Need Technical Specification on SAP Scripts
Good evening everybody,
Plz send a Technical Specification with coding on SAP Scripts. It is very urgent.
Thanks for sending in advance
Venkat
http://www.sappoint.com/abap/userexit.pdf
Hope it helps.
Regards.
Similar Messages
-
Need to convert a SAP Script to Smart Form
Hello,
I need to convert a SAP script to a Smart form.
I am aware of converting it but have a question abt print program?
Can the print program which is currently attached to the SAP script supprot the Smart form?
Could some one let me know if i can use the same program or need to do some modifications in it?
Pointa rewareded if useful.
Thanks,
Krishnahi
t-code smartforms
utilities->migrate sapscript
check the link below it provides steps to convert sap scripts to smartforms
http://www.ficoexpertonline.com/downloads/Iyer_SmartForms.pdf
Check these threads.
Smartforms -> sapscript
Re: Convert SapScript to Smartforms ?
regards.
Kiran Sure -
Need Technical Specification on User Exits
Hi all,
can u send me a technical specification with coding on User exits. Hope u will send soon.
Thanks in advance
Venkathttp://www.sappoint.com/abap/userexit.pdf
Hope it helps.
Regards. -
Hi all,
I am trying to add content of field (Tax VAT) in sap script and put into another symbol using following command
/:SUMMING program symbol INTO sum symbol
but after running me22n tcode to display the PO error occured
<b>Overwriting a protected field</b>Error analysis
The program tried to assign a new value to the field "<SM_SUM>" even though
it is protected against changes.
I am modifying medruck std PO script and using standard prog. for it i.e. SAPFM06P.
Please tell me wheather it is necessary to make sum symbol dynamically define in SAPFM06P and how to do this.
with regards
Rajvinder SahniHi...
If you need to summ numbers or do any operation, in your SAP Script you can call subritunes and do all the operations you need.
On your SAP script write:
/: PERFORM subrutine IN PROGRAM Zprogram
/: USING &PAR1&
/: CHANGING &PAR2&
/: ENDPERFORM
PS: You can use as many USING AND CHANGING as you need.
And the zprogram goes;
FORM subrutine TABLES t_in STRUCTURE itcsy
t_out STRUCTURE itcsy.
data: par1 type n.
Read the value on PAR1
READ TABLE t_in WITH KEY 'PAR1'.
CHECK sy-subrc = 0.
PAR1 = t_IN-value.
DO WHATEVER YOU NEED TO DO
ADD 1 TO PAR1.
SEND THE VALUES BACK
READ TABLE t_OUT WITH KEY 'PAR2'.
t_sal-value = PAR1 .
MODIFY t_OUT INDEX sy-tabix.
ENDFORM.
Hope this helps,
Gabriel -
How to print BARCODE in DATAMAX Printer using SAP Script?
Hi,
Can anybody guide me how to print BARCODE using DATAMAX Printer?
I need to develop a SAP Script, through which i need to print the BARCODE.
Pls. let me know the parameters for Script and how to print using print program.....
Regards,
Hemantmake one form in sapscript with one main window: like this
/E ETIKETT
/* Format = '57x19', Printer = 'Bradyprinter Model 1344'
/ ~f350
/ ~n
/ ~M0500
/ ~O0220
/ ~SG
/ ~s
/ ~c0000
/ ~e
/ ^D
/ ~L
/ D11
/ H20
/ PC
/ pC
/ SC
/ A2
/ 1911A1200400005&knmt-kdmat&
/ 1911A0800300005&knmt-postx&
/ 1911A0800100005VS-Nr : &KNMT-MATNR&
/ 1911A0800000005Datum : &date&
/ Q0001
/ E
in this script &mseg-matnr& and &mseg-charg& are 2D Barcodes
/E ETIKETT
/* Format = '57x19', Printer = 'Bradyprinter Model 1344'
/ ~f350
/ ~n
/ ~M0500
/ ~O0220
/ ~SG
/ ~s
/ ~c0000
/ ~e
/ ^D
/ ~L
/ D11
/ H20
/ PC
/ pC
/ SC
/ A2
/ 1Wc99000001400082000012012&mseg-matnr&
/ ySPM
/ 1911A1000380055&mseg-matnr&
/ 1Wc99000001501702000012012&mseg-charg&
/ 1911A0800260055&mkpf-budat&
/ 1911A0800140055&mseg-mblnr&
/ 1911A0600020008&makt-maktx&
/ Q0001
/ E
then you need your own printprogram and everything is fine. with open_form ; start_form ; write_form; end_form
you can communicate direct with the Datamax Programming Language from SAPScript to the Barcode printer.
i also have the datamax programmers manual as pdf if you want i could send it to you. let me know by PM.
