.put call with the following payload:
<parameters>
 <parameter>
 <id>0</id>
 <answer>
 <values>
 <value id=\"CTX_9\"/>
 </values>
 </answer>
 </parameter>
</parameters>
3) This satisfies the context portion of the refresh. The API replies with the following response, telling me I need to answer two prompts -
<parameters>
 <parameter dpId=\"DP0\" type=\"prompt\" optional=\"false\">
 <id>1</id>
 <technicalName>psEnter value(s) for Start Date of Application Received Date</technicalName>
 <name>Enter value(s) for Start Date of Application Received Date</name>
 <answer type=\"DateTime\" constrained=\"false\">\
 <info cardinality=\"Single\"/>
 </answer>
 </parameter>
 <parameter dpId=\"DP0\" type=\"prompt\" optional=\"false\">
 <id>2</id>
 <technicalName>psEnter value for End Date of Application Received Date</technicalName>
 <name>Enter value for End Date of Application Received Date</name>\
 <answer type=\"DateTime\" constrained=\"false\">
 <info cardinality=\"Single\"/>
 </answer>
 </parameter>
</parameters>
4) Here is where I am having problems. I have tried all kinds of permutations of the below payload/response body. All I ever get from the API is a 400 - BadResponse error.
<parameters>
 <parameter>
 <id>0</id>
 <answer>
 <values>
 <value id=\"CTX_9\"/>
 </values>
 </answer>
 </parameter>
</parameters>
<parameters>
 <parameter type=\"prompt\">
 <id > 1 </ id>
 <answer type=\"DateTime\">
 <values>
 <value>2012-06-11T09:50:54.000-04:00</value>
 </values>
 </answer>
 </parameter>
 <parameter type=\"prompt\">
 <id > 2 </ id>
 <answer type=\"DateTime\">
 <values>
 <value>2014-07-11T09:50:54.967-04:00</value>
 </values>
 </answer>
 </parameter>
</parameters>
I am not very good with XML and the terminology around it, and I haven't received much training around using the Restful API other than the SDK documentation. I have a feeling there is something very basic that Im missing here. What is the correct XML needed in the response body to properly refresh the document?

If you are more confortable with JSON, Raylight supports it as well.
Best regards,
Anthony

