Need Java Code or Program to compare 2 XML files ???

Hi All,
I need Any java code snippet to compare 2 XML files? Please help me..
Thanks,
J.Kathir

Can you explain which possibilities you rejected while searching for that on the Internet? That may give us some insight into your actual requirements.

Similar Messages

I Need Java code for following Algorithm

* I Need Java code for following algorithm. Kindly any one help.
1. Read the contents (ideas and its corresponding scores) from two files named as 'a' and 'b'.
2. Stored the file 'a' contents in array a[].
3. Stored the file 'b' contents in array b[].
4. compare both files like
if(a.equals(b[j])
Writing the common idea and add the score from file 'a' and 'b'.
else
write the uncommon idea and its score..
For example :
Form Agents.txt
action,65
architecture,85
eco-,15
essay,30
form,85
form,85
link,40
tangent,25
Form Agents1.txt
Black holes,69
essay,78
Herewith i have above mentioned two files named as Form Agents and Form Agents1.
Form Agents has eight fields
Form Agents1 has two fields
--> 'essay' is common in two files, so store the idea 'essay' and add the score from Form Agents score is '30' and Form Agents1 has 78 (essay 108).
Finally it stores idea in another file with uncommon fields also.
Please help us.

We have tried with following code.
But we cant add the scores.
For Example:
Form Agents.txt --> has "essay,30"
Form Agents1.txt --> has "essay,78"
Result is: essay,108
Finally it stores idea in another file with uncommon fields also.
So Any one pls correct the following code.
try
DataOutputStream o1=new DataOutputStream(new
FileOutputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\CandidateResponses\\Form
Agents.txt"));
//Reading the contents of the files
BufferedReader br= new BufferedReader(new InputStreamReader(new
FileInputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\Ideological\\Form
Agents.txt")));
BufferedReader br1= new BufferedReader(new InputStreamReader(new
FileInputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\Related\\Form
Agents.txt")));
while((s=br.readLine())!=null)
s1+=s+"\n";
while((s2=br1.readLine())!=null)
s3+=s2+"\n";
int numTokens = 0;
StringTokenizer st = new StringTokenizer(s1);
String[] a = new String[10000];
String[] br_n=new String[10000];
int i=0;
while (st.hasMoreTokens())
s2 = st.nextToken();
a=s2.substring(0,s2.length()-3);
s6=s2.substring(s2.length()-2);
br_n[i]=s6;
i++;
numTokens++;
int numTokens1 = 0;
StringTokenizer st1 = new StringTokenizer (s3);
String[] b = new String[10000];
String[] br1_n=new String[1000];
int j=0;
while (st1.hasMoreTokens())
s4 = st1.nextToken();
b[j]=s4.substring(0,s4.length()-3);
s7=s4.substring(s4.length()-2);
br1_n[j]=s7;
j++;
numTokens1++;
int x=0;
for(int m=0;m<a.length;m++)
for(int n=0;n<b.length;n++)
if(a[m].equalsIgnoreCase(b[n])){
int sc=Integer.parseInt(br_n[m]);
int sc1=Integer.parseInt(br1_n[n]);
int score=sc+sc1;
o.writeBytes(a[m]+","+score+"\n");
break;
else
o.writeBytes(a[m]+","+br_n[m]+"\n");
break;
}catch(Exception e){}

I need java code to flatten an image

Hy! I need java code to flatten an image/sketch...someone can help me? Thanks to everybody!

http://java.sun.com/developer/technicalArticles/Security/JCE/ ?

I need java code for chating application

i need java code for chating application. plz help me

GANGINENI wrote:
i need java code for chating application. plz help meGIYF.
[http://today.java.net/pub/a/today/2006/10/05/instant-messaging-for-jabber-with-smack.html|http://today.java.net/pub/a/today/2006/10/05/instant-messaging-for-jabber-with-smack.html]
File under: lern2Google

Need java code to perform refresh button action using swings and awt

i need java code to perform refresh button action using swings and awt.please help me

Wait ! Noboby ? OK, I'll do it
public void onBtnAction ()
if (!fresh)
refresh ();
}Seriously, did you expect anyone to answer such a cryptic question ?

