Need table and field

Hi experts,
These are the table and field i want get it, but there's no data appear when i try it in my sapscript form.
ALV_SAPLQMAL_001
CHANGED_DATE
ALV_SAPLQMAL_001
CHANGED_TIME
ALV_SAPLQMAL_001
CHANGED_BY
ALV_SAPLQMAL_001
FIELD_CONTENTS
Please advise, i need alternative table-field name to retrieve data.
Thanks in advance, I'll rewards marks ~

Hi S.r.v.r.Kumar ,
I can't get the correct table and field to display the data in my form (sapscripts)
In t-code QM03 - Extras - Notification Documents - Action Log
These are the data i want it to be at my form (sapscripts)
http://img406.imageshack.us/img406/7774/q2yh3.jpg
Any ideas to get the table and field for the data in the 3 column n row?
Please kindly advice, thank you.
Edited by: miLka Sasa on Jun 20, 2008 10:09 AM

Similar Messages

Need table and field to know whether GR was done for PO

Hi gurus,
I want to know whether GR was done for an PO.
Through which table and field I can know it?
regards,
vimal

Hi
If GR / IR is done for the PO, the PO gets updated in table EKBE - Purchase order history.
If No GR /IR is done then PO will not appear in this table
Thanks & Regards
kishore

Need table and field in MIRO

Hi,
Here they change the invoicing party while doing MIRO for import orders only.
Now they want to track the Invoicing party with the concerned material and quantity involved. So can anyone say the concerned table and field.
regards,
sathya

Hi,
Tables are:
RBKP (Invoice Header)
RSEG (Invoice Item)
and fields:
Invoicing Party can be found
RBKP table LIFRE field
Quantity from RSEG MENGE field
(and MEINS Base Unit of Measure)
Material number from RSEG MATNR field
And you can join RSEG and RBKP with BELNR field (Inv.Number)
Hope it helps

About Asset report - table and fields

Hi ,
I am developing an Asset Report, I need table and field names for following -
a) GL A/C P&L
b) ASSET DEPRECIATION SCHEDULED
c) FORCASTED DEPRECIATION
d) PLANNED EXPENSES VERSES ACTUAL EXPENSES
e) GAP DEPRECIATION CATEGORY
e) When user enters the asset into SAP, the depreciation expense will automatically book to the sub-ledger. However in order to get the amount on the general ledger, which would be closed for prior periods, user must book a manual entry. So , I need this manual entry field.
Please guide me.
Regards,
Narayan

problem solved

Table and fields name required

Hi ,
I am abaper ,i need yr help .
i had to develop stock transfer report and needed table and fields for stock transfer
which include way bill no., transport doc. no and date ,stock transfer memo no.
kindly do held me.

Sales and Distribution Tables
KONV Conditions for Transaction Data
KONP Conditions for Items
LIKP Delivery Header Data
LIPS Delivery: Item data
VBAK Sales Document: Header Data
VBAP Sales Document: Item Data
VBBE Sales Requirements: Individual Records
VBEH Schedule line history
VBEP Sales Document: Schedule Line Data
VBFA Sales Document Flow
VBLB Sales document: Release order data
VBLK SD Document: Delivery Note Header
VBPA Sales Document: Partner
VBRK Billing: Header Data
VBRP Billing: Item Data
VBUK Sales Document: Header Status and Administrative Data
VBUP Sales Document: Item Status
VEKP Handling Unit - Header Table
VEPO Packing: Handling Unit Item (Contents)
VEPVG Delivery Due Index

Which tables and field I need?

Hi all,
I am new to BW. Can someone tell me which tables and fields I need if I load data (sales report;t code:MCTG; s001)from R3 to BW. Which extractor do I need in LBWE or SWIB?
I may need to answer as soon as possible. Any hlep will be appreciate. Thank you.
Koala

Hi Koala,
LBWE is a tcode for Logistics Cockpit extraction. It's a direct code. You can find it also in tcode SBIW expanding nodes.
Knowing the fields that show up in your report you can compare them with queries, cubes, infosources and datasources in a business content.
Just make a little research:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/63073c52619459e10000000a114084/frameset.htm
Best regards,
Eugene

Help needed in Table and field

Hi all,
can any one tell me the table and field to get basic unit of measure and unit of issue.
I guess both are different.
Thanks

