Need some permanent unlock suggestion for iphone 4s with Roger carrier
i bought my Iphone 4s from canada having Roger carrier now i want to use in india with BSNL carrier for that i want to permanent unlock my iphone could you please provide some suggestion for this or is there any secure website for permanent unlocking
Seriously? You've used Rogers as your carrier, but don't know how to contact them? Start here:
http://www.rogers.com/web/support/supportwireless
Similar Messages
-
Help need some info on repairs for iphone 3G
I dropped my iphone tonight due to a faulty case that will not stay clipped on. I noticed my on/off switch for my ringer no longer works. Has anyone had this problem and if so have you sent it in to be repaired? What's the cost of repair and how long does it take? I do not have the Apple Protection Plan but I purchased the phone in September so it falls under the 1 year warranty. So help I'm trying to figure out what to do with it.
Thanks!!!!I was just searching around for a repair shop myself. If the warranty doesn't cover it, you might want to check these guys. They looked promising, and they actually answered my phone call and were honest about my chances of phone repair (in my case, it wasn't worth the money/effort):
http://www.ipodjuice.com/apple-iphone-repair.htm#iphone-repair
Good luck.
-b -
Emergency Numbers - suggestion for iPhone engineers
I can't find a forum to make suggestions for iPhone improvements - this seems the best choice - hopefully Apple engineers browse this too.
When the iPhone is locked and password protection is on (required by some companies who allow corporate mail to be received on the iPhone), no one can get to the Contacts list on the phone. I would strongly suggest that Apple has an icon for an "Emergency" phone number that can be dialled without having to enter a password.
I believe that emergency personnel look for an "ICE" (In Case of Emergency) phone number to call if the bearer of the phone is incapacitated. If the phone is locked this can't be done.
Hence, it makes sense to have an ICON that allows an emergency phone number to be on the screen where the user types in the password. In case of an emergency, someone can move the slider to the right and unlock the phone. However, since they don't know the password, they can tap this new Emergency Icon to call some number.
If the iPhone is lost and falls into the hands of someone honest, then this is also a way for that person to contact the Emergency Number to return the iPhone to its rightful owner.You can call "any" number - true.
However, if there is an accident what an emergency personnel needs to do is to call a person like a spouse or a parent. These numbers are in the Contacts list, but the contact list is not visible until you enter a passcode.
So what I am suggesting is that Apple allows an "Call in case of Emergency" button that can be programmed by the user to contain a phone number. Now, this number can be called without having to enter a passcode.
Thanks for the link .. -
DO i need some extra hardware interface for receving both Audio and video
hi i m doing e-learning project. i have to capture video from webcam and voice from headphone and send to client.
but my code is working fine for either one at a time.
DO i need some extra hardware interface for receving both Audio and video. im using code AVTransmit and AVReceive found from this site only
After running TX
i give Dsound:// & vfw://0 in Media Locater only sound is received and no vedio
and when i give vfw://0 in Media Locater only live video is transmited.
im using JMF1.1.2e.
if any one know the method to run or cause of it plz reply me soon. i will be very thankfull
transmiter/server side code .first run TX on server
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import java.net.*;
import java.util.*;
import javax.media.rtp.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.border.*;
public class Tx extends JFrame implements ActionListener, KeyListener,
MouseListener, WindowListener {
Vector targets;
JList list;
JButton startXmit;
JButton rtcp;
JButton update;
JButton expiration;
JButton statistics;
JButton addTarget;
JButton removeTarget;
JTextField tf_remote_address;
JTextField tf_remote_data_port;
JTextField tf_media_file;
JTextField tf_data_port;
TargetListModel listModel;
AVTransmitter avTransmitter;
RTCPViewer rtcpViewer;
JCheckBox cb_loop;
Config config;
public Tx() {
setTitle( "JMF/RTP Transmitter");
config= new Config();
GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
JPanel p= new JPanel();
p.setLayout( gridBagLayout);
JPanel localPanel= createLocalPanel();
gbc= new GridBagConstraints();
gbc.gridx= 0;
gbc.gridy= 0;
gbc.gridwidth= 2;
