Need some help in developing reports
hi,
I want to develop some reports in java. I dont know how to develop them.can any one help me??
What skills do you have? You'll want to learn programming, Java, SQL, JDBC, and some kind of output system (HTML, XML, PDF generation, ...)
Start googling for things like "JDBC tutorial", "SQL tutorial", ... Or go to school that has suitable classes. Or go to a book store.
Similar Messages
-
Need Some help in Developing an ALV report ..Plz help me
Hi Experts I am basic learner to ABAP Here I need some help in developing a Delivery *** Invoice Report....Please help me by spending a little time..
Tables are VBAK VBAP LIPS LIKP and Document floe table is VBFA
SELECT VBELN VKORG VTWEG SPART
FROM VBAK
INTO TABLE I_VBAK
WHERE VBELN IN S_VBELN.
IF I_VBAK IS NOT INITIAL .
SELECT VBELN POSNR MATKL POSAR WERKS
FROM VBAP
INTO TABLE I_VBAP
FOR ALL ENTRIES IN I_VBAK
WHERE VBELN = I_VBAK-VBELN.
ENDIF.
IF I_VBAP IS NOT INITIAL.
SELECT * FROM LIPS
INTO CORRESPONDING FIELDS OF TABLE I_LIPS
WHERE VGBEL = VBAP-VBELN
AND VGPOS = VBAP-POSNR.
ENDIF.
IF I_LIPS IS NOT INITIAL.
SELECT VBELN VSTEL VKORG KUNNR
FROM LIKP
INTO TABLE I_LIKP.
ENDIF.
Moderator message : Outsourcing is not allowed, don't expect others to correct your source code. Thread locked.
Edited by: Vinod Kumar on Aug 1, 2011 5:43 PMhi ,
Look in this link
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/b3/0ef3e8396111d5b2e80050da4c74dc/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/b3/0ef3e8396111d5b2e80050da4c74dc/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/content.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62bfe07211d2acb80000e829fbfe/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62bfe07211d2acb80000e829fbfe/content.htm</a>
Regards
Renjith Kumar -
Need some help in developing routines
Hi Ajay/all,
I need some help in writing the routines to my business requirement. If you could send me your mail id I could mail you the requirement.I appreciate ur response.
Thanks.hi ,
Look in this link
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/b3/0ef3e8396111d5b2e80050da4c74dc/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/b3/0ef3e8396111d5b2e80050da4c74dc/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/content.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62bfe07211d2acb80000e829fbfe/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62bfe07211d2acb80000e829fbfe/content.htm</a>
Regards
Renjith Kumar -
I need some help to develop the action class.
my total concept is , browse a file and upload then after i want save that file in some folder in my system with same formatte (if u browse a 1.txt file then i want to save that file same c: temp/1.txt same formate )how can i do that? i know i have to develop the code in action class but what kind of code i have to develop.
i suceed to upload the file but i dont have the idea to save that file in my system. but i dont know how can i save my file in the c:temp folder.?
please help me.The authentication is something you can do with either https (secure the transport) or with WS-Security (Secure the message). You can add that with JDeveloper by using the context menu on a webservice.
To create a webservice:
- specify the xsd
- create the wsdl
- Generate a Java webservice using JDeveloper
- implement the class to return the content of the request.
Regards,
Lonneke -
Need some help to develop a 3d graph plotter
Problem description : Certain numbers are being stored in a mySQL database. The java program has to extract these numbers and then make a 3D plot based on these coordinates. I have been asked to look for a JAVA based freeware which will do the plotting part.
If any of you know of any such product, or could provide any oter information regarding this, please post here.
TIA.
P.S : not sure if i am posting in the right section, sorry if i am not.Post Author: V361
CA Forum: Formula
This will look at string test1 "the MICR Line" for string test2 (The aba #)
You can then pull the first 3 characters of the MICR line and last 4 of the MICR line as in this example I added some # signs to seperate the fields out, but you do not have to have them for it to work.
