Need some help asap! Please

I'm typing up a long paper, and I have a outline that I made in outline form.
ie -
I.
A. xxxxx
B. xxxxxxx
Now what I want to do is go under each line in my outline and make remarks. What I want to do is start my comment where the first letter of the outline is (for instance, under the first "x" of letter A.)
What I'm doing is going to the inspector and change the option under "follow paragraph style" to "free form", then I hit enter, tab over, and it works. But every time I to go the time line it goes back to "original" and I have to change it back to "free form"
Is there a way to keep it on "Free form" so I can just in my outline? is there any eaiser way to do what I'm trying to do? I really need to get this done tonight.
thanks!

You need to redefine your list style.
What you are going to do is the 3rd level will be indented but have no number.
Create a sample of the list text with only the 3 levels
Select the 3rd level text and go:
+Inspector > Text > List > Bullets & Numbering > No Bullets+
This will be indented too far in.
With the 3rd level still selected:
+Inspector > Text > List > Bullets & Numbering > Text Indent: 0.2 cm (in my case)+
till it aligns with above.
Now select the whole range of the 3 level list:
+Menu > View > Show Styles Drawer > List Styles > click on tiny triangle > Create New List Style from Selection… > Give name > OK+
Use that as your list style from now on.
Peter

Similar Messages

Can't boot Lenovo Yoga 10+ HD, need some help ASAP!

Hi guys,
I am a bit clueless here. I just purchased the Yoga 10+ HD tablet and all was fine. Today I realised that my power button is constantly blinking (every 3 seconds). I cant boot the tablet the usual way by pressing the button. Clicking on it for more than 10 seconds won't change anything eiter. What is this and how can I get my tablet back to work?
PS: If I connect my tablet to my PC I get more than 12+ harddrives which can't be accessed and differ between 550kb up to 12gb.
I seriously need some help. I think its somehow in sleep mode or so. I don't know how to fix this.
thx for any solution.
Solved!
Go to Solution.

Ok guys, got it. All fine. HAd to push button more than 30 secs. All fine now.

Array to grid works but need some help. Please help the beginner...

Hi,
I'm very green at this...
I've been trying to display a two-dimmensional array on a dataGrid and finally found some code that I was able to modify to my needs.
However couple things I don't understand.
1. Do I need the <s:itemRenderer>...</s:itemRenderer> section to display the data? Can this be simplified?
   I don't need to change the default look of the columns etc. However it looks like the grid will not populate without that prepare() function.
   Why isn't this sufficient to populate the grid? -> dataGrid.dataProvider = new ArrayCollection(dataArray);
2. The number of columns is hardcoded (3) and their headings are as well (N1, N2, N3).
   Can I show/hide columns at runtime based on number of columns in my array?
   Can I rename the column's headings at runtime?
Thanks,
Tom
here's the code:
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:mx="library://ns.adobe.com/flex/mx"
xmlns:s="library://ns.adobe.com/flex/spark" title="HomeView">
    <fx:Script>
        <![CDATA[
            import mx.collections.ArrayCollection;
            import spark.components.gridClasses.CellPosition;
            import spark.components.gridClasses.CellRegion;
            // Create a dataProvider whose items are arrays of 6 random numbers.
            // The DataGrid's item renderer will display item[columnIndex].
            private function initializeDataProvider():void
                const nRows:int = 10;
                const nCols:int = 3;
                const dataArray:Array = new Array(nRows);
                for (var row:int = 0; row < dataArray.length; row++)
                    var values:Array = new Array(nCols);
                    for (var col:int = 0; col < values.length; col++)
                        values[col] = Math.round(Math.random() * 10);
                    dataArray[row] = values;
                dataGrid.dataProvider = new ArrayCollection(dataArray);
        ]]>
    </fx:Script>
    <s:DataGrid id="dataGrid" selectionMode="singleRow" initialize="initializeDataProvider()">
        <s:itemRenderer>
            <fx:Component>
                <s:DefaultGridItemRenderer>
                    <fx:Script>
                        <![CDATA[
                               override public function prepare(hasBeenRecycled:Boolean):void
                               label = data[columnIndex];
                        ]]>
                    </fx:Script>
                </s:DefaultGridItemRenderer>
            </fx:Component>
        </s:itemRenderer>
        <s:columns>
            <s:ArrayList>
                <s:GridColumn headerText="N1" width="50"/>
                <s:GridColumn headerText="N2" width="50"/>
                <s:GridColumn headerText="N3" width="50"/>
            </s:ArrayList>
        </s:columns>
    </s:DataGrid>
    <s:Button id="cmd" x="128" y="502" width="122" label="Button" click="initializeDataProvider()"/>
</s:View>

Hi fouriron,
Does this help?
Formula in E2 (and Fill Down)
=IF(D2<10,10, D2)
If a value in column D is less than 10, then insert 10, else insert the value from column D
The "correct" value (SUM) is in column D
The "required" Answer is in column E
Regards,
Ian.