gbc.anchor= GridBagConstraints.CENTER;
gbc.fill= GridBagConstraints.BOTH;
gbc.insets= new Insets( 10, 5, 0, 0);
((GridBagLayout)p.getLayout()).setConstraints( localPanel, gbc);
p.add( localPanel);
JPanel targetPanel= createTargetPanel();
gbc= new GridBagConstraints();
gbc.gridx= 1;
gbc.gridy= 1;
gbc.weightx= 1.0;
gbc.weighty= 1.0;
gbc.anchor= GridBagConstraints.CENTER;
gbc.fill= GridBagConstraints.BOTH;
gbc.insets= new Insets( 10, 5, 0, 0);
((GridBagLayout)p.getLayout()).setConstraints( targetPanel, gbc);
p.add( targetPanel);
JPanel mediaPanel= createMediaPanel();
gbc= new GridBagConstraints();
gbc.gridx= 1;
gbc.gridy= 2;
gbc.weightx= 1.0;
gbc.weighty= 1.0;
gbc.anchor= GridBagConstraints.CENTER;
gbc.fill= GridBagConstraints.BOTH;
gbc.insets= new Insets( 10, 5, 0, 0);
((GridBagLayout)p.getLayout()).setConstraints( mediaPanel, gbc);
p.add( mediaPanel);
JPanel buttonPanel= new JPanel();
rtcp= new JButton( "RTCP Monitor");
update= new JButton( "Transmission Status");
update.setEnabled( false);
rtcp.addActionListener( this);
update.addActionListener( this);
buttonPanel.add( rtcp);
buttonPanel.add( update);
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 3;
gbc.gridwidth= 2;
gbc.weightx = 1.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.CENTER;
gbc.fill = GridBagConstraints.HORIZONTAL;
gbc.insets = new Insets( 5,5,10,5);
((GridBagLayout)p.getLayout()).setConstraints( buttonPanel, gbc);
p.add( buttonPanel);
getContentPane().add( p);
list.addMouseListener( this);
addWindowListener( this);
pack();
setVisible( true);
private JPanel createMediaPanel() {
JPanel p= new JPanel();
GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
p.setLayout( gridBagLayout);
JLabel label= new JLabel( "Media Locator:");
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 0;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.EAST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,10,5);
((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
p.add( label);
tf_media_file= new JTextField( 35);
gbc= new GridBagConstraints();
gbc.gridx = 1;
gbc.gridy = 0;
gbc.weightx = 1.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.WEST;
gbc.fill = GridBagConstraints.HORIZONTAL;
gbc.insets = new Insets( 5,5,10,5);
((GridBagLayout)p.getLayout()).setConstraints( tf_media_file, gbc);
p.add( tf_media_file);
tf_media_file.setText( config.media_locator);
cb_loop= new JCheckBox( "loop");
startXmit= new JButton( "Start Transmission");
startXmit.setEnabled( true);
startXmit.addActionListener( this);
gbc= new GridBagConstraints();
gbc.gridx = 2;
gbc.gridy = 0;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.WEST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,10,5);
((GridBagLayout)p.getLayout()).setConstraints( cb_loop, gbc);
p.add( cb_loop);
cb_loop.setSelected( true);
cb_loop.addActionListener( this);
gbc= new GridBagConstraints();
gbc.gridx = 1;
gbc.gridy = 1;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.CENTER;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,10,5);
((GridBagLayout)p.getLayout()).setConstraints( startXmit, gbc);
p.add( startXmit);
TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Source");
p.setBorder( titledBorder);
return p;
private JPanel createTargetPanel() {
JPanel p= new JPanel();
GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
p.setLayout( gridBagLayout);
targets= new Vector();
for( int i= 0; i < config.targets.size(); i++) {
targets.addElement( config.targets.elementAt( i));
listModel= new TargetListModel( targets);
list= new JList( listModel);
list.addKeyListener( this);
list.setPrototypeCellValue( "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx");
JScrollPane scrollPane= new JScrollPane( list,
ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED,
ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
gbc= new GridBagConstraints();
gbc.gridx= 0;
gbc.gridy= 0;
gbc.weightx= 1.0;
gbc.weighty= 1.0;
gbc.anchor= GridBagConstraints.CENTER;
gbc.fill= GridBagConstraints.BOTH;
gbc.insets= new Insets( 10, 5, 0, 0);
((GridBagLayout)p.getLayout()).setConstraints( scrollPane, gbc);
p.add( scrollPane);
JPanel p1= new JPanel();
p1.setLayout( gridBagLayout);
JLabel label= new JLabel( "IP Address:");
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 0;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.EAST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
p1.add( label);
tf_remote_address= new JTextField( 15);
gbc= new GridBagConstraints();
gbc.gridx = 1;
gbc.gridy = 0;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.WEST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_address, gbc);
p1.add( tf_remote_address);
label= new JLabel( "Data Port:");
