Need (procedure or function or sql query )for Email filter

Hi All,
in (procedure or function or sql query ) ,if i pass the a input parameter like (anbu@y or anbu@ or anbu@yahjjj ) ,i need to get output like [email protected] .
please give me code for this ...

SQL> with t
2 as
3 (
4 select 'anbu@y' email from dual union all
5 select 'anbu@' from dual union all
6 select 'anbu@yahjjj' from dual
7 )
8 select email, regexp_replace(email, '@.*','@yahoo.com') email_new
9 from t
10 /
EMAIL
EMAIL_NEW
anbu@y
[email protected]
anbu@
[email protected]
anbu@yahjjj
[email protected]

Similar Messages

Function returning SQL query for mutiple series in a chart

Hi,
I would like to know if there is a way to specify a single PL/SQL function returning the queries for multiple series in a 2D Line Flash Chart. I have multiple series in my chart that has different values in the where clause. I can write a PL/SQL function that can return all these queries in one shot. Is there anyway that I can specify this function as returning the queries for all the series in the chart?
As an example, assume that I am using the following three queries for the series in my chart:
select deptno, count(*) from emp where deptno = 10 group by deptno
select deptno, count(*) from emp where deptno = 20 group by deptno
select deptno, count(*) from emp where deptno = 30 group by deptno
I can't write a PL/SQL function that returns a query in the multiple series syntax (SELECT link, label, series_1_value [, series_2_value [, ...]]FROM ...) as I am using an aggregate function and my where clause is different for each series.
Thanks,
Rupesh

Hi Roel,
Thanks for your reply. I am already using an analytical function (RATIO_TO_REPORT(COUNT(*)) OVER () ) in my actual report. My problem is that the query for one series differs from the other only in one where clause. I will be able to dynamically able to generate all the queries for all the series in one pl/sql function. But the chart definition screen does not allow us to define a single function that returns queries for the all the series - possibly seperated by some seperator like S1: select.... S2:select and so on.
Regards,
Rupesh

Proxy to JDBC scenario need dynamic sql query for sender .

Hi Experts,
I am developing proxy to jdbc scenario. in this i need to pass dynamic sql query whre we are passing classical method like below.
while we are passing select stmt in constant and mapped with access field and key field mapped with key field.
MY requirement is like instead of passing select stmt in constant where i can generate dynamically and passed in one field and mapped with access field.

Hi Ravinder,
A simple UDF or use of graphical mapping functions in most cases should provide you everything you need to construct a dynamic SQL statement for your requirement.
Regards,
Ryan Crosby

Error while executing a sql query for select

HI All,
ORA-01652: unable to extend temp segment by 128 in tablespace PSTEMP i'm getting this error while i'm executing the sql query for selecting the data.

