Need project help

Hello everyone,
I am a student and am in the process o f learning Java as part of my syllabus. A part of year work we have to a submit a live project...for that i have chosen a local organization that runs trains and provides electricity.
All the information about the orgztn will be stored in the database like customer their ID and bill, and as for trains the area, frequency, stop name code...etc.....
The customers can access the orgztns info via a mobile phone..so they can enter thier starting point and end point and the train number to borad along with the fare will be given, if the user wishes he can view a graphical route that the train will take to reach the destination(planning to use a JPEG image)...also they can view their electricity bills too and view graphical analysis of their consumption for the past one year....
I ma completely new to J2ME as well as J2EE.....Please guide me as to how will i connnect my mobile J2ME app to my remote server that will in turn connect to database and retrieve the required info and give back to J2ME app.....
how to I go on doing this...please help me as I am totally confused as to how will i build the system???
Thanks for your help.
Regards,
Abigail Venturi

not just a cross-post, he's spamming 3-4 forums with this crap. To the original poster: knock this off!

Similar Messages

Archiving of spool requests (ERS documents) Apprentice Project HELP needed..

Hi guys,
I'm an apprentice from Germany and I have to do a project for my final exams. I could desparetly Need some help on getting started.
In our SRM, we have a program for the Generation of ERS documents (credit note?).
Firstly, the Programm BBPERS creates ERS Idocs on Basis of stock-receipt (?). Secondly, the program RSPPFPROCESS sends the ERS invoice to the supplier via mail.
The document is saved only as an email.
We do have a Z-Programm, ZZBBPERS, that is used for subsequent creation of ERS documents as PDFs. These are saved in the Spool, but for each invoice a different spool number is created.
Now my Task is to find a way to Archive these ERS documents into an external Archive. We use d.3 as Archive, I don't know if you have heard of it. But that shouldn't matter right now.
So the question is, how can this be achieved? I don't really know anything about archiving in SAP. And this is a very Special case. Where do I have to start? Do I Need to write a program, or can I use some of SAPs Standard possiblities? What programs are there for archiving spools? Can they be defined as only archiving Spools from program X? Where do I define archiving procedures?
I hope some of you can get me started. I don't Need a perfect solution right off the bat, just a place to start and ideas how to Approach this Project.
Thanks SO MUCH in advance for any help!
Greetings,
Sebastian

Thank you so much, this brought me a leap Forward.
So the Business object should be the BUS2207, right? This is our Business object for ERS. We don't have BUS2081, what is that?
edit: Wait, what is the difference between Business Object and Archiving Object? We do not have an archiving object vor ERS.
To clarify: We do not book in SRM, we are sending it per Idoc to another SAP System where the booking takes place.
We are just creating the PDF out of the BUS2207 and sending it to the vendor via RSPPFPROCESS and Action "BBP_ERS".
Can you tell me where I can see detailed Information for the Archive Connection? I have the entry in OAC0 with IP address and all. But we have no records of ever archiving in this System so how can I see Connection details and test it?
I also have to analyze if ArchiveLink is already set up and working..
Also, where do I define how the files are saved in the storage System? With this I mean like in which Content repositories / Folders and so on they are saved.
What Information are given to the PDF? All document informations, like Dates invoice number and so on? How can I use them for my Archive structure?
Thanks in advance.

Need urgent help in listing out checklist from DBA prespective for BI Implementation Project

Hello Guys,
We are in Designing phase Data Modeling of PDW/APS Implementation Project.
I need urgent help in making a checklist from a DBA perspective.
Like what are things ill be needing at a time of implementation/Deployment.
Your expert comments and help will be highly appreciated.
Thank you,
Anish.S
Asandeen