Need some help quickly, please!

I'm not exactly sure where to post the following, so I'm sorry if it's in the wrong place!
So I helped my sister order an iBook and an iPod nano thinking the nano qualified for the Free iPod promotion. Anyways, it's not qualified so I want to cancel it.
So here's where I'm unsure about some stuff:
After I realized it wasn't part of the promotion, I went to my order status (my sister's actually, I made her an account) to try to cancel the nano. There was no button to review or change it.
I noticed the status of the iBook said 'shipped' and the nano was 'processing order'. I'm guessing there was no change/review button because the iBook was shipped already? The Apple Customer Service closed and the order status on the nano changed to 'preparing shipment'.
Ok, so, I'm gonna need to call Apple Customer Service in the morning and would like to know:
What are my chances of being able to cancel it? By the way, the nano needs to be custom engraved so I'm hoping I can get it canceled before it does. Also, do you think I will be able to change the nano to the mini and still qualify for the promotion?
Oh, one more thing: I am calling on behalf of my sister, so am I still able to cancel it for her? I do have all of the neccessary information.
Any replies would help! the anxiety is getting to me!

I ordered an iBook with extra 20Gb and an engraved iPod on 4th September. From the second after I ordered it until it was "shipped" the tracking system said it was "processing order". It was "shipped" 4 days later on 8th September. There was no in between such as "sent to manufacturing" or anything like that and believe me I was checking every hour of every day almost!! The tracking showed that my iBook was ready before my iPod and was shipped on its own to Europe without the iPod. The iPod significantly held the order up (I'm assuming it was cos it was engraved) so chances are you can still cancel it. Only thing is, even if you can cancel it, you may not qualify for the £100 rebate unless you can get them to actually change it to an iPod mini as you have to have them both appear on the same invoice in order to qualify. So if they say you can cancel it and then suggest you place another order for the mini separately that will be no good.
My book and pod eventually arrives on 19 Sep, 15 days after I placed the order in case you're interested.

I need some help here please!

i am working on a website thats going to be a friend loop
such as facebook myspace classmate etc. im in the proccess of
making the site now and i was wondering what i need to to to enable
useres to be able to login and create a profile page on my site?
how can i do this using DW2004 what am i looking at here? also
anyone who would be interested in helping e-mail
[email protected] we have the site up on a server but we are
far from done

> such as facebook
> myspace classmate etc. im in the proccess of making the
site now and i was
> wondering what i need to to to enable useres to be able
to login and create a
> profile page on my site?
hire a team of skilled programmers, put them in a cage and
toss money at
them.
or spend a lot of time learning how to do it yourself.
or try a free or commercial pre-written application
http://www.hotscripts.com/search/?q=myspace&cat=All&page=1&sort=&license_typ
e=free
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Need some help/advice please

Hi,
I am trying to fix a friends computer. She has a MS-6385 m/b but the keyboard does not work. When trying to boot to ME. you just hear clicks when pressing a key.
If I boot from a W98 disk, I get a beep on each keypress. The CPU seems fine as it will load the W98 boot disk OS.
I was going to try a PS2 to USB converter, but the manual implies that the USB keyboard is disabled by default and I cannot get into the the BIOS to change it.
So I am asking for any advice as to how and try to fix this, or should I just bin the m/b and try and get another socket 423 m/b with rambus slots.
TIA

Using my keyboard though a KVM switch, which works fine on my network, so its not the kbd. I reckon the ps2 connection has gone belly up, so I'm stuffed for a fix.
Looks like I will need to get another board, I have found a 6339 board, which I might use or get the Asus P4t board.

ITunes Match is driving me nuts! I need some help here please!

iTunes Match hast been stuck in the Step 2 forever, 17286 out of 17287 Songs Checked, it will always get stuck there, and this is everything I've tried so far to solve the issue:
1) Stopping the process, and turning it back on again.
2) Updating iTunes Match in the Store Menu.
3) Signing out of the iTunes Store and signing back in.
4) Quiting iTunes and restaring the application.
5) Restarting the Mac.
6) Converting all the "Waiting" iCloud Status songs to ACC 256 VRB kbps Version, deleting the originals, keeping just the converted ones.
But nothing seems to work, it will just stay there and do nothing.
I've managed to Match 13193 songs and Upload another 2964 songs, but once it has stopped uploading and here I am.
Guys, if something similar has happened to you, and you've figured it out by doing something I haven't tried yet, please let me know, it will be much appreciated.

