I need to add tab in the existing B1 scree

Hai,
  I need to add two more additional tab in the production order screen. Please let me know how can i do this.
regards
Suresh S

Hai,
Thanks for you reply. I have gone through the example what you have suggested. Please let me know how i can add the item for production order.
eg,
   For Sales Order it has been mentioned as  126. How can i identiy these 126
        '// use an existing item to place youe item on the form
        oItem = oOrderForm.Items.Item("126")
For Sales Order it has been mentioned as 44. How can i identiy these 44
'// use an existing item to place youe item on the form
        oItem = oOrderForm.Items.Item("44")
And Form type :
FormType = 139
how following numbers can be identified for Production Order Form

Similar Messages

  • Need to add tab in the me21 and the fields to that tab

    i have one requirement i which i have to  add one tab in the PO thru me21n and that tab is to be placed after the shipping tab.i have to add then the user input fields to it.please suggest me how to find that include,will it be screen exit that i need to create.do i require the access key from SAP for this.
    kindly suggest.
    thnaks

    These are following exits .
    LMEDR001 Enhancements to print program
    LMELA002 Adopt batch no. from shipping notification when posting a GR
    LMELA010 Inbound shipping notification: Transfer item data from IDOC
    LMEQR001 User exit for source determination
    LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
    LWSUS001 Customer-Specific Source Determination in Retail
    M06B0001 Role determination for purchase requisition release
    M06B0002 Changes to comm. structure for purchase requisition release
    M06B0003 Number range and document number
    M06B0004 Number range and document number
    M06B0005 Changes to comm. structure for overall release of requisn.
    M06E0004 Changes to communication structure for release purch. doc.
    M06E0005 Role determination for release of purchasing documents
    ME590001 Grouping of requsitions for PO split in ME59
    MEETA001 Define schedule line type (backlog, immed. req., preview)
    MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
    MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
    MEQUERY1 Enhancement to Document Overview ME21N/ME51N
    MEVME001 WE default quantity calc. and over/ underdelivery tolerance
    MM06E001 User exits for EDI inbound and outbound purchasing documents
    MM06E003 Number range and document number
    MM06E004 Control import data screens in purchase order
    MM06E005 Customer fields in purchasing document
    MM06E007 Change document for requisitions upon conversion into PO
    MM06E008 Monitoring of contr. target value in case of release orders
    MM06E009 Relevant texts for "Texts exist" indicator
    MM06E010 Field selection for vendor address
    MMAL0001 ALE source list distribution: Outbound processing
    MMAL0002 ALE source list distribution: Inbound processing
    MMAL0003 ALE purcasing info record distribution: Outbound processing
    MMAL0004 ALE purchasing info record distribution: Inbound processing
    MMDA0001 Default delivery addresses
    MFAB001 User exit for generation of release order
    RFLB001 Control Items for Contract Release Order
    MPL0001 User subscreen for additional data on AMPL
    Also some of them you can find thru transaction SPRO going into Purchase Order->System Modifications .

  • How to add tabs in the top level navigation

    Hi,
    We are using EP 6.0 sp2 and patch 39, kindly suggest how to add additional tabs to the existing tabs on the top level navigation.
    Swetha

    Hi Swetha,
    Please have a look on following links,
    http://help.sap.com/saphelp_nw2004s/helpdata/en/cc/1f6f3ee3c33f7ce10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/4e/3e703e632c7937e10000000a114084/frameset.htm
    Regards,
    Vishal

  • Need to add tables in the pricing report(V/LB)

    Hi
    I want to add some table in the existing pricing report.But I am unable to do so.
    My requirement was to add some new selection field in the Pricing report which is possible by adding the table in the existing pricing report.
    But I found If I go to EDIT>Tables.there is one option is called  "add table" which is appearing grey.
    Can you found it the way to add the tables in the Pricing report.

