Search help is not showing list of objects available in ID

Hi Everybody,
I developed some business objects( Message Interfaces ) in Integration Repository and transported these objects from developement system to Quality system. After successful transportation i am able to see these objects in IR
(Quality system) also. While doing configuration in Integration Directory of Quality System, i need to assign this Messge Interface to one of Business service. We all know that we will assign this Message Interface by using search help at Receiver/Sender level in Business service. But here in the search help i am not able to see my Message interface which actually exists in Integration Repository.
I have tried out by clearing cache and make sure that the object is active, even then also i am not able see my message interface in search help.
So, please help me if any one gets this situation earlier and how to resolve this?

Hi Vijay,
Did you check the cache notifications in IR?
Refresh Cache using browser..
http://<xiserver>:j2eeport/CPACache/refresh?mode=full
When you go to SXI_CACHE in QA server . Click on Mappings on the left hand side and see if the mappings are available in cache.
Regards,
Sumit

Similar Messages

Search help is not working

Hi All,
when am trying to search some ids using search help it is showing all ids.
For Ex: i want to search which ids starts with 'A', am give 'A*' but it is showing all ids.
Thanks in Advance

{FUNCTION /VIRSA/ZVIRFFOWNER.
""Local interface:
*" TABLES
*"      SHLP_TAB TYPE SHLP_DESCR_TAB_T
*"      RECORD_TAB STRUCTURE SEAHLPRES
*" CHANGING
*"     REFERENCE(SHLP) TYPE SHLP_DESCR_T
*"     REFERENCE(CALLCONTROL) LIKE DDSHF4CTRL STRUCTURE DDSHF4CTRL
EXIT immediately, if you do not want to handle this step
IF CALLCONTROL-STEP <> 'SELONE' AND
     CALLCONTROL-STEP <> 'SELECT' AND
     " AND SO ON
     CALLCONTROL-STEP <> 'DISP'.
    EXIT.
ENDIF.
STEP SELONE (Select one of the elementary searchhelps)
This step is only called for collective searchhelps. It may be used
to reduce the amount of elementary searchhelps given in SHLP_TAB.
The compound searchhelp is given in SHLP.
If you do not change CALLCONTROL-STEP, the next step is the
dialog, to select one of the elementary searchhelps.
If you want to skip this dialog, you have to return the selected
elementary searchhelp in SHLP and to change CALLCONTROL-STEP to
either to 'PRESEL' or to 'SELECT'.
IF CALLCONTROL-STEP = 'SELONE'.
PERFORM SELONE .........
    EXIT.
ENDIF.
STEP PRESEL (Enter selection conditions)
This step allows you, to influence the selection conditions either
before they are displayed or in order to skip the dialog completely.
If you want to skip the dialog, you should change CALLCONTROL-STEP
to 'SELECT'.
Normaly only SHLP-SELOPT should be changed in this step.
IF CALLCONTROL-STEP = 'PRESEL'.
PERFORM PRESEL ..........
    EXIT.
ENDIF.
STEP SELECT    (Select values)
This step may be used to overtake the data selection completely.
To skip the standard seletion, you should return 'DISP' as following
step in CALLCONTROL-STEP.
Normally RECORD_TAB should be filled after this step.
Standard function module F4UT_RESULTS_MAP may be very helpfull in this
step.
IF CALLCONTROL-STEP = 'SELECT'.
    EXIT. "Don't process STEP DISP additionally in this call.
ENDIF.
STEP DISP     (Display values)
This step is called, before the selected data is displayed.
You can e.g. modify or reduce the data in RECORD_TAB
according to the users authority.
If you want to get the standard display dialog afterwards, you
should not change CALLCONTROL-STEP.
If you want to overtake the dialog on you own, you must return
the following values in CALLCONTROL-STEP:
- "RETURN" if one line was selected. The selected line must be
the only record left in RECORD_TAB. The corresponding fields of
this line are entered into the screen.
- "EXIT" if the values request should be aborted
- "PRESEL" if you want to return to the selection dialog
Standard function modules F4UT_PARAMETER_VALUE_GET and
F4UT_PARAMETER_RESULTS_PUT may be very helpfull in this step.
IF CALLCONTROL-STEP = 'DISP'.
PERFORM AUTHORITY_CHECK TABLES RECORD_TAB SHLP_TAB
                          CHANGING SHLP CALLCONTROL.
    data: begin of i_idowner,
            zvirffid like /virsa/zvirffids-zvirffid,
            zvirffowner like /VIRSA/zvirffids-zvirffowner,
          end of i_idowner.
    data: wa_shlp TYPE SHLP_DESCR_T,
          iface like DDSHIFACE occurs 0 with header line.
   authority-check object 'GRCFF_0002' id 'YACTVT' field 'OWNR'.
   if sy-subrc = 0.
    select distinct zvirffowner into i_idowner from
       /VIRSA/ZVIRFFIDS.
      record_tab = i_idowner.
      append record_tab.
      clear: record_tab, i_idowner.
    endselect.
   else.
     select distinct zvirffrole into i_rolemonapvr from
        /VIRSA/ZFFROLES.
        where zvirffowner = sy-uname.
       record_tab = i_rolemonapvr.
       append record_tab.
       clear: record_tab, i_rolemonapvr.
     endselect.
endif.
    EXIT.
ENDIF.
ENDFUNCTION.}

