Need schema files for tutorial in getting started with soasuite11gR1

Hi
I just started working on Getting started with Oracle SOA suite11gR1 book.
I dont have schema files required for tutorial.
Can an provide me the schema files.
creditchecck.xsd
fulfillment.xsd
internalorder.xsd
OrderBookingDiscount.xsd
po.xsd

This link: http://download.oracle.com/technology/products/soa/soasuite/books/SOA11g_GettingStarted.zip contains the good files
Edited by: 851325 on 11 avr. 2011 05:04

Similar Messages

Is this the right place for me to get started with pdf development?

Hi, What I am going to do is to write some AS3 classes which will load a pdf file and can extract its data like taking BitmapData shots from all the pages and that stuff...
so, will you be able to let me know if I'd be able to ask tech questions in this forum along the way? and also, will you be able to tell me where to start to get some helpful information about pdf files so that I can access and read them in binary level?
any comment is appriciated,
Hadi

thanks for the reply, I just downloaded that reference book and will start reading it in a few minutes... I wonder if I'd also need to purchase the pdf library thing later? http://www.adobe.com/devnet/pdf/library/
or accesing the pdf in AS3 in binary level will solve my problem of taking bitmapData screenshots from pages?
Regards,
Hadi

Tutorial sample "Getting Started with JavaTM IDL"

Everything compiles. nameserver starts up and so does HelloServer however, when I start up HelloClient I get this
ERROR : org.omg.CosNaming.NamingContextPackage.NotFound
org.omg.CosNaming.NamingContextPackage.NotFound
at org.omg.CosNaming.NamingContextPackage.NotFoundHelper.read(NotFoundHelper.java:34)
at org.omg.CosNaming.NamingContextPackage.NotFoundHelper.extract(NotFoundHelper.java:50)
at org.omg.CosNaming._NamingContextStub.resolve(_NamingContextStub.java:161)
at HelloClient.main(HelloClient.java:23)
Any suggestions?
Im running JDK 1.3 on Win2000.

hi,
it looks like you don't have helper.java files..when you compiles idl file , what command did you use?..it is
idlj -fall file.idl..

Getting started with an iBook G3?

Hey,
I just got an iBook G3 (500mhz, snow, airport, 10gb hd, upgraded ram), to compliment my iMac (G5 rev c) and I'm a little new.
It was used, I got it via trade.
Does anyone have some tips for me to get started with it ? I'm wanting to upgrade the HD to at least 20 GB, and to max out the ram. Any hints on that ?
Also, where can I get a new battery and charger ?
Also, what else should I know about it ?
It will mainly be used for writing (novel, fan-fics), surfing the web (wirelessly), and when I'm traveling...
Oh, it has OSX10.2 installed.

Hi, Josh. Welcome to Apple Discussions.
How much RAM is installed?
Does it have the original AirPort card installed? (You may want to install one, if not, to enable wireless access to the internet.)
Did the original system CD's and the OS X 10.2 software CD's come with it? If not, try to get the person you got it from to give them to you. You will need them if you intend to upgrade the hard drive (and for maintenance, even if you don't upgrade the hard drive).
Hard drive upgrade services:
MCE Technologies
DT & T Computer Services
A hard drive upgrade is very complicated, and best left to a professional.
Check out the procedure:
http://www.pbfixit.com/Guide/50.12.0.html
http://www.powerbooktech.com/knowledge,name-Hard-Drive,type-6.htm
http://uk.geocities.com/ibookupgrade/
http://sterpin.net/uk/ddibookdualuk.htm
Hard Drives:
Other World Computing
Newegg
Batteries:
http://www.powergears.com/product.php?catID=1100&p=1
http://www.computergiants.com/items/one_item.asp?part=71148&cat=99&subsubcat=115 2
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M93 37G/A
http://eshop.macsales.com/item/Newer%20Technology/BAPIB111V36/
http://eshop.macsales.com/item/Newer%20Technology/BAPIB111V48/
Adapters:
I have found the following options for replacing a white iBook power adapter:
http://www.macresq.com/store/detail.php?prodID=P009141
MCE Technologies
http://www.madsonline.com/index.html?
adapter at Other World Computing
Apple's is the only one with the glowing ring, though, and is found here:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M89 43LL/A
Enough dual USB G3 iBooks suffered from a logic board problem that Apple began the iBook Logic Board Repair Extension Program in January of 2004. Check out the FAQ page and be aware of how this logic board problem manifests itself.
It has been suggested that you can minimize the chance of a logic board failure of this sort by never picking it up by the front left corner alone. Pick it up with both hands or in the center under the trackpad.
It's also a good idea not to close it any more often than you need to in order to minimize the chance of the backlight cable (and other cables and wires) becoming pinched in the hinge or broken. When you have some time, check out the Discussion thread in the Displays Forum entitled 90 degrees and black out!!!!
Information on using the battery to maximize both life and lifespan can be found here.
You can download the manual for the iBook (Dual USB) from this page:
http://www.apple.com/support/manuals/ibook/
Good luck, and happy iBooking!