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 1;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.EAST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
p1.add( label);
tf_remote_data_port= new JTextField( 15);
gbc= new GridBagConstraints();
gbc.gridx = 1;
gbc.gridy = 1;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.WEST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_data_port, gbc);
p1.add( tf_remote_data_port);
JPanel p2= new JPanel();
addTarget= new JButton( "Add Target");
removeTarget= new JButton( "Remove Target");
p2.add( addTarget);
p2.add( removeTarget);
addTarget.addActionListener( this);
removeTarget.addActionListener( this);
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 2;
gbc.weightx = 1.0;
gbc.weighty = 0.0;
gbc.gridwidth= 2;
gbc.anchor = GridBagConstraints.CENTER;
gbc.fill = GridBagConstraints.HORIZONTAL;
gbc.insets = new Insets( 20,5,0,5);
((GridBagLayout)p1.getLayout()).setConstraints( p2, gbc);
p1.add( p2);
gbc= new GridBagConstraints();
gbc.gridx= 1;
gbc.gridy= 0;
gbc.weightx= 1.0;
gbc.weighty= 1.0;
gbc.anchor= GridBagConstraints.CENTER;
gbc.fill= GridBagConstraints.BOTH;
gbc.insets= new Insets( 10, 5, 0, 0);
((GridBagLayout)p.getLayout()).setConstraints( p1, gbc);
p.add( p1);
TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Targets");
p.setBorder( titledBorder);
return p;
private JPanel createLocalPanel() {
JPanel p= new JPanel();
GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
p.setLayout( gridBagLayout);
JLabel label= new JLabel( "IP Address:");
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 0;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.EAST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
p.add( label);
JTextField tf_local_host= new JTextField( 15);
gbc= new GridBagConstraints();
gbc.gridx = 1;
gbc.gridy = 0;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.WEST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p.getLayout()).setConstraints( tf_local_host, gbc);
p.add( tf_local_host);
try {
String host= InetAddress.getLocalHost().getHostAddress();
tf_local_host.setText( host);
} catch( UnknownHostException e) {
label= new JLabel( "Data Port:");
gbc= new GridBagConstraints();
gbc.gridx = 0;
gbc.gridy = 1;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.EAST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,0,5);
((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
p.add( label);
tf_data_port= new JTextField( 15);
gbc= new GridBagConstraints();
gbc.gridx = 1;
gbc.gridy = 1;
gbc.weightx = 0.0;
gbc.weighty = 0.0;
gbc.anchor = GridBagConstraints.WEST;
gbc.fill = GridBagConstraints.NONE;
gbc.insets = new Insets( 5,5,10,5);
((GridBagLayout)p.getLayout()).setConstraints( tf_data_port, gbc);
p.add( tf_data_port);
tf_data_port.setText( config.local_data_port);
TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Local Host");
p.setBorder( titledBorder);
return p;
public void actionPerformed( ActionEvent event) {
Object source= event.getSource();
if( source == addTarget) {
String ip= tf_remote_address.getText().trim();
String port= tf_remote_data_port.getText().trim();
String localPort= tf_data_port.getText().trim();
addTargetToList( localPort, ip, port);
if( avTransmitter != null) {
avTransmitter.addTarget( ip, port);
} else if( source == removeTarget) {
int index= list.getSelectedIndex();
if( index != -1) {
Target target= (Target) targets.elementAt( index);
if( avTransmitter != null) {
avTransmitter.removeTarget( target.ip, target.port);
targets.removeElement( target);
listModel.setData( targets);
} else if( source == startXmit) {
if( startXmit.getLabel().equals( "Start Transmission")) {
int data_port= new Integer( tf_data_port.getText()).intValue();
avTransmitter= new AVTransmitter( this, data_port);
avTransmitter.start( tf_media_file.getText().trim(), targets);
avTransmitter.setLooping( cb_loop.isSelected());
startXmit.setLabel( "Stop Transmission");
} else if( startXmit.getLabel().equals( "Stop Transmission")) {
avTransmitter.stop();
avTransmitter= null;
removeNonBaseTargets();
listModel.setData( targets);
startXmit.setLabel( "Start Transmission");
} else if( source == rtcp) {
if( rtcpViewer == null) {
rtcpViewer= new RTCPViewer();
} else {
rtcpViewer.setVisible( true);
rtcpViewer.toFront();
} else if( source == cb_loop) {
if( avTransmitter != null) {
avTransmitter.setLooping( cb_loop.isSelected());
private void removeNonBaseTargets() {
String localPort= tf_data_port.getText().trim();
for( int i= targets.size(); i > 0;) {
Target target= (Target) targets.elementAt( i - 1);
if( !target.localPort.equals( localPort)) {
targets.removeElement( target);
i--;
public void addTargetToList( String localPort,
String ip, String port) {
ListUpdater listUpdater= new ListUpdater( localPort, ip,
