Need latest PDK for 9.0.2 OC4J containers.

Where can I find the latest PDK (I believe July 2003) for 9ias 9.0.2 containers? The latest PDK available for download isn't supported by 9ias 9.0.2 containers.

We are looking into the possibility of keeping pdk.zip archive on portalstudio. Will keep you informed of its status. Till then you might want to check out the latest PDK (version 9.0.4.0.2). It contains a new extension for integration with Apache Struts, Improvements to the OmniPortlet & Web Clipping, HTTPS support for portalTools, etc.
Regards,
Abhinav

Similar Messages

Need latest vbios for N770 TF 2GD5/OC

I need the latest vbios for the above card, it is not recognized in a new Z97 motherboard.
S/N:602-V282-220B1312027747

It has been provided in old posts.
Check this
https://forum-en.msi.com/index.php?topic=182093.msg1308129#msg1308129
Did you sure the power cable is plugged and try other PCIE slots?

Need latest update for ACR

Anyone lead me to the quickest way to download the latest update for PS ACR?
SJ

I can't help with your problem since I don't have garageband, but installed the QT update with no problems. My advice? Get a bootable, external HD, and make a bootable backup/clone before upgrading/updating and ensure that works like the original. That allows you to revert to the previous good state without having to reinstall anything. Then, peruse these
http://docs.info.apple.com/article.html?artnum=106941
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html

Need latest Driver for E2200 (without suite)

Hello,
i got a GP60-Proi545FD Notebook with the Killer E2200 Networkcard. I want the latest drivers without this software suite. I found this:
https://forum-en.msi.com/index.php?topic=174229.0
The second post from the 06 January 2015. Is this the latest driver for the E2200? Because when i unzip it there is a folder named KE2200. But i got the E2200. So i can use the driver from the second post or not?
Thank you Greetings from Bavaria^^

Quote from: RX-8 on 12-January-15, 14:10:51
I think KE2200 = Killer E2200.
Yeah like RX-8 is saying K stands for Killer so it doesent mather which you download from topic

Need latest protocol for preparing movie for web in X

Hello. The basic problem is slow start on You Tube. My general question concerns preparing a movie for the web; not restricted to You Tube.
In FCP 7, it was export using QT conversion, to Quick Time Movie using broadband Med or most recent settings, choose H264, choose custom size 16:9 HD 1280 x 720p, prepare head for internet streaming by choosing quick start ,
adjust settings, and save. Then, Open .mov (usually 1 G for 3 minutes) in QT, choose export to web, transcode, and send 50-100 Mb M4V or sometimes MP4 to Host. No problem.
When I open an .mov prepared in X, the QT Player no longer allows the same options as it did when processing 7 movies. Am I missing something? I click export to web with the new system and it just starts in coding.
I appreciate the automatic features of X, but am having problems with both stutter start and a few more upload problems that I see as temporary.
Thx. www.youtube.com/user/edwardshaw1
Any suggestions most grateful for.
Ed

Check your Applications > Utilities folder. That's where the OSX Installer moved Quicktime 7 (also known as Quicktime Player) when Quicktime X became the standard player. Your pro license should still be activated. If you don't find it there and you have a Snow Leopard (or earlier) installer disk, you can find QT7 in the Extras folder. Make sure you do NOT overwrite Quicktime X when you move or install QT7 (both are originally named "Quicktime Player" - but you can rename the older Quicktime Player to "Quicktime Player 7" before moving it into your Applications folder.)
The problem with MPEG Streamclip and other "third party" conversion software (like ClipWrap and Smart Converter) is they use FFMPEG open source x.264 codecs. Apple's H.264 codec is superior (arguably, marginally better... but better.)
YouTube will "respect" your upload if it's already done well (to their specifications.) Otherwise, their software will recompress it.
In QT7Pro, you settings should be:
Compression type: H.264
Frame Rate 30 (or 29.97) fps (29.97 is the "true" 30...) [Even if your project is 720/60p - YT wants 30]
Keyframes: Automatic
Frame Reordering : OFF!
Data Rate: (I'll get back to this)
Optimized for: Streaming (only allowed with Best Quality encoding setting)
Quality: (if you specify a data rate, you only can use "High" -- and you *should* specify a data rate)
Encoding: Best Quality (Multi-pass)
Audio:
Format: AAC
Channels: Stereo (don't think it matters)
Rate: 44.1KHz
[show advanced settings]
Render settings (doesn't matter - normal is fine)
MPEG-4 AAC Encoder Settings:
I use Variable bit rate ; Sound Quality at 128 - 160kbps (about 2/3's to Best on the slider)
(you can use a constant bit rate - i think YT allows up to about 192kbps, but I don't "push it")
If you fall within these parameters, YT is not likely to futz with your vid, you'll get what you put up.
Now, for the Data Rates:
For 1080/30p (29.97p) I've found that 4Mbits/sec is adequate for most video (most of mine are tutorials). If you have sections of your video that have something like trees blowing in the wind shot against a bright blue sky -- you will definitely need a much higher data rate (check your transitions too, they can be subject to some nasty blocking/artifacting when highly compressed). To figure out how much, take a 5 second clip* of the highest action and transcode it at - start at 12.5Mbits/sec (or 12,500 kbits/sec) - and see if you notice any "blocking" - if you do, crank up the data rate another 500-1000kbits/sec (or more if it's pretty bad). If you don't — try optimizing your compression by reducing the data rate until blocking appears. You shouldn't need to exceed 18Mbits/sec... Upload your 5 sec clip to youtube and see if it works out okay. If so, just delete it. Transcode your video to those specs and upload to youtube. Remember your settings - they'll serve you well.
For 720 video, 3200kbits/sec is a good starting point. 480 - 1500 kbits/sec. and so on...
Bandwidth (aka data rate) is **key** to good video. The more compressed your video is, the more YT likes it. The more YT likes your video, the more likely they'll leave it alone and just pass it straight through. (I have seen them pass through data rates up to 18Mbits/sec. Just follow their rules.)
[*In Quicktime 7 Pro, you can set an in and out point anywhere in your video by typing 'i' for the in point and 'o' for the out. Copy (Command-C) the selection. Command N to create a new player and paste - and you have your 5 (or whatever) second clip.]