You can get good summary of checklist from this article about
DBA checklist for data warehousing.
Which highlights on below pointers:
New system or old. (I.e. Up-gradation vs starting from scratch)
Complexity of SQL Server architecture
SQL Server storage
Determining SQL Server processing power
SQL Server installation consideration
SQL Server configuration parameter
SQL Server security
SQL Server Database property
SQL Server jobs and automation
Protecting SQL Server data
SQL Server health monitoring and check ups
SQL Server ownership and control
based on my real time experience, I will suggest you to keep an eye on
Load performance (It will be useful when your database(Warehouse) will have huge amount of data)
System availability (Check for Windows update and up time configuration)
Deployment methodology should be planned in advance. Development of packages and respective objects should be done systematically.
Source control mechanism
Disk space and memory usage
You might or might not have full rights on production environment, so be prepared to analyze production environment via Select statements [I guess you got my point]
Proper implementation of Landing , Staging and Mart tables.
Column size (this can drastically decrease your database size)
Usage of indexes (Index are good, but at what cost?)
I hope this will assist you in building your check list.

Help: Need Project Business case

Kindly provide me with business case that is related to oracle projects track.
Please help me i need urgent help.
This my mail : [email protected]

You should find plenty of useful information here...
http://www.oracle.com/us/products/applications/ebusiness/projects/index.html

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years. Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge. 180GB plus.
I now have a Macbook Pro and will add an iMac when the new models arrive. For my photos, I want to stay with Photoshop which also gives me the Bridge. The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows. What am I missing and is using iPhoto worth the effort?
If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient. If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward. However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto. In the past, I have experienced syncing problems with, and database errors in, large databases. If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
Some guidance and insight would be appreciated. I have a number of Faces questions which I will save for later.

Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

Letter/report generation...morgalr, i need your help!!

may i know the details or some sample source code of how to generate the html and import it to MS Word...i need your help urgently...may i have your email to contact u?.....please help, it is urgent!!!

You need not use an applet to write an HTML file, any application file will do fine, actually applications may be prefered due to system security and file creation. Basically the html files are just text files using HTML. Look at any book on HTML and you will be able to get the style and form down along with the syntax.
As for calling MS word, do a search on the web for a product called JPrint. It is done by a company called Neva and they also have a product called "coroutine". It is coroutine that you want. Coroutine is a native level interface for Java to Comm. The docs that come with coroutine should be saficient to get you going on the project.

I Need Dire Help Making a Flash Form

Hello, I need some serious help creating a Flash Form.
I Have used a template from another site with the following
input boxes:
Name: __________
Email: __________
Comments: ____________
However, i had the script working fine, along with its php
script,
when i was trying to add more "text" boxes, i must have
messed the script up somhow.
When I submit that form, the name is send and email, but the
email is blank.. ie, there is no "comments"
here is the code:
on submit button:
on (release) {
// send variables in form movieclip (the textfields)
// to email PHP page which will send the mail
form.loadVariables("email.php", "POST");
sent email messege
onClipEvent(data){
// show welcome screen
_root.nextFrame();
and the php script (mailer.php)
php form email.pho
<?php
* PHP 4.1.0+ version of email script. For more
* information on the mail() function for PHP, see
http://www.php.net/manual/en/function.mail.php
// First, set up some variables to serve you in
// getting an email. This includes the email this is
// sent to (yours) and what the subject of this email
// should be. It's a good idea to choose your own
// subject instead of allowing the user to. This will
// help prevent spam filters from snatching this email
// out from under your nose when something unusual is put.
$sendTo = "[email protected]";
$subject = "My Flash site reply";
// variables are sent to this PHP page through
// the POST method. $_POST is a global associative array
// of variables passed through this method. From that, we
// can get the values sent to this page from Flash and
// assign them to appropriate variables which can be used
// in the PHP mail() function.
// header information not including sendTo and Subject
// these all go in one variable. First, include From:
$headers = "From: " . $_POST["firstName"] ." ".
$_POST["lastname"] . "<" . $_POST["email"] .">\r\n";
// next include a replyto
$headers .= "Reply-To: " . $_POST["email"] . "\r\n";
// often email servers won't allow emails to be sent to
// domains other than their own. The return path here will
// often lift that restriction so, for instance, you could
send
// email to a hotmail account. (hosting provider settings may
vary)
// technically bounced email is supposed to go to the
return-path email
$headers .= "Return-path: " . $_POST["email"];
// now we can add the content of the message to a body
variable
$message = $_POST["message"];
// once the variables have been defined, they can be included
// in the mail function call which will send you an email
mail($sendTo, $subject, $message, $headers);
?>
If anyone can see why the "comments" section is not being
sent?
Also: My original problem was how do you add more text boxes.
I want something like this:
Name:
Address:
Phone:
Mobile:
Email:
Website:
Comments:
Ive spent days and days trying to work out how to first make
a form that actually works, then add more text fields
Ive looked at many basic form tutorials, but they all seem to
only have 3 or 4 text fields.. Name, Email, Comments... etc
I haven't a clue how to edit the script both in action script
and php to add more fields easy.
I really need some help with this, its turning into a
nightmare for me.
I can provide someone with my .fla project file if they care
to take a look at what im doing wrong.
Thanks
Pan
ps. Please note: "$sendTo = "[email protected]";" =
this line i know i must put in my own email.