How to find out top 10 records from the R/3 using Java code (WD Program)

Hi Experts,
I have used Java Web Dynpro program to fetch records from the backend. Following code helps me and fetches record. As per the customer reqirement, we have to fetch only top 10 records (Actual Cost) from the backend. So I have to modify the Java code. How I can do so? Please help.
          wdContext.nodeGraphData().invalidate();
          IPublicCostcnt.IGraphDataElement categoryElement;
               for (int i = 0; i < wdContext.nodeItab_Final1().size(); i++) {
               categoryElement = wdContext.createGraphDataElement();
               categoryElement.setCostElement(""+ wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getDescription());
               categoryElement.setActualCost(wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getActual_Cost().toString());
               categoryElement.setPlannedCost(wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getPlan_Cost().toString());
               wdContext.nodeGraphData().addElement(categoryElement);
Regards,
Gary

Dear SDN Users,
This is how I resolved the issue.
1) Requested ABAPer to provide me sorted data. The data has been sorted in descending order of actual_cost.
2) After that I used following code. This resolved the issue.
     if (wdContext.nodeItab_Final1().size()>10){
     IPublicCostcnt.IGraphDataElement categoryElement;
          for (int i = 0; i < 10; i++) {
          categoryElement = wdContext.createGraphDataElement();
          categoryElement.setCostElement(""+ wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getDescription());
          categoryElement.setActualCost(wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getActual_Cost().toString());
          categoryElement.setPlannedCost(wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getPlan_Cost().toString());
          wdContext.nodeGraphData().addElement(categoryElement);
     if (wdContext.nodeItab_Final1().size()<=10){
     if (wdContext.nodeItab_Final1().size()>0){
     IPublicCostcnt.IGraphDataElement categoryElement;
          for (int i = 0; i < wdContext.nodeItab_Final1().size(); i++) {
          categoryElement = wdContext.createGraphDataElement();
          categoryElement.setCostElement(""+ wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getDescription());
          categoryElement.setActualCost(wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getActual_Cost().toString());
          categoryElement.setPlannedCost(wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getPlan_Cost().toString());
          wdContext.nodeGraphData().addElement(categoryElement);
Regards,
Gary

Need java code to make MySql Dump?

Do anybody know how to write java code to make MySql Dump. I am badly need of this code very urgently!, do any body here to help me!
Kindly help me out.

Urgency means two things:
- either your homework is late (do it yourself)
- or you have a deadline on your job (ask a co-worker)
Both isn't really making me want to answer your question. Your time isn't more valuable than that of the others.
And the big question is probably not "how to write the Java code" but "how to make a MySQL dump", Java or not. RTFM for that, and then use either MySQL or Runtime.exec.

Need JAVA code to create OIM ITresource-connection values are in a csv file

Hi,
Could any one plz help me with the java code used / tested before to create OIM IT resource dynamically, for the reference. IT resource parameter (connection) values in a .csv file, where in I've multiple environments.
Thanks,
Ramesh
Edited by: user13267745 on Aug 19, 2010 12:37 AM

Hi Gregg,
You can create one transformation from the DataStore to itself. In the "Technical" rules group, set 0RECORDMODE = 'X' (before image) or 'R' (reverse). Therefore, when you execute its corresponding DTP, all existing records shouldl be set to zero.
Then, as a second step, you can execute the DTP which is related to the transformation between the DataStore and the DataSource, thus loading the new records.
I hope this helps you.
Regards,
Maximiliano

URGENT : Need java code snippet to retrieve uniquemember values OID 11g API

Hi All,
We have a requirement to retrieve the uniquemember attribute values using OID 11g API. We are using labeleduri approach for dynamic groups and thus all the uniquemember values are created using dynamic groups.
When we are trying to retrieve the uniquemember values using Java code snippet, it is not returning the values. The strange thing is: The uniquemember values created using dynamic groups are not visible in ODSM OID console or JExplorer tool. However those values are visible in LDAP Browser v2.8.1 tool.
So can somebody throw light on this? Any pointers or sample code snippet to retrieve uniquemember values would be grateful.
Thanks
Mahendra.

