Need to show data related to Process order request , BOM in a smart form

Hi,
I need to show data related to
•     Process order request
•     BoM
Now in selection screen we are entering the followings.
Manufacturing  Plant ,MRP Controller, Production scheduler, Order type , Order , Material, Sales order, WBS Element,Release,Scheduled start, Scheduled finish ,Selection profile.
how to get 1> Process Order number,Produced Material,Material Description,Print date,Narcotics indicator , Quantity produced , Phase number , Phase description ,Resource description,Standard value  to show in a request form.
  2> Item category ,Component code,Component description , Component quantity ,Component Unit of measure ,BoM base quantity.
Please help me how to get those values , what should be the aaproach , how to write the select quiry.
Thanks

Hi
To get BOM details, do the following:
1. Use the material number and goto Article to BOM link table (MAST) to get STLNR (BOM).
2. With this STLNR, goto STPO table (where STLNR is the key field).  Here you will get all the BOM details like components (IDNRK), UoM (MEINS) etc....
Hope this helps.
THanks
Vijay
<b>PLZ REWARD POINTS IF HELPFUL</b>

Similar Messages

  • Why reservation don't show decimal same as process order?

    When i create process order 001 its require Mat.A 0.95 ZET, the problem is when see reservation at MB26 its whow order 001 require 1 ZET, Why it's don't show 0.95 as process order require?
    Information: Base unit of Mat.A = SET, Unit of issue of Mat.A = ZET, alternative unit is 1 ZET = 1 SET.
    In T-code CUNI, decimal places rounding of unit SET = blank, decimal places rounding of unit ZET = 4.
    we wouldn't like to set decimal places rounding of unit SET = 4 because, they think its will impact to other material which use unit SET. for this reason we create new unit name "ZET"
    Can any senior has solution to make reservation to show decimal when BOM use unit ZET.
    or not have the way and back to set Mat.A to user unit SET in BOM and set decimal places rounding of unit SET = 4. but this way they concern about risk.

    Dear,
    Please try with the customizing settings in t.code " CUNI " ---> Units of Measurement
    1.) Take your Units of measure, go to details Screen
    2.)There u can see the entry Box with " Decimal Places". Type in u'r option and save.
    This might solve u'r Query.
    Regards,
    R.Brahmankar

  • Using bsid and bsad I needed get partner name related to sales order

    Hi
    Using bsid and bsad I needed get partner name related to sales order
    I have gone through the tables but its vbeln column is blank
    How can I make relation between bsid and bsad with vbak if vbeln and column is blank in the table bsid and bsad.
    Please guide me.
    Regards
    Sebastian
    Edited by: Sebastian John on Apr 21, 2009 3:35 PM

    BSID-VBELN = VBRK-VBELN.
    Billing document number is there in BSID table.
    Regs.

  • Error for open process order when BOM alternative is not found

    Dear colleagues,
    When I open process order. BOM alternative is selected according to the production version. But when  BOM alternative is not found system gives only information message and I can open process order, I want to prevent open process order when there is no BOM alternative according to the production version. Because the Bom can be deleted after creation production version.
    Thanks for your helping,

    Hi,
    U need to use an enhancement at the creation of order to check the active status of the bom and restricting the order creation when BOM status is inactive.
    see whether following enhancement is useful for your scenario:
    PPCO0006 Enhancement & EXIT_SAPLCOZF_003
    Please confirm.
    Regards
    Suri

  • Process Order without BOM

    I want to create a Process Order without a BOM & Recipe . Is that Possible ?
    I tried the following :
    Material Master setting  MRP 4 view -Explosion/Dependent Requirements section define " "(Blank) for Selection Method field
    Order Type Dependent parameters (COR4)
    Production Version Blank :
    Recipe: Do not use Master Recipe
    But the problem is that I cannot keep BOM application Blank
    BOM application has the link for selection ID which is linked to BOM usage .
    I am not able to bypass this check in any way & as a result it gives an error (No valid BOM) on Process order creation
    Shall appreciate a response

    Hi,
    Yes, it is possible to create process order without BOM & master recipe.
    By having some config settings in place for BOM & recipe selection, you can create process order without BOM & recipe in SAP.
    Normally, this scenario comes into picture where you're not sure about the operations to be carried out and materials to be consumed for an order.
    For creating and testing such scenario, refer below SCN thread, which was discussed before,
    Create Process order without Production Version | SCN
    Regards,
    Narresh