For base unit of measure, uom, T006 is the main table.But whereever you have a quantity yu will find UOM in that table. The field is MEINS.
when you say unit of issue, you mean actual unit of measure right?
In that case it again depends on what you are looking at. Example
in table LIPS there is base UOM and Actual UOM.
base is always "MEINS" and actual is "LFIMG" in this case.
So get the table in your functional area and check for the actual uom field in SE11.
Regards
Message was edited by:
Sandeep Bhavsar

Table and field for the given object

Hi all,
We are developing a report , i need following table and fields. Could you please help me on this?
Supplier
No of approval required
Approval status
Approval pending with
In approval since
Thanks in advance , will appriciate any input
Hareesha

Hi ,
Still am not able to find out the FM/ table whom its pending for approval (shopping cart). Could you please help me on this?
(E.g: Shopping cart got created and having 7 levels of approval (Manager1, 2, 3,4,5,6 and 7),let us say First 2 manageru2019s approved, 3rd manager has to approve the Shopping cart, we need to pull these information of pending with 3rd manager in our Z-report )
Thanks in advance
Harish

Asset accounting Tables and Fields.

Hi Experts,
I need some table and field in asset accounting, my requirement is below.
1) 2009 depreciation expense for all assets still in service (not written off during 2009) (by class, by asset); and
2) 2009 depreciation expense on all assets written off during the year (by class, by asset)
Thanks in advance.
REgards,
Sam.

Hi Sam,
I think in ANLC you find what you need.
If not, give me feedback
regards Bernhard

Table and fields for tax details

Hi,
I have to create one Finance module Report in which i want to display net amount without tax for one single line item which is open item for incoming customer invoice, the accounting department need to know the net value (without tax) .
In tcode FB03 , if you see the document number then it will give all accounts(customer), posting key wise amount, but this amount is gross amount. in this amount tax amount is added as per tax code. (you can see by clicking tax details tab), and tax calculated is for whole ducoments number not for single line item.
i want net amount without adding tax amount for particular single line item. so please guide me table and fields from where and how i can calculate. in tax tab there is field base amount but its giving calculation against all total against document.
table i am using in my report is KNA1.KNKK, KNB1, BKPF. BSEG.
Give me some idea. how can i prepare report.
Have a Nice Day,
Regards,
Sujeet

Dear Dzed Maroz ,
Thanks for your reply.
I have already checked these fields (HWSTE, FWSTE) in table BSET. this fields tax amount againt that Document Number. (which may contains more than one line items), but my requirement is to find the amount without tax for individual line item.
reason is , i want to display in my report only open items and it will be a line item, so i am displaying net amount as well base amount (without tax) for particular line items.
but tax details is calculated based on document number not against customer number.this is incoming invoice
,and in customization tax code is assigned, so its reflecting amount after including tax amount.
is there any way to find out solution? please give me some idea.
regards,
sujeet

Custom report table and field mapping

Hi Experts,
i am writing a functional spec for the custom report to be developed by developers and need to know the table and field name for the following items:
Employee Number
Name
Original Hire date
Adjusted Hire date
Salary Class
Rate of Pay
Emp. Status
Classification
Acounting Unit
Activity (WBS)
Accrual Beginning Balance (Hours)
Accrual Beginning Balance (Dollars)
Accrued (Hours)
Accrued (Dollars)
Used (Hours)
Used (Dollars)
Other / Manual Adjustments (+/-) (Hours)
Other / Manual Adjustments (+/-) (Dollars)
Other / Manual Adjustments Description
Accrual Ending Balance (Hours)
Accrual Ending Balance (Dollars)
Vested Status
PlanCode
PlanDescription
Thanks,
Lisa