I am having 44GB of temp space, while executing the below query my temp space is getting full, Expert please let us know how the issue can be resolved..
1. I dont want to increase the temp space
2. I need to tune the query, please provide your recomendations.
insert /*+APPEND*/ into CST_DSA.HIERARCHY_MISMATCHES
(REPORT_NUM,REPORT_TYPE,REPORT_DESC,GAP,CARRIED_ITEMS,CARRIED_ITEM_TYPE,NO_OF_ROUTE_OF_CARRIED_ITEM,CARRIED_ITEM_ROUTE_NO,CARRIER_ITEMS,CARRIER_ITEM_TYPE,CARRIED_ITEM_PROTECTION_TYPE,SOURCE_SYSTEM)
select
REPORTNUMBER,REPORTTYPE,REPORTDESCRIPTION ,NULL,
carried_items,carried_item_type,no_of_route_of_carried_item,carried_item_route_no,carrier_items,
carrier_item_type,carried_item_protection_type,'PACS'
from
(select distinct
c.REPORTNUMBER,c.REPORTTYPE,c.REPORTDESCRIPTION ,NULL,
a.carried_items,a.carried_item_type,a.no_of_route_of_carried_item,a.carried_item_route_no,a.carrier_items,
a.carrier_item_type,a.carried_item_protection_type,'PACS'
from CST_ASIR.HIERARCHY_asir a,CST_DSA.M_PB_CIRCUIT_ROUTING b ,CST_DSA.REPORT_METADATA c
where a.carrier_item_type in('Connection') and a.carried_item_type in('Service')
AND a.carrier_items=b.mux
and c.REPORTNUMBER=(case
when a.carrier_item_type in ('ServicePackage','Service','Connection') then 10
else 20
end)
and a.carrier_items not in (select carried_items from CST_ASIR.HIERARCHY_asir where carried_item_type in('Connection') ))A
where not exists
(select *
from CST_DSA.HIERARCHY_MISMATCHES B where
A.REPORTNUMBER=B.REPORT_NUM and
A.REPORTTYPE=B.REPORT_TYPE and
A.REPORTDESCRIPTION=B.REPORT_DESC and
A.CARRIED_ITEMS=B.CARRIED_ITEMS and
A.CARRIED_ITEM_TYPE=B.CARRIED_ITEM_TYPE and
A.NO_OF_ROUTE_OF_CARRIED_ITEM=B.NO_OF_ROUTE_OF_CARRIED_ITEM and
A.CARRIED_ITEM_ROUTE_NO=B.CARRIED_ITEM_ROUTE_NO and
A.CARRIER_ITEMS=B.CARRIER_ITEMS and
A.CARRIER_ITEM_TYPE=B.CARRIER_ITEM_TYPE and
A.CARRIED_ITEM_PROTECTION_TYPE=B.CARRIED_ITEM_PROTECTION_TYPE
AND B.SOURCE_SYSTEM='PACS'
Explain Plan
==========
Plan
INSERT STATEMENT ALL_ROWSCost: 129 Bytes: 1,103 Cardinality: 1
     20 LOAD AS SELECT CST_DSA.HIERARCHY_MISMATCHES
          19 PX COORDINATOR
               18 PX SEND QC (RANDOM) PARALLEL_TO_SERIAL SYS.:TQ10002 :Q1002Cost: 129 Bytes: 1,103 Cardinality: 1
                    17 NESTED LOOPS PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 129 Bytes: 1,103 Cardinality: 1
                         15 HASH JOIN RIGHT ANTI NA PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 129 Bytes: 1,098 Cardinality: 1
                              4 PX RECEIVE PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 63 Bytes: 359,283 Cardinality: 15,621
                                   3 PX SEND BROADCAST PARALLEL_TO_PARALLEL SYS.:TQ10001 :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
                                        2 PX BLOCK ITERATOR PARALLEL_COMBINED_WITH_CHILD :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
                                             1 MAT_VIEW ACCESS FULL MAT_VIEW PARALLEL_COMBINED_WITH_PARENT CST_ASIR.HIERARCHY :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
                              14 NESTED LOOPS ANTI PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 65 Bytes: 40,256,600 Cardinality: 37,448
                                   11 HASH JOIN PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 65 Bytes: 6,366,160 Cardinality: 37,448
                                        8 BUFFER SORT PARALLEL_COMBINED_WITH_CHILD :Q1002
                                             7 PX RECEIVE PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 1 Bytes: 214 Cardinality: 2
                                                  6 PX SEND BROADCAST PARALLEL_FROM_SERIAL SYS.:TQ10000 Cost: 1 Bytes: 214 Cardinality: 2
                                                       5 INDEX FULL SCAN INDEX CST_DSA.IDX$$_06EF0005 Cost: 1 Bytes: 214 Cardinality: 2
                                        10 PX BLOCK ITERATOR PARALLEL_COMBINED_WITH_CHILD :Q1002Cost: 63 Bytes: 2,359,224 Cardinality: 37,448
                                             9 MAT_VIEW ACCESS FULL MAT_VIEW PARALLEL_COMBINED_WITH_PARENT CST_ASIR.HIERARCHY :Q1002Cost: 63 Bytes: 2,359,224 Cardinality: 37,448
                                   13 TABLE ACCESS BY INDEX ROWID TABLE PARALLEL_COMBINED_WITH_PARENT CST_DSA.HIERARCHY_MISMATCHES :Q1002Cost: 0 Bytes: 905 Cardinality: 1
                                        12 INDEX RANGE SCAN INDEX PARALLEL_COMBINED_WITH_PARENT SYS.HIERARCHY_MISMATCHES_IDX3 :Q1002Cost: 0 Cardinality: 1
                         16 INDEX RANGE SCAN INDEX PARALLEL_COMBINED_WITH_PARENT CST_DSA.IDX$$_06EF0001 :Q1002Cost: 1 Bytes: 5 Cardinality: 1

Report- Pl/sql function returning sql query parsing page items as text?