port, listModel, targets);
SwingUtilities.invokeLater( listUpdater);
public void rtcpReport( String report) {
if( rtcpViewer != null) {
rtcpViewer.report( report);
public void windowClosing( WindowEvent event) {
config.local_data_port= tf_data_port.getText().trim();
config.targets= new Vector();
for( int i= 0; i < targets.size(); i++) {
Target target= (Target) targets.elementAt( i);
if( target.localPort.equals( config.local_data_port)) {
config.addTarget( target.ip, target.port);
config.media_locator= tf_media_file.getText().trim();
config.write();
System.exit( 0);
public void windowClosed( WindowEvent event) {
public void windowDeiconified( WindowEvent event) {
public void windowIconified( WindowEvent event) {
public void windowActivated( WindowEvent event) {
public void windowDeactivated( WindowEvent event) {
public void windowOpened( WindowEvent event) {
public void keyPressed( KeyEvent event) {
public void keyReleased( KeyEvent event) {
Object source= event.getSource();
if( source == list) {
int index= list.getSelectedIndex();
public void keyTyped( KeyEvent event) {
public void mousePressed( MouseEvent e) {
public void mouseReleased( MouseEvent e) {
public void mouseEntered( MouseEvent e) {
public void mouseExited( MouseEvent e) {
public void mouseClicked( MouseEvent e) {
Object source= e.getSource();
if( source == list) {
int index= list.getSelectedIndex();
if( index != -1) {
Target target= (Target) targets.elementAt( index);
tf_remote_address.setText( target.ip);
tf_remote_data_port.setText( target.port);
int index= list.locationToIndex( e.getPoint());
public static void main( String[] args) {
new Tx();
class TargetListModel extends AbstractListModel {
private Vector options;
public TargetListModel( Vector options) {
this.options= options;
public int getSize() {
int size;
if( options == null) {
size= 0;
} else {
size= options.size();
return size;
public Object getElementAt( int index) {
String name;
if( index < getSize()) {
Target o= (Target)options.elementAt( index);
name= o.localPort + " ---> " + o.ip + ":" + o.port;
} else {
name= null;
return name;
public void setData( Vector data) {
options= data;
fireContentsChanged( this, 0, data.size());
class ListUpdater implements Runnable {
String localPort, ip, port;
TargetListModel listModel;
Vector targets;
public ListUpdater( String localPort, String ip, String port,
TargetListModel listModel, Vector targets) {
this.localPort= localPort;
this.ip= ip;
this.port= port;
this.listModel= listModel;
this.targets= targets;
public void run() {
Target target= new Target( localPort, ip, port);
if( !targetExists( localPort, ip, port)) {
targets.addElement( target);
listModel.setData( targets);
public boolean targetExists( String localPort, String ip, String port) {
boolean exists= false;
for( int i= 0; i < targets.size(); i++) {
Target target= (Target) targets.elementAt( i);
if( target.localPort.equals( localPort)
&& target.ip.equals( ip)
&& target.port.equals( port)) {
exists= true;
break;
return exists;
>>>>>>>>>>>>>>>>>
import java.awt.*;
import java.io.*;
import java.net.InetAddress;
import java.util.*;
import javax.media.*;
import javax.media.protocol.*;
import javax.media.format.*;
import javax.media.control.TrackControl;
import javax.media.control.QualityControl;
import javax.media.rtp.*;
import javax.media.rtp.event.*;
import javax.media.rtp.rtcp.*;
public class AVTransmitter implements ReceiveStreamListener, RemoteListener,
ControllerListener {
// Input MediaLocator
// Can be a file or http or capture source
private MediaLocator locator;
private String ipAddress;
private int portBase;
private Processor processor = null;
private RTPManager rtpMgrs[];
private int localPorts[];
private DataSource dataOutput = null;
private int local_data_port;
private Tx tx;
public AVTransmitter( Tx tx, int data_port) {
this.tx= tx;
local_data_port= data_port;
* Starts the transmission. Returns null if transmission started ok.
* Otherwise it returns a string with the reason why the setup failed.
public synchronized String start( String filename, Vector targets) {
String result;
locator= new MediaLocator( filename);
// Create a processor for the specified media locator
// and program it to output JPEG/RTP
result = createProcessor();
if (result != null) {
return result;
// Create an RTP session to transmit the output of the
// processor to the specified IP address and port no.
result = createTransmitter( targets);
if (result != null) {
processor.close();
processor = null;
return result;
// Start the transmission
processor.start();
return null;
* Use the RTPManager API to create sessions for each media
* track of the processor.
private String createTransmitter( Vector targets) {
// Cheated. Should have checked the type.
