Need power adapter from an iPhone 5 Europe to charge in canada?

Please, Need power adapter from an iPhone 5 Europe to charge it in canada?

You just need to get an adapter for the plug pins
No need for a voltage adapter, just look for 120/240 50/60Hz on the label and if you do see it you're set for North American power.

Similar Messages

  • Can I purchase a power adapter for the Iphone 5 at a retail store????

    Can i purchase a power adapter for the iphone 5 at an apple store??? Mine was stolen from my car ------ arrrrrggggghhhhhhhhhhh

    Be sure to check the phone stores as well. I just picked up a lightening to USB cord at my local Verizon store yesterday (they had just received a shipment)

  • Does the iPad Air power adapter automatically conver Nothern Europe power to 60 cycles.

    Does the iPad Air power adapter automatically conver Nothern Europe power to 60 cycles.

    To expand on stedman's correct answer, all you need is a plug adapter. Apple also sells kits and cords that will convert the plug on the power adapter to any other type of plug for worldwide compatibility.

  • My ipod will not charge from a wall socket but will charge using the same cable if the usb end is plugged into a computer or an airport power source. My iphone and ipad charge fine on the same cable usin ghte same wall plug in the same wall socket?

    My ipod will not charge from a wall socket but will charge using the same cable if the usb end is plugged into a computer or directly into an airport power source. My iphone and ipad charge fine on the same cable using the same wall plug in the same wall socket. This makes no sense but I see that it has been posted as a problem elsewhere. This must be due to some kind of degredation of the Ipod. . It is not fixed by IOS resets as others have noted.
    Has anyone asked Apple directly about this?

    Hi there Apples or Pears,
    I would recommend taking a look at the troubleshooting steps found in the articles below.
    Charging your iPod battery
    http://support.apple.com/kb/ht1384
    iPod's battery doesn't charge
    http://support.apple.com/kb/ta44551
    -Griff W.

  • Power adapter from 3g ipod

    Can I use my power adapter from my ipod 3g on my ipod mini?

    Yes. You can.
    Cheers~!
    -Bryan

  • Can I use my new charge cord from my iPhone 4S to charge my 3G iPhone?

    Can I use my new charge cord from my iPhone 4S to charge my 3G iPhone?

    Yes, they are interchangable.

  • HT1665 Can I use a 10 W USB power adapter from an IPad to charge an iPhone 5s.

    I have 10 W. USB power adapter that I bought for my iPad. Can I plug my iPhone 5s into it to charge?  I see that the adapter that comes with the 5s is listed at 5 watts.

    volts are pushed amps are drawn
    if a charger provide the 5volts ios devices were meant to be charged by it does not matter
    if it can provide 1000 amps making it a 5000W device because of ohms law which state W = Amps * Volts

  • Need Power Adapter - where to buy?

    Hi folks,
    My trusty 12" Powerbook's power adapter is slowly falling apart.
    Is it possible to purchase official ones still? I can't find any on the website, and i don't want to risk getting one from Amazon / eBay due to random third-party ones that may not work.
    I need a UK plug too, hopefully they aren't a fortune??

    I have an IGO which I purchased a couple of years ago when the one that came with my powerbook burned up. I would recommend it and you can buy it on line. Much more substantial than the one that came with the powerbook. Try igo.com

  • Old iPod USB Power adapter ok for iPhone?

    Hey folks,
    Is the old-style iPod (classic) USB power adapter ok to use with the iPhone 3G? I wish I could post the picture of what it looks like ...
    It's that 1.5" x 1.5", white, biscuit jack-looking plastic adapter with retractable power prongs on one end, and the female USB port on the other. Plugged my old 60GB iPod dock cable in to the USB end, and the adapter to a wall outlet and viola ... AC power / charging ...
    Was wondering if I can do the same with my iPhone 3G dock cable?
    Thanks!

    Yes, that will be fine.
    All of the old USB charging accessories will work for the iPhone just fine. The firewire ones, however, will not.

  • Is the iPad power adapter interchangable with iPhone adapter?

    Is the iPhone power adapter(5s) interchangeable with the iPad power adapter, both use the lightening connector.

    The short answer is yes.
    You can use the iPad adapter with the iPhone.
    iPad requires more power.
    If you use the iPhone adapter for the iPad, it will charge but just very very slowly.

  • Need power adapter for IQ846

    The old power adapter for IQ846 was broken, need to buy a new one. However the replacement adapter is pricy $100. Does anyone know a cheaper option on the adapter? I don't mind 2nd hand if it works ok. thx for any info.

    Hello granite2012:
               Yes better then Radio Shack try E-bay.com all kinds of power adapters listed just type this in  e-bay search Hp Touchsmart computers ounce e-bay brings up touchsmart computers page keep clicking pass computer pictures pages fast you will get into touchsmarts parts / services. There are alot of old adapters and computer parts listed. Best thig is you set the prise.

  • Need power adapter specs for WRK54G

    I was just given a model WRK54G wireless router that is missing the power adapter. Would someone who owns one of these provide me with the voltage and current output specs for the power adapter? I am guessing that it is 12 volts but would like to avoid doing a smoke test if this information is available. Thanks in advance.

