Need Report Ran Date on Adhoc Reports
Hi All,
I need the report execution date on adhoc report (SSRS 2005/ Report Builder 1.0).
I was trying to use formula in text box, But, unfortunately it did not worked.
Kindly update if it is possible to show report ran date on adhoc report.
Thanks in Advance.
Regards
Kumud
Try SSRS Ad Hoc Web Reporting. It is super easy to use and even a ten year old kid can create SSRS reports with it. You can also use it to create and modify SSRS reports from your mobile devices such as IPad, IPhone, Android Phone or Surface.
See this youtube on how easy SSRS reports can be creates.
http://www.youtube.com/watch?v=CxQLX5UxIik
You may try it yourself.
http://www.ssrsreporting.com
Similar Messages
-
?
it was lost and to report a claim i need the exact date it was stolen
So was it lost or was it stolen???? When was the last time you remember having the device? Simply use that date. -
Hi Friends,
Need report to list the system name, client status, client version, OU name info for a particular collection of systems.
Please help as it would be appreciated much as i am not familiar with creating custom reports in SCCM. Thanks.
Regards,
ThangarajSelect v_R_System.Name0, v_R_System.Client_Version0, v_RA_System_SystemOUName.System_OU_Name0,
case when v_R_System.Client0 = '1' then 'Client is Installed'
else 'Client Not Installed'
end as 'Client Status'
FROM v_R_System JOIN v_RA_System_SystemOUName ON v_R_System.ResourceID = v_RA_System_SystemOUName.ResourceID WHERE System_OU_Name0 LIKE '%HR'
John Marcum | Microsoft MVP - Enterprise Client Management
My blog: System Center Admin | Twitter:
@SCCM_Marcum | Linkedin:
John Marcum -
Blue Screen on Satellite P100 - need to recover data
On switching on my laptop yesterday I was faced with a blue screen error message which even after running chkdisk keeps on appearing, even when rebooting in safe mode.
The problem is I only have Toshiba recovery disks (not an XP disk - XP was pre-installed on the laptop) and they say on them using the recovery disk wipes the computer and I need to recover data on the hard drive before reformatting.
I've taken the laptop to the local repair centre and they say they have to reformat and dont do data recovery.
Any suggestions gratefully received.Thanks very much for your replies and apologies for the delay in replying but I have only just managed to get my laptop reconfigured and get back online!!!
I took the laptop to the local Toshiba repair centre and they ran some tests and said that there was no problem with the hardware. However, when I took the machine to a specialist company to get the data recovered they reported 'serious errors in the file allocation table'. They managed to recover most of my data but when the hard drive was re-formatted the problems returned so I had to purchase a new hard drive which wasnt cheap.
My laptop is under warranty and I am a little annoyed that they said there was no problem with the hard drive when there patently was. I would like to reocover the money from Toshiba spent on the drive. (laptop under warranty)
Many thanks in anticipation.
Sean -
1.I have an internal table <b>it_vbak</b> with fields <b>vbeln & auart</b>
2. Select-options: <b>s_auart</b> for <b>vbak-auart</b>
3. I need to retrieve data into <b>it_vbak</b> with the following condition :
VBAK-VBELN = VBFA-VBELV and
VBFA-VBELN = LIKP-VBELN and
( VBTYP_N = 'J' or VBTYP_N ) and
(VBTYP_V ='C' or VBTYP_V ='I') and VBAK-AUART in s_auart.
If I use Inner Join I can't use in s_auart.
...Please let me knowhi,
make use of for all entries
first fetch the data from vbak where auart in s_auart(it_vbak_
and the pass it to vbfa(it_vbfa)using for all entries
the pass vbfa to likp using for all entries(it_likp)
then take one final internal table (it_final) and populate final internal table.
check this example for reference: my requirement si little bit different
*& Report ZRSDREPORT
REPORT ZRSDREPORT LINE-SIZE 230
NO STANDARD PAGE HEADING
MESSAGE-ID ZZ.
Author : Sudha Rani Pathuri *
Date : 07/04/2007 *
Title : DELIVERY STATUS REPORT *
Program Type : Executable Program *
Tables Used: : VBAK,VBAP,LIKP,LIPS,VBFA,VBUP *
Purpose : This report gives the status od the delivery *
based on sales order data *
*& TABLES DECLARATION *
TABLES : VBAK,VBPA,LIKP.
declaraing TYPEPOLL SLIS *
TYPE-POOLS : SLIS.
*& SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN :SKIP 2.
SELECT-OPTIONS: S_VKORG FOR VBAK-VKORG NO-EXTENSION,
S_VTWEG FOR VBAK-VTWEG NO-EXTENSION,
S_SPART FOR VBAK-SPART NO-EXTENSION,
S_KUNNR FOR VBPA-KUNNR,
SO_KUNNR FOR VBPA-KUNNR,
S_VBELN FOR LIKP-VBELN NO-EXTENSION,
S_ERDAT FOR LIKP-ERDAT OBLIGATORY NO-EXTENSION,
SO_ERDAT FOR VBAK-ERDAT NO-EXTENSION.
SELECTION-SCREEN :SKIP 2.
SELECTION-SCREEN END OF BLOCK B1.
*& TYPES DECARATION *
*--types declaration for capturing vbeln from vbak
TYPES : BEGIN OF TY_VBELN,
VBELN TYPE VBELN, "Sales Doc No
END OF TY_VBELN,
*--types declaration for vbap
BEGIN OF TY_VBAP,
VBELN LIKE VBAP-VBELN, "Sales Document
POSNR LIKE VBAP-POSNR, "Sales Document Item
MATNR LIKE VBAP-MATNR, "Material Number
KWMENG LIKE VBAP-KWMENG, "Cumulative order quantity in
"sales units
KDMAT LIKE VBAP-KDMAT, "Material Number Used by Customer
END OF TY_VBAP,
*--types declaration for vbfa
BEGIN OF TY_VBFA,
VBELV LIKE VBFA-VBELV, "Preceding sales and distribution
"document
POSNV LIKE VBFA-POSNV, "Preceding item of an SD document
VBELN LIKE VBFA-VBELN, "Subsequent s and d document
POSNN LIKE VBFA-POSNN, "Subsequent item of an SDdocument
END OF TY_VBFA,
*--types declaration for likp
BEGIN OF TY_LIKP,
VBELN LIKE LIKP-VBELN, "Delivery no
END OF TY_LIKP,
*--types declaration for lips
BEGIN OF TY_LIPS,
VBELN LIKE LIPS-VBELN, "Delivery
POSNR LIKE LIPS-POSNR, "Delivery item
MATNR LIKE LIPS-MATNR, "Material Number
LFIMG LIKE LIPS-LFIMG, "Actual quantity delivered (in
sales units)
vgbel LIKE lips-vgbel, "Document number of the reference
"document
END OF TY_LIPS,
*--types declaration for vbup
BEGIN OF TY_VBUP,
VBELN LIKE VBUP-VBELN, "Sales and Distribution Document
"Number
POSNR LIKE VBUP-POSNR, "Item number of the SD document
LFSTA LIKE VBUP-LFSTA, "Delivery status
WBSTA LIKE VBUP-WBSTA, "Goods movement status
FKSTA LIKE VBUP-FKSTA, "Billing status of delivery
"related billing document
END OF TY_VBUP,
*--types declaration for final internal table for diplaying purpose
BEGIN OF TY_FINAL,
VBELN(10) TYPE C,
POSNR LIKE VBAP-POSNR,
MATNR LIKE VBAP-MATNR,
KWMENG LIKE VBAP-KWMENG,
KDMAT LIKE VBAP-KDMAT,
VBELN1 LIKE LIKP-VBELN,
POSNR1 LIKE LIPS-POSNR,
LFIMG LIKE LIPS-LFIMG,
MATNR1 LIKE LIPS-MATNR,
DS(25) TYPE C,
END OF TY_FINAL.
*& CONSTANTS DECARATION *
CONSTANTS: C_DTYPE TYPE C VALUE 'J'.
*& INTERNAL TABLE DECARATION *
DATA : I_VBELN TYPE STANDARD TABLE OF TY_VBELN WITH HEADER LINE,
I_VBAP TYPE STANDARD TABLE OF TY_VBAP WITH HEADER LINE,
I_VBFA TYPE STANDARD TABLE OF TY_VBFA WITH HEADER LINE,
I_LIKP TYPE STANDARD TABLE OF TY_LIKP WITH HEADER LINE,
I_LIPS TYPE STANDARD TABLE OF TY_LIPS WITH HEADER LINE,
I_VBUP TYPE STANDARD TABLE OF TY_VBUP WITH HEADER LINE,
I_FINAL TYPE STANDARD TABLE OF TY_FINAL WITH HEADER LINE.
