Need step by step process for creating remote cube

Hi,
  I already have a cube from business content, getting data from an ODS, which gets data from the info source,
However we need to model a remote cube in the similar line, that is create the remote cube from the infor source above.
  I need a step by step process for creating a remore cube,
  Thanks for your help in advance,
Arunava

hi
check this link
Creating a SAP RemoteCube
Prerequisites
·        Direct access must be permitted for the DataSource (in the DataSource maintenance).
·        This DataSource from the sources system was assigned to the InfoSource.
·        You must have defined and activated the transfer rules for this combination. Note the peculiarities of transfer routines:
¡        You need to explicitly select the fields of the transfer structure that you want to use in the routine. See also Creating Transfer Routines.
¡        If you have created a transfer routine, you can create an Inversion Routine for performance optimization.
¡        If you use a formula then the selections in this field cannot be transferred. We recommend using a transfer routine instead.
·        In BW, a source system ID was created for the source system To do this choose Tools  ® Assignment of Source System to Source System ID in the main menu.
Procedure
       1.      Choose the InfoSource tree or InfoProvider tree in the Administrator Workbench under Modeling.
       2.      In the context menu, choose Create InfoCube.
       3.      Select SAP RemoteCube as InfoCube type and enter your InfoSource.
       4.      You can define if a unique source system is assigned to the InfoCube using an indicator. Otherwise you must select the source system in the relevant query. In this case the characteristic (0LOGSYS) is added to the InfoCube definition.
See also Characteristic Compounding with Source System ID.
       5.      In the next screen you can check the defined SAP RemoteCube and adjust it if necessary before activation.
       6.      You can then assign source systems to the SAP RemoteCube. To do this, choose Assign Source System from the context menu in your SAP RemoteCube. In the dialog box that follows, choose one or several source systems and select  Save Assignments.
The source system assignments are local to the system and are not transported.
Result
The SAP RemoteCube can be used in reporting in cases where it does not differ from other InfoProviders.

Similar Messages

  • Standard process for creating a new version of an existing report

    Hi All,
    We are using Siebel 8.1 with BI Publisher.
    Does any one know the standard process for creating a new version of an existing report - ie if 'BIP Report XXX' is created and works correctly from the siebel view but then an enhancement is developed, how is the enhancement deployed so that the new version completely replaces the old?
    One suggestion was:
    You can upload a new version of an existing report. You have to navigate to Administration - BIP > Report Template Registration... search for the report you need to replace (I would say that the new rtf file need to have the same name). Now you have to go to the "Template" column where there is the reference to the report file already uploaded but you don't have to click on the link that is displayed you have to click near the link in order to place the cursor on the field then you will be able to see the Multi Value Grup icon .. you click on it and you will be able to upload a new file.
    We have tested this process today, however it is not effective in replacing the old version of the report.
    After carrying out this process (including related steps from bookshelf - ie "click upload files"), we can generate the report from the relevant siebel view and the previous version of the report is still generated.
    Is there a standard process for replacing an existing report that is effective?
    Thanks.

    Hi ,
    This currently seems like a bug , we have encountered this too.
    work around is you have to delete the rtf files from server Siebel\client\temp\XMLP directory and upload them again so that they are not cached any more.
    same on dedicated client you may have to delete relavant files form siebel\client\temp\xmlp directory and upload again.
    Thanks,
    Vamsi

  • I need output type NEU automaticaly for create purchase order document type

    Dear Experts,
    I need output type NEU automaticaly for create purchase order document type NB
    when transaction code MN04, I am doing the following:
    (1) I selected the third option Purchasing Output determination: Document type
    (2) I selected the output type NEU.
    (3) In condition records in document type , i have chosen NB.
    (4) In name its automatically coming as Purchase requisition
    Please suggest how Purchase Order NB will come

    Hi,
    Check & press F4, NB Purchase Order (for catagory F) will be there after entering PO output type NEU & then maintaion the condition record in MN04.
    Output type NEU automaticaly defaulted during purchase order creation with document type ,then just fine tune the output (message) type in following path:
    SPRO--->MM->Purchasing>Message>Output control->Message types> Define message type for Purchase Order----->Fine-Tuned Control: Purchase Order
    Now here select the check box corresponding to your output(message) type NEU to have print output automatically displayed & save.
    Now try to creating Purchase Order & you will have default message type NEU.
    Regards,
    Biju K

  • Standard process for creating Services and accessing Services on EBS 11i

    All,
    Do you have any kind of documentation that explains how we should handle Services in the EBS 11i?
    We have two types of interfaces currently and no one of them uses Services:
    1. We create files in some kind of gateway
    2. We get files generated in a gateway or when it's the case we access different databases via database link.
    I really appreciate your help.
    Thanks,
    Fernando

    Right, but what would be all the standard process for creating a webservice?
    Is there any kind of document that shows in detail how to do that? and also, how we should access webservices from other systems?
    Thanks for your help.
    Fernando

  • What is the best process for creating a webi document?

