Need immediate help: Idocs not showing up in productive PI

Hi gurus,
we are trying to go productive today with our pi 7.0 server. now we are facing the problem, that the idocs from our productive system don't get into the pi. in the productive erp system we can see them leaving with green status, but in sxmb_moni they don't show up. can anyone please help?
regards,
michael

hi michael
tRFC calls which transfer IDocs use the function module IDOC_INBOUND_ASYNCHRONOUS at reception
If an IDoc in the sending system has been passed to tRFC (IDoc status "03"), but has not yet been input in the receiving system, this means that the tRFC call has not yet been executed.
To check the status of the tRFC calls, choose
Tools -> IDoc Interface/ALE-> Administration -> Monitoring->ｮ Troubleshooting -> RFC Queue (SM58) and specify any additional selection criteria.
basically The program RSARFCEX restarts unsuccessful tRFC calls.
regards
kummari

Similar Messages

  • I can't find my serial number. My CC is not showing up under products and services

    I can't find my serial number. My CC is not showing up under products and services

    Hi Natasha,
    I have checked the order details and everything seems to be fine from our end . if you have already downloaded the software, i would request you to kindly launch the software and then click on License this software and sign in with the Email ID that you used while placing the order . This should activate the product on your machine .
    If you need to download the product ,you can simply navigate over to Creative.Adobe.com and sign in with the same id and download .
    Regards,
    Kartikay Sharma

  • My iPad 2 is not recognised by iTunes. I have tried all the steps as mentioned by the support communities. I have spent lot of time trying to diagnose the problem but no success yet. I need immediate help. I have my laptop with windows XP.

    I have tried all the steps as suggested by the community partners i.e. uninstall/reinstall itunes (number of times). If I plug my ipad 2 on my office PC which has itunes, it is recognised immediately. My lap top does not show 'NEW HARDWARE FOUND" as iPad. It just says new hardware found and shows scanner and camera hardware recognised. In my opinion there could be programme file which is having conflict with ipad 2 recognisation. I am surprised to find that APPLE has not yet come out with straightforward steps for stting up procedures to avoid this recognition issue. It is waste of time and causing lot of aggravation among iPad 2 purchasers.

    Sounds like it could be your computer and not Apple. Sounds like some registry issues and/or other underlying problems.
    What are your computer specs? Year? Manufacturer? RAM? Processor (type & speed, # of cores), OS (32 bit? 64 bit? Professional? Standard?)

  • Help: Records not showing when cube is placed under the Multiporivider

    Hi Experts,
    I have a Cube called Bcube with char Plant,calm year/month, material and Key Figure, Pqty
    When I generate a report on this Cube, everything looks fine and I see plants, year, etc in the report
    There are 2 other cubes:
    MCube also has char Plant,calyear/month, material and Key Figure: Pqty, Sqty, TQty, AQty
    DCube also has same as BCube: with char Plant,calyear/month, material and Key Figure Pqty
    When I place all three cubes under the multiprovider, the values from the BCube does not show up in reports
    e.g. in a simple report such as
    Row       :  Plant
    Columns:  Pqty, Sqty, TQty, AQty
    In the Multiprovider, under the Indentification of Characteristics, I checked the boxes for all three cubes whenever the same charactertic in all cubes showed up for identification: e.g..
    InfoProvider  InfoObject
    Bcube----
    Plant
    MCube-------Plant
    DCube -
    Plant
    and same for. e.g. 0Calyear
    and same for Key Figures, e.g. I checked all 3 boxes  for PQty which exists in each of the cubes
    1. Why is my data for BCube not showing when reporting against the multiprovider?
    2. what does it mean by checking the 3 boxes for Plant? and checking the 3 boxes for 0Calyear.
    Thanks

    Hi,
    regarding your questions:
    1. When I run listcube against the multiprovider, I only went to the output list to select the fields I needed in the output; then entered the particular cube e.g. BCube in the infoprovider field. That was it (NO other selection) and I got the described results I explained earlier. If you have a specific test for me to try, please let me know.
    2. Please find the settings in both characteristics and key figures for all cubes in the MULTIPROVIDER maintenance screen:
    Characteristic Assighment:
    0calyear -- 3 boxes checked for BCube, DCube & MCube
    Plant -- 3 boxes checked for BCube, DCube & MCube
    0Material-- 3 boxes checked for BCube, DCube & MCube
    Key Figure selection
    PQty-- 3 boxes checked for BCube, DCube & MCube
    Sqty --checked for DCube, this key fig is ONLY in DCube
    TQty--checked for DCube, this key fig is ONLY in DCube
    AQty--checked for DCube, this key fig is ONLY in DCube
    I hope this helps you to guide me.
    Or, were you referring to mappings in the transformations?
    Thanks

  • Idoc not showing in R/3

    Hi,
    Iam Currentl running File to Idoc interface. Message is success in moni also and runtime workbecnh also. But when iam checking R/3 using WE19 tcode by giving date its not showing . It showing like no values found. Can anybody tel me what is the reason?