Try the dedicated iTunes Match forum: https://discussions.apple.com/community/itunes/itunes_match

In a Bind and Needing Some Help ASAP

Hello-
I need my MacBook Pro with Safari (latest version) and OS X 10.6.6 tomorrow for a presentation and I tried just like I did with the last Flash update to install it and I messed things up. TechTracker told me there was an update for Flash so I clicked "yes" to download and install. I am new to TechTracker and installing Flash, but whatever happened my MacBook is not useable right now and it was before I clicked "OK" to update Flash.
I also tried it on my own, but there must be more detailed instructions than what Adobe makes obvious to newbies (Flash update newbies).
since I use Safari as my browser, it shows what plug-ins I have on a webpage that is part of Safari browser. First off, is it too early to update to the latest version of Flash? is this a program that I should wait awhile when a newer version comes out?
If it is OK to go ahead and update Flash, can somebody lead me to a link or website that explains how to update Flash? it obviously is not like other programs, because I have done the install ust like I would other programs or updates but I am not getting it right.
I would really appreciate it if somebody could guide me through the process or send me to a site that explains what I need to do.
Finally, I have heard that Shockwave Player (which is not installed on my macBook Pro) is a great program along with Flash to have on my macBook pro. is this true or am I risking causing more conflicts and/or problems by installing shockwave for macs once I get Flash straightened out.

Yikes, ArrayIndexOutOfBounds (stanz answer)
Here is working code that does what you want.
      * This method finds the smallest Int value in the array.
     public static int findSmallest(int[] array) {
          int min = Integer.MAX_VALUE;
          for (int i = 1; i < (array.length); i++) {
               if (array[i] < min)
                    min = array;
          return min;
     public static void main(String[] args) throws IOException {
          Test t = new Test();
          Scanner scan = new Scanner(new FileInputStream("C:\\Testing\\junk\\classes\\new.txt"));
          int size = scan.nextInt();
          scan.nextLine();
          int[] array = new int[size];
          for(int i = 0; i< size; i++)
               array[i] = scan.nextInt();
               scan.nextLine();
          int smallest = findSmallest(array);
          System.out.print(smallest);
     } // end method
Message was edited by:
SomeoneElse

Need some help publishing please!

Does anyone know how to fix this error?
iweb/site/welcomefiles/navbar-separator1.png
It pops up when trying to publish.
I understand that it has something to do with my welcome page nav bar but I have no idea the details.
Thanks!!
belizegal

If your error message is always the same, and always listing the same file as the problem, this is what I would try:
Create a new page using the same template as the problem page.
Use copy and paste to move all your personalized items (Pictures, text frames, etc) to the new page. Don't copy anything on the navbar.
Once you have done this, delete the problem page.
Try publishing.
I would wait to change the new page's name to that of the old page until you have published once.
I can't guarantee that it will work, but that is how I fixed a similar publishing error many months ago.
Kabing

Need some help here please

My computer was sent away for repairs and among other things (it was a very sick computer) it was reformatted. When I got my computer back I downloaded iTunes and plugged my iphone in. It recognised that i had a iphone and an account but I cannot do anything with it on itunes - I cant move the apps around, I cant put music on - nothing. If anyone knows how to fix this little it would be greatly appreciated.
P.S I am about as far from computer savvy as you can get so step by step instructions would be a bonus lol

By design, the iphone will sync itunes content with one computer at a time. Any attempt to sync such content with a second computer will result in ALL itunes content being first erased from your phone & then replaced with the content from the second computer. This is a design feature and cannot be overridden. The itunes content sync is one way: computer to phone. If you have photos that were synced to your phone or music ripped on your own that were not backed up, you will first have to extract them from your phone using third party software:
http://www.wideanglesoftware.com/touchcopy/index.php
Once you've done that, do the following in the order specified:
1. Disable auto sync when an ipod/iphone is connected under preferences in itunes, which in windows is under the edit menu.
2. Make sure you have one contact & one event in whatever programs you use for that purpose on your computer. The entries can be fake, doesn't matter, the important point is that these programs not be empty.
3. Connect your phone, itunes running, do not sync at this point.
4. Store>Authorize this computer.
5. File>Transfer Purchases(To make sure all purchased content on your phone will be in your itunes library).
6. Right click in the device pane & select reset warnings.
7. Right click again and select backup.
8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
9. This MUST be followed by a sync to restore your itunes content, which you select from the various tabs, You'll get a popup regarding your contacts & calendars asking to merge or replace, select merge.
That's as good as it gets without a backup of your itunes library.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.