PushBufferDataSource pbds = (PushBufferDataSource)dataOutput;
PushBufferStream pbss[] = pbds.getStreams();
rtpMgrs = new RTPManager[pbss.length];
localPorts = new int[ pbss.length];
SessionAddress localAddr, destAddr;
InetAddress ipAddr;
SendStream sendStream;
int port;
SourceDescription srcDesList[];
for (int i = 0; i < pbss.length; i++) {
// for (int i = 0; i < 1; i++) {
try {
rtpMgrs[i] = RTPManager.newInstance();
port = local_data_port + 2*i;
localPorts[ i]= port;
localAddr = new SessionAddress( InetAddress.getLocalHost(),
port);
rtpMgrs.initialize( localAddr);
rtpMgrs[i].addReceiveStreamListener(this);
rtpMgrs[i].addRemoteListener(this);
for( int k= 0; k < targets.size(); k++) {
Target target= (Target) targets.elementAt( k);
int targetPort= new Integer( target.port).intValue();
addTarget( localPorts[ i], rtpMgrs[ i], target.ip, targetPort + 2*i);
sendStream = rtpMgrs[i].createSendStream(dataOutput, i);
sendStream.start();
} catch (Exception e) {
e.printStackTrace();
return e.getMessage();
return null;
public void addTarget( String ip, String port) {
for (int i= 0; i < rtpMgrs.length; i++) {
int targetPort= new Integer( port).intValue();
addTarget( localPorts[ i], rtpMgrs[ i], ip, targetPort + 2*i);
public void addTarget( int localPort, RTPManager mgr, String ip, int port) {
try {
SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
new Integer( port).intValue());
mgr.addTarget( addr);
tx.addTargetToList( localPort + "", ip, port + "");
} catch( Exception e) {
e.printStackTrace();
public void removeTarget( String ip, String port) {
try {
SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
new Integer( port).intValue());
for (int i= 0; i < rtpMgrs.length; i++) {
rtpMgrs[ i].removeTarget( addr, "target removed from transmitter.");
} catch( Exception e) {
e.printStackTrace();
boolean looping= true;
public void controllerUpdate( ControllerEvent ce) {
System.out.println( ce);
if( ce instanceof DurationUpdateEvent) {
Time duration= ((DurationUpdateEvent) ce).getDuration();
System.out.println( "duration: " + duration.getSeconds());
} else if( ce instanceof EndOfMediaEvent) {
System.out.println( "END OF MEDIA - looping=" + looping);
if( looping) {
processor.setMediaTime( new Time( 0));
processor.start();
public void setLooping( boolean flag) {
looping= flag;
public void update( ReceiveStreamEvent event) {
String timestamp= getTimestamp();
StringBuffer sb= new StringBuffer();
if( event instanceof InactiveReceiveStreamEvent) {
sb.append( timestamp + " Inactive Receive Stream");
} else if( event instanceof ByeEvent) {
sb.append( timestamp + " Bye");
} else {
System.out.println( "ReceiveStreamEvent: "+ event);
tx.rtcpReport( sb.toString());
public void update( RemoteEvent event) {
String timestamp= getTimestamp();
if( event instanceof ReceiverReportEvent) {
ReceiverReport rr= ((ReceiverReportEvent) event).getReport();
StringBuffer sb= new StringBuffer();
sb.append( timestamp + " RR");
if( rr != null) {
Participant participant= rr.getParticipant();
if( participant != null) {
sb.append( " from " + participant.getCNAME());
sb.append( " ssrc=" + rr.getSSRC());
} else {
sb.append( " ssrc=" + rr.getSSRC());
tx.rtcpReport( sb.toString());
} else {
System.out.println( "RemoteEvent: " + event);
private String getTimestamp() {
String timestamp;
Calendar calendar= Calendar.getInstance();
int hour= calendar.get( Calendar.HOUR_OF_DAY);
String hourStr= formatTime( hour);
int minute= calendar.get( Calendar.MINUTE);
String minuteStr= formatTime( minute);
int second= calendar.get( Calendar.SECOND);
String secondStr= formatTime( second);
timestamp= hourStr + ":" + minuteStr + ":" + secondStr;
return timestamp;
private String formatTime( int time) {
String timeStr;
if( time < 10) {
timeStr= "0" + time;
} else {
timeStr= "" + time;
return timeStr;
* Stops the transmission if already started
public void stop() {
synchronized (this) {
if (processor != null) {
processor.stop();
processor.close();
processor = null;
for (int i= 0; i < rtpMgrs.length; i++) {
rtpMgrs[ i].removeTargets( "Session ended.");
rtpMgrs[ i].dispose();
public String createProcessor() {
if (locator == null) {
return "Locator is null";
DataSource ds;
DataSource clone;
try {
ds = javax.media.Manager.createDataSource(locator);
} catch (Exception e) {
return "Couldn't create DataSource";
// Try to create a processor to handle the input media locator
try {
processor = javax.media.Manager.createProcessor(ds);
processor.addControllerListener( this);
} catch (NoProcessorException npe) {
return "Couldn't create processor";
} catch (IOException ioe) {
return "IOException creating processor";
// Wait for it to configure
boolean result = waitForState(processor, Processor.Configured);
if (result == false)
return "Couldn't configure processor";
// Get the tracks from the processor
TrackControl [] tracks = processor.getTrackControls();
// Do we have atleast one track?
if (tracks == null || tracks.length < 1)
return "Couldn't find tracks in processor";
// Set the output content descriptor to RAW_RTP
// This will limit the supported formats reported from
// Track.getSupportedFormats to only valid RTP formats.
ContentDescriptor cd = new ContentDescriptor(ContentDescriptor.RAW_RTP);
processor.setContentDescriptor(cd);
Format supported[];
Format chosen;
boolean atLeastOneTrack = false;
// Program the tracks.
for (int i = 0; i < tracks.length; i++) {
Format format = tracks[i].getFormat();
if (tracks[i].isEnabled()) {
supported = tracks[i].getSupportedFormats();
// We've set the output content to the RAW_RTP.
