Need to add tables in the pricing report(V/LB)

Hi
I want to add some table in the existing pricing report.But I am unable to do so.
My requirement was to add some new selection field in the Pricing report which is possible by adding the table in the existing pricing report.
But I found If I go to EDIT>Tables.there is one option is called "add table" which is appearing grey.
Can you found it the way to add the tables in the Pricing report.

Hi Sumit,
You cannot add anything to existing report - you need to create new one and there you will be able to choose more tables than you use now.
Regards,
Marcin

Similar Messages

Crystal report : can't add table in the samples provided by SAP

Hello,
I tried to add tables in the generic samples provided by SAP. I used the database expert and just added a new table but when I save the report in SAP and want to run it it is blank.
Is there another way to add a table ?
BR

Already tried all those tricks!
My question is concerning the standard layouts provided by SAP (downloaded from marketplace). The idea behind those reports is that you can use them as Templates.
The tables are not hardcoded with the table.field name but with a specific syntax that allows you to use those templates in any type of document (ex : you can use the template of sales order for delivery and invoices). The problem is that if you add a new table the report doesn't work!
Thank you for the response anyway.
Best Regards,
Arnaud

Which table keeps the Discoverer Report list?

Hi,
I'm new to Discoverer, actually I haven't started to use yet.
I would like to know is it possible to retrieve a list of reports created in Discoverer so that I can add them to the standard reports that I developed using Oracle Report builder in my application. If possible, which table can I get the report list?
My second question, is it possible to run a Discoverer report directly if I have the report link? Or everytime I run I must enter the schema username and password?
Please advise.
Thank you.

Hi
With regards to question 1, I don't believe this is possible any more. The older versions were rather flexible in that approach but sadly, no more.
With regards to question 2, using a VPD you can authenticate to your heart's content using any custom defined table you wish. This is just an out of the box idea, and I don't know whether it will work, but here goes.
The table that stores public connections is this one: orasso.wwsso_psex_user_info$
I am wondering what would happen if we put a restriction on SELECT from that table to not allow selection if the SSO user was not of a certain class or did not have a certain privilege.
Would anyone else care to comment here?
By the way, inside SQL, this code SYS_CONTEXT('USERENV', 'CLIENT_IDENTIFIER') will return the SSO user.
For more info on public connections, look here: http://download-west.oracle.com/docs/html/B13918_03/conns.htm#i1016752
Best wishes
Michael

Add fields to the standard report QM15

i want to add fields to the standard report.
t.code QM15 which display the list of items: selection of notifications.
the fields i want to add are:
1. batch no
2. Sample no
3. Main vendor
please let me know how can i do this. if any one can help me with screenshot doc. this is really helpful.
Thanks

Hi experts,
I have done with the z** creation of the standard report. I also create the z*include for the standard includes which are in the standard program. But I not able to find the fieldcatlog or include where I can add my new fields.
But I tried with one structure tht is standard structure in tht standard report so i make it as z*structure and I append my new fields to this structure. I debug the report and this works fine and also shows output, but at output when I change the layout to see these new fields it shows dump.
Then I tried with one more thing to give the positioning to my new added fields. (This is what u can say column positioning ).
When I execute this,it goes to dump screen.
Now I don't what to do with this.
If any one like to see the code. Plz let me know I will post the code.
Or if any one have any document on this plz share. Or any other solution.
Thanks in advance.
Thanks
Sachin

Need to add $ symbol in the amount column

Hi All,
i need to add a $ symbol in one of the value column in my SSRS Report.(SSRS 2008 R2).
But , the problem is $ should be Left Aligned and Value should be
right aligned. If the value is zero then also $ has to display as most left aligned as below "$ 0".
Can any one suggest me to get it done.
Thanks n advance.
bala krishna