Need help with JTextArea and Scrolling

import java.awt.*;
import java.awt.event.*;
import java.text.DecimalFormat;
import javax.swing.*;
public class MORT_RETRY extends JFrame implements ActionListener
private JPanel keypad;
private JPanel buttons;
private JTextField lcdLoanAmt;
private JTextField lcdInterestRate;
private JTextField lcdTerm;
private JTextField lcdMonthlyPmt;
private JTextArea displayArea;
private JButton CalculateBtn;
private JButton ClrBtn;
private JButton CloseBtn;
private JButton Amortize;
private JScrollPane scroll;
private DecimalFormat calcPattern = new DecimalFormat("$###,###.00");
private String[] rateTerm = {"", "7years @ 5.35%", "15years @ 5.5%", "30years @ 5.75%"};
private JComboBox rateTermList;
double interest[] = {5.35, 5.5, 5.75};
int term[] = {7, 15, 30};
double balance, interestAmt, monthlyInterest, monthlyPayment, monPmtInt, monPmtPrin;
int termInMonths, month, termLoop, monthLoop;
public MORT_RETRY()
Container pane = getContentPane();
lcdLoanAmt = new JTextField();
lcdMonthlyPmt = new JTextField();
displayArea = new JTextArea();//DEFINE COMBOBOX AND SCROLL
rateTermList = new JComboBox(rateTerm);
scroll = new JScrollPane(displayArea);
scroll.setSize(600,170);
scroll.setLocation(150,270);//DEFINE BUTTONS
CalculateBtn = new JButton("Calculate");
ClrBtn = new JButton("Clear Fields");
CloseBtn = new JButton("Close");
Amortize = new JButton("Amortize");//DEFINE PANEL(S)
keypad = new JPanel();
buttons = new JPanel();//DEFINE KEYPAD PANEL LAYOUT
keypad.setLayout(new GridLayout( 4, 2, 5, 5));//SET CONTROLS ON KEYPAD PANEL
keypad.add(new JLabel("Loan Amount$ : "));
keypad.add(lcdLoanAmt);
keypad.add(new JLabel("Term of loan and Interest Rate: "));
keypad.add(rateTermList);
keypad.add(new JLabel("Monthly Payment : "));
keypad.add(lcdMonthlyPmt);
lcdMonthlyPmt.setEditable(false);
keypad.add(new JLabel("Amortize Table:"));
keypad.add(displayArea);
displayArea.setEditable(false);//DEFINE BUTTONS PANEL LAYOUT
buttons.setLayout(new GridLayout( 1, 3, 5, 5));//SET CONTROLS ON BUTTONS PANEL
buttons.add(CalculateBtn);
buttons.add(Amortize);
buttons.add(ClrBtn);
buttons.add(CloseBtn);//ADD ACTION LISTENER
CalculateBtn.addActionListener(this);
ClrBtn.addActionListener(this);
CloseBtn.addActionListener(this);
Amortize.addActionListener(this);
rateTermList.addActionListener(this);//ADD PANELS
pane.add(keypad, BorderLayout.NORTH);
pane.add(buttons, BorderLayout.SOUTH);
pane.add(scroll, BorderLayout.CENTER);
addWindowListener( new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
public void actionPerformed(ActionEvent e)
String arg = lcdLoanAmt.getText();
int combined = Integer.parseInt(arg);
if (e.getSource() == CalculateBtn)
try
JOptionPane.showMessageDialog(null, "Got try here", "Error", JOptionPane.ERROR_MESSAGE);
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Got here", "Error", JOptionPane.ERROR_MESSAGE);
if ((e.getSource() == CalculateBtn) && (arg != null))
try{
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 1))
monthlyInterest = interest[0] / (12 * 100);
termInMonths = term[0] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 2))
monthlyInterest = interest[1] / (12 * 100);
termInMonths = term[1] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 3))
monthlyInterest = interest[2] / (12 * 100);
termInMonths = term[2] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Invalid Entry!\nPlease Try Again", "Error", JOptionPane.ERROR_MESSAGE);
} //IF STATEMENTS FOR AMORTIZATION
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 1))
loopy(7, 5.35);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 2))
loopy(15, 5.5);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 3))
loopy(30, 5.75);
if (e.getSource() == ClrBtn)
rateTermList.setSelectedIndex(0);
lcdLoanAmt.setText(null);
lcdMonthlyPmt.setText(null);
displayArea.setText(null);
if (e.getSource() == CloseBtn)
System.exit(0);
private void loopy(int lTerm,double lInterest)
double total, monthly, monthlyrate, monthint, monthprin, balance, lastint, paid;
int amount, months, termloop, monthloop;
String lcd2 = lcdLoanAmt.getText();
amount = Integer.parseInt(lcd2);
termloop = 1;
paid = 0.00;
monthlyrate = lInterest / (12 * 100);
months = lTerm * 12;
monthly = amount *(monthlyrate/(1-Math.pow(1+monthlyrate,-months)));
total = months * monthly;
balance = amount;
while (termloop <= lTerm)
displayArea.setCaretPosition(0);
displayArea.append("\n");
displayArea.append("Year " + termloop + " of " + lTerm + ": payments\n");
displayArea.append("\n");
displayArea.append("Month\tMonthly\tPrinciple\tInterest\tBalance\n");
monthloop = 1;
while (monthloop <= 12)
monthint = balance * monthlyrate;
monthprin = monthly - monthint;
balance -= monthprin;
paid += monthly;
displayArea.setCaretPosition(0);
displayArea.append(monthloop + "\t" + calcPattern.format(monthly) + "\t" + calcPattern.format(monthprin) + "\t");
displayArea.append(calcPattern.format(monthint) + "\t" + calcPattern.format(balance) + "\n");
monthloop ++;
termloop ++;
public static void main(String args[])
MORT_RETRY f = new MORT_RETRY();
f.setTitle("MORTGAGE PAYMENT CALCULATOR");
f.setBounds(600, 600, 500, 500);
f.setLocationRelativeTo(null);
f.setVisible(true);
}need help with displaying the textarea correctly and the scroll bar please.
Message was edited by:
new2this2020

What's the problem you're having ???
PS.

