Need report for these fields

HI,
need to write a report for these fields.
PO number (EKPO_EBELN), Article number (EKPO_MATNR), Vendor part number (EKPO_MFRPN), Description (MAKT_MAKTX), Quantity in Base unit of Measure (EKPO_MENGE) and Quantity in BuyPack unit of measure and Net price (EKPO_BPRME).
Give me it ASAP.
Regards,
Chow.

Naidu,
DATA : Begin of I_EKPO occurs 0,
              MATNR LIKE EKPO_MATNR,
               MFRPN LIKE EKPO_MFRPN,
               MENGE LIKE EKPO_MENGE ,
              BPRME LIKE EKPO_BPRME ,
              MAKTX LIKE MAKT_MAKTX,
            End of I_EKPO.
select EKPO~EBELN
EKPO~MATNR
EKPO~MFRPN
EKPO~MENGE
EKPO~BPRME
MAKT~MAKTX
from ( ekpo inner join makt on
ekpomatnr = MAKTmatnr )
into table I_ekpo
where ebeln in s_ebeln.
Don't forget to reward if useful..

Similar Messages

How to extract data for these fields from R/3 ?

Hi frnds,
My requirement is to extract the following fields which
are related to MM: Condition type, condition
value, Bill of lading, Qty in external delivery note,
Different invoicing party, Invoicing document from R/3 to
BI. But i found that they are not in any purchasing
datasources or inventory datasources ( Except different
invoicing party but the values are not picking up through
standard extractors ).
Anyone please tell me are there any standard datasources for extracting these fields ?
If not, if i want to enhance datasources for these fields
which datasource do i need to enhance i.e
2lis_02_itm,2lis_02_scl,2lis_02_s012 or 2lis_03_bf,
2lis_03_um ?
Full points will be assigned.
Regards,
Bhadri M.

Hi.......
I think you have filled the set up table..........and you have replicate the datasource also.......and after replicating you have activated in the BI side........
Then it should extract the data............
Are you in BI 7.0...........
You try one thing...............
Replicate the datasource again............and then activate the transfer rules using program : RS_TRANSTRU_ACTIVATE_ALL...........
Also check the selection tab of your Infopackage........may be you are giving some selection.........also check if it is coming till PSA..........if it is coming till PSA.....then check your transformation and DTP.......
It may help you...........
Regards,
Debjani..........
Edited by: Debjani Mukherjee on Sep 21, 2008 11:18 AM

Need clarification for these names, R/3, WAS, NetWeaver

Hi All
I posted the question on WAS preview installation, then I realized I should have put it here. Here is the link to that post:
Need clarification for these names, R/3, WAS, NetWeaver
Thanks again for any input
Xueqing
Added the link to the first post
Message was edited by: xueqing Han