VISTA probs-need latest drivers for X-FI Notebook

HI All,
I simply can't resolve the problems with installing the X-FI Notebook card on my Dell VOSTRO.
I tried to work through the customer support team- none of their advices worked for me.
In my opinion it's the crappy default driver that isn't working correctly.
I can only use the card in audio playback mode. No recording available.
And even in this mode the card will only work with 6-bit audio depth.
Can you please give me a direct download link to the very latest audio driver for
Creative X-Fi Notebook?
I am requesting the link since I'm a bit confused by the number of different downloads out there. I tried so many of them but none worked for me.
Thank you

hummm.... the latest drivers tehy released were on may 40. Hey, by chance do you have windows vista 32-bit's If so are u too having problem with sounds coming out of randomly different speakers?

MOVED: I need latest bios for 785GTM-E45

This topic has been moved to BIOS.
https://forum-en.msi.com/index.php?topic=141926.0

Thanks for the advice Svet. Is it true that the mobo is a bit "sensitive" with ram? I have tried 3 pairs (mushkin, corsair, kingston) and it seems that only kingston minimizes the problems.
Very strange since all pairs have passed Memtest86+ without any problem, and they are all DDR2 6400 5-5-5-18 1,8V.
I also changed the Cpu with an Athlon 250, same behavior. All my hardware is tested in fact, as it comes directly from my previous Freenas rig and it worked perfectly with an Asrock 780GM-LE.
It goes without saying that i also test it without any disks, usb connectors, with only one stick of memory, with another PSU etc...

Need latest vBios for GTX770 4GB TF/OC

2 x GTX770 4GB TF OC (N770TF 4GB5/OC) in SLI mode.
S/N 602-V282-360B1404095084
S/N 602-V282-360B1404095089
Current vBios for both cards:
80.04.E6.00.31

Quote from: Wolfie on 24-June-14, 20:56:34
Current vBios for both cards:
80.04.E6.00.31
Quote from: GOP / UEFI Vbios requests - Read Here First on 29-March-13, 22:47:26
4.) Be aware that gpu-z screenshots or what gpu-z reads out as bios version are NOT of any use for identifying the required vbios version. While it doesn't hurt to add those when S/N and an actual copy of the vbios are also supplied simply just adding screenshots or version readouts will not get you any further and us having to ask for the required informations.
Add a copy of the current vbios (save to file, upload to some file hoster and add link here).

Need latest version for this i pad but cannot get dwnload

Cannot sync this i pad as i dont have latest i tunes version but unable to dwnload that version

Here's where to find the latest iTunes version (10.7): http://www.apple.com/itunes/
Indeed if your computer is too old, it will not be able to run this version.

Hello everybody, I need to update my ITunes on my MAC (laptop) to the newer version so I can then be able to update the latest updates for my Iphone-3G'S. I don't require a complete reinstall just need to be able to update it.What I have tried so far is I

Hello everybody, Im trying to update my ITunes on my MAC (laptop) to the newer version so I can then be able to update the latest updates for my Iphone-3G. I don’t require a complete reinstall just need to be able to update my itunes.
What I have tried so far is I had my MAC search for update’s and it said that I should update to (ITunes version 10 . 6 . 3 ) So I asked it to do the update but after 2hrs of waiting for it to download/update it then puts up a message saying the following- (In order to continue installation, please close the following application: ITunes).
When I tried to do this another message comes up that says- (The update ITunes can’t be installed. The following install step failed: run preupgrade script for Apple mobile device support. Contact the software manufacturer for assistance.)
I have also tried to run the update while having closed ITunes before I even start the update but the same problem happens after waiting about 2hrs.
Some one that had the same problem said this might be happening in the older operating systems. But that does not make sense because surely Apple want customers who own a MAC and i-phone to still buy from iTunes.
My MAC is about 4-5years old. I have a i-phone.3G,
Can anybody help me please and Thank you?