Hi Team,
I am facing a strange issue .
I have four page items namely
1)JOB_CODE
2)MIN_EXP
3) MAX_EXP
4) SOURCES1
I have a report of the type "Pl/sql function returning sql query"
declare
v_sql varchar2(4000);
begin
if (:JOB_CODE IS NOT NULL and :MIN_EXP IS NOT NULL and :MAX_EXP IS NOT NULL and :SOURCES1 IS NOT NULL) then
v_sql:= 'select v_candidate_id, v_fname,v_current_employer,v_Experience_years from candidature where V_REQUIREMENT = :JOB_CODE and v_experience_years >= :MIN_EXP and v_experience_years <= :MAX_EXP and source like ' || '''' || '%'|| ':SOURCES1' || '%' || '''';
elsif (:JOB_CODE IS NULL and :MIN_EXP IS NOT NULL and :MAX_EXP IS NOT NULL and :SOURCES1 IS NOT NULL) then
v_sql := 'select v_candidate_id, v_fname,v_current_employer,v_Experience_years from candidature where v_experience_years >= :MIN_EXP and v_experience_years <= :MAX_EXP and source like ' || '''' || '%'|| ':SOURCES1' || '%' || '''';
elsif (:MIN_EXP IS NULL and :JOB_CODE IS NOT NULL and :MAX_EXP IS NOT NULL and :SOURCES1 IS NOT NULL) then
v_sql := 'select v_candidate_id, v_fname,v_current_employer,v_Experience_years from candidature where v_experience_years <= :MAX_EXP and V_REQUIREMENT = :JOB_CODE and source like ' || '''' || '%'|| ':SOURCES1' || '%' || '''';
elsif (:MAX_EXP is null and :JOB_CODE IS NOT NULL and :MIN_EXP IS NOT NULL and :SOURCES1 IS NOT NULL) then
v_sql := 'select v_candidate_id, v_fname,v_current_employer,v_Experience_years from candidature where V_REQUIREMENT = :JOB_CODE and v_experience_years >= :MIN_EXP and source like ' || '''' || '%'|| ':SOURCES1' || '%' || '''';
end if;
insert into query_list values (v_sql);
insert into debug values (:JOB_CODE , :MIN_EXP , :MAX_EXP , :SOURCES1);
return v_sql;
end;
Please not that I am insertin the query into a table called Query_list and the page item values into the table called Debug thru the pl/sql function which returns teh query.
Now I select the data from the debug tables.
select unique(query) from query_list;
select v_candidate_id, v_fname,v_current_employer,v_Experience_years from candidature where V_REQUIREMENT = :JOB_CODE and v_experience_years >= :MIN_EXP and v_experience_years <= :MAX_EXP and source like '%:SOURCES1%'
select * from debug;
JOBCODE     MINEX     MAXEX     SOURCE
21     1     10     donkeyHire
And if I run the query in sql I get some records returned
select v_candidate_id, v_fname,v_current_employer,v_Experience_years from candidature where V_REQUIREMENT = 21 and v_experience_years >= 1 and v_experience_years <= and source like 'donkeyHire'
V_CANDIDATE_ID     V_FNAME     V_CURRENT_EMPLOYER     V_EXPERIENCE_YEARS
2     Vengu     Andale Tech     4
But the record does not show up in the report!
does this type of report parse page items as text?
Why is it so?
Waiting for an early reply.
Thanks,
venkat

