Need some help embedding a url into a swf file

Hi all
Thanks to help I have received here, I am almost done with my add banner. I need the banner to link to a url.
The entire banner needs to be a clickable link for the duration of the animation. So anyone can click on the banner at any point during the animation, and be brought to my site. I tried putting a frame at the end with getURL("http://www.mybsite", "_blank"); but that doesnt work. When I do that, the banner is not a clickable link, but the site opens automatically after the animation has played. Cant have that. So after doing some research, the apparent correct way to do this is by making a button, but I do that and the button obsures everything else.
Any ideas on what I should do?
Thanks in advance.

if nothing else is clickable, attached to your main timeline:
this.onRelease=function(){
getURL(whatever,"_blank");

Similar Messages

I need some help to move volume button in flash file.

Hello,
If anyone can help with this 2 issues I’ll be very glad.
I have this swf file to which I need to move the volume button to another place because my flash will be smaller and the button its not visible there. I have a picture attached with correct position. Actually I haver managed to move it myself using Adobe Flash Pro, but as I export the fla file to swf it results a mess. I have tried also with Sothskin Quicker with same results.
2. I need the main pictures to have direct links to my prefferance i.e. www.mysite.com/forum. I don’t know where to enter it.
I attached the 1Mb rar file with swf , xml and correct position. http://www.fileswap.com/dl/hihoGYdQZx/
Thank you

Try downloading the installer(s) from the links in http://forums.adobe.com/thread/889580

Need some help with DNG and error parsing the files

Ok, so I found out that I can't open NEF files with CS2 from my Nikon D3100 - unless I upgrade to CS6, or use the DNG converter. I did download the DNG converter that came with the Camera RAW 3.7 (for CS2) in one of Adobe's links, but when I try to convert the NEF files, the DNG converter says "There is an error parsing the file". If it helps, I have Windows 7. Is there a different version of the DNG converter I should be using? Thanks!

A simple Google search will find it. For some reason it isn't on the Adobe website. If you upgrade to CS6 you'll find much improvement in your raw conversions.
http://blogs.adobe.com/lightroomjournal/2012/12/camera-raw-7-3-and-dng-converter-7-3-now-a vailable.html

Alright guys I need some help here with itunes and my music files

Basically, I've had two apple accounts in the past like 4 years. One day I connect my Ipod touch to my computer and downloaded an update from Itunes, not knowing that it erases all your content. I didnt have my music files backed up either, so I ended up losing over $300 worth of music and apps. Ever since then I never updated my touch, from the fear of losing my music. Now that I have my own apple account, I have music files from the first account and my account. My question is how can I back both of these groups of files up and update my ipod without losing any of this content!? I would really appreciate a step by step process etc. Thanks guys for helping me out!
-Colin Wagner

You can always redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
You can transfer iTunes purchases to your computer by:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