This is all about timelines. It seems there is a movieclip
named 'form' (or possibly an actionscript object, can't tell). Any
variables created on that timeline are sent.
So you could have your new textfields on another timeline.
Or you could have textfields with no instance name in the
form timeline.
Those are the first two things to look at. Post the FLA and
we can tell you more specifically.

Error message - need urgent Help

Hi,
I need some help from you guys, because, when I run my project and try to execute some action, I always get this error message in the Embedded OC4J Server:
forward:WEB-INF/page/S2EpisodiosTable not found on action:/S2EpisodiosTable
Here is part of the code:
14:03:37 DEBUG (JhsActionServlet) -Request class: com.evermind.server.http.EvermindHttpServletRequest
14:03:37 DEBUG (JhsActionServlet) -Request URI: /App_S2-ViewController-context-root/S2EpisodiosTable.do
14:03:37 DEBUG (JhsActionServlet) -Request Character Encoding: windows-1252
14:03:37 DEBUG (JhsActionServlet) -Parameter value: 1
14:03:37 DEBUG (JhsActionServlet) -Parameter event: show
14:03:37 DEBUG (JhsActionServlet) -Parameter partial: true
14:03:37 DEBUG (JhsActionServlet) -Parameter source: S2EpisodiosView1
14:03:37 DEBUG (JhsActionServlet) -Parameter partialTargets: S2EpisodiosView1 messageBox _uixState S2AltaSociais2Header S2CaracSocioDemog4Header S2EntidadeFinaceiras3Header S2HistoriaSociais2Header S2Procedimentos2Header S2ServicoExternos3Header S2SitHabitacionais3Header S2SitSocioProfissionais2Header
14:03:37 DEBUG (JhsDataAction) -Executing action /S2EpisodiosTable
14:03:37 DEBUG (JhsDataAction) -Found existing searchBean for S2EpisodiosUIModel
14:03:37 DEBUG (JhsDataAction) -Stored searchBean for S2EpisodiosUIModel on request
06/07/20 14:03:37 forward:WEB-INF/page/S2EpisodiosTable not found on action:/S2EpisodiosTable
14:03:37 DEBUG (JhsDataAction) -No commit event in request and multiRowUpdateEvent request param not set, multi-row update NOT executed
14:03:37 DEBUG (JhsDataAction) -Storing table binding factory under key jhsTableBindings on request
14:03:37 DEBUG (JhsDataAction) -Forward set by parameter property returned: /WEB-INF/page/S2EpisodiosTable.uix
14:03:39 DEBUG (JhsActionServlet) -Request class: com.evermind.server.http.EvermindHttpServletRequest
14:03:39 DEBUG (JhsActionServlet) -Request URI: /App_S2-ViewController-context-root/S2EpisodiosTable.do
14:03:39 DEBUG (JhsActionServlet) -Request Character Encoding: windows-1252
14:03:39 DEBUG (JhsActionServlet) -Parameter value: 1
14:03:39 DEBUG (JhsActionServlet) -Parameter event: hide
14:03:39 DEBUG (JhsActionServlet) -Parameter partial: true
14:03:39 DEBUG (JhsActionServlet) -Parameter source: S2EpisodiosView1
14:03:39 DEBUG (JhsActionServlet) -Parameter partialTargets: S2EpisodiosView1 messageBox _uixState S2AltaSociais2Header S2CaracSocioDemog4Header S2EntidadeFinaceiras3Header S2HistoriaSociais2Header S2Procedimentos2Header S2ServicoExternos3Header S2SitHabitacionais3Header S2SitSocioProfissionais2Header
06/07/20 14:03:39 forward:WEB-INF/page/S2EpisodiosTable not found on action:/S2EpisodiosTable
14:03:39 DEBUG (JhsDataAction) -Executing action /S2EpisodiosTable
14:03:39 DEBUG (JhsDataAction) -Found existing searchBean for S2EpisodiosUIModel
14:03:39 DEBUG (JhsDataAction) -Stored searchBean for S2EpisodiosUIModel on request
14:03:39 DEBUG (JhsDataAction) -No commit event in request and multiRowUpdateEvent request param not set, multi-row update NOT executed
14:03:39 DEBUG (JhsDataAction) -Storing table binding factory under key jhsTableBindings on request
14:03:39 DEBUG (JhsDataAction) -Forward set by parameter property returned: /WEB-INF/page/S2EpisodiosTable.uix
Can anyone explain me why this is happening?? What can cause this?
Thanks,
Atena
Message was edited by:
Atena