Venkat - You don't want to put ':SOURCES1' in quotes like that.
Scott

Issue with running PL/SQL function returning Sql query

hi, I am trying to create a report region by using the option of PL/SQL function returning sql query.
I notice that it's very slow for the report region page to show up. In my PL/SQL function body, there are only 3 steps, first update all the 10 rows of varchar2 fields to null,then insert values to those fields, then select all from the table to show report results. It takes more than 5 minitues for the page to load up, how ever, if i run those steps in SQL*Plus, it only takes a couple of seconds to finish. Any suggestions?
Thanks,
gina

Sergio, the codes are as followed,
Declare
q varchar2(32767); -- query
Begin
q := 'select "ID",'||
'"ENTRY NAME","TOTAL","#CM","%CM","#CA",'||
'"%CA", from Info_table';
update info_table
set "TOTAL" = '',
"#CM" = '',
"%CM" = '',
"#CA" ='',
"%CA"=''
where "ID"<=10;
// set all data in column Total to null,there is only 10 rows in the table
update info_Table set Total = vTotal,
"#CM" = vCM
(those variables hold user key-in Text filed value)
where ID = 1;
return q;
End;

Problem writing a sql query for a select list based on a static LOV

Hi,
I have the following table...
VALIDATIONS
ID          Number     (PK)
APP_ID          Number
REQUESTED     Date
APPROVED     Date
VALID_TIL     Date
DEPT_ID          Number     (FK)
I have a search form with the following field item variables...
P11_DEPT_ID (select list based on dynamic LOV from depts table)
P11_VALID (select list based on static Yes/No LOV)
A report on the columns of the Validations table is shown based on the values in the search form. So far, my sql query for the report is...
SELECT v.APP_ID,
v.REQUESTED,
v.APPROVED,
v.VALID_TIL,
d.DEPT
FROM DEPTS d, VALIDATIONS v
WHERE d.DEPT_ID = v.DEPT_ID(+)
AND (d.DEPT_ID = :P11_DEPT_ID OR :P11_DEPT_ID = -1)
This query works so far. My problem is that I don't know how to do a search based on the P11_VALID item - if 'yes' is selected, then the VALID_TIL date is still valid. If 'no' is selected then the VALID_TIL date has passed.
Can anyone help me to extend my query to include this situation?
Thanks.

Hello !
Let's have a look at my example:create table test
id        number
,valid_til date
insert into test values( 1, sysdate-3 );
insert into test values( 2, sysdate-2 );
insert into test values( 3, sysdate-1 );
insert into test values( 4, sysdate );
insert into test values( 5, sysdate+1 );
insert into test values( 6, sysdate+2 );
commit;
select * from test;
def til=yes
select *
from test
where decode(sign(trunc(valid_til)-trunc(sysdate)),1,1,0,1,-1)
       =decode('&til','yes',1,-1);
def til=no
select *
from test
where decode(sign(trunc(valid_til)-trunc(sysdate)),1,1,0,1,-1)
       =decode('&til','yes',1,-1);
drop table test; It's working fine, I've tested it.
The above changes to my first idea I did because of time portion of the DATE datatype in Oracle and therefore the wrong result for today.
For understandings:
1.) TRUNC removes the time part of DATE
2.) The difference of to date-values is the number of days between.
3.) SIGN is the mathematical function and gives -1,0 or +1 according to an negative, zero or positiv argument.
4.) DECODE is like an IF.
Inspect your LOV for the returning values. According to my example they shoul be 'yes' and 'no'. If your values are different, you may have to modify the DECODE.
Good luck,
Heinz

On Submit process not firing -report (PL/SQL function returning SQL query)

Can anyone suggest possible causes / solutions for the following problem?
I have a report region that uses a PL/SQL function returning SQL query. The report allows the user to update multiple fields / rows and then click a button to submit the page which should run the On-Submit process to update the database. However the process does not run and I get a 'HTTP404 page cannot be found' error; and when I navigate back using the Back button I cannot then navigate to any other page in my application without getting the same error. The button was created by a wizard selecting the options to submit the page and redirect to a (same) page. The button does not actually have a redirect in its definition but the wizard created a branch to the same page which should work and the button has the text 'submit as SUBMIT' next to it so it appears to be set up correctly.
I have recreated this page several times in my application and I cannot get the On-Submit process to run. However I have created a cut down version of the same page in the sample application on apex.oracle.com at http://apex.oracle.com/pls/otn/f?p=4550:1:179951678764332 and this works perfectly so I am at a loss to understand why it does not work in my application. I cannot post any part of the application itself but if anybody would like to check out page 30 of the sample application (Customer Update Test tab) updating the surnames only, using credentials ja, demo, demo this is pretty much what I have got in my application.
Any ideas would be much appreciated?