Ship to party search help address not display

Hi,
Using 'Edit internal address' We added one plant address, and the address no also generated. plant having several address.
But when we creating shopping cart, trying to select the ship to address from the search help, address not displaying in the list.
even we tried adding this address in the attributes as delivary address also .but the address not displaying in ship to party search help.
If any one faced this problem let us know how to proceed.
Thanks in advance,
prasad.s

it is strange .
whatever you have defaulted ship to adress has to come.
did you maintain at position level and make ensure that you have really inherited.
FM bbp_read_attributes
for your user execute and make ensure that you have inheited ship to address
when you create ship to address . did you check this box Ship-to Address in Use Address as:
muthu

Search help is not triggering second time in interactive form

Hi,
I have online interactive form in WDABAP. And I have few search helps in the form, If i click on any search help it is opening and I can select the value and the same is populated to the field. But if i click it again search help is not opening.
Only one time it is triggering and also after I clicked one serach help, other search helps also dont work.
Can some one guide me? Is it something to do with scripting or any other configuration?
Now Im using ALD7.1 and Reader version is 8.1.0.
did any one faced this problem? Really appreciate if some one can help me on this.
Regards,
Ravi

hi,
The following code is generated in the preopen event of the valuehelp.
// DO NOT MODIFY THE CODE BEYOND THIS POINT - 710.20061129084151.349066.349066 - ValueHelpDropDown.xfo
                   var processingValueHelp = ContainerFoundation_JS.getGlobalValue(event.target, "processingValueHelp");
                   if(processingValueHelp == false) {
                       ContainerFoundation_JS.setGlobalValue(event.target, "processingValueHelp", true);
                       this.rawValue = "";
                       this.clearItems();
                       ContainerFoundation_JS.SendMessageToContainer(event.target,
                                                                     "valueHelp",
                                                                     this.dataNode.somExpression.replace(/(xfa.?\.)(datasets.?\.)(data.*?\.)/, ""),
                                                                     this.rawValue,
                                                                     event.target.mouseX,
                                                                  event.target.mouseY);
                   // END OF DO NOT MODIFY
I have tried placing this code in click event instead of preopen.But still no use. Can we make changes to this code? Can some one give me some idea what changes need to be done..
Regards,
Ravi

With input disabled field search help is not working.

Hi Web dynpro abap Gurus
Please help me on below requirement.
If i make a input field disable then the attach search help is not working. Is there is any way by which
I can make input field disabled and search help will also work for this field.
I really need help on this, Please help me.
Many thanks in advance.
Sandeep Sharma
09971995045

Hi
I dont think that a field can be disabled and allows to choose data using f4 simultaneously. you can enable the field and allow the user to select whatever he/she wants.
Then in any action like on press of save or submit button which the user will trigger after entering the values, get the value entered by the user in that perticular field and fire a query on the table/view, which you have used as selection method of your search help, it help is coming from data element then look for check table in domain. if sy-subrc comes 0 than go ahead else give error that value selected is modified.
Thanks
Vishal

Search Box is not showing in custom master page

Hi
I am using "Office 365 Enterprise E3 Trial"
and have created a custom master page for my public SharePoint
site .
I have added Search snippet from the snippet gallery but the search
box is not showing in the master page .I am not able to find the reasons .

My Master page code is like bellow
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"[]>
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882">
<head>
<meta http-equiv="X-UA-Compatible" content="IE=10" xmlns="" />




<meta name="GENERATOR" content="Microsoft SharePoint" xmlns="" />
<meta http-equiv="Content-type" content="text/html; charset=utf-8" xmlns="" />
<meta http-equiv="Expires" content="0" xmlns="" />













































<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

<link href="style1.css" rel="stylesheet" type="text/css" />
<link href="slider.css" rel="stylesheet" type="text/css" />