Atena,
We have seen the same error appearing, but it doesn't do any harm. Your application should behave correctly, despite this error message raised by UIX runtime.
Steven Davelaar,
JHeadstart Team.

Need some help in ARCHITECTURE level for upgrading SAP BW 3.5 to SAP BI 7.0

HI all,
I am a consultant in a small company, i am curently handling upgradation project i need some help in ARCHITECTURING this complete project, please share me your knowledge, like process flows what information i need to get from clients before starting the project, what is pre upgradation checks, post upgradation cheks ...............
Thanks in advance.............

Hi,
You need to confirm the downtime during the upgrade activity.
Check for Space and resource allocation.
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8d1a0a3a-0b01-0010-eb82-99c4584c6db3
https://wiki.sdn.sap.com/wiki/display/BI/UpgradefromBW3.XtoBI7.0+%28SP13%29
https://wiki.sdn.sap.com/wiki/display/BI/Migrationof3.xobjectstoBI7.0
You need to make sure some OSS notes should be applied, check the below link for the same:
https://wiki.sdn.sap.com/wiki/display/BI/UpgradetoNetWeaverBI7.0%28SAPNotes+%29
http://wiki.sdn.sap.com/wiki/display/BI/BIUpgradation-HelpfulOSSnotesfromEDWperspective
Hope this helps...
Rgs,
Ravikanth.