Thanks for the suggestions guys. I have now identified that the problem goes away when I remove the second table from my report query. The original report query retrieved data from two tables and the process was updating only one of the tables. I thought I had approached the task logically i.e. first get the report to display the records from the two tables, then get the process to update the first table and finally to modify the process further to update the second table.
Can anyone point me to an example of multiple row updates on multiple tables using a PL/SQL function returning an SQL query?

SQL Query(PL/SQL Function Returning SQL Query)

I am trying to write a dynamic report using SQL Query(PL/SQL Function Returning SQL Query).
I can get the report to run but I need to concatinate some columns into one, seperated by a comma or a dash.
I have tried select *****||','||***** alias
also select *****||'-'||***** alias
but I always get an error.
Is there a way of doing this please
Gus

This is my full query
declare
v_query varchar2(4000);
begin
if :P63_TRAN_INFO = 2 THEN
v_query := 'select
     A.FILENR,
     A.EXERCISENAME,
A.STARTDATE,
A.ENDDATE,
     A.UNIT,
A.ACCADDRESSES, B.ADDRESS, B.ADDRESS_1, B.POST_CODE, B.TOWN,
     A.EXERCISEAREAS,
     A.TOTALVEHICLES,
A.TOTALTROOPS+A.RNTOTALTROOPS+A.RAFTOTALTROOPS TOTALTROOPS,
A.CAR, A.MINIBUS, A.HGV,
A.NAMERANK, A.ADDRESS, A.ADDRESSI, A.ADDRESSII, A.POSTCODE,
A.TRANSIT,
A.INFOONLY
from     BFLOG_AT A, BFLOG_ACCADDRESS B
WHERE A.ACCADDRESSES = B.NAME
AND A.STARTDATE >= :P63_START_DATE
AND A.ENDDATE <= :P63_END_DATE
AND A.AUTHORISED = 1
AND A.INFOONLY = 1' ;
END IF;
RETURN v_query;
END;
This query runs ok, but if I try changing it to the code below with fields concatinated, then it fails
declare
v_query varchar2(4000);
begin
if :P63_TRAN_INFO = 2 THEN
v_query := 'select
     A.FILENR,
     A.EXERCISENAME,
A.STARTDATE,
A.ENDDATE,
     A.UNIT,
A.ACCADDRESSES||','||B.ADDRESS||','||B.ADDRESS_1||','||B.POST_CODE||','||B.TOWN ADDRESS,
     A.EXERCISEAREAS,
     A.TOTALVEHICLES,
A.TOTALTROOPS+A.RNTOTALTROOPS+A.RAFTOTALTROOPS TOTALTROOPS,
A.CAR, A.MINIBUS, A.HGV,
A.NAMERANK, A.ADDRESS, A.ADDRESSI, A.ADDRESSII, A.POSTCODE,
A.TRANSIT,
A.INFOONLY
from     BFLOG_AT A, BFLOG_ACCADDRESS B
WHERE A.ACCADDRESSES = B.NAME
AND A.STARTDATE >= :P63_START_DATE
AND A.ENDDATE <= :P63_END_DATE
--AND (A.EXERCISEAREAS LIKE "GAP, OA, OAL")
--OR (A.EXERCISEAREAS LIKE "Harz")
AND A.AUTHORISED = 1
AND A.INFOONLY = 1' ;
END IF;
RETURN v_query;
END;
Cheers
Gus