    I inherited a BI 4.0 environment with published repositories, dashboards, and webi documents.
    For development purposes, I tried creating the webi document local to my machine (due to how slow it was to create the document using BILaunch pad and/or the webi rich client on the "console")
    I created it as 'standalone, pointing to a local universe'; however, I can't figure out a way to move it back into my enterprise world.
    I was able to convert and publish the local universe to my enterprise repository; however, because I created the document in standalone mode, it doesn't appear to want to let me change the data source to a universe.
    So right now .. I have a webi document that won't let me select a universe for a data source.
    Any help or proven methods for creating documents then moving them to an enterprise environment would be appreciated.
    Thanks in advance.

    I don't think Acrobat, or the Acrobat SDK can help you. Acrobat cannot be run on a server.

  • Process for Creating a weblog

    Hi All,
    I am new to SDN. Can any one tell me what is the procedure for creating a web log?

    If you click on "How to contribute" in the SDN header, you will find a "Become a weblogger"-Link on that page.

  • Help required for a Remote cube query

    Hi,
    We are working on Remote cube, which has a source from a view built on R/3 base table. I need to extract the data to BW based on a current date due to huge volume of data(performance reasons) in the table. I have used an exit on R/3 to restrict to current date but the extract checker was showing the valid data ie only for current date. When i had built a query on Remote cube, the Report was showing complete data(restriction not working). We have even tried using an inversion routine in transfer rules to pass the selections to the Source system even then it doesn't work. Could you help if you have come across same kind of situation or you can suggest an alternate solution on the same but we have to use Remote cube.
    Any suggestions asap would be highly appreciated and rewarded with full points.
    Regards,
    Raj

    I can think of two ways to do it
    Simple with no ABAP coding is a view
    Create a view between a timestamp table and your big table
    Put an entry into your timestamp table of the current date - then use a selection of this inside the view
    Unforutunately you cannot use SY fields inside database views (otherwise you could have used these as a selection condition in the view)
    The best way to do it is using a function module and passing the data from the query into the SQL statement
    I prefer to do it the last way and also pass data through a generic structure - thus you manipulate the data inside the intial loop in the function module and don;t utilise further loops downstream in transfer rules
    (to try and keep the reponse time down)

  • Data flow not visible while creating remote cube.

    Hi SDN,
    I am working on a remote cube. I need to link the infosource to remote cube. I have  selected the source system and assigned.
    I have done,  like--Remote cube --> Context Menu --> Show Data flow , and I wanted to see the source system , Info source and the remote cube, but could not find them .
    Guide me what I've missed /went wrong.
    Thanks in Advance
    Ankit

    Hi,
    Remote cube is technology where you report on data which is stored in the source system. While creating the Infocube you have to select Remote Infocube Radiobutton and in the next screen it will ask you for the infosource.
    In that infosource you can assign the datasource in the infosource menu.
    Now you see the data flow.
    Hope it works,
    Regards,
    Sasi

  • INSTALL_OLAPTRAIN FOR CREATING OLAP CUBES

    Hi all;
    I do a project and I finished Oracle dat mining part. Now, I want to apply OLAP cubes application. Firstly, I need to installation Oracle OLAP 11g Sample Schema. But I can't install olaptrain sample schema. 
    How can I create OLAP cubes by shortest?
    http://www.oracle.com/technetwork/database/enterprise-edition/readme-098894.html

    I am trying to install the olaptrain schema in a 11g 11.2.0.1.0 db. I should be able to do it, because the readme file requires DB "11g (patch 11.1.0.7 or higher)". However, I get the following error message:
    Begin installation
    +... creating tablespaces+
    +... creating OLAPTRAIN user+
    +... creating OLAPTRAIN_INSTALL directory+
    +... importing dump file into OLAPTRAIN schema.+
    Import: Release 11.2.0.1.0 - Production on Mon Aug 9 16:35:44 2010
    Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved
    Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Pr
    tion
    With the Partitioning, Oracle Label Security, OLAP, Data Mining,
    Oracle Database Vault and Real Application Testing options
    ORA-39002: invalid operation
    ORA-39070: Unable to open the log file.
    ORA-29283: invalid file operation
    ORA-06512: at "SYS.UTL_FILE", line 536
    ORA-29283: invalid file operation
    +... dropping OLAPTRAIN_INSTALL directory+
    Installation complete.
    SQL>
    I check the dm and dm_archive tablespaces, and they are both empty.
    Any help would be appreciated.
    Regards
    Juan Algaba Colera