Hi Xueqing,
First of all, sorry for any confusion that we have caused you. I hope I can give you an answer that will clear up the confusion. Sorry, but it is a long explanation of the development of two application solution but history tends to be very long winded!
It is not true SAP R/3 Enterprise equals SAP Web AS, and I'll hopefully explain why:
In the beginning (at least in the client server world) SAP only ship SAP R/3. The technology layer under SAP R/3 was called SAP Basis. There was only SAP Basis under SAP R/3.
SAP then started to deliver other software solutions that were not included in or built on the SAP R/3 software. These included SAP Business Information Warehouse, SAP APO, SAP SEM, SAP CRM, and the list goes on.
These solutions needed to run on technology layer (like SAP R/3 did). SAP Basis was the obvious choice for this because of the common technology layer providing DB/OS abstraction and a coding environment.
~2001:
Later there came the need to have SAP Basis support the web and its web standards and other programming languages. This radically changed what SAP Basis was and we decided to rename the new technology layer to SAP Web Application Server (SAP Web AS). So the SAP Basis name was retired and SAP Basis 4.6D was the last release called SAP Basis.
The new release and the "technology change" means that all the applications mentioned above now ran on SAP Web AS. The first release of SAP Web AS was 6.10.
~2002:
SAP Web AS was first used in SAP R/3 Enterprise release .
The important fact is that SAP R/3 Enterprise runs on SAP Web AS. SAP R/3 Enterprise = SAP R/3 business applications + new business functions + SAP Web AS.
~2003:
I hope the above explanation is clear, because technology takes another major change. It was realized that SAP now had a collection of business solutions/applications (SAP R/3, mySAP CRM, mySAP SCM, etc) and a collection of technology solutions (SAP Web AS, SAP BW, SAP EP, etc). The technology requirements for the business solutions did not end at SAP Web AS, they needed portal, data warehouse, knowledge management capabilities, etc to develop business solutions on.
To address this SAP made the decision to combine all the technology solutions and tools into one single platform. This made complete sense for developers (SAP, Partners and customers). This single platform is called SAP NetWeaver. It includes all the old individual components of SAP Web AS, SAP BW, SAP KM, SAP EP, etc).
~2004:
I think you can guess what the next step is. Yes, the new release of SAP R/3. Since the release of SAP R/3 Enterprise and the release of SAP NetWeaver, SAP R/3's name changes. It is now called mySAP ERP as it includes a lot of applications that were previously sold separately (like SAP SEM, MSS, ESS, etc).
So now mySAP ERP runs on SAP NetWeaver (yes everything that was in SAP Basis and then in SAP Web AS is still there but SAP NetWeaver has so much more now).
Also with the release of SAP NetWeaver, SAP starts to stop using the old technology component names - you will not hear us talk about SAP Web AS, SAP BW, etc anymore, just SAP NetWeaver releases.
In addition all the other SAP business applications also run on SAP NetWeaver, so the latest version of mySAP CRM, mySAP SRM, and mySAP SCM all run on SAP NetWeaver.
So to simplify the explanation, it would be :
Evolution of SAP R/3:
SAP R/3 (up to release 4.6c) -> SAP R/3 Enterprise (releases 1.00 through 2.00 -> mySAP ERP (2004 onward)
Evolution of Basis:
SAP Basis (up to release 4.6d) -> SAP Web AS (up to release 6.40 which was included in SAP NetWeaver '04) -> SAP NetWeaver (2004 onward)
SAP NetWeaver and mySAP ERP have their own release cycles. mySAP ERP always has an underlying technology release that it is built on (this is a SAP NetWeaver release)
I hope this helps,
Mike.

Need Report for batch wise consuption

i need the coding (program) for batch wise consuption report,,,
output fields are
Posting date, batch number, quantity, mfg date, exp date, next inspec date, order no(po) , product name, batch no quanty issue.
i want the logic after retriving the data from MSEG table with moment types 101,102,261,262,201,202.
that i should cancle the record of movement type 102 from 101
regards
mukesh

HI Siva,
Thanks for quick reply. Yeah, in S_ALR_87013047 i can compare only two materials. but i am looking for a report for group of materials for forecasting. Can we create acustomised report for this.
Please let me know.
Thanks
vamshi

ALV report for individual fields (urgent...........)

Hi all,
using this ZUS_SDN_THREE_ALV_GRIDS program structure i have generated the all the fields from table.
could you please guide me how to generate the ALV report for splecific fileds from individual tables.
if i click in click on grid1 (that is sales header details) we need populate the item details in grid2 and paralally customer details in grid3.
please guide me how to resolve the issuee..
thanks in advance
Srinivas...

