Need po box and street address both in address

Hi,
i need to print oth PO BOX and Street name & number in sapscript.
using Address & End Address.
this is printing either one of those....
is there any possibility to show both?
Giri

Hi Brad,
I tried to concatenate the street and PO BOX in street field and its working fine... but the problem is client wants in different line... not in same line...
is there any commands avaialble for 2 street names?
You don't need to use LOCATION as the other poster suggested. Like I mentioned before, you can use one of the other NAME fields or one of the other STREET fields to store the PO Box value (or just hold the value at runtime if you're not using an address number for the command). You would use the NAME or STREET line in the ADDRESS command as usual. The ADDRESS_INTO_PRINTFORM function takes care of moving it to a separate line when there are enough lines available. Note that if you intend to use an addiional field for permanent storage of the value, you may need to configure your master data object to make the field visible.
Personally, I might opt for the user exit approach.

Similar Messages

The middle handle on the rectangle is not there anymore when I select it with the black arrow (v) tool. Show bounding box and edges are both on. Where dd the middle anchor go??

The middle handle on the rectangle is not there anymore when I select it with the black arrow (v) tool. Show bounding box and edges are both on. Where dd the middle anchor go??

haggyabeken,
I am afraid you have come across the Live Rectangle bug which is limited to the MAC versions starting with 10.7 and 10.8, but not 10.9 (Mavericks), see this thread linked to below.
https://forums.adobe.com/thread/1595973
So a switch to Mavericks with a reinstallation might be the way to solve it here and now.
To get round it in each case, it is possible to Expand the Live Rectangles to get normal old fashioned rectangles, or to Pathfinder>Unite, or to use the Scale Tool.
A more permanent way round that is to create normal old fashioned rectangles, after running the free script created by Pawel, see this thread with download link:
https://forums.adobe.com/thread/1587587

How can I exchange my pc created documents on Excel, Word, and PowerPoint with my mac and my Pages, Numbers and Keynote created content with my pc? I need to create and edit between both.

How can I exchange my pc created documents on Excel, Word, and PowerPoint with my mac and my Pages, Numbers and Keynote created content with my pc? I need to create and edit and exchange between both types of operating systems.

Your Windows system will not open any Pages, Numbers or Keynote documents. No applications exist for Windows that can open those formats. You will need to export your documents in Word, Excel and PowerPoint formats, respectively, before you'll be able to view and edit the documents on your Windows system. The iWork documents can natively open Word, Excel and PP documents, though there are limitations on what can be imported (for instance, Numbers does not support all possible Excel functions). Consult the documentation for the relevant iWork application for details on importing and exporting.
If you are asking how to get the documents from one system to the other, then there are several ways to do that, including file sharing, using an external drive (hard drive, USB flash drive), or emailing the documents to yourself. Which would be best for your situation I can't say without more details about your usage.
Regarsd.

I need to sort and organize all my email addresses in apple mail? - where are they and how can I organize and copy them ? urgent help needed please

really need urgent help - where do I find the entire list of all my email addresses? and how do I sort and organize them into folders ?

really need urgent help - where do I find the entire list of all my email addresses? and how do I sort and organize them into folders ?

Display both PO and Street in address node

Hi Gurus,
I want to display an adderss with both Street and PObox.
For that I am using an address node.If I give "POBOX has priority", only POBOX is displayed.If I give "STREET has priority", only street is displayed in the options available for address node.
How to get both of them displayed in the address. Using an address node is Mandatory.
Is it possible to dispaly both po and street ?
Awaiting your valuable answers,This is an urgent requirement
Thanks,
Raj.

Hi Raj,
Will you be more specific and clear about your question. Please explain where you are giving this priority and in which form like textfield and how you want to show the address. and also explain the node(cardinality, attributes) you are using as address node.
Regards,
Vaibhav Tiwari.

I'm trying to order some photo albums from iphoto for chistmas gifts and there is a notification that keeps popping up telling me I need to send to a p.o. box, the mailing address IS a po box and it still won't let me order. What do I do?

I'm trying to order some photo albums from iphoto for chistmas gifts and there is a notification that keeps popping up telling me I need to send to a p.o. box, the mailing address IS a po box and it still won't let me order. What do I do?

I've not seen this message but would think that it might say that you can not send to a PO Box - exactly what is the error message?
LN

Who Decided to Combine the Search Box and Address Bar?