<script type="text/javascript" src="https://purplechannelltd-public.sharepoint.com/_catalogs/masterpage/DNV/js/jquery-1.10.2.min.js">//<![CDATA[
//]]>
</script>
<script type="text/javascript" src="js/custom.js">//<![CDATA[
//]]>
</script>
<script type="text/javascript" src="js/bjqs-1.3.min.js">//<![CDATA[
//]]>
</script>
<script type="text/javascript" src="/Documents/clients_hover.js">//<![CDATA[
//]]>
</script>
<script type="text/javascript" src="/Documents/jquery.backgroundSize.js">//<![CDATA[
//]]>
</script>
<script type="text/javascript" class="secret-source">//<![CDATA[
jQuery(document).ready(function($) {
$('#banner-fade').bjqs({
width : 1600,
height : 377,
responsive : true
//]]>
</script>
<script type="text/javascript">//<![CDATA[
$(document).ready(function () {
if((window.location.href=="https://purplechannelltd-public.sharepoint.com/")||(window.location.href=="http://purplechannelltd-public.sharepoint.com/")||(window.location.href=="http://purplechannelltd-public.sharepoint.com/Pages/default.aspx")||(window.location.href=="https://purplechannelltd-public.sharepoint.com/Pages/default.aspx")
$("#banner-fade").removeAttr("style");
$("#BannerLine").removeAttr("style");
$("#trBreadCrumb").css("display","none");
$("#trNewsAndTraningHome").removeAttr("style");
$("#trNewsOnly").css("display","none");
else
$("#banner-fade").css("display","none");
$("#BannerLine").css("display","none");
$("#trBreadCrumb").removeAttr("style");
$("#trNewsAndTraningHome").css("display","none");
$("#trNewsOnly").removeAttr("style");
if((window.location.href=="http://purplechannelltd-public.sharepoint.com/Pages/Services.aspx")||(window.location.href=="http://purplechannelltd-public.sharepoint.com/Pages/Key-issues.aspx")||(window.location.href=="http://purplechannelltd-public.sharepoint.com/Pages/Industries.aspx")||(window.location.href=="http://purplechannelltd-public.sharepoint.com/Pages/Clients.aspx")||(window.location.href=="http://purplechannelltd-public.sharepoint.com/Pages/About-us.aspx")
||(window.location.href=="http://purplechannelltd-public.sharepoint.com/Pages/walking-the-talk.aspx")||(window.location.href=="http://purplechannelltd-public.sharepoint.com/Pages/what-is-sustainability.aspx")||(window.location.href=="http://purplechannelltd-public.sharepoint.com/Pages/our-team.aspx")||(window.location.href=="http://purplechannelltd-public.sharepoint.com/Pages/assurance-code-of-conduct.aspx")
||(window.location.href=="http://purplechannelltd-public.sharepoint.com/Pages/Contact-us-EMEA.aspx")||(window.location.href=="http://purplechannelltd-public.sharepoint.com/Pages/Contact-us-asia-pacific.aspx")||(window.location.href=="http://purplechannelltd-public.sharepoint.com/Pages/Contact-us-Americas.aspx")){
$("#banner-fade").css("display","none");
$("#BannerLine").css("display","none");
$("#trBreadCrumb").css("display","none");
$("#trNewsAndTraningHome").removeAttr("style");
$("#trNewsOnly").css("display","none");
if (window.location.href.indexOf("dnv-gl-launches-new-global-brand") >= 0 ||window.location.href.indexOf("how-future-proof-your-business") >= 0||window.location.href.indexOf("human-rights-time-walk-talk") >= 0 )
$("#trNewsOnly").css("display","none");
if($("#trNewsOnly").html().indexOf("Web Part Error:")>0)
$("#trNewsOnly").css("display","none");
if($("#trBreadCrumb").html().indexOf("Web Part Error:")>0)
$("#trBreadCrumb").css("display","none");
//]]>
</script>

</head>
<body>




<div id="TurnOnAccessibility" style="display:none" class="s4-notdlg noindex" xmlns="">
<a id="linkTurnOnAcc" href="#" class="ms-accessible ms-acc-button" onclick="SetIsAccessibilityFeatureEnabled(true);UpdateAccessibilityUI();document.getElementById('linkTurnOffAcc').focus();return false;">


</a>
</div>
<div id="TurnOffAccessibility" style="display:none" class="s4-notdlg noindex" xmlns="">
<a id="linkTurnOffAcc" href="#" class="ms-accessible ms-acc-button" onclick="SetIsAccessibilityFeatureEnabled(false);UpdateAccessibilityUI();document.getElementById('linkTurnOnAcc').focus();return false;">


</a>
</div>

<div id="ms-designer-ribbon" xmlns="">

<div class="DefaultContentBlock" style="background:rgb(0, 114, 198); color:white; width:100%; padding:8px; height:64px; overflow:hidden;">The SharePoint
ribbon will be here when your file is either previewed on or applied to your site.</div>
</div>
<div id="s4-workspace" xmlns="">
<div id="s4-bodyContainer">
<table width="100%" border="0" align="center" cellpadding="0" cellspacing="0" xmlns="http://www.w3.org/1999/xhtml">
<tr>
<td align="left" valign="top" class="headerLeft">
</td>
<td width="886" align="left" valign="top">
<div class="header">
<a href="https://purplechannelltd-public.sharepoint.com/">
<img src="images/logo.gif" width="189" height="109" alt="Logo" />
</a>
<h1>Sustainability Advisory Services
</h1>
<ul id="topNav">
<li>
<a href="http://purplechannelltd-public.sharepoint.com/Pages/About-us.aspx">About us
</a>
</li>
<li>
<a href="https://purplechannelltd-public.sharepoint.com/Pages/News.aspx">News
</a>
</li>
<li>
<a href="http://purplechannelltd-public.sharepoint.com/Pages/Contact-us.aspx">Contact us
</a>
</li>
</ul>