Anybody who can help me? I really need your help

I've tried to execute J2ee tutorial examples.
I don't know why this sample didn't execute...I've already finished to set up J2EE and enviornment variables.
I was trying this part from j2ee tutorial titled as "Packing Web modules".
Whenever I type "asant create-war" to make web modules in command window. I always got error.
Packaging Web Modules(From J2ee tutorial for your information)
A web module must be packaged into a WAR in certain deployment scenarios and whenever you want to distribute the web module. You package a web module into a WAR using the Application Server deploytool utility, by executing the jar command in a directory laid out in the format of a web module, or by using the asant utility. This tutorial allows you to use use either the first or the third approach. To build the hello1 application, follow these steps:
In a terminal window, go to <INSTALL>/j2eetutorial14/examples/web/hello1/.
Run asant build. This target will spawn any necessary compilations and will copy files to the <INSTALL>/j2eetutorial14/examples/web/hello1/build/ directory.
To package the application into a WAR named hello1.war using asant, use the following command:
asant create-war
This command uses web.xml and sun-web.xml files in the <INSTALL>/j2eetutorial14/examples/web/hello1 directory.
To learn how to configure this web application, package the application using deploytool by following these steps:
Start deploytool.
Create a web application called hello1 by running the New Web Component wizard. Select FileNewWeb Component.
In the New Web Component wizard:
Select the Create New Stand-Alone WAR Module radio button.
In the WAR File field, enter <INSTALL>/j2eetutorial14/examples/web/hello1/hello1.war. The WAR Display Name field will show hello1.
In the Context Root field, enter /hello1.
Click Edit Contents to add the content files.
In the Edit Contents dialog box, navigate to <INSTALL>/j2eetutorial14/examples/web/hello1/build/. Select duke.waving.gif, index.jsp, and response.jsp and click Add. Click OK.
Click Next.
Select the No Component radio button and click Next.
Click Finish.
Select FileSave.
A sample hello1.war is provided in <INSTALL>/j2eetutorial14/examples/web/provided-wars/. To open this WAR with deploytool, follow these steps:
Select FileOpen.
Navigate to the provided-wars directory.
Select the WAR.
Click Open Module.
I guess this step is for checking my system about setup information. I not sure how to change it.
the result from execution of ansnt command in dos
D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\web\hello1>asant create- war Buildfile: build.xml
j2ee-home-test:
BUILD FAILED D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\common\targets.xml:10: T he j2ee.home property is not properly set in <INSTALL>/j2eetutorial14/examples/c ommon/build.properties.
Set the j2ee.home property to the location of your Application Server installati on.
On Windows, you must escape any backslashes in the j2ee.home property with anoth er backslash or use forward slashes as a path separator. So, if your Application Server installation is C:\Sun\AppServer, you must set j2ee.home as follows:
j2ee.home = C:\\Sun\\AppServer
or
j2ee.home=C:/Sun/AppServer
j2ee.home is currently set to:
Total time: 0 seconds
D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\web\hello1>
I've installed J2ee sdk in C:\Sun\AppServer
PATH: %J2EE_HOME%\bin;%JAVA_HOME%\bin;
CLASSPATH: %J2EE_HOME%\lib\j2ee.jar;C:\Java\jre1.6.0_05\lib\ext\QTJava.zip;C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.jar
J2EE_HOME: C:\Sun\AppServer
JAVA_HOME: C:\Sun\AppServer\jdk
I've installed J2ee with administration 4848, HTTP: 8089 HTTP: 8090
I guess this could refer the target.xml and build.properties. So, I've tried after changing some value, which is fit for my setup.
but, still doesn't work.
targets.xml
<path id="classpath">
<fileset dir="${j2ee.home}/lib">
<include name="j2ee.jar"/>
</fileset>
</path>
<target name="j2ee-home-test" >