This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

Hi! I got movies on my external hard drive that are AVI kind and won't play on my macbook pro? need some help please!!

Hi! I got Movies on my external hard drive that are AVI kind and won't play on my macbook pro? When I start playing the movie a message pops up and says "a required codec is not available". I tried flip4mac, xvid, divx already and still not playing my video. need some help please!! thanks.

Although vlc mentioned above is a much more powerful and better player you could try installing Perian if you insist on using the quicktime player. It may supply the codec it needs.
Not sure why you wouldn't be able to play straight avi files though in quicktime.

Please I need some help with a table

Hi All
I need some help with a table.
My table needs to hold prices that the user can update.
Also has a total of the column.
my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the total which will be the last row in the table?
I have a loop that gets all the values of the column, so I can get the total but it is when the user adds in a new value that I need some help with.
I have tried using but as I need to set the toal with something like total
    totalTable.setValueAt(total, totalTable.getRowCount()-1,1); I end up with an infinite loop.
Can any one please advise on some way I can get this to work ?
Thanks for reading
Craig

Hi there camickr
thanks for the help the other day
this is my full code....
package printing;
import java.awt.*;
import java.awt.event.*;
import java.awt.print.*;
import javax.swing.*;
import javax.swing.table.*;
import java.text.DecimalFormat;
public class tablePanel
    extends JDialog implements Printable {
BorderLayout borderLayout1 = new BorderLayout();
private boolean printing = false;
private Dialog1 dialog;
JPanel jPanel = new JPanel();
JTable table;
JScrollPane scrollPane1 = new JScrollPane();
DefaultTableModel model;
private String[] columnNames = {
private Object[][] data;
private String selectTotal;
private double total;
public tablePanel(Dialog1 dp) {
    dp = dialog;
    try {
      jbInit();
    catch (Exception exception) {
      exception.printStackTrace();
public tablePanel() {
    try {
      jbInit();
    catch (Exception exception) {
      exception.printStackTrace();
private void jbInit() throws Exception {
    jPanel.setLayout(borderLayout1);
    scrollPane1.setBounds(new Rectangle(260, 168, 0, 0));
    this.add(jPanel);
    jPanel.add(scrollPane1, java.awt.BorderLayout.CENTER);
    scrollPane1.getViewport().add(table);
    jPanel.setOpaque(true);
    newTable();
    addToModel();
    addRows();
    setTotal();
public static void main(String[] args) {
tablePanel tablePanel = new tablePanel();
tablePanel.pack();
tablePanel.setVisible(true);
public void setTotal() {
total = 0;
int i = table.getRowCount();
for (i = 0; i < table.getRowCount(); i++) {
    String name = (String) table.getValueAt(i, 1);
    if (!"".equals(name)) {
      if (i != table.getRowCount() - 1) {
        double dt = Double.parseDouble(name);
        total = total + dt;
String str = Double.toString(total);
table.setValueAt(str, table.getRowCount() - 1, 1);
super.repaint();
public void newTable() {
    model = new DefaultTableModel(data, columnNames) {
    table = new JTable() {
      public Component prepareRenderer(TableCellRenderer renderer,
                                       int row, int col) {
        Component c = super.prepareRenderer(renderer, row, col);
        if (printing) {
          c.setBackground(getBackground());
        else {
          if (row % 2 == 1 && !isCellSelected(row, col)) {
            c.setBackground(getBackground());
          else {
            c.setBackground(new Color(227, 239, 250));
          if (isCellSelected(row, col)) {
            c.setBackground(new Color(190, 220, 250));
        return c;
    table.addMouseListener(new MouseAdapter() {
      public void mouseClicked(MouseEvent e) {
        if (e.getClickCount() == 2) {
        if (e.getClickCount() == 1) {
          if (table.getSelectedColumn() == 1) {
   table.setTableHeader(null);
    table.setModel(model);
    scrollPane1.getViewport().add(table);
    table.getColumnModel().getColumn(1).setCellRenderer(new TableRenderDollar());
public void addToModel() {
    Object[] data = {
        "Price", "5800"};
    model.addRow(data);
public void addRows() {
    int rows = 20;
    for (int i = 0; i < rows; i++) {
      Object[] data = {
      model.addRow(data);
public void printOut() {
    PrinterJob pj = PrinterJob.getPrinterJob();
    pj.setPrintable(tablePanel.this);
    pj.printDialog();
    try {
      pj.print();
    catch (Exception PrintException) {}
public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
    Graphics2D g2 = (Graphics2D) g;
