Need to add a new field to XD01 under company code data tab

Hi,
I need to add a new field under Company code data of XD01 under Account Management tab.
I came to know two BADI's CUSTOMER_ADD_DATA and CUSTOMER_ADD_DATA_CS can be used for this. But for these BADIs we need to create a sub screen.But for my requirement I need not use a subscreen just to add a field.
Please let me know how to do this?

Hello Pavan,
Do you have any solution for this issue? I only can creat a new tab but hi prefer as you, creat a field Company code data of XD01 under Account Management tab.
I read that is not possible, this is true?
Best Regards,
Eduardo Paiva

Similar Messages

Add a new field in va02,va03 and vf02 & data tran. in these fields VOFM

Hi All,
I have a requirement, I need to add a new field in the sales order header part and even a field in the billing document, once I add this field up in both the documents in the header part i need to create a copy routine using the VOFM transaction,
Can any body help me on what's the procedure to add a field in billing document as i dont find any screen exit for doing it and does the copy routine transfer the data ( Custom Field ) from Sales Order to the Billing Document, if yes can somebody help me with the procedure on how to and code of it.
Regards.

Hi,
The procedure to create the new VOFM.
1. Go to VOFM transaction
2. Page down until you find a new spot on the page to put in the VOFM number and description.
3. Put in the VOFM number and the description of the VOFM.
4. Now the VERY IMPORTANT part of the process. Double click on the VOFM description not the VOFM number to create this as a Development/Correction and not as a repair. If you double click on the number then this copies some existing code and prompts you for a repair.
5. Activate and generate the VOFM routine. Note: Configuration must be setup by the OM team for this step.
for example Go to the routine number that needs to be copied.
Put your cursor on the routine number field that needs to be copied.
Overwrite that number with your new routine number and hit enter.
The new routine will be created as a copy of the old routine and you can modify the new routine as you need it.
Ex.
You have to copy routine 104 to 904
Routine number Description Active
104 Bill.bus.item data X
Put your cursor on 104 and then change it to 904 and hit enter.
904 will be created as a copy of 104 and you can make your changes in 904.
Don't forget to activate it after you are done.
refer the below link
https://forums.sdn.sap.com/click.jspa?searchID=3604222&messageID=994791
Regards

Need to Add a new Field to FamAddPG

Hi All,
We are trying to add a new field Start Reason Id field in to a view object FamilyMembersVO.
This field should be able to be entered and updated in the FamAddPG (oracle/apps/ben/selfservice/enrollment/webui/FamAddPG) .
We were able to identify VO and extend the VO and were able to personalize the page and add the field.
However there is no related Entity Object (EO).
When we try to enter the field it is erroring, we try to modify the related controller (CO) and Application module (AM), however didn’t work.
So our question in order to add a field to a VO, when there is no related EO what should we do.?.
What are the objects we need to extend and what all objects we need to modify? i.e VO, EO AM etc.
Any pointers help would be much appreciated.
Thanks In Advance!!
Best Regards,
Kiran Ravuri

Hi Kiran,
You didn't mention what error you got after extending the VO, there may be different errors, different reasons and hence different solutions.
Second Insert/Update/Delete happens in AM --> AM just handles the transaction but insert/Update/Delete happens through code written in AM is not true.
If VO is EO based then we enter the data on page and submit the page then this data will posted to EO and and on commit it will be saved in database automatically.
Please specify the error, then we will be able to suggest you something.
Regards,
Reetesh Sharma

Need to add a new field to the Schema for MDM Syndicator

We are running MDM 5.5 SP6.
We have a requirement to add a new field and syndicate the new field to the our Procurement System.
I was able to add the new field to the repository and schema in SAP MDM Console. However, when I went into the Syndicator to map the new field (which I do see) to the new Schema field, I don't see the new field to map in the Schema.
How can I change the existing syndication jobs (11 of them) to use the new Schema? Or do I have to recreate all of them?
Thank you in advance!!!