Help Needed with getting Started With Office 365 Development C# Rest API

We have a O365 Tenant Setup with a Federated Active Directory Setip we want to be able to right code that will connect to our tenant and perform basic CRUD operations against it (ex. Creating mail boxes)
The problem is we want this to be contained in a CLR trigger In SQL so say if a new user is added to our user table then we would create a new AD account for that user and also create a mailbox.
But I cannot find and example on how to connect to Office 365 using the REST API (Not the SDK because you can not add the connected service to a class library) and before the required actions that we need to do. All the example I have found are with the
SDK API and/or require window 8 and that is also not an option.
Please help I do not know where to start, and I would love to see some examples done in c# and not using the SDK.
Thanks,
Andrew Day

Hi,
>> Instead of SharePoint URLs I would use the O365 API URL?
Yes, in my sample code, I was accessing the File resource by using the O365 File API. In your case, you need to acquire the token to access the Mail resource and use O365 Mail API.
By the way, I think the article
Understand Office 365 app authentication concepts will help you to understand the authentication process in Office 365 Development.
>> Why can I not use the SDK API with a class Library?
Actually, you are able to reference the Office 365 .NET SDK in the class Library. But the class library project type was not supported by Visual Studio Office 365 Development Tool. As a workaround,
you can reference the SDK manually in your project.
Since your original question is about “getting started with Office 365 Development C# Rest API”, if you have more questions about the Office 365 SDK, I will suggest you posting a new thread
to discuss the Office 365 SDK. It will involve more other community members to share their ideas and experience on a specific a question and for others who had a similar question could also find the valuable information quickly.
Regards,
Jeffrey
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What do I need to know to get started with Windows 10?

QuestionWhat do I need to know to get started with Windows 10?
AnswerWindows 10 likely looks familiar in some ways to past Windows users whether they're most familiar with Windows 8, Windows 7, or earlier versions of Windows.
To read about what's new with Windows 10, check the sections below. To learn about Windows 10 and see it in action, you can watch this video:
Desktop and Start menu
When you start your Windows 10 computer, you'll see the desktop. Like in Windows 7 and earlier versions of Windows, you'll see the Start button in the lower-left, which opens the Start menu.
The new Start menu combines aspects of Windows 7's Start menu with Windows 8's Start screen. On the left are important links, including Settings, as well as applications you use often. On the right are Modern UI app tiles. The Start menu also contains a button for power as well as a button to expand the Start menu to a full screen view.
Cortana
Next to the Start button is the Cortana search field. Cortana is a personal assistant that can help you find answers, solve issues, and search for files. You can click in the box to typer to her, click the microphone to speak to her, or press the Cortana button on select Toshiba laptops to speak to her.
You can learn more about Cortana here:
How do I use Cortana in Windows 10?
Action Center
The Action Center can be used to view notifications and access settings quickly. Hold the Windows key and press the 'A' key to open the Action Center.
Notifications are shown at the top, and toggles for various settings are located at the bottom.
On touchscreen devices, you can swipe in from the right to open the Action Center. The toggles on the bottom are sized so that you can press them with your thumb easily.

Install 7. Don't bother with applying drivers and such, just reboot again from DVD and install again, it will see the existing system and this time activation will be possible.
Vista is mess, takes longer etc. Hope you have SP1 version of 7. And for Vista, only SP2+ are even supported now, by MS.

Getting Started with Podcasting - need some direction/help

hi,
I need some information on how to get started Podcasting. Any good online resources, software, etc.
I have looked at garageband3 on my iMac and it seems to be quite good, but what else is out there and does anyone have any tips or suggestions on getting started?
Thanks in advance!!
BCA

I still have GB 2 so I don't know about GB's podcasting abilities (though some of the questions I see here suggest it's not all that wonderful).
I use, and would recommend, Podcast Maker:
http://www.potionfactory.com/podcastmaker/
which is $29.95 and is available on a 30 day free trial.
You make your podcast using GB or whatever program you want, and save it as an MP3 file. You then open it in Podcast Maker and add the summary and description fields, and if you want it to be an enhanced podcast you add chapters and the artwork. It will then upload it to your iDisk or the server of your choice, create the XML file, and ping the Apple Store if required. All this is seamless and easy to use.

Get started with file and font sync

Get started with file and font sync how do you access the 700 free fonts?