// So all the supported formats should work with RTP.
// We'll just pick the first one.
if (supported.length > 0) {
if (supported[0] instanceof VideoFormat) {
// For video formats, we should double check the
// sizes since not all formats work in all sizes.
chosen = checkForVideoSizes(tracks[i].getFormat(),
supported[0]);
} else
chosen = supported[0];
tracks[i].setFormat(chosen);
System.err.println("Track " + i + " is set to transmit as:");
System.err.println(" " + chosen);
atLeastOneTrack = true;
} else
tracks[i].setEnabled(false);
} else
tracks[i].setEnabled(false);
if (!atLeastOneTrack)
return "Couldn't set any of the tracks to a valid RTP format";
// Realize the processor. This will internally create a flow
// graph and attempt to create an output datasource for JPEG/RTP
// audio frames.
result = waitForState(processor, Controller.Realized);
if (result == false)
return "Couldn't realize processor";
// Set the JPEG quality to .5.
setJPEGQuality(processor, 0.5f);
// Get the output data source of the processor
dataOutput = processor.getDataOutput();
return null;
static SessionAddress destAddr1, destAddr2;
* For JPEG and H263, we know that they only work for particular
* sizes. So we'll perform extra checking here to make sure they
* are of the right sizes.
Format checkForVideoSizes(Format original, Format supported) {
int width, height;
Dimension size = ((VideoFormat)original).getSize();
Format jpegFmt = new Format(VideoFormat.JPEG_RTP);
Format h263Fmt = new Format(VideoFormat.H263_RTP);
if (supported.matches(jpegFmt)) {
// For JPEG, make sure width and height are divisible by 8.
width = (size.width % 8 == 0 ? size.width :
(int)(size.width / 8) * 8);
height = (size.height % 8 == 0 ? size.height :
(int)(size.height / 8) * 8);
} else if (supported.matches(h263Fmt)) {
// For H.263, we only support some specific sizes.
if (size.width < 128) {
width = 128;
height = 96;
} else if (size.width < 176) {
width = 176;
height = 144;
} else {
width = 352;
height = 288;
} else {
// We don't know this particular format. We'll just
// leave it alone then.
return supported;
return (new VideoFormat(null,
new Dimension(width, height),
Format.NOT_SPECIFIED,
null,
Format.NOT_SPECIFIED)).intersects(supported);
* Setting the encoding quality to the specified value on the JPEG encoder.
* 0.5 is a good default.
void setJPEGQuality(Player p, float val) {
Control cs[] = p.getControls();
QualityControl qc = null;
VideoFormat jpegFmt = new VideoFormat(VideoFormat.JPEG);
// Loop through the controls to find the Quality control for
// the JPEG encoder.
for (int i = 0; i < cs.length; i++) {
if (cs[i] instanceof QualityControl &&
cs[i] instanceof Owned) {
Object owner = ((Owned)cs[i]).getOwner();
// Check to see if the owner is a Codec.
// Then check for the output format.
if (owner instanceof Codec) {
Format fmts[] = ((Codec)owner).getSupportedOutputFormats(null);
for (int j = 0; j < fmts.length; j++) {
if (fmts[j].matches(jpegFmt)) {
qc = (QualityControl)cs[i];
qc.setQuality(val);
System.err.println("- Setting quality to " +
val + " on " + qc);
break;
if (qc != null)
break;
* Convenience methods to handle processor's state changes.
private Integer stateLock = new Integer(0);
private boolean failed = false;
Integer getStateLock() {
return stateLock;
void setFailed() {
failed = true;
private synchronized boolean waitForState(Processor p, int state) {
p.addControllerListener(new StateListener());
failed = false;
// Call the required method on the processor
if (state == Processor.Configured) {
p.configure();
} else if (state == Processor.Realized) {
p.realize();
// Wait until we get an event that confirms the
// success of the method, or a failure event.
// See StateListener inner class
while (p.getState() < state && !failed) {
synchronized (getStateLock()) {
try {
getStateLock().wait();
} catch (InterruptedException ie) {
return false;
if (failed)
return false;
else
return true;
* Inner Classes
class StateListener implements ControllerListener {
public void controllerUpdate(ControllerEvent ce) {
// If there was an error during configure or
// realizI do this all the time, I put my MBP to a 60 inch Sharp. If you have the video working do the simple thing first. Check to make sure your sound is on your TV and Mac. Then if that doesn't work go to System Prefrences and under sound go to a tab called Output and see if your TV is listed and if it is change it to that setting
Hope It Works -
Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Thoughts???
thought that it was possible to have the same iTunes library on any machine that was authorised, a kind of cloud-iTunes I guess.
That would convenient, but sadly it is not the case. Sorry!
Either way your welcome and best of luck!