<div style="right: 0px; ; color: rgb(0, 51, 153); font-weight: bold; top: 25px;">
BUSINESS ASSURANCE
</div>

<div class="twitterSec">RT @damidefelice: @edgeoftheocean Anna Turrel shows how @TwoTomorrows assesses corporate human right
</div>





<div id="search">
<div data-name="SearchBox">



<div class="ms-webpart-chrome ms-webpart-chrome-fullWidth
"><div WebPartID="00000000-0000-0000-0000-000000000000" HasPers="true" id="WebPart" width="100%" class="ms-WPBody noindex " OnlyForMePart="true" allowDelete="false" style=""><div componentid="ctl00_SmallSearchInputBox_csr" id="ctl00_SmallSearchInputBox_csr"><div
id="SearchBox" name="Control"><div class="ms-srch-sb ms-srch-sb-border" id="ctl00_SmallSearchInputBox_csr_sboxdiv"><input type="text" value="Search..." maxlength="2048" accessKey="S" title="Search..." id="ctl00_SmallSearchInputBox_csr_sbox" autocomplete="off"
autocorrect="off" onkeypress="EnsureScriptFunc('Search.ClientControls.js', 'Srch.U', function() {if (Srch.U.isEnterKey(String.fromCharCode(event.keyCode))) {$find('ctl00_SmallSearchInputBox_csr').search($get('ctl00_SmallSearchInputBox_csr_sbox').value);return
Srch.U.cancelEvent(event);}})" onkeydown="EnsureScriptFunc('Search.ClientControls.js', 'Srch.U', function() {var ctl = $find('ctl00_SmallSearchInputBox_csr');ctl.activateDefaultQuerySuggestionBehavior();})" onfocus="EnsureScriptFunc('Search.ClientControls.js',
'Srch.U', function() {var ctl = $find('ctl00_SmallSearchInputBox_csr');ctl.hidePrompt();ctl.setBorder(true);})" onblur="EnsureScriptFunc('Search.ClientControls.js', 'Srch.U', function() {var ctl = $find('ctl00_SmallSearchInputBox_csr'); if (ctl){ ctl.showPrompt();
ctl.setBorder(false);}})" class="ms-textSmall ms-srch-sb-prompt ms-helperText" ><a title="Search" class="ms-srch-sb-searchLink" id="ctl00_SmallSearchInputBox_csr_SearchLink" onclick="EnsureScriptFunc('Search.ClientControls.js', 'Srch.U', function() {$find('ctl00_SmallSearchInputBox_csr').search($get('ctl00_SmallSearchInputBox_csr_sbox').value);})"
href="javascript: {}"><img src="https://purplechannelltd-public.sharepoint.com/_catalogs/theme/Themed/E97CFE0A/searchresultui-61174269.themedpng?ctag=7" class="ms-srch-sb-searchImg" id="searchImg" alt="Search" ></a></div></div></div><noscript><div
id="ctl00_SmallSearchInputBox_noscript">It looks like your browser does not have JavaScript enabled. Please turn on JavaScript and try again.</div></noscript><div id="ctl00_SmallSearchInputBox"></div><div class="ms-clear"></div></div></div>


</div>
</div>

</div>
</td>

Search help does not work when view context is mapped to comp context

Hello,
I am trying to display search help for an input field of a view. The context to which the input field is bound is a node with an attribute. I have specified Dictionary Search help for the attribute. Now when I execute the application, I am able to get the search help in the screen.
But, I need to map this view context node to its comp controller context. When I do the mapping, the search help does not appear when executed.
It would be a great help if someone can point out an answer to this.
Thanks,
Maya

Hi Maya
Follow these steps:
1.Delete the context node/attribute which is bound to search help from the View.
2.Now Save metadata.
3.Perform Context mapping again .In the Edit Context Mapping window drag the node/attribute FROM RIGHT PANE TO LEFT PANE and select the entry.
4.Delete the Input Field from the view.
5.Save again
6.Close NWDS and reopen it.
7.Create input field again and bind it to the context element.
Hope this solves the problem.
Regards
Ananda

Default search engine will not show

after the update to 35.0 yesterday my search engines wil not show.
In the add search engines they show, but not on the search bar.
See images for example.
Is this a bug, or am I doing something wrong?

hello imans314, the multiple engines should appear once you start typing in the searchbar. if you just hit enter after the search term it will go to your default engine...