Have you requested and received an email that you're eligible for File and Font Sync early access?
If you have, go to creative.adobe.com and download the latest version Creative Cloud desktop after you log in with your Adobe ID.
Then when installed, you should be able to click on Fonts to browse on the Typekit website.

Getting Started with FCE - Problems with my imported files

Hi,
I'm trying to get started with Final Cut Express, but I'm experiencing lots of problems when I import my project from iMovie.
My project contains video, which I imported into iMovie at 960 x 540. It also contains some keynote animations, which I exported from Keynote as quicktime files.
When I export my files to FCE, I instantly get problems.
1) When I add the imported file to the sequence, I get an "Attention the clip does not match the sequence's setting or any of your sequence settings" error.
2) Whether I choose to translate my settings or not, I try to play the video in the timeline, but there is a continuous beeping sound, no audio from my video and when it hits the keynote animations, it just says "unrendered" or "media offline".
Please can you offer any advice on how I can get started with FCE more successfully.
Thanks!

Hi(Bonjour)!
(please specify iMovie and FCE version)
Well, your sequence settings in FCE should be DV-PAL 48 Khz.
Create a new sequence.
From iMovie and Keynote, export your movie with quicktime conversion andd select DV-PAL 48 kHz (*And Not* DV Stream...). This material should play without rendering because his format and codec match the sequence's codec.
Import your files and everything should be OK.
Michel Boissonneault
The audio should be AIFF 48 kHz 16 bit linear PCM

Tried opening a file in library and it states can't open database with library name? It says Relaunch then will not open? and Blocks me completely from Aperture. I have to go to Finder to Rename it? I need this file how do I get it to open?

Tried opening a file in library and it states can't open database with library name? It says Relaunch then will not open? and Blocks me completely from Aperture. I have to go to Finder to Rename it? I need this file how do I get it to open?

Aftershotz,
You're going to have to give a bit more information.
What do you mean by "opening a file in library?" There is no function of Aperture to open files -- you can open (switch) libraries.
You'll have to be more specific about error messages, too. Perhaps some screenshots would be useful to diagnose your problem. "Can't open database with library name" is not enough detail about what Aperture is really telling you.
nathan

"Tutorial - Getting Started with JSF" does not work

I tried the "Tutorial - Getting Started with JSF" located on http://www.oracle.com/technology/obe/obe1013jdev/jsfintro/jsfintro.htm#t6, but the last part "Creating a conditional navigation" is not complete.
There are 2 issues
1. The return values in the code blocks in step 9 and 11 do not match with the given example code.
2. In step 12 I am missing the way to bind this message component to returned message from the login.
Could you please correct the code parts and add the message binding piece?
Thanks,
Aard Jan

I tried the "Tutorial - Getting Started with JSF" located on http://www.oracle.com/technology/obe/obe1013jdev/jsfintro/jsfintro.htm#t6, but the last part "Creating a conditional navigation" is not complete.
There are 2 issues
1. The return values in the code blocks in step 9 and 11 do not match with the given example code.
2. In step 12 I am missing the way to bind this message component to returned message from the login.
Could you please correct the code parts and add the message binding piece?
Thanks,
Aard Jan

I need a file for EPLAN P8 Version 2.4

My problem is that I need a file for EPLAn P8 about NI USB-6501.

HI,
there are just a few documents for dimensional drawings like that:
http://digital.ni.com/hardref.nsf/websearch/bead78e923f9670286257475006ecb9a
Are you looking for this?
Best Regards, Fabian

I need rpl file for my n70 plz nokia

i need rpl file for my n70 plz nokia
model n70
Moderator's note: The post was edited. IMEI was removed. Please avoid posting any of your personal information on public forums like this.

novasewline wrote:
wheres my answer... i need help now!
And where is your question, explained in detail?

Adobe Illustrator Help: tips for how to get started?

I am new to adobe products. Does anyone have any tips for someone new who is just starting out
with adobe illustrator? I have not used it before. Any beginner tips on how to get started with adobe
illustrator would be appreciated. Thanks

start by reading the documentation and follow the samples shown, get familiar with the user interface, get to know where the tools are and what they do...and the most important thing practice, practice, practice.
other than that, there are plenty of resources online, depending on your learning style, buy a book, follow tutorials, watch videos, take a class.

I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

Labview isn't cheap, but it would certainly allow you to build a program (set of vi's - virtual instruments) that would do what you describe. Where would the timecode information come from? Your vi, or program, would: Start up, initialize the serial port, loop until a trigger happened, read the timecode (from where?), output that timecode out the serial port in a loop until you pressed the stop button. There is a free evaluation of Labview software available from NI - the base product itself runs about $995.
- Dave

Need schema files for tutorial in getting started with soasuite11gR1

Similar Messages

Maybe you are looking for