  • Batch Process for creating button sets in Fireworks - help

    Hi,
    I'm new to Fireworks still, I've created some really simple
    buttons and I was wondering if it's possible to do a batch process
    on them to repeat a few steps e.g. changing background colour,
    border colour, text colour etc... It would save me lots of time and
    I could make some extra sets then.
    Thanks,
    Rob

    Actually Find and Replace will go through a directory as
    well.
    alex
    PJR wrote:
    > "sanchothefat" <[email protected]>
    wrote in message
    > news:ee8qm0$1pm$[email protected]..
    > | Thanks Peter!
    > |
    > | You're a real hero, nice one
    >
    > Not sure about that! I'm struggling with this.
    >
    > I would set about this in a different fashion
    >
    > I would open a canvas say 600x600 and import all your
    buttons onto the
    > canvas.
    > Organize them in a way that makes sense to you. You can
    duplicate each set
    > and alter the colours in several ways. In my example
    >
    http://www.fasterthanu.com/rob.html
    I used Adjust Colour > Levels with just
    > the backgrounds selected.
    >
    > Sorry I couldn't be more help
    >
    > Peter
    >
    >

  • Need clarification on Legal implication for creating a new plant in SAP

    Dear all,
        My customer is  having two manufacturing plant in India.
        One is DTA for domestic business and the other is EOU, 100 % Export oriented. In both plant they are manufacturing fridges.
        SAP implementation gone live on last july.
        Now they are starting Washing machine manufacturing inside the DTA plant for domestic business.  But they want to go for a new plant to be created in SAP,  they are not going to register that plant with government.
       They want that plant only for reporting purpose. I want to know will it create any leagel implecation while posting excise invoice or with Register maintanence.'
       Need your advice.
    With Regards
    R.S.Mani

    I think you were asking from SAP point of view but I would prefer to answer the practice what should be followed from manufacturer's angle.
    If you treat any place as a separate plant, the first and foremost criteria which you should look into is excise part.
    From excise point of view, you need to get concurrence from the authorities to do business with the same excise group assuming that the address is same of the existing plant.
    If address is different, then you should treat it as a separate excise group and accordingly, you need to have a separate excise group and series group and therefore, excise registers and sales tax registers will be a separate one.
    Though your question should be answered in a lengthy way, better ask the client with their range office who will be the deciding authorities.
    thanks
    G. Lakshmipathi

  • Need standard Bapi or FM for creating General Ledger (FS00 transaction)

    Hi,
    I need to upload (create) Master General Ledger data.
    My requirement is to use standard Bapi or FM for this purpose.
    Please tell me which Bapi or FM i can use for this purpose.
    Thanks in advance.

    Hi Suresh,
    The Function module you specified is not released. So, I cant use it. Thanks for your suggestion.
    Hi friends,
    My requirement is to create General Ledger Account (FS00 or FS01) using a standard Bapi or FM. Please tell me which Bapi or FM I can use for this purpose.
    I identified one related Bapi for this purpose (BAPI_ACC_GL_POSTING_POST). But my functional consultant says it is for posting General Ledger and cannot be used for ceating General Ledger account.
    Please clarify me.

  • What is the best process for creating, opening, editing, etc PDFs from within Visual Studio 2008?

    I am the project manager on a web-based application that will need to:
    Create, open, edit, save, etc PDFs from within a Visual Studio 2008 web application (Visual Basic).
    Populate PDFs from SQL server 2010 database.
    Allow users to use PDF editing tools from within the website.
    BTW, the application is being written in Visual Basic.
    Will the SDK allow us to do this? What licenses do we need to purchase?
    Are there 3rd party plugins that make doing these things much faster and simpler?
    Any input is GREATLY appreciated!!!
    Sincerely,
    Mike

    I don't think Acrobat, or the Acrobat SDK can help you. Acrobat cannot be run on a server.

  • Can we automate the process for creating Office 365 trail account

    Hello All
    I would like know is there any way to write a script to create a office365 trail account
    regards
    sriram
    Thanks Sriram

    Trial account is 30 days free account for office 365 .please find the below link
    https://portal.office.com/Signup/MainSignup15.aspx?Dap=False&QuoteId=79a957e9-ad59-4d82-b787-a46955934171&ali=1
    Thanks Sriram

  • Process for creating GL

    Hi,
    Can we create a new GL straight through FS00 or do we need to create it 1st at FSP0 & then FS00.
    Simple question but I'm confused.
    Regards,
    Vikas

    Dear Vikas,
    Many friends have given the answer.  As this is the most important concept what i suggest is first u try all the three transaction codes and observe the difference what tabs are coming up in each transaction code. 
    And finally go to FS00 and try to know about each and every field in every tab.  This is so important and will be helpful.  I did a document using F1 and i learned about each and every field. 
    mail me if u want that document at [email protected]
    U can very easily create yourself.  Nothing great in it.  But, to save ur time.
    Regards

Maybe you are looking for