B-rock -
HT201269 how do u request an unlock code for iphone 4s
how do u request an unlock code for iphone 4s
Call the carrier. They are the only ones who can unlock and will give you instructions.
-
Any suggestions for iPhone 4 that got wet in the washer and will not turn on?
Any suggestions for iPhone 4 that got wet in the washer and will not turn on?
davga wrote:
Any suggestions for iPhone 4 that got wet in the washer and will not turn on?
Get a new phone, either by buying the latest model or getting an OOW replacement and you will receive one like the one you have now. -
I need some Important Trigger Programs for Objects
I need some Important Trigger Programs for Objects.
If the program includes the V-array appln, that would be better to.There are some drawbacks, running Windows 7 (only) on a Mac via Bootcamp yields less than stellar results, especially with the Retina display.
And of your traveling, the Mac's high power needs (especially the Retina display) and lack of removable battery are going to be a serious issue. The Retina display is glossy, not ideal for viewing on the road and in varied environments.
CS4 won't run on the OS X version that comes with a Mac, so your looking at purchasing CS6.
Support for Windows is more widespread than for Mac's, also if you ever need to redownload OS X to fix a issue, requires a fast reliable Internet connection of the broadband kind.
If your running Windows on your Mac, you can expect to be on your own and not get support as easily as if you were running it on a regular PC.
If you can't afford to keep up with CS upgrades, then you shouldn't be considering a Mac because there are more paid upgrades on that than on Windows 7, it's like a annual nightmare.
IMMO your still better off on a decent, 1920 x 1080 res, matte screen, removable battery (with extras), Win 7 Pro i7 machine (Pro+ runs XP programs) which will stay like it is and get security updates until 2020.
OS X changes every year and if you don't upgrade, + all your third party software, then about 3 years later your left behind for updates.
Also you will have to buy Win 7 to run on your Mac, the OEM disks won't work.
If your trying to budget, then a Mac is certainly not for you. -
Looking for a good antivirus/antimalware app for iPhone 5 with iOS 8.1.2
As the subject implies, I'm Looking for a good antivirus/antimalware app for iPhone 5 with iOS 8.1.2. Don't care if it costs $$ just want something that works. I've been searching around and installed a couple things but they don't seem to be what I was expecting. Thought I'd find out what others are using.
Htown Rush wrote:
Thanks, the problem is I'm getting spam (spoofing) that is from me saying it was sent from my iPhone with my iPhone signature. Ive reset my password on my mail, but that's pretty sketchy either way. And it's being sent to my contacts as well. Trying to eliminate all the possibilities and this is my first iPhone so I'm still a noob.
Sadly, spoofing doesn't really require much hacking, All a spammer would need to use your email address for spoofing would be your email address. If it's also being sent to your contacts, your email account may well have been hacked. But that would have happened on the server level. Your phone wouldn't have been involved. Unfortunately, once the miscreants have your contact list, changing your password will not get that back. Changing the password to something strong may help prevent future misuse.
Best of luck. -
Can I use my sprint iPhone 4S with another carrier if it's unlocked
Can I use my sprint iPhone 4S with another carrier if it's unlocked. Sprint will only unlock it if it's international. they will not unlock it if I want to use the iphone4s with another USA carrier. Why? I have paid for the phone and don't have a contract. I wanted to switch the SIM card and use tmobile or another provider because I am very dissatisfied with sprint service. Lots of drop calls and texting takes 15 to reach the other person. It is horrible,,,, I hate sprint!,
Sorry, what others here have said is wrong, wrong, wrong. There is nothing about the hardware of the iPhone 4S that would prevent a Sprint 4S from being used on T-Mobile, or any GSM carrier, international or domestic. Nothing. Zero. Zip. Zilch. Nada. Each and every 4S is 100% hardware capable of doing both GSM and CDMA out of the box. The only impediment is that Sprint would have to authorize an unlock for you. This is something they simply refuse to do. If anyone at Sprint has told you that they can't unlock a 4S for domestic use with another carrier, they have lied to your face. This, by the way, is something they're doing with everyone who asks the question - just Google search "Sprint unlock iPhone 4S", and you'll see dozens of internet threads where people talk about being lied to by Sprint about this issue. The good news is that Sprint signed an agreement with the FCC regarding letting off-contract customers unlock their phones. The agreement takes effect in mid-March, and Sprint is dragging its feet until then. Once that deadline passes, if Sprint still hasn't agreed to unlock your phone, then they're in violation of the agreement, and you can and should report them to the FCC. I sure plan to. Then I'm going to switch carriers, to one that doesn't lie to me and keep fraudulent liens on my property.
-
Launch image for iPhone 5 with Flash CS6
How do I add the required iPhone 5, 4 inch screen launch images to my build using Flash CS6. I have targeted Air 3.8 beta and there is no support for bundling the necessary images. Do I need to edit the plist or app descriptor xml file or something? Do Adobe plan to accommodate these new Apple requirments in a future version of CS6 or AIR SDK?