  • Finish Date Calculation in Process Order

    Hi all,
    I have an unique problem. I am using Backword schduling and while creating a Process Order I give a Finish Date and Create the Order. But while Saving System Overwrites with a different finish Date. I have ckecked, nowhere In house Production Time is maintained in Material master for the Material. My question is from where the system is picking this new finsih Date?
    Please give me the clue..
    Regads

    Hi,
    Please check the scheduling Type when you ran MRP.
    If you had used basic scheduling, then the times are picked-up from the material master. But you used Lead Time scheduling, then the times are picked from the routing.
    Also, check the floats maintained in the material master.
    Hope it resolves the issue.
    Regards,
    Kaushik

  • Apportionment Structure -In Control Data Tab of Process Order

    Dear Gurus
    How we can enable Apportionment Structure in Control Tab of Process order. In the drop down menu list i can see the Material / Plant / Appont str in the field of Apportionment Struct ( But it is disabled ) .
    Thanks & Regards
    Anupama

    Hi
    If you have co product then it will get enabled.
    Thanks
    S.Murali

  • BOM component Qty is getting rounded to next value in Process Order and BOM

    We are in ECC 6.0, and maintaining BOM where Item quantities are decimal places e.g 0.3lb with respect to Hader qty. Now when we are craeting process order or exploding in CS11, we are seein that item quantities are getting rounded to next full integer e.g 1, 2 or 3.
    What could be the reason for this behaviour.

    In standard  "lb' doesn't have decimal point
    If you want decimal point
    go to CUNI
    select the mass
    you can find the lb
    maintain the decimal point  as 3, & decimal point rounding as as 3, system will show 3 decimal point in process order and in CS11

  • Need to show date & a counter in my video - HELP!

    I need the date and a counter to show (superimposed?) over the video in my iMovie/iDVD. I know the date and time recorded was imported with the video files from my DV camcorder because they are available in File Info. The video recorded was a court deposition for a lawyer, and they will want the date recorded to show on the video. I'm also guessing they'll want a counter for easy access to certain parts of the video if needed. How can I do this? Is it done in iMovie or iDVD, or can it be done in both? Thanks!

    Hi Shannon:
    I answered you in the other discussion group you posted this question to:
    http://discussions.apple.com/thread.jspa?threadID=277756&tstart=0
    Please don't post in more than one forum at a time..;) Thanks!
    Sue

  • Want to show data from current month & prev month in single record on forms?

    Hello experts,
    i have this requirement:
    Table structure:
    MOnth       Division         totalAmount
    01-apr-2013      1               10000
    01-May-2013    1               20000
    01-apr-2013      2               30000
    01-May-2013    2               50000
    i want to display in forms like
    Form:
    Month  : 01-May-2013
    Month               Division               total               prev_Month          division               total                         dIFFERENCE
    01-May-2013               1              10000                01-Apr-2013               1               20000                        10000
    01-May-2013               2              30000                01-Apr-2013               2               50000                        20000
    I am using two procedure for fetching records for current month and previous month.
    but it will cause problem, if for some division previous month data not present.
    please suggest me some query with which i can fetch current and pre month data in single record.
    Please help me out.
    Thanks
    yash

    I'M NOT SURE BUT TRY IT ............
    select x.mn mnth, x.division, x.totalAmount total, y.mn prev_month,  y.division, y.totalAmount total, (y.totalAmount - nvl(y.totalAmount,0)) difference
    from
      (select month mn, division, totalAmount
      from table_name
      where month = (select max(month)
      from table_name
      ) x,
      (select month mn, division, totalAmount
      from table_name
      where month = (select add_months(max(month),-1)
      from table_name
      ) y
    where x.division = y.division(+)
    MOSTAFIZ MITUL
    DHAKA BANGLADESH

  • Need  to show three diff sheets in a smart form , first to be printed twice

    Hi
    I need to show data in a smart form where I have 3 different sheets
    •     Process order request
    •     BoM
    •     Assembly
    where the first sheet will be printed twice .
    as header in each case we have order no , produced material order qty , qty produced etc with the title changing for each sheet . main window we have diff data depending on each form like it will b changing for process order req, bom , assembly .
    how to do that & I need to print each layout in 2 diff language.
    plz help.
    useful answers will be rewarded.
    Thanks

    Create three pages . The first and the last are static and the second variable.
    The first page repeat with a loop twice. The headers of the second pages and next has a window static (the header) and other variable .
    If you have two languages repeat the operation. Call the smartform with a parameter called language by example

  • Configuration for Process order for Forms

    Hi,
    I want to develop a layout for Process Order.
    Where we will do configure Print Program & Layout for Process Order like
    what we do in NACE for SD&MM related layouts!
    Will this Process Order supports both SAP Script & SMART Forms!
    Can anybody clarify!
    Thanks,
    Deep.