Hi,
I have done an example, like on 1st grid it displays header data (EKKO) and when you double click on any record, for that PO you will get item details (EKPO) on 2nd grid,
In the similar way, you can add one more grid and populate it with your own data simultaneously along with 2nd grid.
*& Report ZOOABAP1_SOW
report zabap2.
* TABLES
tables:ekko.
* DATA DECLARATIONS
data: grid1 type ref to cl_gui_alv_grid,
 grid2 type ref to cl_gui_alv_grid,
 container1 type ref to cl_gui_custom_container,
 container2 type ref to cl_gui_custom_container,
 flag.
* INTERNAL TABLES
data: it_ekko type table of ekko.
data: wa_ekko like line of it_ekko.
data: it_ekpo type table of ekpo.
data: it_fcat1 type lvc_t_fcat,
 wa_fcat1 type lvc_s_fcat,
 it_fcat2 type lvc_t_fcat,
 wa_fcat2 type lvc_s_fcat,
 wa_layout1 type lvc_s_layo,
 wa_layout2 type lvc_s_layo,
 wa_variant type disvariant.
* SELECTION-SCREEN
selection-screen begin of block b with frame title text-s01.
select-options: s_ebeln for ekko-ebeln.
selection-screen end of block b.
* CLASS lcl1 DEFINITION
class lcl1 definition.
public section.
 methods:
 handler_dbl_clk for event double_click
 of cl_gui_alv_grid
 importing e_row.
endclass. "lcl1 DEFINITION
* CLASS lcl1 IMPLEMENTATION
class lcl1 implementation.
method handler_dbl_clk.
 read table it_ekko into wa_ekko index e_row-index.
 if sy-subrc = 0.
 perform get_ekpo.
 endif.
endmethod. "handler_dbl_clk
endclass. "lcl1 IMPLEMENTATION
* START_OF_SELECTION
start-of-selection.
* Get PO header data
perform get_ekko.
* screen for container
call screen 100.
*& Module STATUS_0100 OUTPUT
* text
module status_0100 output.
set pf-status 'PFS'.
set titlebar 'TIT'.
data: obj type ref to lcl1.
if flag is initial.
 create object container1
 exporting
 container_name = 'CONT1'.
 create object container2
 exporting
 container_name = 'CONT2'.
 create object grid1
 exporting
 i_parent = container1.
 create object grid2
 exporting
 i_parent = container2.
 create object obj.
 set handler obj->handler_dbl_clk for grid1.
 perform build_fcat.
 perform build_layout.
 call method grid1->set_table_for_first_display
 exporting
* i_buffer_active =
* i_bypassing_buffer =
* i_consistency_check =
* i_structure_name = 'EKKO'
* is_variant = wa_variant
 i_save = 'X'
* i_default = 'X'
 is_layout = wa_layout1
* is_print =
* it_special_groups =
* it_toolbar_excluding =
* it_hyperlink =
* it_alv_graphics =
* it_except_qinfo =
* ir_salv_adapter =
 changing
 it_outtab = it_ekko
 it_fieldcatalog = it_fcat1
* it_sort =
* it_filter =
* EXCEPTIONS
* invalid_parameter_combination = 1
* program_error = 2
* too_many_lines = 3
* others = 4
 if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 endif.
 flag = 'X'.
endif.
endmodule. " STATUS_0100 OUTPUT
*& Form get_ekko
* text
* --> p1 text
* <-- p2 text
form get_ekko .
select ebeln bsart lifnr
 from ekko
 into corresponding fields of table it_ekko
 where ebeln in s_ebeln.