Hi All,
We have a requirement to retrieve the uniquemember attribute values using OID 11g API. We are using labeleduri approach for dynamic groups and thus all the uniquemember values are created using dynamic groups.
When we are trying to retrieve the uniquemember values using Java code snippet, it is not returning the values. The strange thing is: The uniquemember values created using dynamic groups are not visible in ODSM OID console or JExplorer tool. However those values are visible in LDAP Browser v2.8.1 tool.
So can somebody throw light on this? Any pointers or sample code snippet to retrieve uniquemember values would be grateful.
Thanks
Mahendra.

Java through javawebstart not loading the xml file.-- need help

Dear All,
I am using jdk1.2.06, tomcat 5.25
In tomcat- inside webapps--mydirectory-- load.xml, applet1.java is present
in the browser applet1.java is called through javawebstart,
load.xml is loaded in applet1.java,where parsing is done in applet1.java,
but my problem is load.xml is not loaded in applet1.java through java webstart
Whether i want to do any pplicy file setting.. please clearly mention it..
thanks in advance

this is not the 'right' way to do it... but I think it should
work. I didn;t change the function name although I think its
supposed to be
getdetailsfrmXML instead of getetailsfrmXML
public function getEmpDetailsFrmXML() {
var xmlFileName:String = "emp.xml";
var employee_xml:XML = new XML();
employee_xml['externalScope']=this;
employee_xml.ignoreWhite = true;
employee_xml.load(xmlFileName);
employee_xml.onLoad = function(success) {
if (success) {
var xmlData = this;
this.externalScope.getetailsfrmXML.call(this.externalScope,xmlData);
} else {
trace("file not found");
public function getetailsfrmXML(details) {
trace(employee_xml.toString()+" mkmop");

Comparing XML files to XSLT

I have a XML version of a document, and an XSLT version that represents the SAME document.
How can I compare them and check that they are the same in the JAVA?
Thanks.

Abder-Rahman wrote:
How can I compare them and check that they are the same in the JAVA?How would you do it NOT in Java?
If you know that, then when you get stuck writing the Java code to implement the algorithm, as a more specific question.
If you don't know how to do it NOT in Java, then you need to figure that out before coming here or even thinking about Java.

Castor XSD Code Generation ANT task: mapping XML file?

Hello,
I am new to Castor and am using the Castor Code Generator ANT task to generate code from a XSD schema file.
I am using a binding XML file as well. One thing that I have a question about is the needed XML mapping file. I set the ‘*generateMapping*’ attribute to ‘true’ but have not found a mapping XML document.
Is there something I am doing wrong?
I would have attached the XSD files(some are imported), binding XML file and the ANT build.xml file in a .zip file to this post, but this forum does not have a facility for file attachments, but I can email them upon request.
Thanks in advance,
Andrew

Hi Andrew,
JAXB is the Java standard (JSR-222) for generating Java classes from an XML schema. Several implementations of this standard are available:
- Metro JAXB: The JAXB reference implementation, available in Java SE 6 and as part of GlassFish
- EclipseLink JAXB (MOXy): Part of EclipseLink, also available in Oracle TopLink
- JaxMe: Available from Apache
- Etc...
Castor is a proprietary XML binding tool. For Castor related questions you should visit the Castor website.
-Blaise