*& FIELDCATALOG DECARATION *
DATA : I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
W_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
LT_SORT TYPE SLIS_T_SORTINFO_ALV,
I_LAYOUT TYPE SLIS_LAYOUT_ALV.
*& START-OF-SELECTION *
START-OF-SELECTION.
*--for fetching slaes and delivery data
PERFORM GET_DATA.
*--populating the data into one internal table for output
PERFORM POPULATE_FINAL.
*--for displaying the data using alv
PERFORM CALL_ALV.
*& Form get_data
FORM GET_DATA .
*--for retrieving vbeln from VBAK or VbAP
PERFORM GET_VBELN.
*--retrieving data from VBAP
PERFORM GET_VBAP.
*--fetching delivery document details using VBFA.
PERFORM GET_VBFA.
*--fetching delivery data from LIKP
PERFORM GET_LIKP.
*--fetching delivery data from LIPS
PERFORM GET_LIPS.
*--fetching data from VBUP
PERFORM GET_VBUP.
ENDFORM. " get_data
*& Form get_vbeln
FORM GET_VBELN .
*--retrieving vbeln from either VBAK or VBPA
*--checking whether payer or sold to values in the selection-screen or
give or not
IF S_KUNNR IS INITIAL OR SO_KUNNR IS INITIAL.
*--select statement for retrieving vbeln from vbak
SELECT VBELN
FROM VBAK
INTO TABLE I_VBELN
WHERE VKORG IN S_VKORG AND
VTWEG IN S_VTWEG AND
SPART IN S_SPART AND
ERDAT IN S_ERDAT.
IF SY-SUBRC = 0.
SORT I_VBELN BY VBELN.
ELSE.
MESSAGE I000 WITH TEXT-002.
STOP.
LEAVE LIST-PROCESSING.
ENDIF.
ELSE.
*--select statement for retrieving data from vbpa
SELECT VBELN
FROM VBPA
INTO TABLE I_VBELN
WHERE KUNNR IN S_KUNNR OR
KUNNR IN SO_KUNNR.
IF SY-SUBRC = 0.
SORT I_VBELN BY VBELN.
ELSE.
MESSAGE I000 WITH TEXT-002.
LEAVE LIST-PROCESSING.
ENDIF.
ENDIF.
ENDFORM. " get_vbeln
*& Form get_vbap
FORM GET_VBAP .
IF I_VBELN[] IS NOT INITIAL.
*--select statement for retrieving data from vbap
SELECT VBELN
POSNR
MATNR
KWMENG
KDMAT
FROM VBAP
INTO TABLE I_VBAP
FOR ALL ENTRIES IN I_VBELN
WHERE VBELN = I_VBELN-VBELN.
IF SY-SUBRC = 0.
SORT I_VBAP BY VBELN POSNR.
ELSE.
MESSAGE I000 WITH TEXT-002.
STOP.
LEAVE LIST-PROCESSING.
ENDIF.
ENDIF.
ENDFORM. " get_vbap
*& Form get_vbfa
text
--> p1 text
<-- p2 text
FORM GET_VBFA .
*--select statement to retrieve data from VBFA
IF I_VBAP[] IS NOT INITIAL.
SELECT VBELV
POSNV
VBELN
POSNN
FROM VBFA
INTO TABLE I_VBFA
FOR ALL ENTRIES IN I_VBAP
WHERE VBELV = I_VBAP-VBELN AND
POSNV = I_VBAP-POSNR AND
VBTYP_N = C_DTYPE.
IF SY-SUBRC = 0.
SORT I_VBFA ."BY vbelv posnv vbeln posnn.
ELSE.
MESSAGE I000 WITH TEXT-002.
STOP.
ENDIF.
ENDIF.
ENDFORM. " get_vbfa
*& Form get_likp
FORM GET_LIKP .
IF I_VBFA[] IS NOT INITIAL.
*--Fecthing data fron LIKP
SELECT VBELN
FROM LIKP
INTO TABLE I_LIKP
FOR ALL ENTRIES IN I_VBFA
WHERE VBELN = I_VBFA-VBELN.
IF SY-SUBRC = 0.