endform. " get_ekko
*& Form GET_EKPO
* text
* --> p1 text
* <-- p2 text
form get_ekpo .
select ebeln ebelp menge meins peinh from ekpo
 into corresponding fields of table it_ekpo
 where ebeln = wa_ekko-ebeln.
if not it_ekpo[] is initial.
 call method grid2->set_table_for_first_display
exporting
* i_buffer_active =
* i_bypassing_buffer =
* i_consistency_check =
* i_structure_name =
* is_variant =
* i_save =
* i_default = 'X'
 is_layout = wa_layout2
* is_print =
* it_special_groups =
* it_toolbar_excluding =
* it_hyperlink =
* it_alv_graphics =
* it_except_qinfo =
* ir_salv_adapter =
 changing
 it_outtab = it_ekpo
 it_fieldcatalog = it_fcat2
* it_sort =
* it_filter =
* EXCEPTIONS
* invalid_parameter_combination = 1
* program_error = 2
* too_many_lines = 3
* others = 4
 if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 endif.
endif.
endform. " GET_EKPO
*& Module USER_COMMAND_0100 INPUT
* text
module user_command_0100 input.
case sy-ucomm.
 when 'BACK' or 'EXIT' or 'CANC'.
 call method container1->free.
 call method container2->free.
 leave to screen 0.
endcase.
endmodule. " USER_COMMAND_0100 INPUT
*& Form build_fcat
* text
* --> p1 text
* <-- p2 text
form build_fcat .
* fieldcatalog for EKKO table
wa_fcat1-col_pos = '1'.
wa_fcat1-fieldname = 'EBELN'.
wa_fcat1-tabname = 'EKKO'.
wa_fcat1-coltext = 'PO No.'.
append wa_fcat1 to it_fcat1.
clear wa_fcat1.
wa_fcat1-col_pos = '2'.
wa_fcat1-fieldname = 'BSART'.
wa_fcat1-tabname = 'EKKO'.
wa_fcat1-coltext = 'PO Type'.
append wa_fcat1 to it_fcat1.
clear wa_fcat1.
wa_fcat1-col_pos = '3'.
wa_fcat1-fieldname = 'LIFNR'.
wa_fcat1-tabname = 'EKKO'.
wa_fcat1-coltext = 'Vendor No.'.
append wa_fcat1 to it_fcat1.
clear wa_fcat1.
* fieldcatalog for EKPO table
wa_fcat2-col_pos = '1'.
wa_fcat2-fieldname = 'EBELN'.
wa_fcat2-tabname = 'EKPO'.
wa_fcat2-coltext = 'PO No.'.
append wa_fcat2 to it_fcat2.
clear wa_fcat2.
wa_fcat2-col_pos = '2'.
wa_fcat2-fieldname = 'EBELP'.
wa_fcat2-tabname = 'EKPO'.
wa_fcat2-coltext = 'PO Item'.
append wa_fcat2 to it_fcat2.
clear wa_fcat2.
wa_fcat2-col_pos = '3'.
wa_fcat2-fieldname = 'MENGE'.
wa_fcat2-tabname = 'EKPO'.
wa_fcat2-coltext = 'Quantity'.
append wa_fcat2 to it_fcat2.
clear wa_fcat2.
wa_fcat2-col_pos = '4'.
wa_fcat2-fieldname = 'MEINS'.
wa_fcat2-tabname = 'EKPO'.
wa_fcat2-coltext = 'UOM'.
append wa_fcat2 to it_fcat2.
clear wa_fcat2.
wa_fcat2-col_pos = '5'.
wa_fcat2-fieldname = 'PEINH'.
wa_fcat2-tabname = 'EKPO'.
wa_fcat2-coltext = 'Price Unit'.
append wa_fcat2 to it_fcat2.
clear wa_fcat2.
endform. " build_fcat
*& Form build_layout
* text
* --> p1 text
* <-- p2 text
form build_layout .
clear wa_layout1.
wa_layout1-grid_title = 'Header data'.
* wa_layout-sel_mode = 'A'. "allow to select multiple lines
clear wa_layout2.
wa_layout2-grid_title = 'Item Data'.
endform. " build_layout
If you have any poblems while doing this, post it.
Do reward points for all helpful answers
Regards,
Sowjanya