Hi Janynne,
I hope you have modify the Syndication XSD(add new field) and then load it in XML Schema table of MDM Console, right ?
If you have done it, now open MDM Syndicator>Go to File>Open, select the required Remote system and Available map.
Now your existing map will be loaded which has not the required added field, Now again, go to file-->Export.
Give file name and save this syndication map on your Desktop. Once you have done this.
Go to File>New>Select respective remote system and Type as XML Schema if you have loaded this XSD in Console else select Type as XML Schema file and select the modified XSD (added new field XSD) from Desktop. Once it is loaded, import the existing syndication map(which you have exported as said above) which should have all the fields mapped, now in target side you will have here new added field too, map it with required source field in Item Mapping and then go to file>Save as>select the required Remote system and give new map name. Use this map for exporting files for future reference.
Also, if your are using Port Concept, you need to change the Properties Map and XML Schema in Port of MDM Console.
Regards,
Mandeep Saini

Need to add a new field in Milestone screen

Hi Gurus
I have a request to add a new field in milestone screen. Milestone under WBS element and Milestone under network.
Is there any Exit for the same ? can you tell me the different ways we can add a field in the screen
- Pithan

Hi,
i did create a new milestone usage. There i have the option to put "billing Plan Type", "Date Category" and "Start/Finish". I did not see an option where i can add a custom field. I also checked the node for "Billing Plan Types" and there also i saw only the standard screens / fields. Did i miss something here?
Thanks
Sreekanth

How to add a new field in the cube and load data

Hi,
The requirement is
We have ZLOGISTICS cube , the data souce of this filed has REFDCONR-reference dcument number filed . We have to create a new field in cube load data and get this new filed into the report also.
Please any one can help me with the step by step process of how to do?
How to get the data into BW and into the report.

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

How to add a new field to the Quote: Shipping and Bill Tab Payment region

Hello All,
We have a requirement to add payment description column to the Payment Region of Shipping and Bill tab in Quoting User(Quote Page).
We have extended the View object HeaderPaymentsVOObj and created a custom view object, then created and ported the substitution.
In Quotes page, 'Shipping and Bills' tab Payments region, we have created a new item(Payment Description), assigned the custom View object instance and attribute to it.
We are able to enter and update the payment details before substitution, but after substitution while entering payment details we are facing the below error.
At most one payment record can exist at quote header/line level.
Help and inputs are highly appreciated.
Thanks in advance.
Regards,
Supriya.

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

0Customer I need to add a new field KDGRP

Hi All
I need to add the field kdrgp in the 0customer it's possible? any can helpme...
tk's
ulna

Hi Raj,
Sorry in which part I can and need Add the field, I need have the field KDGRP inside the data master in customer.
please do you tellme step by step
thank's

Need to add a new field to Delivery overview screen

Hello,
I have a requirement to add a Z.. field on delivery document overvew screen. It should appaer next to 'item category' field.
Could some one help me in this? I would like to know if there is any user exit in SAPMV50A to put the logic.
Please give an idea abt this like after putting the code, what has to be done like should there be any table updation required etc.,
Points are rewarded.
Regards,
Krishna

Hi,
i did create a new milestone usage. There i have the option to put "billing Plan Type", "Date Category" and "Start/Finish". I did not see an option where i can add a custom field. I also checked the node for "Billing Plan Types" and there also i saw only the standard screens / fields. Did i miss something here?
Thanks
Sreekanth

How to add a new Field in MIGO

Dear Sir,
We have a requirement of adding a new FIELD in MIGO under the "Detail Data" . The purpose is that at the Item level , we should be able to mention some additional information . For the new Field , an additional Tab has to be created . The Field must except long Text type data and during MIGO Save , the Custom Field data must be saved in Z table .
We request , SAP experts to kindly guide us as how can we do this . A step wise guidence would be highly helpful .
We assure full points for the suggested solution please .
Regards
B Mittal

Hi,
1.Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton Information system.
2.Then mention the particular package name of the transaction you need to enhance. Then you will be shown the list of Enhancement components for that particular package.
3.Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development
4.Go to transaction CMOD and create a project
5.Then, click on the pushbutton Enhancement Assignments in the Application Toolbar
6.Click on the components in Application Toolbar.
7.Here you will be shown the function module exits, screen exits and Include tables.
8.Click on the custom screen in which it suits the requirement of adding the custom field to the layout.
9.Click on layout and go to get from dictionary and select the field you need to add and click ok.
10.Place the field in the layout and activate it.
11.After that you come back and check the respective function module in which you need to implement the code.Therfore we have chosen the Exit_sap_XXX
12.Now, code has to be written in the function modules EXIT_SAPMMXX_00X so that data flows to and fro between the main SAP program and custom sub screen program. Double clicking on the exit we get the following screen
Double click on the include and write the required code inside it. Then activate it.
Now come back and activate the entire project.