SORT I_LIKP BY VBELN.
ELSE.
MESSAGE I000 WITH TEXT-002.
STOP.
ENDIF.
ENDIF.
ENDFORM. " get_likp
*& Form get_lips
FORM GET_LIPS .
IF NOT I_LIKP[] IS INITIAL.
*--select statement for retrieving data from LIPS
SELECT VBELN
POSNR
MATNR
vgbel
LFIMG
FROM LIPS
INTO TABLE I_LIPS
FOR ALL ENTRIES IN I_LIKP
WHERE VBELN = I_LIKP-VBELN.
IF SY-SUBRC = 0.
SORT I_LIPS BY VBELN POSNR MATNR.
ELSE.
MESSAGE I000 WITH TEXT-002.
STOP.
ENDIF.
ENDIF.
ENDFORM. " get_lips
*& Form get_vbup
FORM GET_VBUP .
IF I_LIPS[] IS NOT INITIAL.
*--select statement for retrieving delivery status from VBUP.
SELECT VBELN
POSNR
LFSTA
WBSTA
FKSTA
FROM VBUP
INTO TABLE I_VBUP
FOR ALL ENTRIES IN I_LIPS
WHERE VBELN = I_LIPS-VBELN AND
POSNR = I_LIPS-POSNR.
IF SY-SUBRC = 0.
SORT I_VBUP BY VBELN POSNR.
ELSE.
MESSAGE I000 WITH TEXT-002.
STOP.
ENDIF.
ENDIF.
ENDFORM. " get_vbup
*& Form populate_final
FORM POPULATE_FINAL.
*--populating final internal table with sales and delivery data for
displaying purpose
LOOP AT I_LIPS.
I_FINAL-VBELN1 = I_LIPS-VBELN .
I_FINAL-POSNR1 = I_LIPS-POSNR .
I_FINAL-MATNR1 = I_LIPS-MATNR .
I_FINAL-LFIMG = I_LIPS-LFIMG.
READ TABLE I_VBFA WITH KEY VBELN = I_LIPS-VBELN
POSNN = I_LIPS-POSNR BINARY SEARCH.
IF SY-SUBRC = 0.
READ TABLE I_VBAP WITH KEY VBELN = I_VBFA-VBELV
POSNR = I_VBFA-POSNV BINARY SEARCH.
IF SY-SUBRC = 0.
I_FINAL-VBELN = I_VBAP-VBELN .
I_FINAL-POSNR = I_VBAP-POSNR .
I_FINAL-MATNR = I_VBAP-MATNR .
I_FINAL-KWMENG = I_VBAP-KWMENG.
I_FINAL-KDMAT = I_VBAP-KDMAT .
READ TABLE I_VBUP WITH KEY VBELN = I_LIPS-VBELN
POSNR = I_LIPS-POSNR BINARY SEARCH.
IF SY-SUBRC = 0.
IF I_VBUP-WBSTA = 'C'
AND I_VBUP-FKSTA <> ' '.
CONTINUE.
ENDIF.
IF I_VBUP-WBSTA = 'C' AND I_VBUP-FKSTA = ' '.
I_FINAL-DS = 'Shipped but not invoiced'.
ELSEIF I_VBUP-WBSTA <> 'C'.
I_FINAL-DS = 'open'.
ENDIF.
APPEND I_FINAL.
CLEAR I_FINAL.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " populate_final
*& Form call_alv
FORM CALL_ALV .
DATA: CPROG TYPE SY-CPROG.
CPROG = SY-CPROG.
*---populating fieldcatalog
PERFORM POPULATE_FIELDCATALOG.
*-----layout
PERFORM Z_LAYOUT.
*----for sub totals.
PERFORM Z_SORT USING LT_SORT.
*-----calling REUSE_ALV_LIST_DISPLAY
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = CPROG
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = I_FIELDCAT
IT_SORT = LT_SORT
TABLES
T_OUTTAB = I_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " call_alv
*& Form populate_fieldcatalog
FORM POPULATE_FIELDCATALOG .
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'VBELN'.
W_FIELDCAT-SELTEXT_L = 'Sales Order Number'.
W_FIELDCAT-TABNAME = 'I_FINAL'.
W_FIELDCAT-COL_POS = 1.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'POSNR'.
W_FIELDCAT-SELTEXT_L = 'Order Line Number'.