CRM Business Object BUS1006005 Not Showing In LSMW Object List

I am trying to use Bus. Object BUS1006005 in an LSMW using BAPI. I noticed that I need to generate an ALE interface for the object before LSMW can use it.. Can someone please help me with this? When I drop-down on Business Object in LSMW Attributes, this object does not show on the list, however I noticed that Bus. Objects with ALE Message Types do show up.
Kind Regards,
Jason

IDOC Type:It is the Structure and format of the data that is to be exchanged
see the EDBAS table
MESSAGE TYPE: Determines and Processes the various outputs associated with an application document . Mostly used in SD and MM modules
See the EDMSG table
see the link for LSMW-IDOC
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
LSMW-BAPI
Step-by-Step Guide for using BAPI in LSMW
Note! The screen prints in this article are from ECC 5.0. They may differ slightly in other versions.
Introduction:
This document details the usage of BAPI in LSMW. We have used the example of migration of the purchase order data into SAP.
Pre-requisites:
It is assumed that the reader of this article has the minimum knowledge required on the Business Object, BAPI, Message Types and IDoc Types.
Step-by-Step Procedure:
Details of the BAPI used in this scenario:
Business Object: BUS2012
Method: CreateFromData
Details of Message Type and Basic IDoc Type:
Message Type: PORDCR
Basic IDoc Type: PORDCR02
Lets have a look at the BAPI first, before proceeding to the LSMW:
1. Go to Transaction BAPI
2. Click on Search Button
3. Enter the value BUS2012 and select Obj.type(Technical Object Name
4. Press ENTER
5. Following screen appears:
6. On the left side of the screen, Expand the PurchaseOrder.
7. Select PurchaseOrder and double-click on the same for details.
Building LSMW using BAPI:
1. Go to Transaction LSMW.
2. Enter the Project, Subproject and Object information and click on CREATE.
3. Enter the descriptions for Project, Subproject and Object.
4. Now select Settings à IDoc Inbound Processing
5. IDoc Inbound Processing screen appears. Enter the required details as shown below:
6. Click on Activate IDoc Inbound Processing.
7. Click on Yes when prompted for Activate IDoc Inbound?
8. Hit on Back to return to the main screen.
9. Click on Continue (F8). Following Screen appears:
10. Select the Step 1 Maintain Object Attributes and select Execute.
11. Select the radio button Business Object Method and enter the following details:
Business Object: BUS2012
Method: CreateFromData
Hit ENTER
12. Save and click on BACK button. Following information message is displayed.
13. Now select step 2 Maintain Source Structures and click Execute.
14. In this step, we need to maintain the source structure. In our example, lets consider the example of a file with 2 structures Head and Item data as shown below:
Click on Create and name the source structure as HEADERDATA. Now select HEADERDATA and click on Create again to create the child structure. Following popup appears:
Select Lower Level and click on Continue. Enter the Item data structure name.
Click Save and hit BACK button to go to the main screen.
15. Select step 3 Maintain Source Fields and hit execute.
16. Enter the fields as shown below:
17. Click SAVE and return to main screen.
18. Select step 4 Maintain Structure Relations and click Execute.
Select E1PORDCR and click on CREATE RelationShip. Following screen appears:
Select HEADERDATA and hit ENTER
Similarly do the same for the structure E1BPEKKOA, E1BPEKPOC and E1BPPEKET.
Click Save and return to main screen.
19. Select the step Maintain Field Mapping and Conversion Rules and click on execute. Maintain the Field Mapping as seen below:
20. Select step 7 Maintain Source Files and provide the link for the test file created. (Create a test file with the same structure as defined earlier).
Save and return to main screen.
21. Select the step Assign Files and click on Execute.
Assign the file provided to the source structure. Here the same file is provided for both the structures.
Save and return to the main screen.
22. Select the step Read Data and click on Execute.
Click on Execute.
Return to the main screen.
23. Select the step Display read data and click on execute.
Click on the structure name to get the field level values.
24. Return to main screen and now select Convert Data.
25. Return to the main screen and select Display Converted data.
26. Return to main screen and select Start IDoc generation.
27. Now select the step Start IDoc Processing on the main screen.
28. Return to main screen and click on Create IDoc overview. Here the data record and status records of the IDoc could be viewed
It is given in screen shot.
http://www.****************
LSMW-IDOC
see this and do accordingly
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
Go through the steps
Hi please go through the following steps for IDOC method
Step 1. Run the transaction ( /nlsmw ) you will reach to the screen
Here you have to specify
Project : 060_BUS_TRANS
Subproject : SERVICE_TICKET
Object : SRV_TICKET_ZSVT
click on the execute button .you will reach the screen :
The screen shows the 15 steps to Run the lsmw
Step 2) select the first step ( Maintain object attributes) and click the execute button.After clicking on the execute button you will reach at. the screen
Here you have to specify ( MEssage type and basic type)
click on the BACK button
Step 3) select the 2nd step ( Maintain source structures) and click the execute button
Here you have to specify the source structures.
Step 4) Select the 3rd step ( Maintain source fields) and click on the execute button :
Here you have to specify the fields present in the source structure
Step 5) select the 4th step ( Maintain structure relationship ) and click on the execute button :
Here you have to specify relationship between source and target structures
Step 6) select the 5th step ( Maintain field mapping ) and click on the exécute button :
Here you have to map the fields between source and target structure. Also you have to apply conversion rules here if any
STEP 7) select the 6th step and click on the exécute button
Here you can define any fixed value or user define routines
