Need Pop-Up screen in Winclient

Hi All,
I have a requirement where in a pop screen should be bringing in some details of customer in the CIC0, winclient screen. How do i acheive this? Points would be awarded..!
Regards,
Suren

There are several ways to show a popup, I know two of them:
You can have a POPUP to inform:
Example:
CALL FUNCTION 'POPUP_TO_INFORM'
            EXPORTING
              titel = iv_msgv1
              txt1 = iv_msgv2
              txt2 = iv_msgv3
              txt3 = iv_msgv4.
Another type of POPUP is one where a decision needs to be taken:
Example:
CALL FUNCTION 'POPUP_TO_DECIDE_INFO'
            EXPORTING
              titel     = iv_msgv1
              textline1 = iv_msgv2
              textline2 = iv_msgv3
            IMPORTING
              answer    = w_answer.
Hope this helped.

Similar Messages

Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,it wouldn't need to ask t

Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,Apple wouldn't need to ask the stupid question"Do you want to reopen Aperture?" to begin with. Anyone out there having the same annoying problem?? I like Aperture or used to anyway,but if this nonsense continues, I will be forced to buy some other editor besides "No hanging fruit - Adobe photoshop CS5" or "I don't like you so I'm shutting down - Aperture".

Hello,
sorry to hear about your troubles, but we will need to have more technical information about your problem to be able to help you:
There may be several reasons that can cause Aperture to crash on start up:
You may have imported an image (or video) in an encoding that Aperture does not support, or that is larger than 2 GB, or that is corrupted and Aperture cannot process it
Your Aperture Library or Preferences may have been corrupted
Or you are having a system wide problem with your machine.
Or you may simple be running out of disk space.
It would help, if you could post the crash log from your last crash. Also, more details on your Aperture Library: Is it managed or references? how large is it? Is it on your system drive or on an external drive?
What have you done, shortly before the trouble started? Have you imported new images or videos? Did you install any plug-ins or any new software, lile Final Cut?
Try, if you can get Aperture to launch, if you defer the generation of Previews: Hold down the SHIFT-key immediately after you start Aperture to prevent preview generation for that session. If a damaged image in your library is preventing normal opening, this may allow you to start Aperture. If this succeeds, try to identify the broken image or video among the images you recently imported and remove it from the library.
Regards
Léonie
Don't you think your user name is a little bit tactless in an Apple provided forum?

Pop up screen needs to be added to standard tcode

Hi all ,
"How to add a pop - up screen to standard Tcode. "
I want to add a pop up - screen to the tcode : CO15.
In this Tcode i will enter the Production order and press enter.
In the next screen I will give the quantity (for eg. 5) for that production order and also date fields .
When I click on the save button, I want to display a pop-up screen giving all the 5 items and also checkbox for each item. The user will then check whatever number of items he wants for eg he will check 3 items and press enter button which(enter button) also needs to be put in that pop up screen.
Next time he want to check the other 2 items also.Initially he has checked the 3 items.
So this time the POP-UP screen should display the rest 2 items which were not checked .
Edited by: peter k on Oct 27, 2008 5:24 AM

Was it a pop-under?
Because far as I know they couldn't fix that. Only stop pop-ups.
If you want to stop them for real, then install Firefox web browser and the NoScript add-on.
Head to Firefox toolbar > customize and drag the Temp Allow All Button to the toolbar area.
When you surf, your Javascript will be turned off by default, and if you need it, then you click the Temp Allow All Button and it loads, therefore reducing the pop-unders and pop-ups drastically.
Also add Ad Block Plus too for more less hassle free surfing.

Need to avoid pop-up screen while printing shop paper

hi all ,
we have develop a z program to print shop paper for selected orders based on selection criteria. Once the output displayed (out put contain shop paper , printer,order no and operation no )for selection criteria user will select one or many records from output and click on print button. Once user select the print button the spool request has to be created,
problem :- when we select the print button in output display we are getting print pop-up screen
OutputDevice
Frontend printer HP
Copies           1
Page selection
Name
Title
Authorization
Spool retention pe
Archiving mode
   Thanks in advance
jayasankar

hi all ,
we have develop a z program to print shop paper for selected orders based on selection criteria. Once the output displayed (out put contain shop paper , printer,order no and operation no )for selection criteria user will select one or many records from output and click on print button. Once user select the print button the spool request has to be created,
problem :- when we select the print button in output display we are getting print pop-up screen
OutputDevice
Frontend printer HP
Copies           1
Page selection
Name
Title
Authorization
Spool retention pe
Archiving mode
   Thanks in advance
jayasankar

What do I get "phishing" pop-up screens on a brand new install of Firefox?