A very wise person once said:
"Make everything as simple as possible, but no simpler!"
That fundamental rule of design has been volated with Internet Explorer 9.
I've been using IE9 for about a month now, trying to get used to all the new things. Performance-wise it's nice, and the changes to security are welcome. Okay, so the color-management is half baked, and it still has its problems, but I guess
it's an improvement.
But what idiot decided to make the search box and the address field one and the same?
You think I'm being petty? Go try to research what a particular file is - for example, go see if you can find info on "bib.dll".
It wants to make it into a URL. It's not a URL. It may LOOK like one, but it's a name, honest!
Putting quotes around it doesn't help. Maybe I'm missing the advanced syntax it takes to get such a thing to be a search term instead of a URL. Even if so, how is this an improvement or simplification? It's certainly not intuitively obvious how
to force a search, short of dredging up a link to Google and typing info in there directly.
Doing a search and typing in an address are two FUNDAMENTALLY DIFFERENT THINGS.
And hey, it's not a big deal that you can no longer see what it was you searched for, and maybe even edit it and search again. No, because now the search engine pages have to waste space to put up a box showing what you just searched for, since it's
now GONE out of the address field.
How does stuff like this pass a design review?
And to think the Microsoft Engineers worked extra hard to take it out.
You Engineers at Microsoft need to take the product back from your moronic marketing people and make it actually work right.
-Noel

Ed, with 36 years software engineering experience, I know the difference between the difficulty of adapting to change and when something just isn't right.
This isn't right. Ever hear the phrase "apples and oranges" to describe two things that don't go together? That concept fits well here.
You say that thinking along the lines of "you no longer had to think about which box you want to type into" helped justify the change.
Is there something wrong with thinking? This is akin to saying, "you no longer had to think about which nozzle at the gas station to fill your tank from".
Diesel doesn't work in a gas engine. Nor does the water from the garden hose.
You say "both methods of typing work in the one box". But they don't, logically! Did you actually read this thread?
Is there something wrong with logic?
Alas, what the simple users of the general public want and what experienced computer users need are clearly two different things, and it's clear looking back that this move simply marked another step in Microsoft's clear intent
to walk away from making serious computer operating systems that actually
work. Windows 8 is testament to that (and don't tell me you haven't noticed all the negative response). Other such things include Windows Search - which is designed to be unable to actually do an exhaustive search... Even going
back as far as hiding file extensions by default. And don't get me started on the use of telemetry to justify deprecating such things as Windows Backup.
Do you understand the difference between leading and following? Which, as a concept, would you say is better? You need to stay the hell away from trying to emulate what Google does. You can do better! If you want a different
example, follow Firefox - it still has a search box. Even Apple - known for dumbing things down to the level of the family dog - stil puts a search box in Safari.
I don't mean to be critical of your response, Ed, but this is a good example of "the operation was a success but the patient died".
Thank goodness there are 3rd party developers who are struggling to put back functionality Microsoft keeps removing. But then Microsoft removes the APIs they use. That's not going to keep!
P.S., Watch the film "Idiocracy" some time.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

I changed my internet box and now my airport extreme light flashes amber what I need to do to get the green light back

I changed my internet box and now my airport extreme light is flashing amber but I have internet connection, how can I get the green light back

When you change modem (the internet box I presume) you should reset the AE to factory and redo the setup completely.
However if you merely want to stop the amber flashing.. find the cause.
Open the airport utility and click on the AE..
It will give you a list of faults or problems... fix each one and the light will turn green.
The most likely fault is double NAT.
That means the AE should be in bridge mode.. but if you list the fault we can give you further help with what to do to fix it if you cannot understand the instructions.
Apple does give a procedure to remove the problem although it may not always be the best solution.
eg Ignore.. the light will turn green.
Lately Apple is saying to use double NAT and ignore the problem.. I do not thing that is a good idea at all.
To bridge however may be easier after a full factory reset than trying to do a change to the setup.
If you run Yosemite.. then I recommend the following.. please read AE for TC.. (Time Capsule is what I mainly use but the setup is identical).
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
In your case bridge is most likely required.. and it is up to you how you deal with this one.. for now see if it is stable.. if it gives you issues come back and fix it.
4. Set IPv6 to link-local only on the computer..
This is strange one in that apple should have fixed this up ages ago.. but we are finding the auto setting even on Yosemite is still giving the wrong setup.

I need to work on documents in both my iMac and air book. But I have to download document and them upload it, and when I upload it I can't open it unless I open it on my phone first. Yet changes made on phone appear straight away. Does this make sense????

I need to work on documents in both my iMac and air book. But I have to download document and them upload it, and when I upload it I can't open it unless I open it on my phone first. Yet changes made on phone appear straight away. Does this make sense????