Step 8) select the 7th step ( Specify files) and click on the exécute button :
At This screen we have to specify the files for This we should be in change mode .So please click on the button shown in the above screen. After clicking on This button you will be in change mode and will be able to specify the files :
Step 9) select the 8th step ( Assign files) and click on the exécute button
For assigning files yoy should be in change mode do the same thing click on the button as shown in the above screen :
Then assign the files to different structures.
Step 10 ) select the 9th step ( Read Data) and click on the exécute button :
After clicking on the exécute button you will reach to the screen
Again click on the exécute button . After clicking on the exécute button you will reach to the next screen
Here you will see data is read.
Step 11) select the 10th step ( Display read data) and click on the exécute button :
Here you can see your test data present in test files assign to source sturcture
Step 12 ) select the 11th step ( Convert data) and click on the exécute button :
After clicking on the exécute button you will reach to the screen
Click on the exécute button as shown on the : After click on the exécute button you will reach to the next screen
Data is converted
Step 12th ( Display converted data is same as Display read data )
Step 13 ) select the 13th step ( Start idoc generation) and click on the exécute
button :
At this step Idoc is generated using converted data
Step 14) select the 14th step ( Start idoc processing ) and click on the exécute button :
After clicking on the exécute button you will reach to the screen :
And then click on the exécute button : After clicking on the exécute button you will reach to the final processive screen
If data is processed correctly you will see ( 53 Status message with green sign)
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
Step-by-Step Guide for using BAPI in LSMW
Note! The screen prints in this article are from ECC 5.0. They may differ slightly in other versions.
Introduction:
This document details the usage of BAPI in LSMW. We have used the example of migration of the purchase order data into SAP.
Pre-requisites:
It is assumed that the reader of this article has the minimum knowledge required on the Business Object, BAPI, Message Types and IDoc Types.
Step-by-Step Procedure:
Details of the BAPI used in this scenario:
Business Object: BUS2012
Method: CreateFromData
Details of Message Type and Basic IDoc Type:
Message Type: PORDCR
Basic IDoc Type: PORDCR02
Lets have a look at the BAPI first, before proceeding to the LSMW:
1. Go to Transaction BAPI
2. Click on Search Button
3. Enter the value BUS2012 and select Obj.type(Technical Object Name
4. Press ENTER
5. Following screen appears:
6. On the left side of the screen, Expand the PurchaseOrder.
7. Select PurchaseOrder and double-click on the same for details.
Building LSMW using BAPI:
1. Go to Transaction LSMW.
2. Enter the Project, Subproject and Object information and click on CREATE.
3. Enter the descriptions for Project, Subproject and Object as prompted.
4. Now select Settings à IDoc Inbound Processing
5. IDoc Inbound Processing screen appears. Enter the required details as shown below:
6. Click on Activate IDoc Inbound Processing.
7. Click on Yes when prompted for Activate IDoc Inbound?
8. Hit on Back to return to the main screen.
9. Click on Continue (F8). Following Screen appears:
10. Select the Step 1 Maintain Object Attributes and select Execute.
11. Select the radio button Business Object Method and enter the following details:
Business Object: BUS2012
Method: CreateFromData
Hit ENTER
12. Save and click on BACK button. Following information message is displayed.
13. Now select step 2 Maintain Source Structures and click Execute.
14. In this step, we need to maintain the source structure. In our example, lets consider the example of a file with 2 structures Head and Item data as shown below:
Click on Create and name the source structure as HEADERDATA. Now select HEADERDATA and click on Create again to create the child structure. Following popup appears:
Select Lower Level and click on Continue. Enter the Item data structure name.
Click Save and hit BACK button to go to the main screen.
15. Select step 3 Maintain Source Fields and hit execute.
16. Enter the fields as shown below:
17. Click SAVE and return to main screen.
18. Select step 4 Maintain Structure Relations and click Execute.
Select E1PORDCR and click on CREATE RelationShip. Following screen appears:
Select HEADERDATA and hit ENTER
Similarly do the same for the structure E1BPEKKOA, E1BPEKPOC and E1BPPEKET.
Click Save and return to main screen.
19. Select the step Maintain Field Mapping and Conversion Rules and click on execute. Maintain the Field Mapping as seen below:
20. Select step 7 Maintain Source Files and provide the link for the test file created. (Create a test file with the same structure as defined earlier).
Save and return to main screen.
21. Select the step Assign Files and click on Execute.
Assign the file provided to the source structure. Here the same file is provided for both the structures.
Save and return to the main screen.
22. Select the step Read Data and click on Execute.
Click on Execute.
Return to the main screen.
23. Select the step Display read data and click on execute.
Click on the structure name to get the field level values.
24. Return to main screen and now select Convert Data.
25. Return to the main screen and select Display Converted data.
26. Return to main screen and select Start IDoc generation.
27. Now select the step Start IDoc Processing on the main screen.
28. Return to main screen and click on Create IDoc overview. Here the data record and status records of the IDoc could be viewed:
Please Go through these Links ,
BAPI with LSMW
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI
For document on using BAPI with LSMW, I suggest you to visit:
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
http://myweb.dal.ca/hchinni/sap/lsmw_home.htm
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
bapi-idoc:
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
Thanks
Naveen khan