I can give you a 30,000 foot answer, but to get down to ground level I would have to know your system. There is way to much missing information in your request to give you a definite answer.
Employee Number - if you are using LDB PNP/PNPCE to run your report then it is the field PERNR-PERNR.
Name - IT/PA0002-NACHN -Last Name, IT/PA0002-VORNA-First Name.IT/PA002-MIDNM-Middle Name. Depending on your system configuration these fields are also stored on IT/AP0001-SNAME (Last Name-FirstName) or ENAME(First Name, Middle Name, Last Name)
Original Hire Date-IT/PA0041-This stores multiple date types with a specific code to identify what each one is. You will need to know the code for OHD.
Adjusted Hire Date - same as above
Salary Class- not sure what you are talking about, but salary information is stored on IT/PA008
Empl Status - IT/PA000-Stat2
Classification-not sure what field you are talking about, but IT/PA0001 is where this type of information is stored
Accounting Unit-same as above
Activity(WBS)- now you are getting complicated. This is stored in Cost Distribution HRT1019-POSNR, but you have to know how to connect the dots to get there.
Accrual Beginning Balance(Hours)-I would go to the ABWKONTI table in the Time Cluster for this fields ANZHL & KVERB
Accrual Beginning Balance(Dollars) - this will probably have to be computed
Used(Hours)-You can either compute this balance by computing the difference between the Beginning/Ending balances or read back through the appropriate Time Cluster Tables or total IT/PA2001 and IT/PA2013.
Used(dollars) will probably have to be computed
Other/Manual Adjustments(Hours) - not sure but you may be looking at IT/PA2013
Other/Manual Adjustments(Dollars)- will have to be computed
Accrual Ending Balance(Hours)-I would go to the ABWKONTI table in the Time Cluster for this fields ANZHL & KVERB
Accrual Ending Balance(Dollars) - this will probably have to be computed
Vested Status - I have no idea
Plan Code-Plan Code for what(Health Ins, Life Ins, Retirement Plans, Flexible Spending?)
Plan/Description-see above

How to find all the DDIC tables and fields of Tcode?

Hi All,
For several transactions we have caprtured all the filed names along with the technical names.
Ex : in VA03 - in the initial screen ,postal code field is there.When i see F1 help for that field i could see POST_CODE2 as its technical name.
But i want to see the actuall DDIC table field which corresponds to this field that is LFA1-PSTLZ.
Like wise there are so many T-codes for which i need do the same thing.But for some transactions i am unable to find out the database tables and the corresponding fields.Please suggest any other easier way to do this.
Is there any way to find out all the DDIC tables and fields that gets updated for a Tcode?
Please help me out in this.
Thanks,
Jyothi D.
Edited by: jyothi dosapati on Mar 27, 2008 2:48 PM

HI,
DDIC tcode is SE11
GIVE THE TABLE NAME THERE AND CLICK DISPLAY
FOR EXAMPLE
TYPE LFA1 THERE AND CLICK DISPLAY....
Regards,
V .Balaji
Reward if usefull

Table and fields

Hi Guys,
I need to generate following reports on daily basis from Production client. But its taking lot of time becoz of huge data to retirve. I request you to help me out in which table and fields can i get the data faster, so that time can be saved.
Metric                                             Daily/Cumulative     T. Code
Sales orders Created                                  Daily                SE16(VBAK)
Incomplete Sales orders                 Cumulative                    V.02
Open Sales orders                                  Daily                    VA05
Sales orders PAST due for delivery          Cumulative                    VLI0A
Deliveries created                                  Daily                   SE16(LIKP)
Documents Blocked for Delivery                Cumulative                     VA14L
Deliveries shipped                                 Daily                     VL06O
Outbound Shipped Not Billed                 Cumulative                      VF04
Invoices Created                                  Daily                 SE16( VBRK )
Documents Blocked for Billing                  Cumulative                  V23
Thanks in advance for your help,
Regards,
Vamsi P
<b></b>

Hi,
Please read the rules of engagement before you post.
Step 1: Finding An Answer
Rule number one: Try to find the answer first. There are tons of resources out there, show that you have tried to find the answer. <b>A question that shows that the person is willing to try and help themselves is more likely to be answered than one which simply demands information.</b> Tell us what you have done to try and solve the problem yourself - often we can learn from that too!

Tables and Field

Hi
What is the table and field
1) PO Currency
2) Still to be delivered (qty)
3) Still to be invoiced (qty)
4) PO Vendor Name
regards
MM

Hi
1) PO Currency ---EKKO -- WAERS
2) Still to be delivered (qty) --- EKET -- WEMNG
3) Still to be invoiced (qty) -- Needs to calculate on the basis of deliveries made & invoices against PO.Check Purchase order History EKBE Table.
4) PO Vendor Name -- EKKO -- LIFNR
Regards
Honey