Report For Asset, Field ANBTR01 value problem

hi,
I have created one report for asset.
i used 2 tables ANLZ, ANLA..
but i want to retrive value of ***.acquis.val. and Accm.ord.deprec of Tcode AS92.
But this is showing structure field..
iwant table from where i can retrieve my valu..
plz tel me solution.

Sujeet
Check tables:
ANEP Asset Line Items
AUAI Settlement Amounts per Depreciation
Thanks
Amol Lohade

Maintain separate table for these fields

I want to maintain separate table for this fields.
1. Sales order number
2.item number
3.material
4.qty pricing date price change date if u user changes price manually.
5. Order price
6.sales value
Where will we get these fields from which table.

Hi,
1. Sales order number = VBAK-VBELN
2.item number = VBAP-POSNR
3.material = VBAP-MATNR
4.qty pricing date price change date if u user changes price manually.
Qty from VBAP-KWMENG
Price date = VBKD-PRSDT
Change Date = VBAK-AEDAT
5. Order price = VBAK-NETWR
Thanks,
Mandar

Need Solutions for these Errors

Hello Group !
 How are you people there.Iam very much thank full to you people for your constant support.
I need solution to these errors:
 1.SID missing.
 2.Idocs Missing or No Idocs arrived from source
 System.
 3.Errors in the source system
 4.Missing messages at transfer rules or
 Update rules.
 5.Data sent but not received.
 6.Errors in the source system.
 Have a nice week end
 Vijay

Hi,
1. Missing SIDS : Mostly occurs due to missing master data or if error records are parked and not loaded susequently, or if Master data is not loaded before loading Transaction data. You need to fix these situations.
2. Missing Idocs -Canbe due to idocs getting stuck, rfc connection failures, bad idocs, partner profies missing or deactivated. need to correct these errors on the source side.
3.Source system errors - Jobs on source system failed or are slow.idoc errors. Source system crashing. Problems in generic extractions. Problems with update jobs. Data not getting posted to Delta queues. Data not coming through correctly after DS enhancement. Data posting errors to infostructures are some of the errors you'll face on the source system side.
4. Missing messages again can be due to jobs being slow, processes being killed, or warning messages. Need to treat the warning messages or reset the job.
5. Can be due to IDOC errors. Goto SM58 and push data packets from there on the source system side or due to IDOC errors.
6. Same as 3.
Cheers,
Kedar

Need tables for the fields

Hi,
        I want to know the tables where these fields can be available...
     Field SERNR1 - Serial Number
     Field MATNR1 Assy Matl
     Field SERNR Assy Serial NO
     Field ARKTX Assy Description
Pls let me know as soon as possible..

Hi,
check table vbap / VBRP/ LIPS , in those tables you can get
ARKTX,MATNR,SERNR fields.
But there is no field with the name sernr1 in standard databse tables. May be that you can find in customized tables created specific to your project.that we cant see .
but about matnr1 you can get in the following tables.
VCRSELA_RES      Cross Selling Analysis: Results
HBSRLS           Affected Building List
Regds
Sivaparvathi
Please reward points if helpful...
Edited by: Siva Parvathi on Dec 20, 2007 11:34 AM

I want the table names for these fields

Customer ID.
     Material Number
     Cross company Purchase Order.
     Delivery date (requested by the company who is placing the purchase order).
     Qty requested.
     Value of the Qty requested     (Value of the Qty requested = Qty requested * Material unit price )
     Currency
     Total pieces shipped (during the time frame set on the report)
     Balance Left ( Balance Left = Qty Requested - Total pieces shipped)
     Value of the balance left      Value of the balance left = Balance left * Unit price only if the Balance left is greater than cero,
                    if the balance left is lower than or equals cero, the value of the balance left show be cero.
     % Delivery      (% Delivery = Total pieces shipped / Qty requested).

Ravi,
OK.
You can look to tables EKPO, EKKO for PO-related fields.
Look to SE84 under   ABAP Dictionary > Fields > Table Fields   - This is search tool for existing names. Or can create custom Y-   and Z- fields, data elements, domains to meet your needs.
Please reward points.