Need to prevent special character in generated XML file

Hello,
I am using E-business Suite 12.1.3 and XML version 5.6.3.
My XML file is ending up with a special character (a Latin capital letter U with circumflex) at the end, after the final closing tag.
Due to this the concurrent program that needs to output the XML is ending with warning.
My XML file is produced using a PL/SQL procedure, as follows (I've simplified it):
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<?xml version="1.0" encoding="UTF-8" ?>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<DOCS>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<LETTER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<EMP_NAME>Michaela Hart</EMP_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'</LETTER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'</DOCS>');
But when I run the concurrent request that creates the output then try to view the output in Internet Explorer I get the following error:
Invalid at the top level of the document. Error processing resource 'http://servername.domain...
</DOCS>
If I view the source of the page in Internet Explorer it shows a square after </DOCS> indicating the special character that has been added.
I checked this by looking at the output file in unix (cat -v o7766582.req) and it showed up the Latin U character.
I realise it could be to do with the character set I am using. I checked what we had on the server:
> echo $NLS_LANG
American_America.UTF8
I would have thought that corresponded with the XML declaration character set but I'm not sure.
Does anyone have any other ideas about why I have this special character, and how it could be removed?
Thanks in advance,
Hazel

Hi AlexAnd,
thanks very much for your reply.
I'm now unable to recreate the problem since dbms_xmlgen worked. If I switch back to my previous method it works fine!
I'm not sure your suggestion would help, as there were no special characters in the data, the special character was added after the last tag I output. I hard coded the data (as in my example) for testing purposes so there was no SQL in use and the special character was still added at the end of the XML output. But I will definitely give it a try if I get the problem again.
I had the idea that maybe I should have been using FND_FILE.PUT rather than FND_FILE.PUT_LINE but now the error is gone I can't tell if that would have solved the problem either.
I appreciate your input.
Regards
Hazel

Sample abap program to create XML files

Hi friends,
IS there is a sample abap program to create an XML file.
regards
kaushik