On your Macs open System Preferences > iCloud
Deselect the box next to Documents & Data, then reselect that box then restart your Macs.
On the iPhone tap Settings > iCloud. Switch Documents & Data off then back on then reset the iPhone.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
See if you can open the files now without opening on the iPhone first.

HT3180 My wireless router needed restart. And, no Apple TV signal. How do I reset the Apple TV box.

My wireless router needed restart. And, no Apple TV signal. How do I reset the Apple TV box? no lite. nothing

The remote app requires both to be on the same network and home sharing to be enabled, you will need the physical remote to set this up. You can purchase a replacement through Apple.

Dispaly PO and Street in an address node

Hi Gurus,
I am creating an adobe non-interactive form.
I want to display an adderss with both Street and PObox.
For that I am using an address node.If I give "POBOX has priority", only POBOX is displayed.If I give "STREET has priority", only street is displayed in the options available for address node.
Using an address node is Mandatory.
Is it possible to dispaly both po and street ?
Awaiting your valuable answers,This is an urgent requirement
Thanks,
Raj.

Hi,
Take the data from the tables ADRC or KNA1 into a structure ( defined within ) writing program lines with the field value ADDRNR.
Then print the individual fields through individual text nodes.
Regards,
Ram

Need dissociation street name and street number from one column?

Hi all,
I have one table A with one column with Street name and street number.
And I was adding second column and now need update this second column with street number
and delete street number from first column.
How can unpluging street name and street number from one column?
(street name are 90% char, number is 100 numeric, in 10% street name name
starts with number (1.HEROES 223, 1.HEROES 224...)
Gordan

Hi,
Solution of Mr. Wijk come first, however I like to post (it's very similar and incomplete, I know...). Supose you have a table call address (use position -1 like Mr. Wijk to look backward). It's better in cases like '1.My Street 123' (the space before the number is very important)
SELECT substr(a.street_name,
              1,
              instr(a.street_name,
                    -1) - 1) street_name,
       substr(a.street_name,
              instr(a.street_name,
                    -1) + 1) street_number
FROM address a;Regards,

I just downloaded OSX maverick and now I cannot drag addresses from my contacts to the "To" box when sending emails. How can I go back to old drag groups or addresses to the box?

I just downloaded OSX Maverick and now I cannot drag addresses from my contacts to the "To" box when sending email. How can I get back to dragging groups or individual contacts to emails?

Starting to type a name and getting a list of matches is good but it's not a substitute for being able to choose twenty or thirty names from your address book and dragging them into the "To" field. Of course many contacts can be put into a group but I may want to send occasional emails to many people who don't fit any group, and there may be no need to create a group just for that email.
If you agree please send an email to apple feedback for Maverick OS X.

Both my husband and I have both downloaded the new IOS 8.2 and now he is getting my text messages that are only addressed to me He is a 5 and I have a 6. How can I fix that?

My husband and I have both downloaded the new IOS 8.2 and now he is getting my text messages that are only addressed to me. He has a 5 and I have a 6. It is like we are synced together. How can I fix that?

Is he getting your SMS messages (green) or your iMessages (blue). If SMS message, go to Settings>Messages and turn off Text Forwarding. If blue, are you sharing an Apple ID? You should each have your own.

Need action to open save dialog box and STOP there. Help!!

So here is the background info, in case it helps to know why I am looking for this option - I am pulling photos off an internal company database. I can not access these photos as regular files - I have to go to our website, input an employee number, and right click, copy. Therefore, any options related to batch editing, if they'd even help otherwise, are out for this first step
In the meantime, I have created an action that opens a new doc, pastes the photo in, and resizes it. Assigned f5 as the shortcut. Then, to save my dexterity (:P) I also reassigned the "open save for web & devices" shortcut to f6.
However, this is such a massive project, and coming to a time-crunch, that I'd really like to take the action I created even further to cut out that second step (open save w/ f6).
I've googled and apparently am not phrasing the question right, no matter how hard I try.
HOW in the world, if possible, can I add a step to my action that simply OPENS the save for web & devices dialog box? I know how to make it open and save, but no more than that. I need to open and just STOP there, so that I can simply hit enter and input the desired file name.
Is this possible?! I'll love you forever if you can tell me that it is and how to accomplish it! Btw, I am on Photoshop CS4.

For your F6 save files action, record it saving a file (it doesn't matter what or where for the moment)
Now, in the actions palette, click the right hand box where your save action is. A dialogue box will pop up saying "This will toggle the state of all dialogs in this action..." Click ok beacause we want to hand over control of the save back to the user. Now, when you run your save action the dialogue will appear and you can save the file where and as you want.
Hope this helps.

Need po box and street address both in address

Similar Messages

Maybe you are looking for