Something has infected my Firefox and I can't get rid of it. About a week or so ago, I started getting pop-up ads every time I go to a link in Firefox. I looked on the help blog and it said to do a "Restore to original settings". That didn't do any good. I still got the popups.
So I removed Firefox completely from my computer and rebooted it. I just reinstalled Firefox and almost instantly, on the very first link I got a pop-up screen telling me that I need to do a "Windows Player Update. - Recommended Player Update - Important!" and it wants me to click on an install button. It looks like some phishing site to me.
It won't be so bad, except it happens all the time. Since it's a pop-up, half the time, I can't see my screen.
This is only happening on Firefox. IE is unaffected.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

How to close a POP UP SCREEN

Hi,
Im calling a pop up screen (which contains and editable alv grid) when pressing a button on a status of a OO alv grid. Then, i write something on this alv grid from pop up screen and finally, when i want to close the window, i clic on the x thats on the right upper corner of the screen.
When i do this, the program goes to the 'Module User command Input', where ive witten the sentences 'leave to screen 100 (first screen)', 'exit', 'leave screen', 'leave program'. Then it goes back to the 'Module status Output' (I dont know why it goes there) And finally nothing happens. The pop up window just wont close.
I really need so serious help with this.
Cheers,
Roberto.

Hi,
have you tried the following two commands?
SET SCREEN 0.
LEAVE SCREEN.
Cheers

Update Z table from Custom pop up screen

Hi All,
I need to enhance CC01 transaction.
CC01 is used to create Change Numbers.
My requirement is when Profile(Input field in CC01) is entered into initial screen of CC01 and enter key is hit, a custom pop up screen should be raised. This pop up screen will have 10 input fields from Z table. So when the user enters values in the input fields of pop up screen, I need to capture these values. When processing of CC01 is complete and saved system generates a Change Number, then I need to update the Z table with the values from custom pop up screen to the corresponding Change Number (Generated after Save)in Z table
I have found the customer enhancement for raising Pop up screen pccd0005 (EXIT_SAPMC29C_006).
My problem is how to link the pop up screen values with the Change number and update the Z table.
Change Number is generated after CC01 Save.
Can any one help me how to achieve this functionality?
Thanks in advance
Bhasker

<u>Syntax:</u>
EXPORT param_1 TO MEMORY ID 'EXIT_PCCD'.
IMPORT param_1 FROM MEMORY ID 'EXIT_PCCD'.
FREE MEMORY ID 'EXIT_PCCD'.
Please look into the F1-help on Export/Import statements for more details.
Message was edited by: Sam

In sales order cross selling pop up screen requires FIND option

Dear Friends,
In our company we are using the pop up screen for cross selling items per BOM.
Our requirement is in the pop up screen we require find option also. we have only copy and cancel options are there in the standard functionality.
Could any one of you help us how can add the functionality of find option with out changing any standard code, ( i mean any OSS notes or user exits ).
Thanks in advance,
NLX

Hi Joshi,
By seeing the above link, I think after creating transaction variant we need to create Custom tcode to use that transaction variant.
But, in this case we should use transaction VA01 only, but not any Custom Tcode..
This is very urgent ..
Is there any other option to meet my requirement...
Thanks,
Radhika

Adding selection Parameters to the POP-UP Screen

Hi my requirement is i need to add all the line items netweight and gross weight and need to show the total line items in a pop up window when i press enter after entering the line items in ME21N.
Here iam using the user exit : EXIT_sapmm06e_016 .
It is working fine But now i need to add selection parameters in this pop up window.
The two selection parametes are Shipping Point and Shipping Condition.
So how to add selection parameters in POP UP Screen and how it will be updated in ME21N Line items,.

in ur custom defined screen, you can add the selection parameter which wouldbe called within ZXM06U41.
Validate ur entries.. and you can make use of BAPI/ BDC to update those details in ME21N