<available file="${j2ee.home}/lib/j2ee.jar" type="file" property="j2ee.jar.present" />
<fail unless="j2ee.jar.present">
The j2ee.home property is not properly set in <INSTALL>/j2eetutorial14/examples/common/build.properties.
Set the j2ee.home property to the location of your Application Server installation.
On Windows, you must escape any backslashes in the j2ee.home property with another backslash or use forward slashes as a path separator. So, if your Application Server installation is C:\Sun\AppServer, you must set j2ee.home as follows:
j2ee.home = C:\\Sun\\AppServer
or
j2ee.home=C:/Sun/AppServer
j2ee.home is currently set to: ${j2ee.home}
</fail>
</target>
<target name="clean" >
<delete dir="${build}" />
<delete dir="${dist}" />
<delete dir="${assemble}" />
<delete file="${ear.name}" />
<delete file="${war.name}" />
<delete file="${war.file}" />
<delete file="${client.jar.name}" />
</target>
<path id="db.classpath">
<fileset dir="${db.root}/lib">
<include name="*.jar"/>
</fileset>
</path>
<target name="create-db_common"
depends="init,start-db,delete-db"
description="Create database tables and populate database." >
<sql driver="${db.driver}"
url="${db.url}"
userid="${db.user}"
password="${db.password}"
classpathref="db.classpath"
delimiter="${db.delimiter}"
autocommit="false"
onerror="abort" >
<transaction src="${sql.script}"/>
</sql>
</target>
<target name="delete-db"
description="Deletes the database tables." >
<sql driver="${db.driver}"
url="${db.url}"
userid="${db.user}"
password="${db.password}"
classpathref="db.classpath"
delimiter="${db.delimiter}"
autocommit="false"
onerror="continue" >
<transaction src="${delete.sql.script}"/>
</sql>
</target>
<target name="ping-db"
description="Checks to see if Derby is running." >
<java classname="org.apache.derby.drda.NetworkServerControl"
fork="yes"
resultproperty="db.ping.result">
<jvmarg line="${db.jvmargs}" />
<arg line="ping" />
<classpath refid="db.classpath" />
</java>
<condition property="db.running">
<equals arg1="${db.ping.result}" arg2="0" />
</condition>
</target>
<target name="start-db"
unless="db.running"
description="Starts the Derby databse server."
depends="ping-db">
<sun-appserv-admin
explicitcommand="start-database" />
</target>
<target name="stop-db"
description="Stops the Derby database server."
depends="ping-db"
if="db.running">
<sun-appserv-admin
explicitcommand="stop-database" />
</target>
<target name="admin_command_common">
<echo message="Doing admin task ${admin.command}"/>
<sun-appserv-admin
command="${admin.command}"
user="${admin.user}"
passwordfile="${admin.password.file}"
host="${admin.host}"
port="${admin.port}"
asinstalldir="${j2ee.home}" />
</target>
<target name="create-jdbc-resource_common">
<antcall target="admin_command_common">
<param name="admin.command"
value="create-jdbc-resource
--connectionpoolid ${conpool.name} ${jdbc.resource.name}" />
</antcall>
</target>
<target name="delete-jdbc-resource_common">
<antcall target="admin_command_common">
<param name="admin.command"
value="delete-jdbc-resource ${jdbc.resource.name}" />
</antcall>
</target>
<target name="deploy-war">
<antcall target="admin_command_common">
<param name="admin.command"
value="deploy ${war.file}" />
</antcall>
</target>
<target name="undeploy-war">
<antcall target="admin_command_common">
<param name="admin.command"
value="undeploy ${example}" />
</antcall>
</target>
<property environment="env" />
<target name="listprops"
description="Displays values of some of the properties of this build file">
<property file="../../common/admin-password.txt" />
<echo message="Path information" />
<echo message="j2ee.home = ${j2ee.home}" />
<echo message="j2ee.tutorial.home = ${j2ee.tutorial.home}" />
<echo message="env.Path = ${env.Path}" />
<echo message="env.PATH = ${env.PATH}" />
<echo message="" />
<echo message="Classpath information" />
<echo message="classpath = ${env.CLASSPATH}" />
<echo message="" />
<echo message="Admin information" />
<echo message="admin.password = ${AS_ADMIN_PASSWORD}" />
<echo message="admin.password.file = ${admin.password.file}" />
<echo message="admin.host = ${admin.host}" />
<echo message="admin.user = ${admin.user}" />
<echo message="admin.port = ${admin.port}" />
<echo message="https.port = ${https.port}" />
<echo message="" />
<echo message="Domain information" />
<echo message="domain.resources = ${domain.resources}" />
<echo message="domain.resources.port = ${domain.resources.port}" />
<echo message="" />
<echo message="Database information" />
<echo message="db.root = ${db.root}" />
<echo message="db.driver = ${db.driver}" />
<echo message="db.host = ${db.host}" />
<echo message="db.port = ${db.port}" />
<echo message="db.sid = ${db.sid}" />
<echo message="db.url = ${db.url}" />
<echo message="db.user = ${db.user}" />
<echo message="db.pwd = ${db.pwd}" />
<echo message="url.prop = ${url.prop}" />
<echo message="ds.class = ${ds.class}" />
<echo message="db.jvmargs = ${db.jvmargs}" />
</target>
build.properties ��
j2ee.home=
j2ee.tutorial.home=
asinstall.dir=${j2ee.home}
admin.password.file=${j2ee.tutorial.home}/examples/common/admin-password.txt
admin.host=localhost
admin.user=admin
admin.port=4848
https.port=8181
domain.resources="domain.resources"
domain.resources.port=8080
# Derby configuration settings
db.delimiter=;
db.root=${j2ee.home}/derby
db.driver=org.apache.derby.jdbc.ClientDriver
db.datasource=org.apache.derby.jdbc.ClientDataSource
db.host=localhost
db.port=1527
db.sid=sun-appserv-samples
db.url=jdbc:derby://${db.host}:${db.port}/${db.sid};create=true;
db.user=APP
db.pwd=APP
db.jvmargs=-ms16m -mx32m
Is there anyone who can tell me how to change it? I really need your help....
Thank you in advance.