Hi balakrishna141,
Based on your description, you want to add a “$” together with the Amount in one textbox, The”$” align to the most left of the textbox and the Amount align to the most right of the textbox, right?
I have tested on my local environment and find there is some limitation of using the HTML and as you mentioned that the solution provided by Visakh16 have some little problem, so ,we can use another method by creating an rectangle(The rectangle should be
the same size as the cell of the table) and put two textboxes (TextBox1 to put the value of “$”,TextBox2 to put the value of Amount) in it and replace the [Amount] TextBox with this rectangle, then set the properties of both TextBox(TextBox1:TextAlign=Left,
TextBox2:TextAlign=right)
Details steps below for your reference:
Create an rectangle and place 2 textboxes inside a rectangle
In the first text, put the $ and right align it
In the second textbox, put the value of amount and left align it
Make sure that the width of the first textbox1 is less as it just has to accommodate the $ symbol and give more width for the second textbox2 of amount
Similar thread are for your reference:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/66d91599-d186-46f2-be03-5278612e6c91/right-align-dollar-sign-with-left-justified-number-in-ssrs-2005-matrix-report-column-?forum=sqlreportingservices
If you still have any question, please feel free to ask.
Regards
Vicky Liu

Using Both BW and R/3 Tables in the same report

I am very new to Crystal and I have a requirement that involves data that is contained in both R/3 tables and BW. Basically it is a series of report sections (17 total) with 14 being from R/3 tables and 3 coming from BW). My first question is it even possible to combine two different data sources like that in Crystal? Second question is if it is is the best solution to create a master container report and add all of the sections as subreports. If so how do I link the BW and R/3 subreports together.?
Thanks in advance for any help.
Andy

hey Andy,
you can indeed combine data sources. you can even throw non SAP datasources in there as well.
however, as a warning, when you combine and then link disparate datasources in this manner, you are going to have very reduced performance...this is because all of the applicable records from each data set have to come back into cr and this will take up a lot of time and memory.
as you suggested, a subreport is best.
you could have your main report run off of your R3 connection and a subreport run off of BW. if you have a common field, like an ID field, you can use subreport linking on this field from the main R3 report to the BW report.
jw
Edited by: Jamie Wiseman on Dec 16, 2009 4:13 PM

Need to add extra field in BEX report

Hi Experts ,
I have a problem in bex report.
scenario is like this--
APD will generate the BPS Daily report on Branch, Group, Area, Region and total company levels and then exports into a flat files stored in appserver
and i got the requirement to change the layout of the report. The client wants to need the one field extra ie. 'REPORTS RUN DATE '
and i am stuck here how to add this field in my report ..
Please help me ASAP.
Thanks a lot in advance
Saurabh

hi,
Enhance your APD and in the target add field REPORTS RUN DATE .
Fill this using ABAP routine which populates the sy-datum in this field.
regards,
Arvind.

Can you add comments to the XML reports other than one Block Comment and one Test Comment?

I know how to use Block Comments and Test Comments but if I need to add more comments to my XML report in a test other than one Test comment, is there a way to do this? In other words, I would like to be able to add say 5 comment lines for a single test. Also, can a Test Comment or Block comment be more than one line in length? If so, how do you do that?

What version of TS do you have? If you have 4.1 or better (might be possible in 4.0 I can't remember) you can just use the additional results. So in the step properties you will see Additional Results. Then just add as many as you want.
Then you will see it show up in the report like you want. I couldn't get multiple lines to work in one comment. I tried \n but that didn't seem to be supported here.
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~
Attachments:
StepComments.JPG ‏38 KB

Mail from RVADOR01 need to add body of the mail

Hi Experts,
How to add mail body for the below case?please look
I am using output tupe Zmail attached to Program ZRVADOR01 and script form ZRVORDER01.
The Program ZRVADOR01 and the script ZRVORDER01are copied from standard prog RVADOR01 and standard script RVORDER01.
And this output type is attached to VA02.
In the Zprogram i could able to give mail subject in OPEN_FORM function module in OPTIONS parameter.
And i am sending to the exterid which is outlook.
For giving the email id i have added some code from the note .357137 before calling the OPEN_FORM function module in the program..
mail is coming with subject line and attachment of script document .
But the only thing needed is , add body text for the mail.
How can i do this?
Regards
Ramakrishna

Hi Rama, I am trying to do the same and noticed that your comments/question appears as "ANSWERED" at the top of the thread.
Were you able to accomplish this?
Jacob

Adobe Premiere Elements 12: Add Media Failure: The Importer Reported a Generic Error

I am trying to add a MOV file to PE 12 I and keep recieving and Add Media Failure Error stating "The Importer Reported a Generic Error". I have added other MOV files without any issue so I don't know why some MOV will work and others won't. The only common characteristic I've found is that the MOV files that won't work are files that were recorded with my SLR camera. The location of the files I've added/tried adding are on my external hard drive.