      WRK54G 12V 1A BIG BARREL 110~120V

  • Had Power Adapter replaced, battery icon not showing charge

    Hello, hoping you guys can help me out. Recently, my power adapter had burned out (wouldn't show charge/light up at all). I've had it replaced as of today and is working fine (Whoo!), but now a new problem's come up.
    I admit I used my battery to it's limit while waiting for the new adapter, and while the light on the adapter is green, the battery icon on my screen is showing 0%. Pressing the button on the battery only gives me one green light.
    I've heard something about Re-Calibrating the battery in my manual, but I'm unsure if that's the best course for my case. Here's my Power System Profile, if it helps:
    AC Power:
    System Sleep Timer (Minutes): 10
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 5
    Dynamic Power Step: Yes
    Reduce Processor Speed: No
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: Yes
    Wake On Modem Ring: Yes
    Display Sleep Uses Dim: Yes
    Battery Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 1
    Dynamic Power Step: No
    Reduce Processor Speed: Yes
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On Modem Ring: No
    Display Sleep Uses Dim: Yes
    Reduce Brightness: Yes
    Battery Information:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 3775
    Remaining Capacity (mAh): 0
    Amperage (mA): 0
    Voltage (mV): 9821
    Cycle Count: 56
    AC Charger Information:
    AC Charger (Watts): 65
    Connected: Yes
    Charging: No
    Hardware Configuration:
    Clamshell Closed: No
    UPS Installed: No

    Re-calibrating the battery is typically done with a new battery, where you charge it all the way up, then run it all the way down a couple of times. This calibrates the battery's internal electronics to the actual capacity of the battery. Not a concern here.
    Looking at your battery stats, is your battery fairly new? It is showing 56 charge/discharge cycles, does that sound about right? Reason for asking is, if the battery is old, like maybe the original battery that came with the system, sometimes a dying lithium battery throws up screwy stats. If it is an older battery, that may be why it's not charging ... it's dead. However, if it is a newer battery ....
    There's only 4 components to the charging circuit - power adapter, dc-in card, battery, and logic board. You have a new power adapter, and the system is seeing the 65 watt power adapter, so the power adapter and dc-in card appear to be OK. That leaves either a battery issue or a logic board issue. Do you have another battery you can swap in, or a friend with the same model PowerBook, or an Apple store nearby? If you swap another battery in, and it starts charging, and the current batter is an older one, then replace the battery. I used this one on mine, and others have had good things to say about it: http://eshop.macsales.com/shop/powerbook/battery/g4-15inch-aluminum/ . I would stay away from batteries sold on ebay, as there have been a number of people very disappointed with the lack of quality in the battery they bought.
    If another battery won't charge, that would point to a logic board issue. We just had that on one of our PowerBooks, where it would charge, and it wasn't a power adapter, dc-in, or battery problem. The Apple store sent it off to the Apple Depot, for around $350, and they replaced the logic board as well as the battery. If they do more work, like replacing a dented case, the price goes up. If the Apple store replaces the logic board in the store, it costs around $750 or more.

  • Mac Book Pro 17" 85W Power Adapter too Hot to handle while charging/using

    Hello All,
    I bought a Mac Book Pro 17". What's up with my Power Adapter when I am using the computer at the same time charging it. The Power Adapter gets so hot that it is too hot to handle...very very hot! Is this normal ?
    Any advise is most welcome on the matter.
    Mac Book Pro 17"   Mac OS X (10.4.9)  

    Simple answer, no its not normal
    The adapter should get warm, but not hot
    The first thing i'd do is try it in a different power socket
    If it still heats up like you say regardless of where you plug it in, then its a fault in the adapter
    return it to apple or an apple reseller and get another one
    i wouldn't use it any more as it could be dangerous to your computer and become a fire hazzard

  • 6 Plus Charging Question:Is it safe to use a 12w power adapter (from an iPad) to charge an iPhone 6 plus or do I need to stay with the 5w provided in the box? Would the 12w cause any damage to the phone over time?

    Would like to get some additional charging accessories to have for different location and would like them all to be as efficient as possible without doing any damage to the phone. Any thoughts on what I can use?

    Hi TTToth3,
    As you will see from the article below, your 12w iPad charger is perfectly fine to use with your iPhone:
    iPad: Charging the battery
    http://support.apple.com/kb/ht4060
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

Maybe you are looking for

  • CS3 file will not open in CS3 after editing in CS6?!?

    Pardon the exclamations but we're creative folks not techies. After editing a CS3 file in CS6 we are unable to open it in CS3. Looks like CS6 will only save back to CS4? So once edited in CS6 then I can no longer use CS3 to work with the files? Can a

  • Problem with iWorks attachments

    I recently purchased the latest version of iWorks so that I can send attachments to my iPhone 3G, but I have not been able to open any attachments saved in any of the iWorks formats (.numbers, .pages or .key). The files have the proper extensions and

  • Help catalyst control center

    message comes up: catalyst control center host application has stopped working. Videos sound but no picture?

  • Titles and Credits

    When creating titles and credits when you open the programme is it possible to set a default font other than "Lucide Grande" ? If so, how please?

  • Windows 8.1 - "explorer.exe - Application Error" during shutdown process

    Hi, After I upgrade to Window 8.1, i get "explorer.exe - Application Error" dialog every shutdown. It contain: "The instruction at 0x74fd40b9 referenced memory at 0x00000000. The memory could not be read. Click OK to terminate the program Click on CA