Choose an entry in Search help and not in its input field

Hi to all,
In my application I have a field with a search help.
I want that this field only can be modified using a search help and this field can't be modified directly writing in this field.
Is similar to transaction se63 - Translation - Abap objects - Short texts - OTR - Source language
I have created an example with the field SCARR-CARRID but this field can be modified with search help and directly, or this field can't be modified.
In my application I have done the following:
-> Screen painter (layout):
Name: SCARR-CARRID
Input Field: not marked
Output Field: marked
Possible entries: marked
Possible entries keys: 2
-> Flow logic:
PROCESS BEFORE OUTPUT.
MODULE IMPORT_DATA_0001.
PROCESS AFTER INPUT.
MODULE EXPORT_DATA_0001.
PROCESS ON VALUE-REQUEST.
FIELD SCARR-CARRID MODULE listbox.
PROCESS ON HELP-REQUEST.
MODULE listbox INPUT.
TYPES:
BEGIN OF VRM_VALUE,
KEY(40) TYPE C,
TEXT(80) TYPE C,
END OF VRM_VALUE,
VRM_VALUES TYPE VRM_VALUE OCCURS 0,
VRM_ID TYPE VRM_VALUE-TEXT,
VRM_IDS TYPE VRM_ID OCCURS 0.
DATA: name TYPE vrm_id,
list TYPE vrm_values,
value LIKE LINE OF list.
CHECK list[] IS INITIAL.
name = 'SCARR-CARRID'.
SELECT carrid CARRNAME FROM SCARR
INTO (value-key,value-text).
APPEND value TO list.
ENDSELECT.
SORT list BY text.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = name
values = list.
ENDMODULE. " LISTBOX INPUT
How can i solve this problem?
Thanks a lot.

Hi Jey:
I have tried this:
MODULE listbox INPUT.
TYPES: BEGIN OF vrm_value,
           key(40) TYPE c,
           text(80) TYPE c,
         END OF vrm_value,
vrm_values TYPE TABLE OF vrm_value,
vrm_id     TYPE vrm_value-text,
vrm_ids    TYPE TABLE OF vrm_id.
DATA: name       TYPE vrm_id,
        list       TYPE TABLE OF vrm_value WITH HEADER LINE,
        poplist    TYPE TABLE OF spopli WITH HEADER LINE,
        popanswer TYPE c,
        popindex   TYPE i,
        value      TYPE vrm_value,
        lt_dyntab TYPE TABLE OF dynpread WITH HEADER LINE,
        dynpprog   TYPE syrepid VALUE 'SAPMZxxxx',           "Enter your dynpro here
        dynpnr     TYPE sydynnr VALUE '0100',          "Enter your screen number here
        dynpfield TYPE help_info-dynprofld VALUE 'SCARR-CARRID'.
IF list[] IS INITIAL.
    name = 'SCARR-CARRID'.
    SELECT carrid carrname FROM scarr
    INTO (value-key,value-text).
      APPEND value TO list.
      poplist-varoption = value-text.
      APPEND poplist.
    ENDSELECT.
ENDIF.
Use some method to display a list for selection
Here is a simplified way of doing it but there are
much more sofisiticated methods.
CALL FUNCTION 'POPUP_TO_DECIDE_LIST'
       EXPORTING
            textline1          = 'Select an entry'
            titel              = 'Selection'
       IMPORTING
            answer             = popanswer
       TABLES
            t_spopli           = poplist
       EXCEPTIONS
            not_enough_answers = 1
            too_much_answers   = 2
            too_much_marks     = 3
            OTHERS             = 4.
CHECK sy-subrc = 0.
CHECK popanswer NE 'A'.
popindex = popanswer.
READ TABLE list INDEX popindex.
IF sy-subrc = 0.
    lt_dyntab-fieldvalue = list-key.
ENDIF.
Update the screen field with the selected value
lt_dyntab-fieldname = dynpfield.
APPEND lt_dyntab.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
       EXPORTING
            dyname               = dynpprog
            dynumb               = dynpnr
       TABLES
            dynpfields           = lt_dyntab
       EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription = 6
            undefind_error       = 7
            OTHERS               = 8.
ENDMODULE. " LISTBOX INPUT
I think that there is a error that I have not seen because I put a breakpoint at the beginning of your code and the execution doesn`t stop.
Now I execute the dynpro and appears my field 'SCARR-CARRID' and I can't choose a value and I can write in input field.
Can you help me?
Thanks a lot.