bunzondarun
Try importing a few of the problematic files from a Local Disc C location like Videos and determine if problem presists. How is the external hard drive formatted, NTFS or FAT32?
Do you have the latest version of QuickTime installed on your computer with Premiere Elements 12? And, on what computer operating system is Premiere Elements 12 running? Are you running QuickTime and Premiere Elements 12 as Run As Administrator and/or from a User Account with Administrative Privileges?
What specifically is the video compression for the problematic files? And, what is the brand/model/settings for the camera that is recording these videos?
More later.
ATR

Problem with the sames tables in the same report

Hi friends,
         I have a report with the same table twice. One with the original name (Company) and the second with alias (Company_A). This report wants to show a "tree" of companies. With code I get a Dataset    and I fill the report with it. This Dataset    have two tables the original and the alias table with one and two rows expletively. The data is correct is what we expect that the report will show but this not occurs. He only see the rows of the original table and if you get more than one row in it he try a Cartesian product and we see invalid results. Can I fill the report with the correct rows to show in the report? Is there any other possibility? To help I put an example:
Fields of table Company as original table in the report: Company.
Fields of table Company as alias table (Company_A) in the report: Company and OriginCompany.
There is a relation between Company and Company_A through the field Company (original alias) and OriginCompany (alias table).
The dataset    is like this:
Table Company: one row --> Company1.
Table Company_A: two rows --> Company1a, Company.
                                               Company2a, Company.
Then the report only shows the rows of the original table Company but no trace of the alias table Company_A
If someone can help me thanks and if not also!!!
Edited by: JuliaRomero on Jun 1, 2009 4:30 PM

Use two connections not one when you are embedding one result set in another.
If you are embedding one in the other also consider using a join which is faster and requires less code.

I need to add tab in the existing B1 scree

Hai,
I need to add two more additional tab in the production order screen. Please let me know how can i do this.
regards
Suresh S

Hai,
Thanks for you reply. I have gone through the example what you have suggested. Please let me know how i can add the item for production order.
eg,
   For Sales Order it has been mentioned as 126. How can i identiy these 126
        '// use an existing item to place youe item on the form
        oItem = oOrderForm.Items.Item("126")
For Sales Order it has been mentioned as 44. How can i identiy these 44
'// use an existing item to place youe item on the form
        oItem = oOrderForm.Items.Item("44")
And Form type :
FormType = 139
how following numbers can be identified for Production Order Form

I need to add header in the WAD

Hi All,
I have a requirement of adding header in WAD/Bex,were there are 8 Columns to be displayed in the report as below
Response time Resolution Time
Min
Max
Average
SD
Min
Max
Average
SD
Were in Respone time time and Resolution time are Key figures.
Min,Max,Average,Standard Deviation(SD)are calculated Keyfigures in Bex query designer.
Now I have displayed each of these 8 columns as Min of Respone time | Max of Response time and so which needs to scroll to right a lot users wants the header to be diplayed as above example.
Can please anyone guide me on this,is it possible in WAD or Bex?
Thanks in advance
Preethi.

Hi Preethimanj,
We can acheive this through BEx and WAD combination.
1. We need to creat two queries with different set of CKF.. one is for Response time and other is for Resoultion time.
2. In WAD use the web item TABLE with two rows and two columns., on the first row keep the headings Response time and Resolution time then on the second row keep the two queries Response time and Resoultion time respectively. ( I think you are getting my point).
In this we can achieve this .
Hope this helps.
Veerendra.

How to add link in the ALV report?

Hi ,
Now, I want to turn to a t-code (e.x. Va03) after double click column for order of ALV report.
Is it possible? what i should do?
Thanl you all~