Using 'Function Returning SQL Query' with Flash charts

I have created a pl/sql function that returns a SQL query as a varchar2 of this form:
select null link
<x value> value
<Series1 y value> Series 1 Label
<Series2 y value> Series 2 Label
<Series3 y value> Series 3 Label
from tablea a
join tableb b
on a.col = b.col
order by <x value>
If I now call the function from a Flash Chart Series SQL box with the Query Source Type set to 'Function Returning SQL Query' like this:
return functionname(to_date('30-sep-2010', 'dd-mon-yyyy'))
it parses correctly and the page is saved; however, when I run the page I don't get any output - nor any error messages or other indication of a problem.
Now, if I call the function in a SQL client, capture the SQL query output using dbms_output and paste that into the Flash Chart Series SQL box - changing the Query Source Type to SQL Query - and save the page it works fine when I run it and returns a multi-series flash chart.
Can anyone suggest either;
1. What have I might have missed or done wrong?
2. Any way to usefully diagnose the problem...
I have tried using the Apex debugger - which is very nice, by the way - but it doesn't provide any info on what my problem might be. I even tried writing my own debug messages from my function using the apex_debug_message package - got nothing...
Thanks,
Eric

Hi Eric,
Try expressing the source as this:
begin
return functionname(to_date('30-sep-2010', 'dd-mon-yyyy'));
end;That works fine for me, and if I take out the begin-end and the trailing semicolon from the return statement I get the same behavior as you.
It does mention in the help for the source (only during the wizard though) that this source type has to be expressed that way, but I agree it would be helpful if the tool would validate for this format when 'Function Returning SQL Query' is used or give some sort of indication of the trouble. Anyway, this should get you going again.
Hope this helps,
John
If you find this information useful, please remember to mark the post "helpful" or "correct" so that others may benefit as well.

How to create sql query for item master with operator LIKE with variables?

hi all,
How to create sql query for item master with
operator LIKE(Contains,Start With,End With) with variables using query generator in SAP B1 ?
Jeyakanthan

Hi Jeyakanthan,
here is an example (put the like statement into the where field)
SELECT T0.CardCode, T0.CardName FROM OITM T0 WHERE T0.CardName Like '%%test%%'
The %% sign is a wildcard. If you need start with write 'test%%' and otherwise ends with '%%test'. For contains you need '%%test%%'. You also could combinate this statements like 'test%%abc%%'. This means starts with test and contains abc.
Regards Steffen

How to write sql query for below example.

Hi,
I have requirement.
There are number of rows and I need the result through query as follows.Please help me to proved sql query for below mentioned requirement.
example: table TEST.
COLA COLB COLC COLD
MANAGER 5 NULL null
SR.MANAGE 6 3 NULL
VP 5 5 4
I have to write the sql query if COLA IS MANAGER THEN CONSIDER MANGER RECORD,AND IF ANY COLUMN FILED IS NULL FOR MANGER THEN CONSIDER COLA IS SR.MANGER, AND IF ANY COLUMN FILED IS NULL FOR SR,MANGER THEN CONSIDER VP records.
I need output as below.
COLB COLC COLD
5(MANGER) 3(sr.manger) 5(vp)
Please provide the for above mentioned output.
Thanks

<<if COLA IS MANAGER THEN CONSIDER MANGER RECORD>>
What does this sentence means? COLA does not cnatin a single record but the number of records with diffrent values.
Regards
Arun

How to write sql query for below mentioned eaxmple.

Hi,
I have requirement.
There are number of rows and I need the result through query as follows.Please help me to proved sql query for below mentioned requirement.
example: table TEST.
COLA COLB COLC COLD COLE COLF MANAGER 5 NULL NULL 3 NULL
SR.MANAGER 6 3 NULL NULL NULL
VP 5 5 4 5 5
I have to write the sql query if COLA IS MANAGER THEN CONSIDER MANGER RECORD,AND IF ANY COLUMN FILED IS NULL FOR MANGER THEN CONSIDER COLA IS SR.MANGER, AND IF ANY COLUMN FILED IS NULL FOR SR,MANGER THEN CONSIDER VP records.
I need output as below.
COLB COLC COLD COLE COLF
5(manager) 3(sr.manger) 4(vp) 3(manger) 3(vp)
Please provide the for above mentioned output.
Thanks

Duplicate thread. please view the answer posted in your first thread.
how to write sql query.
And, please don't post any duplicate thread.
Regards.
Satyaki De.