    g2.setColor(Color.black);
    int fontHeight = g2.getFontMetrics().getHeight();
    int fontDesent = g2.getFontMetrics().getDescent();
    //leave room for page number
    double pageHeight = pageFormat.getImageableHeight() - fontHeight;
    double pageWidth = pageFormat.getImageableWidth();
    double tableWidth = (double) table.getColumnModel().getTotalColumnWidth();
    double scale = 1;
    if (tableWidth >= pageWidth) {
      scale = pageWidth / tableWidth;
    double headerHeightOnPage = 16.0;
    //double headerHeightOnPage = table.getTableHeader().getHeight() * scale;
    //System.out.println("this is the hedder heigth   " + headerHeightOnPage);
    double tableWidthOnPage = tableWidth * scale;
    double oneRowHeight = (table.getRowHeight() + table.getRowMargin()) * scale;
    int numRowsOnAPage = (int) ( (pageHeight - headerHeightOnPage) / oneRowHeight);
    double pageHeightForTable = oneRowHeight *numRowsOnAPage;
    int totalNumPages = (int) Math.ceil( ( (double) table.getRowCount()) / numRowsOnAPage);
    if (pageIndex >= totalNumPages) {
      return NO_SUCH_PAGE;
    g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
//bottom center
    g2.drawString("Page: " + (pageIndex + 1 + " of " + totalNumPages), (int) pageWidth / 2 - 35, (int) (pageHeight + fontHeight - fontDesent));
    g2.translate(0f, headerHeightOnPage);
    g2.translate(0f, -pageIndex * pageHeightForTable);
    //If this piece of the table is smaller
    //than the size available,
    //clip to the appropriate bounds.
    if (pageIndex + 1 == totalNumPages) {
      int lastRowPrinted =
          numRowsOnAPage * pageIndex;
      int numRowsLeft =
          table.getRowCount()
          - lastRowPrinted;
      g2.setClip(0,
                 (int) (pageHeightForTable * pageIndex),
                 (int) Math.ceil(tableWidthOnPage),
                 (int) Math.ceil(oneRowHeight *
                                 numRowsLeft));
    //else clip to the entire area available.
    else {
      g2.setClip(0,
                 (int) (pageHeightForTable * pageIndex),
                 (int) Math.ceil(tableWidthOnPage),
                 (int) Math.ceil(pageHeightForTable));
    g2.scale(scale, scale);
    printing = true;
    try {
    table.paint(g2);
    finally {
      printing = false;
    //tableView.paint(g2);
    g2.scale(1 / scale, 1 / scale);
    g2.translate(0f, pageIndex * pageHeightForTable);
    g2.translate(0f, -headerHeightOnPage);
    g2.setClip(0, 0,
               (int) Math.ceil(tableWidthOnPage),
               (int) Math.ceil(headerHeightOnPage));
    g2.scale(scale, scale);
    //table.getTableHeader().paint(g2);
    //paint header at top
    return Printable.PAGE_EXISTS;
class TableRenderDollar extends DefaultTableCellRenderer{
    public Component getTableCellRendererComponent(
      JTable table,
      Object value,
      boolean isSelected,
      boolean isFocused,
      int row, int column) {
        setHorizontalAlignment(SwingConstants.RIGHT);
      Component component = super.getTableCellRendererComponent(
        table,
        value,
        isSelected,
        isFocused,
        row,
        column);
        if( value == null || value .equals("")){
          ( (JLabel) component).setText("");
        }else{
          double number = 0.0;
          number = new Double(value.toString()).doubleValue();
          DecimalFormat df = new DecimalFormat(",##0.00");
          ( (JLabel) component).setText(df.format(number));
      return component;
}

BBM icon missing after update. need help asap please

Hi I'm using a bb bold 9780 and my bbm is 5.0.1.45 and when I tried updating it, it hangs whenever it finishes installing. And when I tired a battery pull, my bbm icon goes missing. Any idea how to solve this issue? Could really need some help here cos its quite impt. Thank you in advance
Solved!
Go to Solution.

When you get a chance, do a battery pull. When the red light goes away on the front of the phone, hold down the back button the entire time while the phone is booting up. When the boot is complete, the phone will enter safe mode.
http://btsc.webapps.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB17877
Try to delete it from there and do another battery pull / reinstall.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

TS2634 Please People I need some help.My iPod is disabled and when I connect it to iTunes it says: Itunes could not connect to the ipod because it is locked with a passcode...

Please People I need some help.My iPod is disabled and when I connect it to iTunes it says: Itunes could not connect to the ipod because it is locked with a passcode...how can I do it?

Place the iPod in Recovery mode and then restore.

Need some help asap! Please

Similar Messages

Maybe you are looking for