SAP CRM Tables and Fields for Contract start and End dates

Hi Experts,
Please Provide me SAP CRM Tables and Field names for the below.
SAP CRM Contracts start date and End date
SAP CRM Conditions(PROO, K007 etc....) records start and End Date.
Thanks and Regards,
Teja

correction
10 Replies Latest reply: 24 May, 2013 8:38 AM by nishant Vasudev
Tweet
SAP CRM Tables and Fields for Contract start and End dates
This question has been Answered.
Teja Dhar 12 Oct, 2009 8:03 PM
Currently Being Moderated
Hi Experts,
Please Provide me SAP CRM Tables and Field names for the below.
SAP CRM Contracts start date and End date
SAP CRM Conditions(PROO, K007 etc....) records start and End Date.
Thanks and Regards,
Teja
Correct Answer by Sreekantha Gorla on Oct 22, 2009 8:22 PM
Hi,
dates will be stores in the table 'SCAPPTSEG'.
I double checked it. This table stores all the date types of one order transactions...
The relationship is as follows..
CRMD_ORDERADM_H- guid = crmd_link-guid_hi
crmd_link-guid_set = SCAPPTSEG-APPL_GUID.
Thanks and regards,
Sreekanth
<:footer>See the answer in context
6281 Views
Topics: Customer Relationship Management
Reply
Average User Rating
0
(0 ratings)
My Rating:
Rating Saved!
Comment on your rating
Re: SAP CRM Tables and Fields for Contract start and End dates
Robert Jesionowski 14 Oct, 2009 2:23 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi,
you should try with FM: CRM_DATES_READ_SINGLE_OB or CRM_DATES_READ_DB.
There is something in table SCAPPT and SCGENAPPT.
Regards, R
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 22 Oct, 2009 5:30 PM (in response to Robert Jesionowski)
Currently Being Moderated
    Hi Robert,
I am not able to find contract start date and End dates in the tables SCAPPT and SCGENAPPT.
Can you suggest some relevant tables.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Sreekantha Gorla 22 Oct, 2009 2:35 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi,
Table SCAPPTSEG stores the contract start and end dates.
Thanks,
Sreekanth
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 22 Oct, 2009 5:32 PM (in response to Sreekantha Gorla)
Currently Being Moderated
    Hi Sreekanth,
I am not able to find contract start date and End dates in the table SCAPPTSEG.This is for appointments.
Can you suggest some relevant tables.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Correct AnswerRe: SAP CRM Tables and Fields for Contract start and End dates
Sreekantha Gorla 22 Oct, 2009 8:22 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi,
dates will be stores in the table 'SCAPPTSEG'.
I double checked it. This table stores all the date types of one order transactions...
The relationship is as follows..
CRMD_ORDERADM_H- guid = crmd_link-guid_hi
crmd_link-guid_set = SCAPPTSEG-APPL_GUID.
Thanks and regards,
Sreekanth
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Wim Olieman 23 Oct, 2009 9:12 AM (in response to Sreekantha Gorla)
Currently Being Moderated
    Hi,
I can tell you where the pricing records are saved, replicated from ECC.
The data from ECC table Axxx (e.g. A304) is replicated to CRM table
CNCCRMPRSAPxxx (e.g. CNCCRMPRSAP304).
Here you can find fields TIMESTAMP_TO and TIMESTAMP_FROM.
About the dates: what Sreekantha Gorla stated, about table 'SCAPPTSEG' is correct.
What might help is to execute program "CRM_ORDER_READ". Here you can find
the relevant entries also.
regards,
Wim
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 23 Oct, 2009 4:59 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi Experts,
Thanks a lot for your support.My problem got resolved.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
rajesh gadamsetty 27 Nov, 2009 12:29 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi Teja
Please let me know how you got the dates. i got the same requirement
Report Abuse
Like (0)
Reply
Correction on above mail.
Hi Sanjay,
Can you please help me to find the contract st art date and end date fetching from the table as below
ITEM DATES:
Select guid_set from table CRMD_LINK where guid_hi              = CRMD_ORDER_I-GUID AND
                                                                          OBJTYPE_HI     = '06'
                                                                          OBJTYPE_SET = '30'.
Select * from SCAPPTSEG where APPL_GUID = guid_set.
as from the table scapptseg has some unusal fields which fields to select to get the start date and end date and on what condition and isuppose we need to convert als the same
pls suggest further on same
regards
Arora

Need table and field

Similar Messages

Maybe you are looking for