Need help with XML transformation

I am not sure this is the right place for this. But i will try it here. I am very troubled with my XSLT. Trying to transform a text Coupon which has the following html for it. So,
_1. INPUT is:_
<html>
<head>
</head>
<body>

This coupon is for a good guy whose first name is :




Sadd




also whose <var>full_name</var> is Sadd Hossain




He is a software engineer for
S&H

</body>
</html>
*2. output needed is:*
<?xml version="1.0" encoding="UTF-8"?>
<POSMESSAGE>
<TextMSG >
This coupon is for a good guy whose first name is :
</TextMSG>
<TextMSG >
</TextMSG>
<TextMSG align="center">
<emph>SADD</emph>
</TextMSG>
<TextMSG >
</TextMSG>
<TextMSG align="right" >
also whose full_name is Sadd Hossain
</TextMSG>
<TextMSG>
</TextMSG>
<TextMSG align="left" >
He is a software engineer
for S&H
</TextMSG>
</POSMESSAGE>
*3. XSLT for this*
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output method="xml"/>
<xsl:template match="body">
<POSMESSAGE>
<xsl:for-each select="p">
<TextMSG>

<xsl:attribute name="align"><xsl:value-of select="@align"/></xsl:attribute>

<xsl:attribute name="font"><xsl:value-of select="@size"/></xsl:attribute>
<xsl:value-of select="."/>
</TextMSG>
<xsl:for-each select="b">
<emph>
<xsl:value-of select="."/>
</emph>
</xsl:for-each>
</xsl:for-each>
</POSMESSAGE>
</xsl:template>
</xsl:stylesheet>
*4: the above xslt generating this output*
<?xml version="1.0" encoding="UTF-8"?>
<POSMESSAGE><TextMSG align="" font="">
This coupon is for a good guy whose first name is :
</TextMSG><TextMSG align="" font="">
</TextMSG><TextMSG align="center" font="">
SADD
</TextMSG><TextMSG align="center" font="">
</TextMSG><TextMSG align="right" font="">
also whose full_name is Sadd Hossain
</TextMSG><TextMSG align="left" font="">
</TextMSG><TextMSG align="left" font="">
He is a software engineer
for S&H
</
*5: Need help with this. what should my xslt look like to get the desired output???????????????*
any help or direction will be very much appreciated. Thank you_

I have below suggestions:
1. Please use code option given in message editor toolbar for posting any formatted content like XML, Java code snippet etc.
2. replace & in your source XML with _& a m p ;_ (Without spaces, I have put spaces to make it visible here).
3. I have modified your XSLT according output XML you have given. I am not sure what you want to do with some elements like , , <var> etc. change below XSLT as you require for these elements.
Modified XSLT:
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
 <xsl:output method="xml"/>
 <xsl:template match="body">
 <POSMESSAGE>
 <xsl:for-each select="p">
 <TextMSG>
 <xsl:if test=". != ''">
 <xsl:for-each select="@align">
 <xsl:attribute name="align">
 <xsl:value-of select="."></xsl:value-of>
 </xsl:attribute>
 </xsl:for-each>
 <xsl:value-of select="."/>
 </xsl:if>
 </TextMSG>
 </xsl:for-each>
 </POSMESSAGE>
 </xsl:template>
</xsl:stylesheet>
OUTPUT:
<?xml version="1.0"?>
<POSMESSAGE>
 <TextMSG>This coupon is for a good guy whose first name is :</TextMSG>
 <TextMSG/>
 <TextMSG align="center">Sadd</TextMSG>
 <TextMSG/>
 <TextMSG align="right">alsowhose full_name is Sadd Hossain</TextMSG>
 <TextMSG/>
 <TextMSG align="left">He is a softwareengineer forS&H</TextMSG>
</POSMESSAGE>

Need help with trim and null function

Hi all,
I need help with a query. I use the trim function to get the first three characters of a string. How do I write my query so if a null value occurs in combination with my trim to say 'Null' in my results?
Thanks