Need some help in debugging this exported script

Below is DDL generated by visio forward engineering tool . The example below consists of 2 test tables with one foreign key.
Forward engineering generated DDL script
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table1]') AND type in (N'U'))
DROP TABLE [dbo].[Table1]
GO
CREATE TABLE [dbo].[Table1] (
[test] CHAR(10) NOT NULL
, [test2] CHAR(10) NULL
GO
ALTER TABLE [dbo].[Table1] ADD CONSTRAINT [Table1_PK] PRIMARY KEY CLUSTERED (
[test]
GO
GO
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table2]') AND type in (N'U'))
DROP TABLE [dbo].[Table2]
GO
CREATE TABLE [dbo].[Table2] (
[test2] CHAR(10) NOT NULL
GO
ALTER TABLE [dbo].[Table2] ADD CONSTRAINT [Table2_PK] PRIMARY KEY CLUSTERED (
[test2]
GO
GO
ALTER TABLE [dbo].[Table1] WITH CHECK ADD CONSTRAINT [Table2_Table1_FK1] FOREIGN KEY (
[test2]
REFERENCES [dbo].[Table2] (
[test2]
GO
GO
When i converted this DDL script using scratch editor the migration tool gave some errors can anyone help me to resolve below
DECLARE
v_temp NUMBER(1, 0) := 0;
BEGIN
BEGIN
SELECT 1 INTO v_temp
FROM DUAL
WHERE EXISTS ( SELECT *
FROM objects
WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table1]')*/
AND TYPE IN ( N'U' )
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
IF v_temp = 1 THEN
TRUNCATE TABLE Table1;
END IF;
END;
CREATE TABLE Table1
test CHAR(10) NOT NULL,
test2 CHAR(10)
ALTER TABLE Table1
ADD
CONSTRAINT Table1_PK PRIMARY KEY( test );
--SQLDEV:Following Line Not Recognized
DECLARE
v_temp NUMBER(1, 0) := 0;
BEGIN
BEGIN
SELECT 1 INTO v_temp
FROM DUAL
WHERE EXISTS ( SELECT *
FROM objects
WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table2]')*/
AND TYPE IN ( N'U' )
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
IF v_temp = 1 THEN
TRUNCATE TABLE Table2;
END IF;
END;
CREATE TABLE Table2
test2 CHAR(10) NOT NULL
ALTER TABLE Table2
ADD
CONSTRAINT Table2_PK PRIMARY KEY( test2 );
--SQLDEV:Following Line Not Recognized
ALTER TABLE Table1
ADD
CONSTRAINT Table2_Table1_FK1 FOREIGN KEY( test2 ) REFERENCES Table2 (test2)
--SQLDEV:Following Line Not Recognized
;

Pl do not post duplicates - Need some help in debugging this script

Need Some help in Developing an ALV report ..Plz help me

Hi Experts I am basic learner to ABAP Here I need some help in developing a Delivery *** Invoice Report....Please help me by spending a little time..
Tables are VBAK VBAP LIPS LIKP   and Document floe table is VBFA
SELECT VBELN VKORG VTWEG SPART
    FROM VBAK
    INTO TABLE I_VBAK
    WHERE VBELN IN S_VBELN.
IF I_VBAK IS NOT INITIAL .
    SELECT VBELN POSNR MATKL POSAR WERKS
      FROM VBAP
      INTO TABLE I_VBAP
      FOR ALL ENTRIES IN I_VBAK
      WHERE VBELN = I_VBAK-VBELN.
ENDIF.
IF I_VBAP IS NOT INITIAL.
    SELECT * FROM LIPS
      INTO CORRESPONDING FIELDS OF TABLE I_LIPS
      WHERE VGBEL = VBAP-VBELN
      AND VGPOS = VBAP-POSNR.
ENDIF.
IF I_LIPS IS NOT INITIAL.
    SELECT VBELN VSTEL VKORG KUNNR
    FROM LIKP
    INTO TABLE I_LIKP.
ENDIF.
Moderator message : Outsourcing is not allowed, don't expect others to correct your source code. Thread locked.
Edited by: Vinod Kumar on Aug 1, 2011 5:43 PM

hi ,
Look in this link
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/b3/0ef3e8396111d5b2e80050da4c74dc/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/b3/0ef3e8396111d5b2e80050da4c74dc/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/content.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62bfe07211d2acb80000e829fbfe/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62bfe07211d2acb80000e829fbfe/content.htm</a>
Regards
Renjith Kumar

My airport problem has returned big time --Need some Help!!