    Hi,
    Dont seach with IDOC no in R/3. Check in WE02 transaction not WE19
    Search by Date only ........then go under your INBOUND  IDOC type node in WE02 in ECC. Also Please check the ECC client no you are posting the IDOC.
    Please be confirm in SLD your ECC business system client . And search the IDOC in ECC in same client no.
    You can also chek in ID check Adapter Specific Message attributes for ECC business system & also click the Compare with SLD Option.
    You can found this option after opening Business system in ID from menu.

  • Help topics not showing up when clicked

    For some reason none of the help topics will show up now when I click on them. I click on help, type in my question, get some links and when I click on them it closes the help window but nothing else pops up. Do I need to reinstall or is there some option that I turned off by accident?

    Take a look at this http://support.apple.com/kb/TS1538
    http://support.apple.com/kb/TS3716

  • Need Immediate help...importing issue

         I work for a video editing company and today out of the blue, Premiere Pro started to act funny, its auto cropping clips that I am importing. It used to import these files fine and now its cutting them in half, I have tried all the basic stuff...I sort of also work IT here so the (re-install, reboot, try different settings) have all been done. The fact is it was doing it fine the other day and now it is making my workflow for the day grind to a halt until I figure this out.
    Immediate help/suggestions would be greatly appreciated.
                                                This is how its importing                                                                                 This his how it plays in a media player
    -Chris

    Im using Adobe Premiere CS5.5
    I have all updates
    Using windows 7 Pro
    Intel Core i7 2600K CPU @ 3.4Ghz
    16GB of ram
    64 bit OS
    source footage is:
    WMV File
    640x480
    2000kbps data rate
    29 fps
    I get no error codes
    this occurs immediatley when I drop it into premiere, and in the timeline and when I export.
    Thank you

  • Cost analysis not showing up in production order

    Hi All
    Preliminary cost analysis is not showing up in the production order...can anyone suggest what could be the possible reason for this

    Hi,
    Once you issue goods(GI) to order then only you can see actaul cost in cost analysis in Production order.
    if you are looking for target cost in cost analysis,you have to post goods receipt(GR) from order to inventory.
    hope this helps you.
    Thanks,
    Rau

  • My Adobe ID account does not show my purchased products

    When I log into my Adobe ID, it does not show that I have purchased Photoshop CS5, when I indeed did. How do I change this?

    JJMack wrote:
    When you activate during Acrivation you need a internet connection activation will register your product and serial number into you adobe id account.
    Been awhile since I bought a product, but as I remember it there was a box that asked "do you want to register now or later".  You have to choose yes and then fill in the blanks with your name, address, e-mail and whatever.  It does not to this automatically.

  • IDCS3 - Mac:  Plugins do not show up on production machines

    I have converted a series of plugins on my Mac from CS2 to CS3 and have made their release versions available to our production people. I can see them fine on my box, but when the plugins are installed on Macs other than my own the plugins do not show up inside of InDesign. I have verified that the plugins are installed in the appropriate location on the hard drive. Has anyone else had similar problems and if they did, how did they solve it?
    TIA!
    John

    Hi John,
    Sorry about my confusing message. "CFShow(CFSTR("your message"));" is a way to output text from your code to the Console in runtime. You may be able to determine the flow of your code.
    pete

  • FTP folder location is not showing in the production server but exist in the development server.

    Hi,
    a wired glitch in my SSIS 2005 package in production server where the FTP folder location is not showing  but its existing in my laptop version
    EX: - t01/app/_res folder
    When i open the package from the production server "_res" is not showing within the remote path in the file transfer task.
    but "_res" folder is shown in my development environment.
    I tried with winscp FTP software in the production sever , and was able to access the  "_res" location through the FTP software. What could this be?  a BIDS sofitware version issue???
    VS 2005 Version in development server
    -Is 8.0.50727.42(Premier Partner ENU)   .net framework is 4.5.1
    VS 2005 Version in production server
    -Is 8.0.50728 (Premier Partner ENU)   .net framework is 2.0 Service pack 2.0
    thanks.