ok,
First of all make sure your tutorial folder is installed from the root:
C:\javaeetutorial5
or
D:\javaeetutorial5
it makes things so simple.
Secondly:
set your jee tutorial home
JAVAEE.TUTORIAL.HOME =
C:/javaeetutorial5
Thirdly: check in:
C:\javaeetutorial5\examples\bp-project
make a copy of the build.properties.sample save it as build.propropties, as a property file,
edit the properties file as in:
build.properties
As follows:
# uncomment the property javaee.home, and add the path
# to your GlassFish Java EE 5 SDK installation
javaee.home=c:/Sun/SDK
javaee.tutorial.home=c:/javaeetutorial5
# Uncomment the property j2ee.server.username,
# and replace the administrator username of the app-server
javaee.server.username=admin
# Uncomment the property j2ee.server.passwordfile,
# and replace the following line to point to a file that
# contains the admin password for your app-server.
# The file should contain the password in the following line:
AS_ADMIN_PASSWORD=admin1234and so fourth. Some of the settings as the application server name is all done for you
and then test it again.
Take care of editing the property file. It can give you headache.
Note also that this is for application server 9.1 - JEE5.
eve

Need urgent help with HSDIO hardware timing

Hi everyone,
I need urgent help regarding HSDIO hardware timing. I've been working in a project which generating serial ramp using HSDIO pxie device.
I'm using clock rate 40MHz and generating 14 bit of boolean for each step of ramp. And I have to generate simply 256 steps ramp.
Which means, 256 (steps) x 14 (boolean array) x 25 ns (period of 1 boolean value) = 89,6 ns.
What I'm doing right now is with using index of FOR loop as my input data (converting the index into 14bit boolean), then write into pxie device in every iteration,
which means, my data is getting into output in every 1ms time, right? (I'm using windows)
And I want to be able to generate faster than that.
How can I prewrite my 256 steps ramp, then write them all at once into pxie device. I'm really stuck here.
In the picture can you see how I do the write into device in every iteration of FOR Loop.
Regards,
Yan.

hi, thanks for responding.
with using example of dynamic generation with script, I can manage to generate the ramp with controllable delay (generate the whole waveform, including delay with script command, then write to the card).
But I still have 1 question, I can test the output of the generation using oscilloscope and cant see the start delay (I'm writing delay at the start, before generating the ramp). My signal generated at 0 sec.
How can I check this start delay? is there any good example delivered with Labview to check this generation? Somehow I cant use the "dynamic generation and acquisition" example to see my generation (cant figure out how to capture the generated signal).
regards,
Yan.