Hi,
Thanks for the reply. What am I doing wrong?
SELECT trim(SUBSTR(AL1.user_data_text,1,3)),NVL
(AL1.user_data_text,'XX')
FROM Table
I want the XX to appear in the same column as the
trim.The main thing you're doing wrong is not formatting your code. The solution may become obvious if you do.
What you're saying is:
SELECT trim ( SUBSTR (AL1.user_data_text, 1, 3))
,       NVL ( AL1.user_data_text, 'XX' )
FROM    Tablewhich makes it clear that you're SELECTing two columns, when you only want to have one.
If you want that column to be exactly like the first column you're currently SELECTing, except that when that column is NULL you want it to be 'XX', then you have to apply NVL to that column, like this:
SELECT NVL ( trim ( SUBSTR (AL1.user_data_text, 1, 3))
            , 'XX'
FROM    Table

Noob needs help with Logic and Motu live setup.

Hello everyone,
I'm a noob / semi noob who could use some help with a live setup using 2 MOTU 896HD's and Logic on a Mac.
Here's the scenario:
I teach an outdoor marching percussion section (a drumline and a front ensemble of marimbas and vibes). We have an amazing setup of live sound to amplify and enhance the mallet percussion. There is a yamaha PA system with 2 subs and 2 mains which are routed through a rack unit that processes the overall PA balance. I'm pretty sure that the unit is supposed to avoid feedback and do an overall cross-over EQ of the sound. Other then that unit, we have 2 motu896hd units which are routed via fire-wire. I also have a coax cable routing the output of the secondary box to the input of the primary box (digital i/o which converts to ADAT in (i think?)..?
Here's the confusion:
There are more then 8 inputs being used from the ensemble itself, so I need the 16 available inputs to be available in Logic. I was lead to believe that the 2nd motu unit would have to be sent digitally to the 1st motu unit via coax digital i/o. Once in Logic, however, I cannot find the signal or any input at all past the 8th input (of the 1st unit).
Here's the goal:
All of my performers and inputs routed via firewire into a Mac Mini running OSX and Logic pro.
I want to be able to use MainStage and run different patches of effects / virt. instruments for a midi controller keyboard / etc.
I want to be able to EQ and balance the ensemble via Logic.
Here's another question:
How much latency will I be dealing with? Would a mac mini with 4gb of ram be able to handle this load? With percussion, I obviously want the sound as latency free as possible. I also, however, want the flexibility of sound enhancement / modification that comes with Logic and the motu896hd units.
Any help would be REALLY appreciated. I need the routing assistance along with some direction as to whether or not this will work for this type of application. I'm pretty certain it does, as I have spoken with some other teachers in similar venues and they have been doing similar things using mac mini's / logic / mainstage / etc.
Thanks in advance,
Chris

You'll definitely want to read the manual to make sure the 896HDs are connected together properly. ADAT is a little tricky, it's not just a matter of cabling them together. Go to motunation.com if you need more guidance on connecting multiple devices. Beyond that initial hookup, here are a couple of quick suggestions:
1. Open CueMix and see if both devices are reported there. If not, your connections aren't correct. Be sure to select 44.1kHz as your sample rate, otherwise you are reducing the number of additional channels. For instance at 88.2kHz you would get half the additional channels via ADAT.
2. You may need to create an aggregate device for the MacBook to recognize more than the first 896HD. Lots of help on this forum for how to do that. Again, first make sure you have the 896HDs connected together properly.
3. As for latency with Mainstage on the Mini, no way to know until you try it. Generally MOTU is fantastic for low latency work but Mainstage is a question mark for a lot of users right now. If the Mini can't cut the mustard, you have a great excuse to upgrade to a MacBook Pro.