    When you open the package on the production server, do you mean opening it with your Windows account from BIDS on that server? Ff the ftp connection in the package has a password it will have been stored in your laptop when you designed the package. when
    you deployed the pacakge on the server as a file and open it with BIDS then the password will be gone. You would have to go into the package ftp connection properties, reassign your password and save the connection and the package again.
    Jan D'Hondt - SQL server BI development

  • Need Immediate Help - doing presentation NOW - projector not mirroring!!

    HELP!!!!
    We are in Ireland, from Canada, teaching for four days, and the projector is not detecting the MacBook (not the Pro, that is at home) at all - we have tried to detect displays repeatedly, and nothing happens. The light is on the Mitsubishi projector, it says NO SOURCE, everything is connected properly, and we are totally freaked thus far...
    Any help VERY welcome!
    Thanks,
    Patty

    Sorry for the delay in etting back to you, hopefuly you have it sorted by now. If not try these;
    1. On your list you have RGB input, select this then try and change this to video,(on mine I have a choice of RGB & Video), give it a few seconds to which it will obviously find nothing then switch it back to RGB which it will search again and fingers crossed will find the output signal of your MacBook.
    2. Check the output resolution of the projector then change your MacBook's resolution to that of the projector (I dont think this will make much of a difference but its worth a shot!)
    3. If still no joy I would try and find an alternative display just to check your output from the MacBook is working ok, a normal computor monitor will do the job other wise anything with a VGA input. This will at least let you know if its the MacBook or the projector that has the problem.
    Hope you manage to get it sorted. When you do please post back as it would be good to know what happend.

  • Need immediate help! QuickTime completely messed since system recovery!

    Our computer crashed due to a virus not too long ago. When we recovered the OS, QuickTime reverted to version 6, but 7 remained on the HD. I uninstalled 6, but 7 still doesn't work.
    Specifics:
    iTunes keeps encountering an error and needs to close whenever I open it.
    Every application using QT closes with an error and displays "Some of your QuickTime software is out-of-date," and clicking "Do It Now" causes another error.
    I cannot uninstall QuickTime. Everytime I try, the procedure rolls back and I get the message "Fatal error during installation."
    Help please!
    Edit: I uninstalled iTunes.

    That's not the solution; it's just a test, which shows that bad data in your home folder is interfering with Safari.
    Quit Safari and move the following items to the Trash:
    Library/Caches/com.apple.Safari
    Library/Caches/Metadata/Safari
    Try again. If Safari still doesn’t work, quit it again and move the following file to the Desktop:
    Library/Safari/Bookmarks.plist
    Then move the following items to the Trash (some may not exist):
    Library/Preferences/com.apple.Safari.LSSharedFileList.plist
    Library/Preferences/com.apple.Safari.plist
    Library/Preferences/com.apple.Safari.RSS.plist
    Library/Safari
    Try again. This time Safari should perform normally, but your settings will be lost. Select File > Import Bookmarks from the Safari menu bar. Import from the bookmarks file you moved to the Desktop. Recreate the rest of your Safari settings. You can then delete the old bookmarks file.

  • Help - photos not showing

    I haven't edited any of my photos, yet although they show up as thumbnails (but not in 'Events') when I click on any, all that comes up is a huge exclamation mark.  Help please!

    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 08* library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

  • Search help is not showing list of objects available in ID

    Hi Everybody,
      I developed some business objects( Message Interfaces ) in Integration Repository and transported these objects from developement system to Quality system. After successful transportation i am able to see these objects in IR
    (Quality system) also. While doing configuration in Integration Directory of Quality System, i need to assign this Messge Interface to one of Business service. We all know that we will assign this Message Interface by using search help at Receiver/Sender level in Business service. But here in the search help i am not able to see my Message interface which actually exists in Integration Repository.
    I have tried out by clearing cache and make sure that the object is active, even then also i am not able see my message interface in search help.
    So, please help me if any one gets this situation earlier and how to resolve this?

    Hi Vijay,
    Did you check the cache notifications in IR?
    Refresh Cache using browser..
    http://<xiserver>:j2eeport/CPACache/refresh?mode=full
    When you go to SXI_CACHE in QA server . Click on Mappings on the left hand side and see if the mappings are available in cache.
    Regards,
    Sumit

Maybe you are looking for