If (instr({@Test1},{@Test2}) > 0 )then left({@Test1},3) & " # " & {@Test2}& " # " & right ({@Test1},4) else " NO MATCH "
@test1 =
12345678910111213
@test2 =
567891011
Output =
123 # 567891011 # 1213 -
Need some help with GUI development
Hi ppl.. I am new to labview and I am currently involved in a testing equipment development. I need some help. firstly I need to know if multi-screen GUI (with icons and stuff)is possible in Labview. Secondly I need to interface the measurements to a database. Would it be possible to create just small executable to perform the measurement part alone and do the rest of database operation using VB. (or would it be advisable to do the whole lot in labview)
the final sft should look something like this
screen1 :setup screen... interface with database
screen2 :actual test and test results
screen3 :log file creation
measurement is via daq board and i also need to send some control signals and set up TCP/IP for data transfer.Hello.
I am not completely sure what you mean by "multi-screen", but I am pretty sure that doing the user interface using a tab control will work for you. I have attached an example VI which is a state machine (which in LabVIEW you do with a case structure inside a while loop). Notice how the configuration controls are in the first page of the tab control, associated with state 0 of the state machine, but in the block diagram, they are actually used in state 1 of the state machine. Instead of writing a very long description, I will let you take a look at the code (which I saved in LV 7.0 version). Let me know if you have questions or comments
Attachments:
MultiScreenStateMachineExample.vi 50 KB -
My airport problem has returned big time --Need some Help!!
Aloha once again:
I though that this was fixed by simply changing channels on my airport router, but that fix only lasted for a few days, but now it's back and even worse. Let me give you some background on this problem. Here's my original message concerning the problem:
I have my Airport Router connected to the Internet via DSLcable. I then tie my two computers into the internet via their airport cards. For about 6 months this system has been working just fine. Recently my desktop computer quit listening to the router and can no longer connect to the internet. It shows no signal strength and the name of the network on the Airport is not seen in the "connect to internet" panel. The same Airport works just fine on my LapTop and I am using it right now to get this message off to the internet.
I have fixed permissions, removed the airport card and cleaned the connector, the antenna plug and removed the system configuration folder from library preferences all to no avail!
This problem has been hounding me, intermittently, for over a year now What can I do to remedy this??? HELP!!!!
Dan Page
Maui, Hawaii
The suggestion to change channels, that came from this original request, worked but just for a very short time. Now I have to shut down my computer overnight to get connected and then it only lasts for several hours and the connection quits.
I thought maybe heat was a problem, but the last time it happened I opened the computer and played a large fan right on the card. This did not help. I shut it down for the night and it was fine the next morning for about 2 hours.
One new data point; if I turn off just the airport on my laptop computer overnight, that will fix the problem for a short time also.
Still need some help!!!
DanFirst, power off both the Time Capsule and AirPort Express.
Wait a few minutes, then power up the Time Capsule first, and let it run for a few minutes.
Temporarily, move the AirPort Express to the same room or close proximity to the AirPort Express and power it up.
If the Express powers up correctly, power it off again and move it approximately half the distance between the Time Capsule and the general area that needs more wireless coverage. Try to minimize obstructions like walls, ceiling, heavy furniture, etc as much as possible.
Please report on your results. -
Need some help with social net site
I need to create a site with editable user profiles, the site
will feature sports stats that the user can update.
I use Dreamweaver and MYSQL but I need some direction. Im
starting from scratch here, are there any templates or free source
code to go off of? I really need some help!!"Funks Da Burn" <[email protected]> wrote in
message
news:g1np74$eej$[email protected]..
>I need to create a site with editable user profiles, the
site will feature
> sports stats that the user can update.
> I use Dreamweaver and MYSQL but I need some direction.
Im starting from
> scratch here, are there any templates or free source
code to go off of? I
> really need some help!!
That's not something you can do using templates or by
dropping in a free
script; it's pretty complicated. You need to know how to
design a database
and write server-side code. Dreamweaver will help you write
the code, but
you still need to plan and design the whole application. I'd
recommend
starting with a book. It sounds like PHP is going to be your
best bet - does
your host server support it? If so, do a search on Amazon.com
for books on
Dreamweaver and PHP, and/or ask for recommendations here.