also have look into HW 490295 the bartender Solution works fine for me to create the SO10 text's
greetz
tony
Edited by: Tony Wienhold on Jul 17, 2009 4:37 PM -
Sap script convert to pdf and then send to email
Hi,
good day sap guys
ive dev the sap scipt for customer statemnet one which is used the t.code is f.27.
i need to convert the sap script to pdf and then send to email.
plz let me know..
how to do it.
regards
chanduHi,
I script program use the following (go to the "call function 'CLOSE_FORM'")
data: binfilesize type i.
data: pdftab type table of tline with header line.
data: i_itcpp like itcpp.
data: g_t_otfdata type standard table of itcoo with header line.
call function 'CLOSE_FORM'
IMPORTING
RESULT = i_itcpp
tables
otfdata = g_t_otfdata[]
exceptions
others = 1.
if sy-subrc ne 0.
retcode = sy-subrc.
perform protocol_update.
endif.
call function 'CONVERT_OTF'
exporting
format = 'PDF'
importing
bin_filesize = binfilesize
BIN_FILE =
tables
otf = g_t_otfdata[]
lines = pdftab[].
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
concatenate file_path '.pdf' into filename.
call function 'GUI_DOWNLOAD'
exporting
bin_filesize = binfilesize
filename = filename
filetype = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = pdftab[]
FIELDNAMES =
exceptions
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
others = 22
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif. -
Hi All
Y do we need Text element in SAP SCRIPT ?yes you can.
are you using your own print program or a standard?
Each window will be called by the code so if you have no elements in there all the data is output in the order they appear in the form. -
Reg : modification in sap script driver prog
Hi folks,
need some help regarding sap scripts
i havecopied the standard layout medruck to my layout
and made some changes.
now i have to modify the driver program
in the tnapr table the driver prog for medruck is
given as sapfm06p
but when i see the source code for that in the
editor
evrthing is like included functions there
in the incuded there is a form named with "entry_neu"
which has some code calling few functions
but...
there is no openform,no write form etc.
where should i give the name of the form name that i have
i have developed(changes made to the copy of the medruck)
where should i make the changes in the prog
how about going at modifying the driver program
do i have to assign the o/p type using the tcode nace.
please give me the steps
please treat it as very urgent
expecting a promt responses from u
thanks & regards,
annamreddyWe modified the driver program because there was a requirement to add stuff that was not available in the standard driver program. Here is what we did.
First, Copied the SAPFM06P program to SAPFZM06P. Did not copy all of the includes. Copied only the FM06PE02 include program to ZFM06PE02.
Second, in the include ZFM06PE02, there is a form call ENTRY_NEU, this is the entry point to print the form, notice that there is a function module in this form called ME_PRINT_PO. This is the function module that will print the PO. Eventually, you will want to call a Z version of that funciton module.
Third, copy the entire funtion group MEDRUCK into ZMEDRUCK. This is the function group which has the function module ME_PRINT_PO. Don't copy the includes into Z versions. You don't need to modify all of them. Only copy them when needed. Save and Activate.
Finally, go back to that include program ZFM06PE02, now make the call to ME_PRINT_PO to the Z version, in my case it is ZME_PRINT_PO. Save and activate.
Make sure that you change your configuration in SPRO to use the SAPFZM06P program instead of the standard. Now your form should be printing from the custom driver program. Modify away!!!!
Please don't forget to award points for helpful answers. Thanks.
Regards,
Rich Heilman -
RE: BI functional and Technical Specification
Hi,
Can anybody share BI Functional and Technical Specification for SAP R/3 data extraction for modules FI/CO, SD, MM, WM/MM.
Thanks.Hi Hitesh
Bi Functional Specification is like this where you get the details of what is the report they are looking for and what does that do in detail explanation from the key user of that particular area.
and also you will receive an document saying that the particular tables and fields ...
After receiving that then you will be starting an work by preparing an Design document of what are the objects you are going to use in the system and what type of Data Source your are using and Targets etc.. This is nothing but an Technical Specification... and this also contains what type of the load is it...
Hope this helps you..
Thanks -
Warehouse Management - Need list of supported SAP RF Scanners
I am looking for a list of supported RF scannign devices for SAP warehouse management. If a list does not exist, does anyone know of a note that provides the technical specifications that SAP requires for RF handheld scanners?