Need help with XML structure

Hello, I would like to create an extention that will help to
manage a
glossary.
First I need to decide on the structure of the xml document
that will
contain all glossary entries. Since I don't have much
experience with XML in
extention content, I was wondering if there are certain
recommendations I
should follow.
What is preferable: using attributes that will holt the
content or rather
having xml-elements. What is easy to parce?
I would greatly appreciate any tips, help and suggestions.
Olyalyu

.oO(olga)
>First I need to decide on the structure of the xml
document that will
>contain all glossary entries. Since I don't have much
experience with XML in
>extention content, I was wondering if there are certain
recommendations I
>should follow.
I would start as simple as possible, for example with
something like
this:
<glossary>
<entry>
<term>...</term>
<explanation>...</explanation>
</entry>
<entry>
<term>...</term>
<explanation>...</explanation>
</entry>
</glossary>
Of course it also depends on what you want to do with this
structure and
if you need additional informations.
>What is preferable: using attributes that will holt the
content or rather
>having xml-elements. What is easy to parce?
There's no real rule-of-thumb whether to use elements or
attributes.
If unsure, use elements.
Micha

Need help with XML delay URGENT!!!

Hi i need help making a flash movie to load everything from
xml. It has to load text, images and flv, but, it has to load them
and end them at the time said in the xml. So flash loads and
unloade the text or image or video at the time specified in the
XML! PLEASE HELP I NEED THIS DONE TODAY!!!!! VERY IMPORTANT!!!
Contact me by msn [email protected] or send mail or
reply here!!

It was probably a little unclear initially (no offence
intended ) whether your problem was with getting the data from XML
or with the sequencing aspect. I assume that its the sequencing
aspect based on your recent reply.
So if it was me I would parse the loaded info into Date
objects for the load and remove times and have this information
handled by some sort of sequencing code.
At its simplest, you could compare the xml-derived date/times
for load/unload with the current system date/time and use a
setInterval function to initiate the load after the calculated
difference in milliseconds has passed. Similar for the removeclip
timing.

Help with Radio Buttons & Combo Box for Flash Form that sends email

I'm having a bit of a hard time with a Flash form that I'm working on.
I've got the basic text fields working fine, but I'm not sure how to retrieve the values from the Radio Button and Menu List components.
The PHP script pulls the values from the text fields with:
$contact_name = $_POST['name'];
$contact_email = $_POST['email'];
$contact_subject = $_POST['subject'];
but using
$radioGroup = $_POST['radioGroup'];
doesn't retrieve the selected radio button value.
The radio buttons have a groupName of "radioGroup". The combo box component doesn't even show up in the HTML version, but does in the .swf.
Can anyone point me in the correct direction to pull these values from these components and get them passed to the PHP form? The native .FLA and the php file are here for reference:
http://dl.getdropbox.com/u/21984/flashform.zip
My solution needs to be ActionScript 2.
Thanks!

again, you assign a variable. the selected radiobutton's data and/or label isn't going to magically be sent to the php file.
for example, if you have sendLV and receiveLV loadvars instances, you can use:
sendLV.rbData=yourradiogroup.selection.data;
sendLV.yourothervariables=yourothervariables;
sendLV.sendAndLoad("yourphp.php",receiveLV,"POST");

Need help with "get info" dialog box

Hi Everyone!
I need some help with trying to figure out what some of the options are in the "Get Info" dialog box. I've searched the iTunes help and these forums, but can't find anything.
So, in the options tab,
1. What does "Part of compilation" Y/N, do for me?
2. Same for "Remember Position"
3. And finally, "Gapless album"
Thanks, Vince.

1. when you import a compilation album (like an 80's compilation or something), itunes will import it as
song 1, artist 1, 80's greatest hits
song 2, artist 2, 80's greatest hits etc
Click part of a compliation means that, it means that it would keep them altogether rather than having lots of songs everywhere
2. If you start playing a song, then stop, part way through, when you next come to the song, itunes will remember where you left off
3. Albums like jean michel jarre, classical, mike oldfield, etc, have many songs which merge into each other. Having gapless album ticked will ensure that, when playing the album, there are no gaps between songs

Help with xml and getNextHighestDepth

I have a thumbnail gallery that is called in with xml- On
stage is a movieClip that covers the entire thumbnail area with the
alpha set to 0. what I'm trying to do is onRelease- have that mc
brought to the front and it's alpha state tween to 100- i've not
much experience using 'getNextHighestDepth' so I'm assuming
something is wrong here... if anyone can help I'd really appreciate
it!
Thanks!