Add a new field(from transparent table) to the infoset

Hi,
I need to add a new field to the existing infoset in HR. I found that field exist in the CSKS table. in the infoset they are using PNP logical database. As per my understaning i have to link the CSKS-KOSTL with P0001-KOSTL.
Could you tell me how to do this?
Please do the needful.
Thanks & Regards,
Krishna.

Hi,
I have added that KOSAR in the additional fields and i added the code for that like
clear kosar.
select single kosar
into kosar
from csks
where kokrs = p0001-kokrs
and kostl = p0001-kostl.
Is it will work now? One more help how to add this change to the transport?
Please do the needful.
Thanks & Regards,
Krishna.

Add a new field to Co02 ( production order change )

Hello, I need to add a new field to the transaction Co02. I've found the following customer exit, but don't know which is the proper one. Maybe none of them can meet my requirement. Does anybody has any idea or experience?
Exit name     Short text
PPAPO002     Publication of APO Data in Transfer from APO to R/3
PPAPO003     Production Order R/3->APO: Check if Operation is APO-Relev.
PPAPO004     Planned Order Conversion from APO: New BOM Explosion?
PPAPO005     Enh. of Relationships in Proc. Order during Transfer to APO
PPAPO006     Influencing Initial Supply of Manufacturing Orders
PPAPO007     Overriding Checkbox Fields for Production Order APO -> R/3
PPAPO008     Override Order Type for Planned Order Conversion
PPAPO009     Customer Exit for Addition of Components and Items
PPAPO010     Filtering Components out of Quantity Propagation
PPAPO011     Performance-Related Adjustment of Remaining Duration
PPCO0001     Application development: PP orders
PPCO0002     Check exit for setting delete mark / deletion indicator
PPCO0003     Check exit for order changes from sales order
PPCO0004     Sort and processing exit: Mass processing orders
PPCO0005     Storage location/backflushing when order is created
PPCO0006     Enhancement to specify defaults for fields in order header
PPCO0007     Exit when saving production order
PPCO0008     Enhancement in the adding and changing of components
PPCO0009     Enhancement in goods movements for prod. process order
PPCO0010     Enhancement in make-to-order production - Unit of measure
PPCO0012     Production Order: Display/Change Order Header Data
PPCO0013     Change priorities of selection crit. for batch determination
PPCO0014     Select process orders for external relationships
PPCO0015     Additional check for document links from BOMs
PPCO0016     Additional check for document links from master data
PPCO0017     Additional check for online processing of document links
PPCO0018     Check for changes to production order header
PPCO0019     Checks for changes to order operations
PPCO0020     Process order: Display/change order header data
PPCO0021     Release Control for Automatic Batch Determination
PPCO0022     Determination of Production Memo
PPCO0023     Checks changes to order components
PPCP0001     P.Cost Planning: Additional Cost Elements for Person
PPEACT01     Customer Fields at Mode D
PPECMP01     Customer Fields: CMP Nodes
PPECMP02     Customer Fields: CMP Variants
PPEGEN01     General Engineering Node: Customer Fields
PPERES01     Customer Fields at RES Node
BTW, if this is impossible, can I rename a field (field name on the screen) of Co02 that I don't need, and add my own values to it?
Thanks.
Nuno