W_FIELDCAT-TABNAME = 'I_FINAL'.
W_FIELDCAT-COL_POS = 2.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'MATNR'.
W_FIELDCAT-SELTEXT_L = 'MAterial Number'.
W_FIELDCAT-TABNAME = 'I_FINAL'.
W_FIELDCAT-COL_POS = 3.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'KWMENG'.
W_FIELDCAT-SELTEXT_L = 'Qty Ordered'.
W_FIELDCAT-TABNAME = 'I_FINAL'.
W_FIELDCAT-COL_POS = 4.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'KDMAT'.
W_FIELDCAT-SELTEXT_L = 'Customer PO number'.
W_FIELDCAT-TABNAME = 'I_FINAL'.
W_FIELDCAT-COL_POS = 5.
W_FIELDCAT-OUTPUTLEN = 35.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'VBELN1'.
W_FIELDCAT-SELTEXT_L = 'Delivery Number'.
W_FIELDCAT-TABNAME = 'I_FINAL'.
W_FIELDCAT-COL_POS = 6.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'POSNR1'.
W_FIELDCAT-SELTEXT_L = 'Delivery Line Number'.
W_FIELDCAT-TABNAME = 'I_FINAL'.
W_FIELDCAT-COL_POS = 7.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'MATNR1'.
W_FIELDCAT-SELTEXT_L = 'Material Number'.
W_FIELDCAT-TABNAME = 'I_FINAL'.
W_FIELDCAT-COL_POS = 8.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'LFIMG'.
W_FIELDCAT-SELTEXT_L = 'Delivery Qty'.
W_FIELDCAT-TABNAME = 'I_FINAL'.
W_FIELDCAT-COL_POS = 9.
W_FIELDCAT-DO_SUM = 'X'.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'DS'.
W_FIELDCAT-SELTEXT_L = 'Delivery Status'.
W_FIELDCAT-TABNAME = 'I_FINAL'.
W_FIELDCAT-COL_POS = 10.
APPEND W_FIELDCAT TO I_FIELDCAT.
ENDFORM. " populate_fieldcatalog
*& Form Z_LAYOUT
FORM Z_LAYOUT .
I_LAYOUT-ZEBRA = 'X'.
I_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
I_LAYOUT-GET_SELINFOS = 'X'.
ENDFORM. " Z_LAYOUT
*& Form Z_SORT
FORM Z_SORT USING P_LT_SORT.
DATA :LS_SORT TYPE SLIS_SORTINFO_ALV.
CLEAR LS_SORT.
LS_SORT-SPOS = '9'.
LS_SORT-FIELDNAME = 'VBELN'.
LS_SORT-TABNAME = 'I_FINAL'.
LS_SORT-UP = 'X'.
LS_SORT-GROUP = 'UL'.
LS_SORT-SUBTOT = 'X'.
APPEND LS_SORT TO LT_SORT.
ENDFORM. " Z_SORT -
Need to get data for month entered in user prompt to prior 12months.
Hi,
I have a report where i need to display total amount for current month to prior 12 months data...first column will be current month, second column is (current month-1),3rd col: (current month-2)....( current month-12).
Is there any way I could use current date to get previous 12 months in variables?
For example: if current date is 02/15/2010, I need get data for 01/2010, 12/2009, 11/2009,....01/2009.
For example: if I entered Month: 03 and year:2010 in prompt , then I need to get data for prior 12 months to that in the prompt for month:03?.The only way to do this is using restrictions on Universe... here you can have the restrictions for every month or a range using the user prompt and the system date.
Regards -
Need to convert Date from calendar to String in the format dd-mom-yyyy
Need to convert Date from calendar to String in the format dd-mom-yyyy+..
This is absolutely necessary... any help plz..
Rgds
ArwinderLook up the SimpleDateFormat class: http://java.sun.com/j2se/1.4.2/docs/api/java/text/SimpleDateFormat.html
Arwinder wrote:
This is absolutely necessary... any help plz..For you maybe, not others. Please refrain from trying to urge others to answer your queries. They'll do it at their own pace ( if at all ).
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
(Yes I know it's on JavaRanch but I think it applies everywhere)
---------------------------------------------------------------- -
What cable do I need to transfer data direct from my iMac to my macbook pro
What cable do I need to tranfer data direct from my iMac to my MacBook pro?
Generally, Ethernet or FireWire.