Satellite X200 20G - Fn pop-up screen doesn't appear anymore

Hello there,
(I made a post on this subject yesterday evening but I cannot find it anywhere.... sorry if both appear later)
I would need your help as the pop-up screen with the Function keys doesn't appear anymore when I place the cursor on the top of my screen....
I don't think I have changed any settings. I have installed the SP1 for Vista but I cannot tell if this is linked.
I found Toshiba "Accessibility", but when I click on the accessibility icon, I get a Toshiba Accessibility Error screen telling "This system, can not use Toshiba Accessibility" ...
Could you please advise?
Thank you,
Guy

HI!
I Have a X200-212 running Vista w/out SP1.
When I was upgrading drivers(after i buy it) i somehow lost the FN function and the popup toolbar. That happened after i installed or update(dont remenber) the toshiba bluetooth stack.
I unisntalled the toshiba bluetooth stack and installed the windows vista bluetooth support as an alternative, and the FN thingy started to work again.
But in your case im guessing its something related to the sp1 ?:| ,lets see if Toshiba updates the X200 drivers to support the Vista SP1.
Cheers

Nelp help in Pop-Up Screen Creation

Hi All,
I have a button in application bar in my ALV Report and I need to display a pop-Up screen up on clicking that button.
Can any body help me.
Regards,
Srinivas

Hi Srinivas rao,
Try the below logic.
in any FM to display.
     CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY' or 'ALV_GRID_DISPLAY.
      EXPORTING
          i_callback_program       = sy-repid
       i_callback_user_command = 'USER_COMMAND'.
then write the form statement.
FORM user_command USING ucomm    TYPE sy-ucomm
                            selfield TYPE slis_selfield.
CASE ucomm.
WHEN 'BUTTON NAME'.
use FM 'POPUP_TO_CONFIRM'.
*ENDFORM.
Let me know if any issue.
Regards,
Guru

"Trouble verifying your membership" Pop Up Screen

One of users receieves a "We are having trouble verifying your membership" pop up screen each morning when she logs into Creative Cloud. She is able to clock continue and perform her work but we would like to know why she is receiving this message and how to resolve. Below is a picture of what she see's each morning.

Sally, The Creative Cloud single-app membership for Illustrator has been suspended in month of March 2014,
You have active Creative Cloud Student and Teacher Edition, you need to log out & log back in of the CC desktop App.
http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
It should resolve the issue.
Let us know if it worked for you.
Regards
Rajshree

Pop-Up Screen Disappearing

Hi Gurus,
Just one small help.
I have a pop-up screen and now I need to control it for some buttons present in it.
E.g There are two buttons Enter and Delete
On Pressing Enter, the Pop-Up is disappearing, that is fine, but on Pressing Delete also the Pop-Up is
disappearing, which I don't want.
NOTE: Disappearing - Coming back to the Original Screen.
Can anyone please help me ?
Thanks
Chandan

Hi,
If the task done in pop-up screen is very simple, you can create your own screen with 'dialog screen' option while creation and you can set your own pf-status and do whatever you want.
Further while calling the screen, as you wish to have like pop-up screen, use the following syntax.
CALL SCREEN 9000 STARTING AT C1 R1 ENDING AT C2 R2.
Thanks and regards,
Venkat.

Can I stop the pop up screen to show while receiving call ?

Hello,
When I paired my car kit (handfree) with my iPhone, the pop up screen will show up when I receiving a call ...
http://gizmodo.com/gadgets/iphone/iphone-bluetooth-not-much-but-whats-there-is-c harming-274068.php
Asking me whether I would like to use - handfree, iPhone speaker or iPhone. Can I set the handfree as a default without making the choice?
Thanks

When using a headset, answering a call from it is as simple as pushing the ANSWER button on the headset. The call should then be answered and the source automatically set to BT headset. No need to select the source using the iPhone. I suspect there is an ANSWER button on car hands-frees, but I don't know for sure, since I don't own one.

Using wireless 4G Sierra dongle. how can I stop the pop up screen trying to modify configuration when I connect

I am using wireless 4G Wireless Sierra dongle. I have a Mac Air. How can I stop the pop up screen trying to modify configuration when I connect. I can connect with no problems but I have to click 'cancel' (on pop up screen that says network needs to modify my configuration) sometimes as many as 50 times!!! very annoying as the pop up is in middle of screen & won't go away unless i click it. Thank you foray help!

Contact the providers technical support staff.
Ciao.

Need Pop-Up screen in Winclient

Similar Messages

Maybe you are looking for