Hi Nuno,
how did you solve this problem?
tks

How to add a new field on the right side of 'Part function' in Opportunity

HI All
I have a requirement wherein I need to add a new field for 'first name/last name' on the right side of 'Partner function' field in opportunity search criteria..
Ex:(here i'm showing overview how the search criterial screen appears in UI since i can't attach screen shot)
Partner function is sales lead firstname/lastname
It is similar to...when we select the option 'Is between' for date field then automatically one extra field will appear
on the extreme right to enter a range for the date so similary I need to add one field to the extreme right where
the user will select 'first name/lastname' using 'F4' help in addition the abvoe 'Partner function'.
Could you please let me know how can we add it??
Regards
Anil

Hi,
First try to find out if you already have that field available in your view configuration. If yes, then you just need to add that to visible/displayed fields. Other wise you'd have to extend the context nodes using AET/EEWB. After you add the fields using configuration you can move them where ever you want to place them. I believe for first name/last name F4 comes by default.
Regards
Prasenjit

How to use OMJX transaction? Need to add an additional field on MIGO item

hi guys
we need to add a new field on the MIGO screen at the item level. We are trying to explore OMJX to add custom fields.
We have used append structutre to enhance the GOITEM structure but are not clear on how to use OMJX.
ANy idea how to use the transaction OMJX.
Thanks in advance

With the Business Add-In (BAdI) MB_MIGO_BADI, you can extend the
interface of the goods movements transaction (MIGO) with additional
tabstrip controls for the detailed information (detail tabstrips) and
header information (header tabstrips). It is possible for an external
application
o to display an additional detail tabstrip with own subscreen (max. 10
   lines) in MIGO
o to display an additional header tabstrip with own subscreen (max. 3
   lines) in MIGO
The program name, screen number and tab page text can be determined
dynamically. Different screens can therefore be controlled according to
the mode (for example, change mode, display mode, goods receipt, goods
issue).
Pushbuttons
It is not possible to implement pushbuttons in the MIGO menu, but you
can, however, implement pushbuttons directly on the external subscreen.
The OK code from MIGO is forwarded to the external application so it can
react.
Cursor Control
So that the cursor stays on the same subscreen after you press Continue,
if it was positioned there before, the external application in the own
PAI must hold the cursor positioning (on the same screen 'yes'/'no'; if
'yes', on which field), to set the cursor in PBO again.
Requirements
If you use the BAdI MB_MIGO_BADI in MIGO to update customer-own data, in
addition to the material document, to the database, you should note the
following:
o The BAdI MB_MIGO_BADI is only active in transaction MIGO.
o If you post goods movements with other transactions (for example, with
   MB01, MB1C, VL02N), you must ensure that customer data is also
   updated, if necessary.
   You can do this by using the BAdI MB_DOCUMENT_BADI (Creating a
   material document) to post the goods movements with the transactions
   mentioned above.
o Note that otherwise, posting the goods movements will lead to
   inconsistencies between SAP system data (for example, in stocks,
   material documents, FI documents) and customer data.

Add a new field to ODS

Hi All,
We need to add couple of Data fields to Order Header ODS which gets loaded daily in Production through Delta mechanism enabled in R/3.
Currently there are around 3 million records in the ODS.
Wanted to know how do I go about it.
Thanks,
Pradip Parmar.

Hi All,
Here is the exact solution as explained to me by my senior consultant.
1. Add 2 new fields in the ODS in the Development System.
2. Stop the scheduling of the load & After that completely empty the Delta Q in R/3. As mentioned that there are several loads further happening through this ODS which are Delta and also it itself gets loaded with Delta from R/3. Hence we need to clear / empty Delta Queue.
3. Once this is done now we transport the ODS from Development to test / quality to Production System and once this is done. We will again remap the DataSources and then again re-activate the Update / Transfer Rules.
4. Now Do a Re-Initialization of the Delta Queue and henceforth the ODS will get loaded with data in the new fields but the history data will not have any data for those new fields (This is what I was unaware of earlier).
5. We also need to add this new fields in the Data Targets which are getting loaded from this Modified ODS. And then Empty that Delta Queue and then do Re-Initialization for the same as well.
This is what I got to know and we shall be doing this in short time. Hope this works fine. As there are million of Records which we do not want to delete.
Thanks for all the responses.
Pradip Parmar.

Need to add a new field to XD01 under company code data tab

Similar Messages

Maybe you are looking for