Yes , it is Possible in ALV .
From the Sales order Field (VBLEN) in the Basic List to Sales Order Display TrascationCode : (VA03).
Here is the Sample code for Purchase Order Display .
REPORT zdemo_alvgrid                 .
TABLES:     ekko.
type-pools: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
      gd_tab_group type slis_t_sp_group_alv,
      gd_layout    type slis_layout_alv,
      gd_repid     like sy-repid,
      gt_events     type slis_t_event,
      gd_prntparams type slis_print_alv.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform build_events.
perform build_print_params.
perform display_alv_report.
*&      Form BUILD_FIELDCATALOG
      Build Fieldcatalog for ALV Report
form build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
              I.e. Field type may be required in-order for
                   the 'TOTAL' function to work.
fieldcatalog-fieldname   = 'EBELN'.
fieldcatalog-seltext_m   = 'Purchase Order'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
fieldcatalog-do_sum      = 'X'.
fieldcatalog-no_zero     = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'EBELP'.
fieldcatalog-seltext_m   = 'PO Item'.
fieldcatalog-col_pos     = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'STATU'.
fieldcatalog-seltext_m   = 'Status'.
fieldcatalog-col_pos     = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'AEDAT'.
fieldcatalog-seltext_m   = 'Item change date'.
fieldcatalog-col_pos     = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MATNR'.
fieldcatalog-seltext_m   = 'Material Number'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MENGE'.
fieldcatalog-seltext_m   = 'PO quantity'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MEINS'.
fieldcatalog-seltext_m   = 'Order Unit'.
fieldcatalog-col_pos     = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-do_sum      = 'X'.
fieldcatalog-datatype     = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PEINH'.
fieldcatalog-seltext_m   = 'Price Unit'.
fieldcatalog-col_pos     = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
      Build layout for ALV grid report
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
gd_layout-totals_only        = 'X'.
gd_layout-f2code            = 'DISP'. "Sets fcode for when double
                                        "click(press f2)
gd_layout-zebra             = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text       = 'helllllo'.
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
      Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_callback_top_of_page   = 'TOP-OF-PAGE' "see FORM
            i_callback_user_command = 'USER_COMMAND'
           i_grid_title           = outtext
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
           it_special_groups       = gd_tabgroup
            it_events               = gt_events
            is_print                = gd_prntparams
            i_save                  = 'X'
           is_variant              = z_template
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform.                    " DATA_RETRIEVAL
Form TOP-OF-PAGE                                                 *
ALV Report Header                                                 *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
      wa_header type slis_listheader,
      t_line like wa_header-info,
      ld_lines type i,
      ld_linesc(10) type c.
Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
               sy-datum+4(2) '.'
               sy-datum(4) INTO wa_header-info.   "todays date
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
                    into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            it_list_commentary = t_header.
           i_logo             = 'Z_LOGO'.
endform.
      FORM USER_COMMAND                                          *
      --> R_UCOMM                                                *
      --> RS_SELFIELD                                            *
FORM user_command USING r_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
    WHEN '&IC1'.
Check field clicked on within ALVgrid report
    IF rs_selfield-fieldname = 'EBELN'.
    Read data table, using index of row user clicked on
      READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
    Set parameter ID for transaction screen field
      SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
    Sxecute transaction ME23N, and skip initial data entry screen
      CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
    ENDIF.
ENDCASE.
ENDFORM.
*&      Form BUILD_EVENTS
      Build events table
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
       exporting
            i_list_type = 0
       importing
            et_events   = gt_events[].
read table gt_events with key name = slis_ev_end_of_page
                           into ls_event.
if sy-subrc = 0.
    move 'END_OF_PAGE' to ls_event-form.
    append ls_event to gt_events.
endif.
    read table gt_events with key name = slis_ev_end_of_list
                           into ls_event.
if sy-subrc = 0.
    move 'END_OF_LIST' to ls_event-form.
    append ls_event to gt_events.
endif.
endform.                    " BUILD_EVENTS
*&      Form BUILD_PRINT_PARAMS
      Setup print parameters
form build_print_params.
gd_prntparams-reserve_lines = '3'.   "Lines reserved for footer
gd_prntparams-no_coverpage = 'X'.
endform.                    " BUILD_PRINT_PARAMS
*&      Form END_OF_PAGE
form END_OF_PAGE.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
*&      Form END_OF_LIST
form END_OF_LIST.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
Reward Points if it is usefull,,,
Girish

Need to add tab in the me21 and the fields to that tab

i have one requirement i which i have to add one tab in the PO thru me21n and that tab is to be placed after the shipping tab.i have to add then the user input fields to it.please suggest me how to find that include,will it be screen exit that i need to create.do i require the access key from SAP for this.
kindly suggest.
thnaks

These are following exits .
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MFAB001 User exit for generation of release order
RFLB001 Control Items for Contract Release Order
MPL0001 User subscreen for additional data on AMPL
Also some of them you can find thru transaction SPRO going into Purchase Order->System Modifications .

Need to add tables in the pricing report(V/LB)

Similar Messages

Maybe you are looking for