(71181) -
I need to copy data from a table in one database (db1) to another table in
Hi
I need to copy data from a table in one database (db1) to another table in another database (db2).
I am not sure if the table exists in db2,,,if it doesnot it needs to be created as well data also needs to be inserted...
How am I supposed to this using sql statements..?
I shall be happy if it is explained SQL also...
Thanking in advanceHow many rows does the table contains? There are manyway you can achieve this.
1. export and import.
2. create a dblink between two databases and use create table as select, if structure doesnot exists in other database, if structure exists, use, insert into table select command.
example:
create a dblink in db2 database for db1 database.
create table table1 as select * from table1@db1 -- when there is no structure present
-- you need to add constraints manually, if any exists.
insert into table1 select * from table1@db1 -- when there is structure present.
If the table contains large volume of data, I would suggest you to use export and import.
Jaffar -
base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1i need to pass data from an Access database to Teststand by using the built in Data step types(open database /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1
When I tried the same thing on another cmputer the same thing
happend
appreiciate u"r helpbase /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1Hello Kitty -
Certainly it is unusual that you can still see the tables available in your MS Access database but cannot see the columns? I am assuming you are configuring an Open Statement step and are trying to use the ring-control to select columns from your table?
Can you tell me more about the changes you made to your file when you 'changed' it with MS Access? What version of Access are you using? What happens if you try and manually type in an 'Open Statement Dialog's SQL string such as...
"SELECT UUT_RESULT.TEST_SOCKET_INDEX, UUT_RESULT.UUT_STATUS, UUT_RESULT.START_DATE_TIME FROM UUT_RESULT"
Is it able to find the columns even if it can't display them? I am worried that maybe you are using a version of MS Access that is too new for the version of TestSt
and you are running. Has anything else changed aside from the file you are editing?
Regards,
-Elaine R.
National Instruments
http://www.ni.com/ask -
Need to read data from a text file
I need to read data from a text file and create my own hash table out of it. I'm not allowed to use the built in Java class, so how would I go implementing my own reading method and hash table class?
It's not possible to read from a file without using classes from the core API*. You'll have to get clarification from your instructor as to which classes are and are not allowed.
[http://java.sun.com/docs/books/tutorial/essential/io/]
*Unless you write a bunch of JNI code to replicate what the java.io classes are doing. -
Need to POST data from a desktop client to a server.
Hello all, it's been awhile since I've posted here, so I hope everyone has been doing well.
I have cross posted this here java - Need to POST data from a client application to my server - Stack Overflow but no answers, and since SO has been extremely slow for the questions I've been asking I am posting here.
Here is the post:
I know the title is probably a common question, but I am a bit confused on everything I'm trying to do, so I am trying to piece it together, and figured a common title would be better than a confusing one.
I am basically developing a web application and one part of that is a file uploader. I am using Apache Commons File Upload via the Streaming API, and that all works fine, except I need to access the file I'm uploading, because that contains data to additional files to upload. I.e., Read File A, get paths to images, upload images with File A to server and save on server. The API can be found here http://commons.apache.org/proper/commons-fileupload/streaming.html
I was told there is a security risk via the web and would be impossible via a browser, since the user needs to select all files to upload, i cannot tell the browser to upload additional files, so I am left with a client side option.
I am confused if there is a special library I need, or as I have been seeing threads that talk about using the built in UrlConnection Class or http://hc.apache.org/
I basically need to be able to read the file, which technically gives me a path to a Database on the user's system which I then read to get the additional images. After I get all of that I then need to post the data as a multipart form as that is what the FileUpload requires.
form method="POST" enctype="multipart/form-data" action="fup.cgi">
File to upload: <input type="file" name="upfile"><br/>
Notes about the file: <input type="text" name="note"><br/>
<br/>
<input type="submit" value="Press"> to upload the file!
</form>
This is the example found in the Overview section of the Fileupload which can be accessed from the link above.
There wouldn't be an issue if the users uploaded all of the data themselves, but since I have to do some of it automatically it causes some "concerns/issues."
Basically these files are created and packaged from another application, so the images, and the db will always be in the same place, and that file that they are uploading is a file the other program creates, so everything will always be known, I just need to upload it, and then POST it as enctype="multipart/form-data" So that my servlet can read it and save it on my server.