Patty Ayers | www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet -
Need some help with the Select query.
Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
DeveloperHello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer. -
We have a set of oracle clients running on T5220 zones that need some help
Greetings all -
We have a set of oracle clients running on T5220 zones that need some help.
If, for example, I execute the query "select (all) from dba_objects", trace output reports 90% of the elapsed time spent under "SQLNet message from client".
Here are OS details for the clients: Solaris 10 5/08 s10s_u5wos_10 SPARC
Running "uname -a" from the client gives:
(SunOS bmc-ste-app 5.10 Generic_127127-11 sun4v sparc SUNW,SPARC-Enterprise-T5220)
Here are OS details for the dataserver: Enterprise Linux Enterprise Linux Server release 5.2
Running "uname -a" from the dataserver gives:
(2.6.18-92.1.6.0.2.el5 #1 SMP Thu Jun 26 17:44:55 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux)
The RDBMS is 10.2.0.4
Again, please note, there is no application in the picture here. We are just running a simple catalog query (select * from dba_objects) from sqlplus. Why the wait on something like this? The wait also occurs when a different query is used (select (all) from SYS.COL$ where rownum < 50000). And it doesn't matter if I used the full client or the instant client. I still get the same high-wait.
We had thought - maybe this is a network thing - so we put a test client on the same subnet as the dataserver. This helped - but not enough. The wait is still way too high even with firewalls taken out of the equation.
We've also looked at arraysize, SDU, kernel settings. And we've spent time going over tkprof, truss and sqlnet-tracing.
Has anyone ever had to solve this HIGH WAIT ON CLIENT issue? Is there a work around or some tweak I'm missing.
Is anyone configured like we are (linux dataserver, solaris clients)? If so - did you see anything like this?
tia -
Jim
Edited by: jim1768 on Mar 31, 2010 1:47 PM
Edited by: jim1768 on Mar 31, 2010 2:12 PM
Edited by: jim1768 on Mar 31, 2010 2:13 PMHello,
We have the exact same issue. Did you ever solve this issue? We have a t5220 and have just upgraded our 11.5.10.2 11i system on it from 9.2.0.8 32-bit sparc to 11.2.0.1 64-bit sparc. Things should be faster but arent, and our consultant has tracked it down to high wait times when the apps tier using forms connects to the database tier on the same box. So even though the t5220 is both server and client, there is something about the client sql connection.through TNS that his having trouble. Thanks for any information. We've also created an S/R with Oracle.
Note: I am well aware of the other issues with the CMT server series but this particular issue seems independent of the regular / known issues and remains a mystery to us. Other known issues with the CMT servers for SPARC:
Metalink Note 781763.1 (Migration from fast single threaded CPU machine to CMT UltraSPARC T1 & T2)
http://blogs.sun.com/glennf/resource/Optimizing_Oracle_CMT_v1.pdf
http://blogs.sun.com/glennf/tags/throughput
http://blogs.sun.com/glennf/entry/getting_past_go_with_sparc
http://www.oracle.com/apps_benchmark/doc/E-Bus-11i-PAY_ORA_SUN-T5220.pdf (this paper has some oracle init settings at the end. The kernel settings have been included in the OS upgrade)
http://blogs.sun.com/mandalika/entry/siebel_on_sun_cmt_hardware -
Need some help with color on a column.
Hello
I need some help on how I can set the color on either column header or the whole column.
I have a report with where the first row display a total sum. The rows under that are htmldb_item.text where the user may input some values.
The sum of these textboxes should match the the total column on top. If it does not match then the header or column should be marked red.
I have one pl/sql prosess where i check this, and i return a message for that column, can I in this prosess set the column color for the report?
report looks like this
total1----total2----total3....
box1-----box2-----box3....
box1-----box2-----box3....
box1-----box2-----box3....
box1-----box2-----box3....
so if the sum of all the box1s do not match total1 then column or header is red.
thanks,
AndersHi Anders,
have a look at Carls example: http://htmldb.oracle.com/pls/otn/f?p=11933:7:3740381051529350
It works with row template, but maybe you can change it for working with column templates.
chrissy -
Need some help with threads...