Search Help is not working in PCUI

Hi All,
We are working on CRM 5.0
we have given Seach help for City depend upon Region
This search help is working in SAP-GUI System but
it is not working on PCUI Screen And showing No entry found,
plz help me...
i ll give reward points for helpful ans
Thanks & Regards,
ganesh

Hi,
Is a search help program attached for the field group (to which this PC-UI field belongs) in transaction CRMC_BLUEPRINT?
Regards,
Annu

Photoshop is not showing up in my available programs list.

Ever since I switched over to The Cloud I have noticed when trying to open with my photoshop is not showing up on the list or the sub lists, when I try to open it under adobe I cannot find the ext file to link it with .. the program seems to be working other than that...
Respectfully,
Terry Loomis

Hello! I will guess that you are using a PC (I guess that by "list" you mean the Start menu)
Usually, Adobe software are listed under their Creative Suite folders, you can try to look if there is a creative cloud. Also, a search for Photoshop.exe should let you see where it is located, and you should then be able to add a shortcut to your start menu.
You did not tell either what version of windows you are using, so here are instructions for 7: http://www.sevenforums.com/tutorials/296-start-menu-all-programs-add-delete-shortcuts.html
To get quick answers and relevant to your question, remember to give pertinent information, such as your operating system, your version of Photoshop.

Search on Keyword not showing correct results

I tagged all 5k of my images keywords. Basically people's names of who is in the image.
I then ran a search by person's name, but a lot of the results do not contain the keyword I searched for.
In the results I checked the metadata tab under Keywords: and my search term is not listed.
Am I missing something?
thanks

Yes, I added the keywords using 'Batch Change....'
The Keyword HUD shows all my keywords listed right there at the root. ie. My keywords are not under any other keywords. ie. iPhoto/Raw or Personal/Backyard
Ta

Help: Records not showing when cube is placed under the Multiporivider

Hi Experts,
I have a Cube called Bcube with char Plant,calm year/month, material and Key Figure, Pqty
When I generate a report on this Cube, everything looks fine and I see plants, year, etc in the report
There are 2 other cubes:
MCube also has char Plant,calyear/month, material and Key Figure: Pqty, Sqty, TQty, AQty
DCube also has same as BCube: with char Plant,calyear/month, material and Key Figure Pqty
When I place all three cubes under the multiprovider, the values from the BCube does not show up in reports
e.g. in a simple report such as
Row : Plant
Columns: Pqty, Sqty, TQty, AQty
In the Multiprovider, under the Indentification of Characteristics, I checked the boxes for all three cubes whenever the same charactertic in all cubes showed up for identification: e.g..
InfoProvider InfoObject
Bcube----
Plant
MCube-------Plant
DCube -
Plant
and same for. e.g. 0Calyear
and same for Key Figures, e.g. I checked all 3 boxes for PQty which exists in each of the cubes
1. Why is my data for BCube not showing when reporting against the multiprovider?
2. what does it mean by checking the 3 boxes for Plant? and checking the 3 boxes for 0Calyear.
Thanks

Hi,
regarding your questions:
1. When I run listcube against the multiprovider, I only went to the output list to select the fields I needed in the output; then entered the particular cube e.g. BCube in the infoprovider field. That was it (NO other selection) and I got the described results I explained earlier. If you have a specific test for me to try, please let me know.
2. Please find the settings in both characteristics and key figures for all cubes in the MULTIPROVIDER maintenance screen:
Characteristic Assighment:
0calyear -- 3 boxes checked for BCube, DCube & MCube
Plant -- 3 boxes checked for BCube, DCube & MCube
0Material-- 3 boxes checked for BCube, DCube & MCube
Key Figure selection
PQty-- 3 boxes checked for BCube, DCube & MCube
Sqty --checked for DCube, this key fig is ONLY in DCube
TQty--checked for DCube, this key fig is ONLY in DCube
AQty--checked for DCube, this key fig is ONLY in DCube
I hope this helps you to guide me.
Or, were you referring to mappings in the transformations?
Thanks

Calendar Year variable is not showing listed values

Hi,
I have a query which I am running based on the standard variable ( 0CALYEAR ) input. When I run first time it shows the list of values in the selection editor and displays the result. But after executing when I am trying to change filter values in the output, it doesn't show list values as well if I enter manually, I am not getting the result. I am getting out put no data available....
I created new variables on 0CALYEAR info object, but same problem. My query structure is
In rows I just defined Calendar Year / Month ( so that I can get all months for that user entered Year ).
In Columns I defined one Key Figure.
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Mar 8, 2012 8:39 AM

Problem is resolved my self. Removed 0CALYEAR from Char Restrictions to Default.
Thanks
Ganesh Reddy.

Search help is not showing list of objects available in ID

Similar Messages

Maybe you are looking for