    Hi Sumit,
    You cannot add anything to existing report - you need to create new one and there you will be able to choose more tables than you use now.
    Regards,
    Marcin

  • Screen enhancement : addition of TAB to the existing tabs through SPRO

    Hello,
    Can you please give me the stuff related to the screen modification (SAP STANDARD) ,WHERE i need to add one tab to the existign tabstrip and then i have to add n number of fields under that tab .
    How to accomplish the same using SPRO .
    urgent
    thanks
    Hello Gurus Anykind of help and suggestions would be greatfull .....
    Message was edited by:
            shishupalreddy ramreddy

    Hi,
    You can find exits using the following code:
    REPORT  zrmexitfinder                               .
    TABLES: modsap, modact, tstc.
    PARAMETERS: input1 LIKE tstc-tcode DEFAULT ' ',
                input2 LIKE modsap-typ DEFAULT ' '.
    DATA: search1(6),
          search2(3),
          search3 LIKE modsap-member.
    DATA : first_row VALUE 'Y'.
    CONCATENATE: '%' input1 '%' INTO search1,
    '%' input2 INTO search2.
    SELECT * FROM tstc WHERE tcode LIKE search1.
      first_row = 'Y'.
      CHECK tstc-pgmna NE space.
      CONCATENATE '%' tstc-pgmna '%' INTO search3.
      SELECT * FROM modsap WHERE typ LIKE search2
      AND member LIKE search3.
        SELECT SINGLE * FROM modact WHERE member = modsap-name.
        IF first_row EQ 'Y'.
          WRITE: /0 tstc-tcode, 6 tstc-pgmna, 16 modsap-name, 32 modsap-typ,
                 45 modsap-member, 70 modact-name.
          first_row = 'N'.
        ELSE.
          WRITE: /16 modsap-name, 32 modsap-typ, 45 modsap-member, 70 modact-name.
        ENDIF.
        CLEAR : modsap, modact.
      ENDSELECT.
      IF sy-subrc NE 0.
        WRITE : /0 tstc-tcode, 6 tstc-pgmna, 30 'No exits found'.
      ENDIF.
      CLEAR tstc.
    ENDSELECT.
    END-OF-SELECTION.
      CLEAR: search1, search2, search3.
    Hope this helps. Input just the transaction. This can be used for your later requirements also.
    Regards,
    Renjith Michael.

  • Add columns in the existing Customer table in a Subject Area

    Hi All,
    Well I need to add two columns from Sales table(new table i created which has customer Id) and join it to the Customer Table which has the Customer Id and several columns. The Customer table was already in the RPD which has all the customer information. Now that i have this new requirement to add few columns from the Sales table to the Customer table in one Subject Area.
    What i have done so far is that I imported the sales table into the rpd, made a join in PHYSICAL LAYER on the customer ID of the Sales table to the Customer id of the Customer table and simply dragged the sales table to the Customer LTS in the BMM layer(NO MORE JOINS IN BMM)and dragged and dropped the same into the Presentation layer. The customer table is linked to one fact table in that subject area. So i thought that dragging the sales table columns in the customer table LTS will work because customer is linked to one fact in that subject area.
    Now, In the Answers when I dragged columns from customer & sales table I see only one record that is the first customer_id record from my Sales table but i know there are many common customer_ids between those two tables but its only picking the first customer id from the sales table.
    Any help will be appreciated..
    Normally if we need to add some columns to the existing tables in one subject area what is the best approach??

    Hi Balajee,
    SAPMM06E 0111 CUSTSCR1 SAPLXM06 0111 Subscreen: PO item
    for more information check with these links
    ADDING NEW FIELDS IN me21n
    ADDING NEW FIELDS IN me21n - (Screen exit / enhancment)
    hope this will useful to you.
    Regards!

  • Need to add new InfoObject to existing target

    Hi,
    I need to add one extra InfoObject to my existing cube. Data is coming from r/3 can please detailed me the procedure..
    r/3 side enhancements and BW side enhancement in details.
    regards,
    Silpa

    Hi Silpa,
    Before adding the field into existing info cube fiirst u need to check in R/3 the field is properly enhanced  or and data is populated or not
    In R/3 side if u enhance any field that will avialble on field only known exit or inversion check in data source make that field seletion properly.
    After that u need to check in RSA3 check the data.
    After Replicate u r data source.
    Once it is completed in R/3 come to BW
    U need add the compateble field in transferstructure structure and CS also.
    To load the new field data u need to delete the existing data in cube level.
    And go for Re-init.
    Hope this will help.
    Regards,
    HARI GUPTA