Hope the below code is helpfull.....
*& Report ZSAN_XML *
REPORT ZSAN_XML .
* Report ZPRUEBA_MML_13 *
* Export an internal table to XML document *
* NO BORRAR ESTE CODIGO *
*REPORT ZPRUEBA_MML_13.
* PANTALLA SELECCION *
PARAMETERS: GK_RUTA TYPE RLGRAP-FILENAME.
* PANTALLA SELECCION *
* TYPE TURNOS *
TYPES: BEGIN OF TURNOS,
LU LIKE T552A-TPR01,
MA LIKE T552A-TPR01,
MI LIKE T552A-TPR01,
JU LIKE T552A-TPR01,
VI LIKE T552A-TPR01,
SA LIKE T552A-TPR01,
DO LIKE T552A-TPR01,
END OF TURNOS.
* TYPE TURNOS *
* TYPE SOCIO *
TYPES: BEGIN OF SOCIO,
NUMERO LIKE PERNR-PERNR,
REPOSICION LIKE PA0050-ZAUVE,
NOMBRE LIKE PA0002-VORNA,
TURNOS TYPE TURNOS,
END OF SOCIO.
* TYPE SOCIO *
* ESTRUCTURA ACCESOS *
DATA: BEGIN OF ACCESOS OCCURS 0,
SOCIO TYPE SOCIO,
END OF ACCESOS.
* ESTRUCTURA ACCESOS *
* START OF SELECTION *
START-OF-SELECTION.
PERFORM LLENA_ACCESOS.
PERFORM DESCARGA_XML.
END-OF-SELECTION.
* END OF SELECTION *
* FORM LLENA_ACCESOS *
FORM LLENA_ACCESOS.
REFRESH ACCESOS.
CLEAR ACCESOS.
MOVE: '45050' TO ACCESOS-SOCIO-NUMERO,
'MOISES MORENO' TO ACCESOS-SOCIO-NOMBRE,
'0' TO ACCESOS-SOCIO-REPOSICION,
'T1' TO ACCESOS-SOCIO-TURNOS-LU,
'T2' TO ACCESOS-SOCIO-TURNOS-MA,
'T3' TO ACCESOS-SOCIO-TURNOS-MI,
'T4' TO ACCESOS-SOCIO-TURNOS-JU,
'T5' TO ACCESOS-SOCIO-TURNOS-VI,
'T6' TO ACCESOS-SOCIO-TURNOS-SA,
'T7' TO ACCESOS-SOCIO-TURNOS-DO.
APPEND ACCESOS.
CLEAR ACCESOS.
MOVE: '45051' TO ACCESOS-SOCIO-NUMERO,
'RUTH PEÑA' TO ACCESOS-SOCIO-NOMBRE,
'0' TO ACCESOS-SOCIO-REPOSICION,
'T1' TO ACCESOS-SOCIO-TURNOS-LU,
'T2' TO ACCESOS-SOCIO-TURNOS-MA,
'T3' TO ACCESOS-SOCIO-TURNOS-MI,
'T4' TO ACCESOS-SOCIO-TURNOS-JU,
'T5' TO ACCESOS-SOCIO-TURNOS-VI,
'T6' TO ACCESOS-SOCIO-TURNOS-SA,
'T7' TO ACCESOS-SOCIO-TURNOS-DO.
APPEND ACCESOS.
ENDFORM.
* FORM LLENA_ACCESOS *
* FORM DESCARGA_XML *
FORM DESCARGA_XML.
DATA: L_DOM TYPE REF TO IF_IXML_ELEMENT,
M_DOCUMENT TYPE REF TO IF_IXML_DOCUMENT,
G_IXML TYPE REF TO IF_IXML,
W_STRING TYPE XSTRING,
W_SIZE TYPE I,
W_RESULT TYPE I,
W_LINE TYPE STRING,
IT_XML TYPE DCXMLLINES,
S_XML LIKE LINE OF IT_XML,
W_RC LIKE SY-SUBRC.
DATA: XML TYPE DCXMLLINES.
DATA: RC TYPE SY-SUBRC,
BEGIN OF XML_TAB OCCURS 0,
D LIKE LINE OF XML,
END OF XML_TAB.
CLASS CL_IXML DEFINITION LOAD.
G_IXML = CL_IXML=>CREATE( ).
CHECK NOT G_IXML IS INITIAL.
M_DOCUMENT = G_IXML->CREATE_DOCUMENT( ).
CHECK NOT M_DOCUMENT IS INITIAL.
WRITE: / 'Converting DATA TO DOM 1:'.
CALL FUNCTION 'SDIXML_DATA_TO_DOM'
EXPORTING
NAME = 'ACCESOS'
DATAOBJECT = ACCESOS[]
IMPORTING
DATA_AS_DOM = L_DOM
CHANGING
DOCUMENT = M_DOCUMENT
EXCEPTIONS
ILLEGAL_NAME = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE 'Ok'.
ELSE.
WRITE: 'Err =',
SY-SUBRC.
ENDIF.
CHECK NOT L_DOM IS INITIAL.
W_RC = M_DOCUMENT->APPEND_CHILD( NEW_CHILD = L_DOM ).
IF W_RC IS INITIAL.
WRITE 'Ok'.
ELSE.
WRITE: 'Err =',
W_RC.
ENDIF.
CALL FUNCTION 'SDIXML_DOM_TO_XML'
EXPORTING
DOCUMENT = M_DOCUMENT
IMPORTING
XML_AS_STRING = W_STRING
SIZE = W_SIZE
TABLES
XML_AS_TABLE = IT_XML
EXCEPTIONS
NO_DOCUMENT = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE 'Ok'.
ELSE.
WRITE: 'Err =',
SY-SUBRC.
ENDIF.
LOOP AT IT_XML INTO XML_TAB-D.
APPEND XML_TAB.
ENDLOOP.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_SIZE
FILENAME = GK_RUTA
FILETYPE = 'BIN'
TABLES
DATA_TAB = XML_TAB
EXCEPTIONS
OTHERS = 10.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
* FORM DESCARGA_XML *