Download iTunes using the tab at the top of this page. Then run the update with iTunes closed.

How do i setup Mail account on my mac book like in mobile phone? I.e. Don't want to store the mails/attachments on pc, however need the latest emails for given number of days?

How do i setup Mail account on my mac book like in mobile phone? I.e. Don't want to store the mails/attachments on pc, however need the latest emails for given number of days?
This helps the storage and purpose of email as well. I could always log into online email account to find history of emails.
Thanks
Chai

How do i setup Mail account on my mac book like in mobile phone? I.e. Don't want to store the mails/attachments on pc, however need the latest emails for given number of days?
This helps the storage and purpose of email as well. I could always log into online email account to find history of emails.
Thanks
Chai

HT5654 When I connect my iPhone to my computer, it says that I need the latest download for my iTunes to be able to sync. I already have the iOS7 and the 11.1.3 update. Whats the deal?

When I connect my iPhone to my computer, it says that I need the latest download for my iTunes to be able to sync. I already have the iOS7 and the 11.1.3 update. Whats the deal?

I have the same thing with my ipad "Bill's Ipad cannot be used because it requires itunes version 11.1 or later"
Thanks for help.

I am running Snow Leopard 10.6.8 with bootcamp 3.3 on my Imac 2011. I need to updgrade to mountain lion. If I first upgrade to mountain lion, how do I go about upgrading from bootcamp 3.3 to latest bootcamp for mountain lion?

I am running Snow Leopard 10.6.8 with bootcamp 3.3 on my Imac 2011. I need to updgrade to mountain lion. If I first upgrade to mountain lion, how do I go about upgrading from bootcamp 3.3 to latest bootcamp for mountain lion?
I have seen a lot of discussions upgrading from Boot Camp 4 to 5 but no answers upgrading from boot camp 3.3 to 5. My worry is that if I upgrade from snow leopard to mountain lion, that my bootcamp partition will no longer be able to boot up. There seem to be a lot of threads suggesting problems that are possible. Has anyone gone through this upgrade with success?

Before doing any installation restart OSX from your 10.6 Snow Leopard DVD and use Disk Utility to Both Repair The Disk and Repair the Permissions of your Macintosh HD.
Next remove your Snow Leopard DVD and restart your iMac into OSX.
Update to the latest version of OS X Snow Leopard by clicking the Apple icon and choose Software Update to install Snow Leopard v10.6.8, the latest version.
Use Time Machine to make a Full Backup of your Macintosh HD.
Shut down and restart into Windows by holding the Option key at the chime and selecting Windows.
Now use Windows Backup to make a Full Image Backup of your Windows Installation to a removable drive.
Shut Down and Boot back into OSX.
Open the Mac App Store from your Dock to buy and download Mountain Lion. Then follow the onscreen instructions to install it.
Upgrading your OSX to 10.8 should not effect the Windows Partition at all since you are only upgrading the Mac side. You should not have to run the Boot Camp Assitant 5 Utility in OSX at all.
Your Boot Camp 3.3 Windows Support Drivers et. al only effect your Windows installation and should continue to run fine after upgrading.
Which version of Windows do you already have installed on the existing Boot Camp Partition?
Is it 32 bit or 64 bit?

What is the latest update available for Mac OSX 10.5.8 that will allow me to get the latest update for iTunes. I really need to update my iPhone and CAN'T!! GRRRR!!!

What is the latest update available for Mac OSX 10.5.8 that will allow me to get the latest update for iTunes. I really need to update my iPhone and CAN'T!! GRRRR!!!

Minimally you need Snow Leopard or greater:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

I need the the latest firmware for Airport Extreme Model A1034 (M8799LL/A)

Hello everybody:
I want to flash my Airport Extreme Model A1034(M8799LL/A)with the latest firmware available..
My Airport have a internal modem , 1 Wan , 1 Ethernet & 1 USB ports
I checked some firmware updates, but I am not sure what is the correct update ..
I don't want to ruin my Airport for flashing the Airport with the wrong update ..
I only have Windows Xp computers ,, I need a Mac to do it ?
Please somebody help me to find the update ,,
Thanks in advance ,,

Do you know if this is still the case? (Version 5.7 is still the latest available for the 802.11g version of the AirPort Extreme Base Station).
I'm a little confused after the release of AirPort Base Station Update 2007-002 for Windows:
http://www.apple.com/support/downloads/airportbasestationupdate2007002forwindows .html
It clearly states that "AirPort Utility v5.2.1 software supports the AirPort Extreme Base Station with 802.11n, AirPort Extreme Base Station and AirPort Express Base Station." But then if you read the System Requirements it says that you need:
* Windows XP with Service Pack 2
* Windows Vista
* AirPort Utility 5.0 or later
* AirPort Extreme Base Station with *802.11n*
So what is the latest version for the 802.11g version of the AirPort Extreme Base Station?
Thanks

Need latest PDK for 9.0.2 OC4J containers.

Similar Messages

Maybe you are looking for