i think you want something along the lines of :
stageFade_mc.swapDepths(theMovieOnTopAtTheMoment);
Note that only dynamically created movies have depths. So if
either of the movieclips in question are just sitting in your
timeline you cant swap their depths.
In that case you either need to duplicateMovieClip() or just
set things _visible property where apropriate.
good luck
jon

Need help with INSERT and WITH clause

I wrote sql statement which correctly work, but how i use this statment with INSERT query? NEED HELP. when i wrote insert i see error "ORA 32034: unsupported use of with clause"
with t1 as(
select a.budat,a.monat as period,b.vtweg,
c.gjahr,c.buzei,c.shkzg,c.hkont, c.prctr,
c.wrbtr,
c.matnr,
c.menge,
a.monat,
c.zuonr
from ldw_v1.BKPF a,ldw_v1.vbrk b, ldw_v1.bseg c
where a.AWTYP='VBRK' and a.BLART='RV' and a.BUKRS='8431' and a.awkey=b.vbeln
and a.bukrs=c.bukrs and a.belnr=c.belnr and a.gjahr=c.gjahr and c.koart='D'
and c.ktosl is null and c.gsber='4466' and a.gjahr>='2011' and b.vtweg='01'
,t2 as(
select a.BUKRS,a.BELNR, a.GJAHR,t1.vtweg,t1.budat,t1.monat from t1, ldw_v1.bkpf a
where t1.zuonr=a.xblnr and a.blart='WL' and bukrs='8431'
,tcogs as (
select t2.budat,t2.monat,t2.vtweg, bseg.gjahr,bseg.hkont,bseg.prctr,
sum(bseg.wrbtr) as COGS,bseg.matnr,bseg.kunnr,sum(bseg.menge) as QUANTITY
from t2, ldw_v1.bseg
where t2.bukrs=bseg.bukrs and t2.belnr=bseg.BELNR and t2.gjahr=bseg.gjahr and BSEG.KOART='S'
group by t2.budat,t2.monat,t2.vtweg, bseg.gjahr,bseg.hkont,bseg.prctr,
bseg.matnr,bseg.kunnr
,t3 as
select a.budat,a.monat,b.vtweg,
c.gjahr,c.buzei,c.shkzg,c.hkont, c.prctr,
case when c.shkzg='S' then c.wrbtr*(-1)
else c.wrbtr end as NTS,
c.matnr,c.kunnr,
c.menge*(-1) as Quantity
from ldw_v1.BKPF a,ldw_v1.vbrk b, ldw_v1.bseg c
where a.AWTYP='VBRK' and a.BLART='RV' and a.BUKRS='8431' and a.awkey=b.vbeln
and a.bukrs=c.bukrs and a.belnr=c.belnr and a.gjahr=c.gjahr and c.koart='S'
and c.ktosl is null and c.gsber='4466' and a.gjahr>='2011' and b.vtweg='01'
,trevenue as (
select t3.budat,t3.monat,t3.vtweg, t3.gjahr,t3.hkont,t3.prctr,
sum(t3.NTS) as NTS,t3.matnr,t3.kunnr,sum(t3.QUANTITY) as QUANTITY
from t3
group by t3.budat,t3.monat,t3.vtweg, t3.gjahr,t3.hkont,t3.prctr,t3.matnr,t3.kunnr
select NVL(tr.budat,tc.budat) as budat,
NVL(tr.monat,tc.monat) as monat,
NVL(tr.vtweg,tc.vtweg) as vtweg,
NVL(tr.gjahr, tc.gjahr) as gjahr,
tr.hkont as NTS_hkont,
tc.hkont as COGS_hkont,
NVL(tr.prctr,tc.prctr) as prctr,
NVL(tr.MATNR, tc.MATNR) as matnr,
NVL(tr.kunnr, tc.kunnr) as kunnr,
NVL(tr.Quantity, tc.Quantity) as Quantity,
tr.NTS as NTS,
tc.COGS as COGS
from trevenue TR full outer join tcogs TC
on TR.BUDAT=TC.BUDAT and TR.MONAT=TC.MONAT and TR.GJAHR=TC.GJAHR
and TR.MATNR=TC.MATNR and TR.KUNNR=TC.KUNNR and TR.QUANTITY=TC.QUANTITY
and TR.VTWEG=TC.VTWEG and TR.PRCTR=TC.PRCTR
Edited by: user13566113 on 25.03.2011 5:26