Hello all,
I am working on a project at work, and I am not the best programmer in the world. I have been trying to get my head around this for a couple of days and just cannot get it to work.
I am writing an instrumentation control program that will have three threads. One is the GUI, one will receive control information and set up the hardware, and one will check the hardware status and report it to the GUI periodically. I plan on using the invokeLater() method to communicate the status to the GUI and change the status display in the GUI. Communication from the GUI to the controller thread and from the status thread to the controller thread I had planned on being piped input/output stream as appropriate. I have a control class and a status class that need to be communicated over these piped streams. In some trial code I have been unable to wrap the piped input/output streams with object input/output streams. I really need some help with this. Here is the main thread code:
package playingwiththreads1;
import java.io.*;*
*public class PlayingWithThreads1 {*
public static void main(String[] args) {*
* PipedOutputStream outputPipe = new PipedOutputStream();*
* ObjectOutputStream oos = null;*
* ReceiverThread rt = new ReceiverThread(outputPipe);*
// Start the thread -- First try*
* Thread t = new Thread(rt);*
t.start();*
// Wrap the output pipe with an ObjectOutputStream*
try*
oos = new ObjectOutputStream(outputPipe);*
catch (IOException e)*
System.out.println(e);*
// Start the thread -- Second try*
//Thread t = new Thread(rt);*
//t.start();*
/** Send an object over the pipe. In reality this object will be a
class that contains control or status information */
try
if (!oos.equals(null))
oos.writeObject(new String ("Test"));
catch (IOException e)
try
Thread.sleep(5000);
catch (InterruptedException e)
I read somewhere that it matters where you start the thread relative to where you wrap piped streams with the object streams. So, I tried the two places I felt were obvious to start the thread. These are noted in the comments. Here is the code for the thread.
package playingwiththreads1;
import java.io.*;
public class ReceiverThread implements Runnable {
private PipedInputStream inputPipe = new PipedInputStream();
private ObjectInputStream inputObject;
ReceiverThread (PipedOutputStream outputPipe)
System.out.println("Thread initialization - start");
try
inputPipe.connect(outputPipe);
inputObject = new ObjectInputStream(inputPipe);
catch (IOException e)
System.out.println(e);
System.out.println("Thread initialization - complete");
public void run()
System.out.println("Thread started");
try
if (inputObject.available() > 0)
System.out.println(inputObject.read());
catch (IOException e)
System.out.println(e);
Through testing I have determined that no matter where I start the thread, the thread never gets past the "inputObject = new ObjectInputStream(inputPipe);" assignment.
Could someone please help me with this? There are other ways for me to write this program, but this is the one that I would like to make work.
Many thanks in advance,
Rob Hix
Edited by: RobertHix on Oct 6, 2009 3:54 AMThanks for the help, but that did not work. I tried flushing the ObjectOutputStream and it is still hanging when initializing the thread.
Here is a better look at the code since I was helped to figure out how to insert it:
The main method:
package playingwiththreads1;
import java.io.*;
public class PlayingWithThreads1 {
public static void main(String[] args) {
PipedOutputStream outputPipe = new PipedOutputStream();
ObjectOutputStream oos = null;
ReceiverThread rt = new ReceiverThread(outputPipe);
// Start the thread -- First try
//Thread t = new Thread(rt);
//t.start();
// Wrap the output pipe with an ObjectOutputStream
try
oos = new ObjectOutputStream(outputPipe);
oos.flush();
catch (IOException e)
System.out.println(e);
// Start the thread -- Second try
Thread t = new Thread(rt);
t.start();
/* Send an object over the pipe. In reality this object will be a
* class that contains control or status information */
try
if (!oos.equals(null))
oos.writeObject(new String ("Test"));
oos.flush();
catch (IOException e)
System.out.pringln(e);
try
Thread.sleep(5000);
catch (InterruptedException e)
}The thread code:
package playingwiththreads1;
import java.io.*;
public class ReceiverThread implements Runnable {
private PipedInputStream inputPipe = new PipedInputStream();
private ObjectInputStream inputObject;
ReceiverThread (PipedOutputStream outputPipe)
System.out.println("Thread initialization - start");
try
inputPipe.connect(outputPipe);
inputObject = new ObjectInputStream(inputPipe);
catch (IOException e)
System.out.println(e);
System.out.println("Thread initialization - complete");
public void run()
System.out.println("Thread started");
try
if (inputObject.available() > 0)
System.out.println(inputObject.read());
catch (IOException e)
System.out.println(e);
}Does anyone else have and ideas? -
Need some help understanding the way materialized views are applied through
Hi, I need some help understanding the way materialized views are applied through adpatch.