OIM sql Query for getting the status of the task which got failed

Hi Everyone,
We have a requirement like we need to get the status of a particular task(say Create User in OID resource - Completed\Rejected status) for the particular user.We are able to get the status of the resource provisioed to the user but not the status of the particular task getting trigerred for the user.can someone put some light on this.We need to get the SQL query for this.
Thanks in Advance.
Regards,
MKN

Hi
Use this sample query to get the task status, also check the cooments
SELECT USR.USR_LOGIN, OSI.SCH_KEY,SCH.SCH_STATUS,STA.STA_BUCKET FROM
OSI,SCH,STA,MIL,TOS,PKG,OIU,USR,OBJ,OST
WHERE OSI.MIL_KEY=MIL.MIL_KEY
AND SCH.SCH_KEY=OSI.SCH_KEY
AND STA.STA_STATUS=SCH.SCH_STATUS
AND TOS.PKG_KEY=PKG.PKG_KEY
AND MIL.TOS_KEY=TOS.TOS_KEY
AND OIU.USR_KEY=USR.USR_KEY
AND OIU.OST_KEY=OST.OST_KEY
AND OST.OBJ_KEY=OBJ.OBJ_KEY
AND OSI.ORC_KEY=OIU.ORC_KEY
AND OBJ.OBJ_NAME='AD User'
AND OST.OST_STATUS = 'Provisioning' -- filter accordinglly
AND STA.STA_BUCKET = 'Pending' -- filter accordinglly
AND PKG.PKG_NAME='AD User' -- filter accordinglly
AND MIL.MIL_NAME='System Validation' ---- filter accordinglly
Thanks,
Kuldeep

How to get a list of values used in the WHERE filter of stored procedures and functions in SQL Server

How can I get a list of values (one or more) used in the WHERE filter of stored procedures and functions in SQL Server?
How can get a list of values as shown (highlighted) in the sample stored procedure below?
ALTER PROC [dbo].[sp_LoanInfo_Data_Extract] AS
SELECT   [LOAN_ACCT].PROD_DT,
              [LOAN_ACCT].ACCT_NBR,
              [LOAN_NOTE2].OFCR_CD,
              [LOAN_NOTE1].CURR_PRIN_BAL_AMT,
              [LOAN_NOTE2].BR_NBR,
INTO #Table1
FROM
                dbo.[LOAN_NOTE1],
                dbo.[LOAN_NOTE2],
                dbo.[LOAN_ACCT]
WHERE
                [LOAN_ACCT].PROD_DT = [LOAN_NOTE1].PROD_DT
                and
                [LOAN_ACCT].ACCT_NBR = [LOAN_NOTE1].ACCT_NBR
                and
                [LOAN_NOTE1].PROD_DT = [LOAN_NOTE2].PROD_DT
                and
                [LOAN_NOTE1].MSTR_ACCT_NBR = [LOAN_NOTE2].MSTR_ACCT_NBR
                and
                [LOAN_ACCT].PROD_DT = '2015-03-10'
                and
                [LOAN_ACCT].ACCT_STAT_CD IN
('A','D')
                and
                [LOAN_NOTE2].LOAN_STAT_CD IN
('J','Z')
Lenfinkel

Hi LenFinkel,
May I know what is purpose of this requirement, as olaf said,you may parse the T-SQL code (or the execution plan), which is not that easy.
I have noticed that the condition values in your Stored Procedure(SP) are hard coded and among them there is a date values, I believe some day you may have to alter the SP when the date expires. So why not declare 3 parameters of the SP instead hard coding?
For multiple values paramter you can use a
table-valued parameter. Then there's no problem getting the values.
If you could elaborate your purpose, we may help to find better workaround.
Eric Zhang
TechNet Community Support

Need (procedure or function or sql query )for Email filter

Similar Messages

Maybe you are looking for