Without seeing what you tried it is hard to say what you did wrong, but this is how it would work
SQL> create table t ( n number );
Table created.
SQL> insert into t
2 with test_data as
3    (select 1 x from dual union all
4     select 2 x from dual union all
5     select 3 x from dual union all
6     select 4 x from dual)
7 select x from test_data;
4 rows created.
SQL>

I need help with CSS and floating

Okay, I know I need to get up on CSS and get rid of tables in
my sites.
However, I'm running up against a problem, and after banging
my head
against it for a while, I realize I need help. I've stripped
this down
so as to only show the area where I'm having difficulty.
What I want is a page that has everything down the center,
taking up no
more than 750 pixels and no more than 550 pixels of width. No
problem there.
After the header and the top content, I'd like to have two
"columns",
each in it's own separately-colored box. I would like the
right-side
column/box to be a static size, while the left-side
column/box sizes
dynamically.
Where I'm having problems is that when one column is boxed,
it's fine,
but whenever I wrap each column in its own box, the
fixed-size box
either jumps below or above the other box (depending on which
one has
been floated and which order the div's appear in the code).
Here are the links:
CSS:
http://www.afice.org/stylesheet/floatmestyles.css
ex 1:
http://www.afice.org/floatme1.html
ex 2:
http://www.afice.org/floatme2.html
Before sending, I took a look again, just to see if I was
missing
anything. I did notice that it doesn't seem to be that the
box is
jumping down so much as it is that it's getting written over.
Anyway, sorry for the long-winded explanation. I hope I've
managed to
explain what I'm trying to do well enough that someone can
tell me where
I'm going wrong.
Thanks,
--Kevin

Do you want something like this:
http://www.pmob.co.uk/temp/spointfooter.htm
You will need to look at the code to see how it was done.
Otherwise, there are different examples here on Pauls' site:
http://www.pmob.co.uk/temp/3colfixedtest_4.htm
Nadia
Adobe� Community Expert : Dreamweaver
http://www.csstemplates.com.au
- CSS Templates | Free Templates
http://www.perrelink.com.au
- Web Dev
http://www.DreamweaverResources.com
- Dropdown Menu Templates|Tutorials
http://www.adobe.com/devnet/dreamweaver/css.html
"Kevin D-R" <[email protected]> wrote in
message
news:[email protected]...
> Okay, I know I need to get up on CSS and get rid of
tables in my sites.
> However, I'm running up against a problem, and after
banging my head
> against it for a while, I realize I need help. I've
stripped this down so
> as to only show the area where I'm having difficulty.
>
> What I want is a page that has everything down the
center, taking up no
> more than 750 pixels and no more than 550 pixels of
width. No problem
> there.
>
> After the header and the top content, I'd like to have
two "columns", each
> in it's own separately-colored box. I would like the
right-side column/box
> to be a static size, while the left-side column/box
sizes dynamically.
>
> Where I'm having problems is that when one column is
boxed, it's fine, but
> whenever I wrap each column in its own box, the
fixed-size box either
> jumps below or above the other box (depending on which
one has been
> floated and which order the div's appear in the code).
>
> Here are the links:
>
> CSS:
http://www.afice.org/stylesheet/floatmestyles.css
>
> ex 1:
http://www.afice.org/floatme1.html
>
> ex 2:
http://www.afice.org/floatme2.html
>
> Before sending, I took a look again, just to see if I
was missing
> anything. I did notice that it doesn't seem to be that
the box is jumping
> down so much as it is that it's getting written over.
>
> Anyway, sorry for the long-winded explanation. I hope
I've managed to
> explain what I'm trying to do well enough that someone
can tell me where
> I'm going wrong.
>
> Thanks,
>
> --Kevin

Need help with xml and combo boxes

Similar Messages

Maybe you are looking for