    Hi ,
         In Process order transaction ,in output options declare the form name and output type. In TNAPR table in SE11 create on row with the above o/p type and form name. I think  both forms will be possible.
    Actually where ever script form possible means there you can create smartform also.
    Thanks.
    Suma.

  • Scheduled finish date for process orders not updating in BW

    We are having problems with the scheduled finish date (GLTRS) for process orders. When the process order is already released, changes done in R/3 on the scheduled finish date will not result to a delta hence data in BW is not updated. Table AFKO, where data is coming from, is always updated with the changes though. 2LIS_04_P_MATNR is used in extracting the data.
    Has anyone experienced the same problem? We are looking for possible ways on how to have a delta whenever there are changes on the process order even after it is already released.
    Any help would be greatly appreciated...

    Hi Donna,
    If I've understood your problem correctly, you can increase the load frequency as Sriee has pointed out.
    If you want latest data frequently and if you are on BI 7.0 then you can look at Real Time Data Acquisition(RDA)
    Regards,
    Tom.

  • Need a BAPI/FM for process Order Confirmation

    Hi guys,
    I need a bapi or Fm for process Order confirmation.
    thnx in advance

    Checck
    BAPI_PRODORDCONF_CREATE_ACT
    BAPI_PRODORDCONF_CREATE_HDR
    BAPI_PRODORDCONF_CREATE_TE
    BAPI_PRODORDCONF_CREATE_TT
    Better read the documentation of each BAPi using the tcode BAPI and proceed.
    I feel BAPI_PRODORDCONF_CREATE_HDR would do your purpose.
    Documentaion:
    <b>
    You can use this method to enter order confirmations for production orders.
    You can also transfer good movements, that are posted together with a confirmation. If no goods movements have been entered for a confirmation, they are determined using the standard logic for backflushing and automatic goods receipt for confirmations. </b>

  • Info Related to Material No, Process Order No

    Hi Gurus,
    Can you tell the Master and auxillary tables related to Process Order No, Material No and Plant.
    I have to run t-code : COPI
    which is used to generate Feedback list ( Process Order )
    I have Process Order no with me but do not have material no and plant...From which table can i obtain the same..
    Thanx,
    Navin..

    Hi,
         You can try the tables AUFK, AFPO, LTAK, LTBK.
    <REMOVED BY MODERATOR>
    Edited by: Alvaro Tejada Galindo on Jun 12, 2008 4:17 PM

Maybe you are looking for

  • ITunes' C drive access 'times out' / Recreating iTunes on a new drive

    I'm not sure exactly what to search for, so if this situation has been discussed before, I'd be grateful if someone can point me in the right direction. But I'm thinking my situation may be a unique one. My circumstances are that I'm running a six- (

  • Cross company code error in posting due to retro

    Hi, We have a scenario where a backdated change was made to move an employee accross company codes. During payroll posting into finance, we recieve the following error: Required field GL_ACCOUNT was not transferred in parameter ACCOUNTGL This is in 2

  • Changing area of pixelation on screen - why?

    OK, pixelation may not be the right term. But anyway, there are changing places on the screen where there's a chunk that is like an extremely low resolution, etc.  I'm attaching a partial screenshot so you can see what I mean. When I scroll or move,

  • Firewire reader

    Lightroom can't import from firewire card reader. PS,Nikon Capture, RSP have no problems with the reader. Windows Vista AMD 6000+ 3GHZ 2gb DDR2

  • Turn off SSL site on OS X Server

    I am running OS X Server 10.8 and am trying to use my SSL port (443) for a server that. Sadly everytime I run my server I get a resounding error saying that the port is in use. I have turned off my server websites because of this but I noticed that a