Aloha once again:
I though that this was fixed by simply changing channels on my airport router, but that fix only lasted for a few days, but now it's back and even worse. Let me give you some background on this problem. Here's my original message concerning the problem:
I have my Airport Router connected to the Internet via DSLcable. I then tie my two computers into the internet via their airport cards. For about 6 months this system has been working just fine. Recently my desktop computer quit listening to the router and can no longer connect to the internet. It shows no signal strength and the name of the network on the Airport is not seen in the "connect to internet" panel. The same Airport works just fine on my LapTop and I am using it right now to get this message off to the internet.
I have fixed permissions, removed the airport card and cleaned the connector, the antenna plug and removed the system configuration folder from library preferences all to no avail!
This problem has been hounding me, intermittently, for over a year now What can I do to remedy this??? HELP!!!!
Dan Page
Maui, Hawaii
The suggestion to change channels, that came from this original request, worked but just for a very short time. Now I have to shut down my computer overnight to get connected and then it only lasts for several hours and the connection quits.
I thought maybe heat was a problem, but the last time it happened I opened the computer and played a large fan right on the card. This did not help. I shut it down for the night and it was fine the next morning for about 2 hours.
One new data point; if I turn off just the airport on my laptop computer overnight, that will fix the problem for a short time also.
Still need some help!!!
Dan

First, power off both the Time Capsule and AirPort Express.
Wait a few minutes, then power up the Time Capsule first, and let it run for a few minutes.
Temporarily, move the AirPort Express to the same room or close proximity to the AirPort Express and power it up.
If the Express powers up correctly, power it off again and move it approximately half the distance between the Time Capsule and the general area that needs more wireless coverage. Try to minimize obstructions like walls, ceiling, heavy furniture, etc as much as possible.
Please report on your results.

Hi, can anyone help me out with this, I need some help on designing GUI for e-learning coursewares. Some tutorials or some helpful sites will do.

I need some help with the GUI design.

Have you tried the line inputs on the back of your FirePod? If you update its firmware (not sure if you will need to or not), I seem to remember hearing that the FirePod can run without FW connection, i.e. stand alone. In this mode with the outs from your mixer into line ins 1-2 (2nd from left on the back) it should work fine. I say should because I have never tried. However, these are used for returns from an external effects unit. I assume here, and the important word is assume, that there are two so that they can be used as a stereo send or as a mono send. Worth a try! Let us know how it goes.
Best, Fred

Need some help with a remove function

Design and code a program that will maintain a list of product names. Use a String type to represent the product name and an array of strings to implement the list. Your program must implement the following methods:
Add a product to the list
Remove a product from the list
Display then entire list
Find out if a particular product is on the list.
You need to create a command command loop with a menu() function. The program must continue asking for input until the user stops.
This is the assignment and this is what I have so far. I need some help writing the remove function.
Thanks
* Title: SimpleSearchableList.java
* Description: this example will show a reasonably efficient and
* simple algorithm for rearranging the value in an array
* in ascending order.
public class SimpleSearchableList {
     private static String[] List = new String[25]; //These variables (field variables)
     private static int Size; //are common to the entire class, but unavailable
     //except to the methods of the class...
     public static void main(String[] args)
          String Cmd;
          for(;;) {
               Menu();
               System.out.print("Command: ");
               Cmd = SimpleIO.inputString();
               if(Cmd.equals("Quit"))
                    break;
               else if(Cmd.equals("Fill"))
                    FillList();
               else if(Cmd.equals("Search"))
                    SearchList();
               else if(Cmd.equals("Show"))
                    ShowList();
               else if(Cmd.equals("Remove"))
                    Remove();
     //Tells you what you can do...
     public static void Menu()
          System.out.println("Choices..................................");
          System.out.println("\tFill to Enter Product");
          System.out.println("\tShow to Show Products");
          System.out.println("\tSearch to Search for Product");
          System.out.println("\tRemove a Product");
          System.out.println("\tQuit");
          System.out.println(".........................................");
     //This method will allow the user to fill an array with values...
     public static void FillList()
          int Count;
          System.out.println("Type Stop to Stop");
          for(Count = 0 ; Count < List.length ; Count++)
               System.out.print("Enter Product: ");
               List[Count] = SimpleIO.inputString();
               if(List[Count].equals("Stop"))
                    break;
          Size = Count;
     //This method will rearrange the values in the array so that
     // go from smallest to largest (ascending) order...
     public static void SearchList()
          String KeyValue;
          boolean NotFoundFlag;
          int Z;
          System.out.println("Enter Product Names Below, Stop To Quit");
          while(true)
               System.out.print("Enter: ");
               KeyValue = SimpleIO.inputString();
               if(KeyValue.equals("Stop")) //Note the use of a method for testing
                    break; // for equality...
               NotFoundFlag = true; //We'll assume the negative
               for(Z = 0 ; Z < Size ; Z++)
                    if(List[Z].equals(KeyValue)) {
                         NotFoundFlag = false; //If we fine the name, we'll reset the flag
          System.out.println(List[Z] + " was found");
               if(NotFoundFlag)
                    System.out.println(KeyValue + " was not found");
     //This method will display the contents of the array...
     public static void ShowList()
          int Z;
          for(Z = 0 ; Z < Size ; Z++)
               System.out.println("Product " + (Z+1) + " = " + List[Z]);
     public static void Remove()
}