Java.lang.StackOverflowError in geting large xml file with RMI

Hello, Java Gurus.
I have a java client to get xml data from a server using RMI approach. When the xml data has a certain number of nodes, I got quoteResult.xsl on the client side. What is the actual problem ? is the file too big ? or something is wrong in the java code?
thanks. dave
java.lang.StackOverflowError
     at java.io.BufferedInputStream.read1(Compiled Code)
     at java.io.BufferedInputStream.read(Compiled Code)
     at java.io.ObjectInputStream.read(Compiled Code)
     at java.io.DataInputStream.readFully(Compiled Code)
     at java.io.DataInputStream.readUTF(Compiled Code)
     at java.io.DataInputStream.readUTF(Compiled Code)
     at java.io.ObjectInputStream.readUTF(Compiled Code)
     at java.io.ObjectInputStream.readObject(Compiled Code)
     at java.io.ObjectInputStream.inputClassFields(Compiled Code)
     at java.io.ObjectInputStream.defaultReadObject(Compiled Code)
     at java.io.ObjectInputStream.inputObject(Compiled Code)
     at java.io.ObjectInputStream.readObject(Compiled Code)
     at java.io.ObjectInputStream.inputClassFields(Compiled Code)
     at java.io.ObjectInputStream.defaultReadObject(Compiled Code)
     at org.apache.xerces.dom.ChildAndParentNode.readObject(Compiled Code)
     at java.lang.reflect.Method.invoke(Native Method)
     at java.lang.reflect.Method.invoke(Compiled Code)
so many these lines
at java.io.ObjectInputStream.readObject(Compiled Code)
     at java.io.ObjectInputStream.inputClassFields(Compiled Code)
     at java.io.ObjectInputStream.defaultReadObject(Compiled Code)
     at java.io.ObjectInputStream.inputObject(Compiled Code)
at org.apache.xerces.dom.ChildAndParentNode.readObject(Compiled Code)
     at java.lang.reflect.Method.invoke(Native Method)
     at java.lang.reflect.Method.invoke(Compiled Code)
     at java.io.ObjectInputStream.invokeObjectReader(Compiled Code)
at sun.rmi.server.UnicastRef.unmarshalValue(Compiled Code)
     at sun.rmi.server.UnicastRef.invoke(Compiled Code)
at InterfaceImpl_Stub.ExportData(Compiled Code)
     at ClientServlet.handleRequest(Compiled Code)
     at ClientServlet.doGet(Compiled Code)
     at javax.servlet.http.HttpServlet.service(Compiled Code)
     at javax.servlet.http.HttpServlet.service(Compiled Code)
     at org.apache.tomcat.core.ServletWrapper.handleRequest(Compiled Code)
     at org.apache.tomcat.core.ServletWrapper.handleRequest(Compiled Code)
     at org.apache.tomcat.servlets.InvokerServlet.service(Compiled Code)
     at javax.servlet.http.HttpServlet.service(Compiled Code)
     at org.apache.tomcat.core.ServletWrapper.handleRequest(Compiled Code)
     at org.apache.tomcat.core.ContextManager.service(Compiled Code)
     at org.apache.tomcat.service.connector.Ajp12ConnectionHandler.processConnection(Compiled Code)
     at org.apache.tomcat.service.TcpConnectionThread.run(Compiled Code)
     at java.lang.Thread.run(Compiled Code)

Hi yue42, thanks alot for your rely.
The error occured before I tried to apply the xsl template to translate the xml data into html page, anyway here is my template. dave
<?xml version="1.0"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output method="html"/>
<xsl:include href="global.xsl"/>
<xsl:template match="/">
<html>
<head>News</head>
<body>
<table>
<xsl:for-each select="//NEWS/STORY">
<xsl:if test="6>position()">
<tr>
<td><xsl:value-of select="position()"/></td>
<td><xsl:value-of select="./HEADLINE"/></td>
</tr>
</xsl:if>
</xsl:for-each>
</table>
</body>
</html>
</xsl:template>
</xsl:stylesheet>

Need Java Code or Program to compare 2 XML files ???

Similar Messages

Maybe you are looking for