In patch 1, we have a mv with build mode immediate. When applying it PTS hang due to pool performance of mv refresh.
So we provide patch 2, with that mv build mode deferred, hoping it'll go through. But patch 2 hang too on the same mv.
How does this work? Is that because mv already exists in the database with build immediate, patch 2 will force it to refresh first before changing build mode? How to get over this?
Thanks,
WeiHi Hussein,
Thank you for the response.
Application release is 11.5.10.
Patch 1 is MSC11510: 8639586 ASCP ENGINE RUP#38 PATCH FOR 11.5.10 BRANCH
Patch 2 is MSC11510: 9001833 APCC MSC_PHUB_CUSTOMERS_MV WORKER IS STUCK ON "DB FILE SEQUENTIAL READ" 12 HOURS
The MV is APPS.MSC_PHUB_CUSTOMERS_MV
This happens at customer environment but not reproducable in our internal environment, as our testing data is much smaller.
Taking closer look in the logs, I saw actually when applying both patch 1 and patch 2, MV doesn't exist in the database. So seems my previous assumption is wrong. Still, strange that patch 2 contains only one file which is the MV.xdf, it took 7 hours and finally got killed.
-- patch 1 log
Materialized View Name is MSC_PHUB_CUSTOMERS_MV
Materialized View does not exist in the target database
Executing create Statement
Create Statement is
CREATE MATERIALIZED VIEW "APPS"."MSC_PHUB_CUSTOMERS_MV"
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 10 MAXTRANS 255 LOGGING
STORAGE(INITIAL 4096 NEXT 131072 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 4 FREELIST GROUPS 4 BUFFER_POOL DEFAULT)
TABLESPACE "APPS_TS_SUMMARY"
BUILD IMMEDIATE
USING INDEX
REFRESH FORCE ON DEMAND
WITH ROWID USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS select distinct
from
dual
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Feb 02 2010 10:01:46
Manager says to quit.
-- patch 2 log
Materialized View Name is MSC_PHUB_CUSTOMERS_MV
Materialized View does not exist in the target database
Executing create Statement
Create Statement is
CREATE MATERIALIZED VIEW "APPS"."MSC_PHUB_CUSTOMERS_MV"
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 10 MAXTRANS 255 LOGGING
STORAGE(INITIAL 4096 NEXT 131072 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 4 FREELIST GROUPS 4 BUFFER_POOL DEFAULT)
TABLESPACE "APPS_TS_SUMMARY"
BUILD DEFERRED
USING INDEX
REFRESH COMPLETE ON DEMAND
WITH ROWID USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS select distinct
from dual
Start time for statement above is Tue Feb 02 10:05:06 GMT 2010
Exception occured ORA-00028: your session has been killed
ORA-00028: your session has been killed
ORA-06512: at "APPS.AD_MV", line 116
ORA-06512: at "APPS.AD_MV", line 258
ORA-06512: at line 1
java.sql.SQLException: ORA-00028: your session has been killed
ORA-00028: your session has been killed
ORA-06512: at "APPS.AD_MV", line 116
ORA-06512: at "APPS.AD_MV", line 258
ORA-06512: at line 1
Exception occured :No more data to read from socket
AD Run Java Command is complete.