In need of help to replicate something and then modify it

I need to recreate an image document that is a bit complex and I need to get some direct feedback regarding how exactly to do this. I'm new to Photoshop. Even though I've watched many of the Photoshop training videos I still need further help for this project. I have a sample of what I need to recreate. Unfortunately what I am trying to replicate has already been grouped or flattened, otherwise it would be easy enough to simply replace and modify each layer as needed. Does this make sense? If a seasoned Photo-shopper is available to assist me briefly I'd be most grateful. I may be contacted at [email protected] Many thanks!

Thank you dj. I thought I was on the Photoshop forum so thanks for alerting me:)

In Need of Help Creating an Action

Hello,
I need to create several thousand QR codes and I am trying to work out how to automate it so that I don't have to make them one at a time.
My idea was to download the EVEnX QR Code plugin for Photoshop and then make an action, or series of actions, to make the codes en mass. The information I need in each QR Code is a URL, with each code having a unique one that links to the products serial number.
So, I created a file roughly the size of the QR codes I needed and used vairables to insert the URL on text layer. I was hoping to be able to create an action that would copy that text, open the plugin (which works like a filter), paste the text, create the code and save/close the image.
However, I can't seem to get it to work. I don't know how to make an action to have it highlight the text layer or an action to paste it into the plugin.
Also, the plugin allows you to make a variable of certain information it pulls from the file but the closest I can get to what I need is file name, however I can't make the files named for the URL because of the slashes. They allows you to use file name, file path and the information like size and date.
Sorry for the long post but I HAVE to get this figured out as this project is for work and I am on a time limit. I don't have to use an action, any other way would be fine! I don't have much experience with scripts but if you can walk me through one that would work then I would be happy to try! PLEASE HELP!!!
Thanks!
In Need of Help Creating an Action

Have you checked out Image > Variables and the Help chapter »Creating data-driven graphics« yet?

Exception is thrown "mydb is not bound"(needs urgent help)

We r three students and our final project is a BPM(Business peocess Management)system.
BPM is actually a workflow system(managing the business processes)and all the rules and constraints are applied from the Rule Management System.
we have started the implementation, and therefore we need some help related to the implementation.
We r using EJB2.0 with JBuilder9, JBoss3.2 as the application server and tomcate as the web server.
problem:
I want to create manual database connection using DataSource,
I am using mysql and database name is mydb.
I have done all the reqiured configration of mysql with Joss and it is working.
After getting the initial context, when i try to lookup the datasource, exception is thrown "mydb is not bound"
Initial context is correct because i have tried entity beans asd it works well.
code is
Hashtable contextValues = new Hashtable();
contextValues.put(Context.PROVIDER_URL, "jnp://loopback:1099");
contextValues.put(Context.INITIAL_CONTEXT_FACTORY,
"org.jnp.interfaces.NamingContextFactory");
Context context = new InitialContext(contextValues);
context.lookup("java://mydb");
Kindly help me if u find time,
regards!

try java:comp/env/jdbc/mydb or java:comp/env/mydb

Need urgent help on J2ME Bluetooth.

Hi all,
I really need help about run example code of j2me bluetooth.
I'm doing a MSc project about bluetooth for delivery system, I just want to use bluetooth to send an object to PDA.
I,ve tried example on "Bluetooth for Java" with Atinav library but, it couldn't work.
Do you have an example code that can run on NetBeans 5.0 with
- AvetanaBluetooth Library (purchased)
or
- normal Bluetooth.java library
I need some examples for develop on it. and also please advice me on how to run and test the programs. I really need urgent help Please help me. my email is [email protected] or [email protected]

Hi Hari,
I think that the logic needs to be build up in the DISP part of the Search help exit.
What you can do is also get the Plant in the search help as an export parameter.
Then in the Return Tab you can check if the plant = 'AA', delete the data.
e.g.
      LOOP AT record_tab.
        IF RECORD_TAB-STRING+22(2) = '90'.
          DELETE record_tab INDEX sy-tabix.
        ENDIF.
      ENDLOOP.
Hope this helps.
Regards,
Himanshu
Message was edited by:
        Himanshu Aggarwal

Need project help

Similar Messages

Maybe you are looking for