Up until now I have had no problems submitting binaries to the Appstore, but as of May 1st Apple reject any binaries that are not optimized for the 4 inch screen of the iPhone 5.
Thanks.Hi,
Thanks for your effort!!!Did exactly the same, but no result.I changed the version number in Flash in the airsettings to 2.1, and also tried (1.1, 2.1. 1.0.1)After that, put another version ready to upload. Select this version in the apploader.And than it tells me: This bundle is invalid. The value for key cfkbunleversion in the info.plist file must contain a higher version than that of the previously uploaded version.
I do not want to update my app, but only the screens you see when buying the app in de store.And also the name of the developer. I changed my apple id from [email protected] into [email protected] thought if I run an update, the apple-id of the app will change.
(I am not sure).
Hope to hear from you.
Newspaper want a interview because it's a creative app from the city, now I hope it will work in time...App name is: jabenjibbe
Kind regards,Christa.
Date: Sun, 4 Aug 2013 20:56:45 -0700
From: [email protected]
To: [email protected]
Subject: Launch image for iPhone 5 with Flash CS6
Re: Launch image for iPhone 5 with Flash CS6
created by gdfsdrghdhdfhrthfghgfhgth in Flash Pro CC - General - View the full discussion
Hey Christa,
I'm not entirely sure what process you've gone through, but as far as uploading an update goes, it's much like uploading your original app. You need to go to iTunes Connect first and log in, go to "Manage Your Apps" and then click on the app you want to upload an update for. There'll be an option on the next page that says "Add a version". You then enter the information that you need to for the updated app and click on "Save". You'll then have the button you need to click on that says something like "Ready to Upload Binary" or something similar.
Once you click on that, you need to open up Application Loader and then upload your updated app through that. If you've entered the correct information in the steps above, you should be able to choose the new version number for your app from a list. You then just submit it like you did originally.
After that, you simply have to wait. It's not instantaneous. Submitting an update is much the same as when you submit an app for the first time. It has to go through the whole review and approval process all over again. So when you go back to iTunes Connect, you'll see for the app you've updated, there'll be a green light for the older version that's approved and currently on the App Store and an orange light for the update that's waiting approval. Once the update has been successful, it will automatically replace the older version (if you chose that option earlier) and then you will only have the one green light, for the most recent version, on iTunes Connect and then people who have downloaded the app previously will get the Update alert in the App Store on their phone/device letting them know that there are updates available.
For me, the update process was reasonably quick. It took anywhere between 3 and 5 days before the update became active on the App Store. Hope this helps.
Cheers,
Hally
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5566190#5566190
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5566190#5566190
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5566190#5566190. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Flash Pro CC - General by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx Plz guys anyone can help plzz....I've lost all contact and I dont even have any secondary back up also...!!!
If you've had it for less than a year, then it's still under warranty. Take it to an Apple store or an authorized service facility. See http://support.apple.com/kb/HT1434
-
I've bought leather case for iPhone 4 with a magnet clip situated on the back side just above the "apple" label. Can it interfere with any signals or made other damage?
I have been using a leather case with a magnetic clasp for months. The only side effect is that I need to recalibrate the compass app when I use it. This is really not a problem since I don't use the compass app very often. I haven't encountered any other interference or problems.
-
I just bought a newer Nano and I need to upgrade my itunes for a laptop (with Windows) that no longer has the capability to go online. Is there a way to do this?
Hi John,
Thanks for your response, but if you read my first mail, it's the original serial number that I don't have. I bought the original LR as download and have misplaced the serial number. Is there any way to find it???
Linda -
Can applw make a new software for Iphone 3g with multitasking
can apple make a new software for Iphone 3g with multitasking
No. Apple stated that the 3G does not have the processing power to provide multitasking to Apple's reuired standards.
Maybe you are looking for
-
Photoshop CS2 and Windows Vista 64 bit
I have just loaded Photoshop CS2 onto my new laptop which has Windows Vista Ultimate 64 bit as its OS. All working well except I notice that,when I made adjustments to a layer (for example,using curves to colour adjust,or even just brighten midtones)
-
Do I have to purchase another program to be able to hear sound on my movies
Hi, I just got my new video ipod yesterday and I am trying to download all my old videos onto it. I downloaded the proper iTunes and transferd all my videos into there, then I tried the right click and "convert selection to ipod" button and it took 3
-
I've just updated iPhoto recently and now it's not work?? How to un upgrade?
I've just upgrade iPhoto and now cannot open iPhoto (trying revesals times but still not work), any one having same issue and can help me to fix it urgently please
-
Hi, just got a MSI GTX 980 GAMING 4G graphics card in christmas but i have been trouble on activating my xsplit :/ it gave me a 6 month free premium to it but i already had an account before it but thing is i have looked everywhere for where to activ
-
Plz give reply to me