Hi need info for these programs

Hi ,
I am making a data upload for time management system wherein the time recording data is fetched .
I just came to know about these two programs ,
RPTCC106
SAPCDT45.
Can anyone please tell me, if we use these programs somehow if we r not having time evaluation in our scope . What I mean to say is we r not running the time evaluation program .
We are presently planning for a BDC , since our time recording device is not intelegent enough to manage the data . Can there be any other possible method for this upload as it needs to be scheduled for every hour ?
Regards

hi,
correct answers are marked as **************
Tabstrip must contain which one of the following?
a) Menu
b) PAI
c)subscreen***********
d)GUI
e)PBO
which program can be used to release BDC sessions within a job?
Background jobs viewed in SM50 are of which process type?
a)DIA************
b)BTC
c)UPD
d)BKG
e)SPO
which one of the following transaction types is INVALID?
a)Report
b)Dialog
c)Variant
d)Modal
e)Area*************
which extension of the open statement is used to read in
raw data,such as a picture file(.jpg)?
a)in binary mode
b)in picture mode*******************
c)in text mode
d)in raw mode
e)in ASCII mode
which INCLUDE contains standard subroutines used in BDC program?
A)BDCRECXX
B)BDCSUBMIT
C)RSBDCSUB************
D)RSBDCINC
E)BDCINCLUDE

[OIM] Need report for a user that unlock another one

Great people of OIM realm..
I need to make a report that can discern about users that were unlocked by an administrator, or by OIM for example, one that pass the challenge-response. Do you know if is there in some part of the data model, a query I can make so I can display USER-DATE_OF_UNLOCK-BY_WHO?
Thanks!

Hi Babu,
Please check out this Blog
/people/sap.user72/blog/2005/02/23/raising-exceptions-in-sap-xi-mapping
Also check these blogs ...
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
ALERTS STEP BY STEP MICHAL
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
ALERTS TROUBLE SHOOTING MICHAL
/people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
Reconciliation of messages in BPM
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Triggering XI alerts from user defined function
Thanks,
Aby

SQVI report for 3 fields

Hi friends,
I want to create a SQVI report in which the query is to give out put for "MATERIAL NUMBER AND G/L account AND MATERIAL TYPE"
I understand that material number and G/L account are not linked directly. Could anyone please help me in identifying the tables name with which i can link above three fields?
Regards,
Bis

You need to get from the below tables
Material Number -- MARA
Material Type -- MARA
Valuation class -- MBEW
GL Account -- T030

Need Report for gross profit anaylsis for the month

Hi gurus,
i need this report coding as the client has not provided me much information regarding this.selection screen.Company code ,plant code,materialcode,material type,period,fiscal year.this report format should be in alv .
Sp pls send me the coding for this.
Urs
pradeep

Check below transaction codes and it may be useful
Customer Analysis- Sales - MC+E
Customer Analysis- Cr. Memo - MC+I
Deliveries-Due list - VL04
Billing due list - VF04
Incomplete Billing documents - MCV9
Customer Analysis-Basic List - MCTA
Material Analysis(SIS) - MCTC
Sales org analysis - MCTE
Sales org analysis-Invoiced sales - MC+2
Material Analysis-Incoming orders - MC(E
General- List of Outbound deliveries - VL06f
Material Returns-Analysis - MC+M
Material Analysis- Invoiced Sales - MC+Q
Thanks
Seshu

Need help for "Numeric field Overflow" error in excel 2003.

Hello,
a friend of mine have a problem exporting Business Objects 5.1.8 to excel 2003 (turning on windows 2000).
Each time she want to export her reporting in excel format (.XLS), she obtain a "Numeric field Overflow (3349)" error.
So, she export in .CSV format, but it's not easy to use for her following tasks.
What could she do ?
Does she do an "update" to newer version of B.O., or there are a solution at her problem ??
Thanks in advance.
Nicolas
P.S.: I searched for solution on this forum, but found nothing.
Edited by: Nicolas Kowarski on Sep 28, 2008 10:16 PM

Hello Nicolas,
Please post this query to the [Legacy Products|SAP BusinessObjects BI Legacy Products; forum.
That forum is dedicated to topics related to legacy products such as Business Objects Enterprise 5.x and 6.x.
The forum is monitored by qualified technicians and you will get a faster response there.
Also, all Legacy Product queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

Need report for these fields

Similar Messages

Maybe you are looking for