I need help removing a product from the arrayYes. So what's your problem?
"Doctor, I need help."
"What's wrong?"
"I need help!"
Great.
By the way, you can't remove anything from an array. You'll have to copy the remaining stuff into a new one, or maybe maintain a list of "empty" slots. Or null the slots and handle that. The first way will be the easiest though.

Need some help with downloading PDF's from the net.

need some help with downloading PDF's from the net. Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen? any suggestions?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Cannot get slide show in full screen mode to come up on secondary monitor regardless of how I set up show it always opens on primary screen. Need some help here.

Slide show in PowerPosint for mac 2011 on iMac will not open full screen mode on secondary monitor. Regardless of how I set the slide show preferences it always opens on primary monior with secondardy monitor having totally balck screen. Need some help if anyone else has run into this problem.

You should contact Microsoft for Mac Support and/or post in their forums.

Need some help with the Select query.

Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
        VKORG TYPE VBAK-VKORG,
        ABGRU TYPE VBAP-ABGRU,
       END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
Developer

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

Error in internet recovery need some Help.

Hello i need some help with this kind of error on my Macbook pro upon recovering in the internet using wifi..
[URL=http://s617.photobucket.com/user/jrockers_143/media/IMG_0101_zps679fa98a.jpg.htm l][IMG]http://i617.photobucket.com/albums/tt254/jrockers_143/IMG_0101_zps679fa98a.jpg[/IMG][/URL]
does anybody knows how to solve this..

Never mind, after a lot of searching adn BS, finally found a tutorial on Youtube on how to get apps without a credit card.
Apple, make your system easier for people out of their country, and people without a credit card.

Trying to make a photo contest need some help

Trying to make a photo contest need some help. I am running a
fish photo contest on my website and was wondering if any of you
could give me some advice on some good extensions to help me do
this easier. Basically I want a page where people upload a file and
then it automatically resizes the image and puts it on a page,
where people can vote on the pictures.

Hi Pilot,
Column B contains the sale amounts.
Column C will contain the tax amounts.
I'm assuming a header row, and the first line of data to be row 2.
In C2, enter: =B*20%
Click Accept, then use the mouse to drag the small round handle at the lower right of the selected cell (C2) to fill the formula into the rest of the cells in column C.
This simple version of the formula will put zeros in all column C cells where no amount has been entered in the corresponding cell in column B. The revised formula below takes care of that.
C2: =IF(B,B*20%,"")
I'd strongly suggest that 'rookies', as you describe yourself, download and read both the Numbers User Guide and the Functions and Formulas User Guide. Both are available from the Help menu in Numbers. If you use Pages and Keynote, you should use the Help menu in those applications to download their User Guides as well. The guides are searchable pdf files, well written, easy to read, and useful to rookies and old hands as well.
Regards,
Barry

Need some help embedding a url into a swf file

Similar Messages

Maybe you are looking for