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Feb 02 2010 19:51:27
Start time for statement above is Tue Feb 02 12:44:52 GMT 2010
End time for statement above is Tue Feb 02 19:51:29 GMT 2010
Thanks,
Wei -
Need some help learning cue points, etc
I need some help with a Flash project I'm working on. If any
Flash junkies out there are up for sitting down with me through
email or IM and helping me get to the point where I have a template
FLA doing what I want to do, I'd be willing to pay you. It wouldn't
be much, but it would be something. Here's what I'm trying to do:
I need to create an interactive talking-head style flash
presentation with a number of progressive download externally
linked FLV files, playing in succession, supported by movie-clip
text animations and supporting graphics which are triggered by cue
points in the video. I also need a simple navigation menu linking
to the FLV files. I've got some of this down already, namely, I've
laid the FLVs in and they are playing in succession. I'm stuck on
the cue point part. At this point I really just need some hands-on
help. I've bought books, I've scoured the web.
I'm easy to communicate with, and I'm good with computers and
comfortable in many multimedia design programs. Flash is very
powerful, but tougher to learn than I expected, and I'm at the end
of my rope =PMy advice... start with a very simple "proof of concept" project before you attempt the entire package.
It will be much easier to scale up if you first have a very good understanding of what's going on.
So one simple video with just one cuepoint and only one button and additional display. You'll also have to work out the interaction of pausing the video when a cuepoint is reached or button pushed to display the graph, giving the viewer time to read the graph... then when the viewer closes the graph, the video should "resume".
Start very simple and build on that only after you understand the fundamentals.
Second, you mention "video reports"... plural. So that most likely means that you will need a video player with a "playlist".
This may mean that you'll need to learn to use a little .xml to bring in the playlist data. You may also find xml an excellant way to bring other data into you project.
At the link listed above there is an excellant tutorial on "Integrating Flash and XML"
"Flash and XML"
"XML Video Playlist"
"ActionScript 3 XML Basics"
"ActionScript 3 Advanced XML"
Personally I would not even begin a project like this without considering how I could use xml to feed data into the project.
Here's an example of a video player I created that has a playlist, thumbnails, categories, transcipts, "Now Playing" etc. All that data comes into the main .swf via various xml files. Super good way in input data into Flash.
http://www.drheimer.com/video/
Yours is a rather ambitious project and will take awhile to gain the skill and assemble the pieces. So when you come to a new part... first create a real simple "proof of concept" model so you can learn how that section works. Don't expect to be able to assemble the entire project all at once.
Best wishes,
Adninjastrator -
Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.
Maybe you are looking for
-
How do I set up an Apple TV with a corporate network?
Hi all, I am aware that there are a lot of resources around that explain how to create a Configuration Profile for connecting an Apple TV to a corporate wireless network, and I think I understand them. But the issue I am struggling with is how to get
-
PHP Email form, need help...
Heya, I have a flash form that uses PHP to send the data to an email, but it causes all of the data to display on the same line with no spaces when recieved via email, can anyone help? Thanks! Code: <?php $sendTo = "[email protected]"; $subject = "Co
-
Cisco MeetingPlace One or More Local Admin Group
Hi All UC Experts, I have a MeetingPlace 8.5 audio only, that is using in Hong Kong only. Now I want to share the MeetingPlace to my USA users to use too. But I am thinking the administrative problem as below: Can I create a USA local group for the U
-
LoginModule with JAAS, setup question for Frank Nimphius
Hi Frank, i am trying to use a custom LoginModule in conjuction with the setup procedure in your "J2EE Security in Oracle ADF Web Applications" white paper. Have you done this before? can you provide roadmap for additional/alternate setup steps neede
-
Firefox is not saving my preferences.
I read in Mozilla's knowledge base to check the pref.js file to make sure it wasn't a read only file. I did that and it is not a read only file. In addition, I have pref files 1 through 88. i.e. prefs-1, prefs-2 ..........prefs-88. Is this suppose to