Hi Greg
We have many companies which provide RF guns and most of them are supports SAP
We use Motorala Symbol - Rf scanners and Zebra Printers
Trying searching the below link:
http://www.systemid.com/search/search.asp?strSearch=cordless&type=010230?source=GGLPPC&gclid=CJL77ur_lJ0CFRMhnAod-1nO2g
Regards
Rudresh -
Is it possible to use same sap script for different comp code with difflogo
I have 3 company codes. I need to use same sap script to all but each company code has different logo. I dnt want to go for 3 different sap script. Is it possible to change in coding
like this
If comp code = '100'
print ' logo1'
If comp code = '200'
print ' logo2'
If comp code = '300'
print ' logo3'
in same sapscript.If yes how ?Hi,
Yes you can do it.
In Sap Script use:-
/: If Comp code='100'
INCLUDE ZHEX-LOGO100 OBJECT TEXT ID ST LANGUAGE EN
/:Elseif comp code = '200'
INCLUDE ZHEX-LOGO200 OBJECT TEXT ID ST LANGUAGE EN
/:Else
INCLUDE ZHEX-LOGO300 OBJECT TEXT ID ST
LANGUAGE EN
/:Endif
I hope this helps,
Regards
Raju Chitale -
Hi All,
I am not sure here is the right place, but i couldn't find any where more.
I want to design some accessories about iPod but i need technical specifications. How can i find these informations?
P.S. : To Mods, please move the topic, if it is not at the right place.
RegardsIs there anything useful here or here?
(14392) -
I need Functional Specification in Reports and Scripts to Practice
hi
i am practicing ABAP,
I need Functional Specification in Reports and Scripts to Practice
please any one give me.
thanks in advance.
byeI am not sure what you are requesting will be of any help for you, as functional/technical specifications are specific for each implementation and might be dependent on the configuration on that system.
If you are on IDES try to look through the sample programs provided by SAP and see if you can implement your own version of the those.
hith
Sunil Achyut -
Need to add special characters in sap scripts
Hi All,
I need to add special characters in sap script.
I have used them as it is my script,but in the print preview i am able to see '#' instead of those special characters.Can anybody please tell me the way in which we can add special characters in the scripts.
eg. 'Shlesha' i.e. name in inverted colons.
ThanksHi
If # is coming means, that is the problem with the printer. I think u might have used your local printer to see the print preview.
Don't use LOCL or LP01. Our local printer won't recognize those characters.
Just change the printer name to client printer name. It will work. -
Need to print some text only in last page in SAP script
Moved to correct forum by Moderator. General wasn't right either.
Hi All.
I need to print "Remarks" only in last page of sap script.
Can anyone please help me on this.
Thanks
Senthil kumar V.
Edited by: Matt on Nov 21, 2008 7:38 AMHi,
you have 4 possibilities.2 at non main window, 2 at main window.
at non main window.
1. /: IF &PAGE(C)& = &SAPSCRIPT-FORMPAGES(C)&
remarks
remarks
remarks
/: ENDIF
2, /: if &NEXTPAGE& ='0'.
remarks
remarks
remarks
/: ENDIF
at main window
3. Add the remarks at the last item of the main which is printed
4. add a new item to your main (/E)
put your remarks in it.
Change your program in such a way this item will print as last one.
like
/E REMARKS
remarks
remarks
remarks
and in sapscript program add logic at the end.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'REMARKS'
EXCEPTIONS
element = 1
window = 2.
I am sure this will do. Make a choice.
Gr., Frank
Maybe you are looking for
-
HT6065 After upgrading to Mavericks , I now find my Mac mini runs very slowly.
Now that I've upgraded to Mavericks why does my Mac mini feel like a PC? Speed was never an issue I have stock standard 2011 model.... Processor 2.3 GHz Intel Core i5 Memory 16 GB 1333 MHz DDR3 Graphics Intel HD Graphics 3000 512 MB 500Gb Hdd SAT
-
Hi, I'm newbie in Oracle BAM and I'm having problems using BAM with SoapUI, a test enviroment for webservices. I send records, via XML, from SoapUI to BAM succesfully, but in date fields, if I keep this fields blank, a default date is received from B
-
Best tool for cloning drive and regular back-ups
A 500gb 7200.4 seagate drive just arrived, and I'm intending on cloning the 500gb 5400rpm stock drive in my 15" 2.8ghz unibody MBP to the 7200.4 (attached in a 2.5 SATA USB enclosure), and then using the 7200.4 as the main drive, once I've found time
-
I have some files that I want to keep secure, so I locked them in a folder. Recently, after switching to Mountain Lion, I went back to the folder and tried to unlock it, but the "Locked" button was gray and not clickable (the actual button that says
-
Question about modifying wizard based uix-jsp
On a browsepage I turned this: <uix:header text="Results"/> <uix:spacer height="15" /> <uix:form name="form1" method="GET"> <bc4juix:Table width="100%" datasource="ds1" > <uix:columnHeaderStamp> <uix:styledText textBinding="LABEL"/> </uix:columnHeade