So I would appreciate it if anyone had any suggestions on where to begin my journey with this. I have heard of a few applications like curl and wget that are used for this, but those seem to be more C based. As mentioned earlier it seeems the httpcomponets from apache might work well, but I want to make sure.
I appreciate all the help, thank you for your time all.It's not possible to read from a file without using classes from the core API*. You'll have to get clarification from your instructor as to which classes are and are not allowed.
[http://java.sun.com/docs/books/tutorial/essential/io/]
*Unless you write a bunch of JNI code to replicate what the java.io classes are doing. -
Need to show data related to Process order request , BOM in a smart form
Hi,
I need to show data related to
Process order request
BoM
Now in selection screen we are entering the followings.
Manufacturing Plant ,MRP Controller, Production scheduler, Order type , Order , Material, Sales order, WBS Element,Release,Scheduled start, Scheduled finish ,Selection profile.
how to get 1> Process Order number,Produced Material,Material Description,Print date,Narcotics indicator , Quantity produced , Phase number , Phase description ,Resource description,Standard value to show in a request form.
2> Item category ,Component code,Component description , Component quantity ,Component Unit of measure ,BoM base quantity.
Please help me how to get those values , what should be the aaproach , how to write the select quiry.
ThanksHi
To get BOM details, do the following:
1. Use the material number and goto Article to BOM link table (MAST) to get STLNR (BOM).
2. With this STLNR, goto STPO table (where STLNR is the key field). Here you will get all the BOM details like components (IDNRK), UoM (MEINS) etc....
Hope this helps.
THanks
Vijay
<b>PLZ REWARD POINTS IF HELPFUL</b> -
I have an old Mac Tower. I need to move data from the unit to an external hard drive. What kind of of hard drive must I purchase so that it works with the Tower? There is not a lot to transfer.
MG,
What we might need to do is to change the question. What computer do you plan to use the data on in the future? For example, if you have a newer tower, just move the hard drive to the new tower. If you want to use the data, what about an ethernet LAN to get the data over? If you want to archive the data, how do you store the second drive? What are your plans for the first drive? If the new software will not recognize the old file type, the data must be exported. Just getting files to another hard drive will not finish your journey.
As Allan said, knowing the exact model and year of your tower is important. My suggestion is to find a user group near you. Please post back with more information, including the name of a large city near you.
For example, our user group just experimented with a 1983 Apple IIc that predates the Mac. It started right up, read files from 1984 and saved them from a 5.25" floppy to a 3.5" floppy. That 3.5 floppy will go into a platinum G3 which will read PRODOS files using Apple File Exchange. That G3, with a USB card, will allow saving the files to a USB flash drive. But, somewhere along the way, some software has to read the file and convert it to data that is useable by current software.
Ji~m -
My external hard drive is read only, need to transfer data off it, reformat the drive then copy back
my data from my pc is on a hard drive, 1tb formatted windows ntfs. So I need to copy data, reformat hard drive to mac format, then reload it.
is that correct? any tips if so? only 270 gig is data, about 730 is empty
internal hard drive has about 950 gig free.Correct.
Maybe you are looking for
-
Is there a setting to tell my iphone i5s icloud to back up using my data plan, since I have no wi-fii or enternet service? Also same phone, does it have a personnel hotspot option?
-
How do I set up two profiles on my computer but still utilize all programs and files?
How do I set up two profiles on my computer but still utilize all programs and files? I want to set up two profiles so my wife and I can utilize two iTunes accounts and different internet settings, but when I set up an administrator profile for her
-
XI to RFC Scenario: Runtime error during RFC Call
Hi, I am testing a XI-to-RFC scenario involving BPM. The RFC works perfectly from SE37; but I get 'ICM_HTTP_TIMEOUT, Error code 402' when I invoke it from XI. On digging through the problem, it appeared that the calling program produced a short dump
-
Is it possible to open multiple files in their own workspace, rather than as tabs or floating?
You could do this in CS5, but it doesn't seem possible in CS6. It's a bit clunky when dragging from one file to another in the tab mode. I liked having the workspaces open side by side. Help?
-
Error : Oracle BPEL Process Manager Full Cycle
{color:#3366ff}Hi, I tried to deploy the UnitedLoan sample demo on to the BPEL server, I ran devprompt.sh to set the environment path and changed the oc4jadmin password in properties file, and when I tried to open the BPEL console I am getting the fo