  • Add data to the existing data

    Hi,
    I created a new table with columns sno,sname,subjects in it.
    I inserted the data into the table as below...
    sno     sname     subjects
    100     Satya     Computers,Electronics,Data Structres
    101     Dave     Computers,Civil,Informatics
    102     John     Computers,Commerce
    Now I need to add one more subject(Mechanical) to the subjects column.....
    ex:Computers,Electronics,Data Structres,Mechanical
    Computers,Civil,Informatics,Mechanical
    Computers,Commerce,Mechanical
    Can anyone please suggest how I can add a new subject in the existing data...
    Thanks in advance

    user11048416 wrote:
    Hi,
    I created a new table with columns sno,sname,subjects in it.
    I inserted the data into the table as below...
    sno     sname     subjects
    100     Satya     Computers,Electronics,Data Structres
    101     Dave     Computers,Civil,Informatics
    102     John     Computers,Commerce
    Now I need to add one more subject(Mechanical) to the subjects column.....
    ex:Computers,Electronics,Data Structres,Mechanical
    Computers,Civil,Informatics,Mechanical
    Computers,Commerce,Mechanical
    Can anyone please suggest how I can add a new subject in the existing data...
    Thanks in advanceIt fails even the first normal form which says each attribute of a column should be atomic...
    May be you should go for redesigning the table structure if possible or else there is huge possibility of update,insert and delete anomalies.
    Ravi Kumar

  • Mail from RVADOR01 need to add body of the mail

    Hi Experts,
    How to add mail body for the below case?please look
    I am using output tupe Zmail attached to Program ZRVADOR01 and script form ZRVORDER01.
    The Program ZRVADOR01 and the script ZRVORDER01are copied from standard prog RVADOR01  and standard script RVORDER01.
    And this output type is attached to VA02.
    In the Zprogram i could able to give mail subject in OPEN_FORM function module in OPTIONS parameter.
    And i am sending to the exterid which is outlook.
    For giving the email id i have added some code from the note .357137 before calling the OPEN_FORM function module in the program..
    mail is coming with subject line and attachment of script document .
    But the only thing needed is , add body text for the mail.
    How can i do this?
    Regards
    Ramakrishna

    Hi Rama, I am trying to do the same and noticed that your comments/question appears as "ANSWERED" at the top of the thread.
    Were you able to accomplish this?
    Jacob

  • Need to add field in the standard screen

    Hi
    As per my requirementn  we have to add one field in the Material master(MM01/MM02). Mentioned path below.
    MM01/MM02)-->  MRP1 tab --> in the MRP areas > click on MRP AREAS button>Pop will come with MRP AREA --> double cleck on entry > MRP area screen will appear> In general data tab> MRP group field is availble> Beside that i have to add one field.
    Program Name--> SAPLMD_MGD1
    Screen --> 0030
    As it is separate pop kind screen not sure whether we can add or not. Please let me know if there is any chance to add the field with procedure.
    Regards
    Raj.

    hi
    For this you have to find the screen EXITS.
    GOTO MM01->click on SYSTEM->then STATUS mow click on the program and find our the package name.
    NOW GOTO -> se84 ->click on ENHANCEMENT-> give the package name here and EXECUTE you find all the EXITs.
    hope this helps
    Regards
    Ritesh

  • How to add tags to the existing XML file?

    Hi,
    I have a requirement wherein I have to add a tag to the existing xml data.
    For Eg:
    <ROW>
    <EVNT_ID>7333976</EVNT_ID>
    <DISTRCT_CD>67</DISTRCT_CD>
    <TIME_OFF>06-May-2008 10:50:04 AM</TIME_OFF>
    </ROW>
    The desired output is,
    <DI_DATA>
    <ROW>
    <EVNT_ID>7333976</EVNT_ID>
    <DISTRCT_CD>67</DISTRCT_CD>
    <TIME_OFF>06-May-2008 10:50:04 AM</TIME_OFF>
    </ROW>
    </DI_DATA>
    I have to add <DI_DATA> </DI_DATA>at the start and end of the input.
    Could any of you help me on this?
    Thanks,
    GV

    If your XML is just in a CLOB, you can just use string manipulation to prepend/append the nodes on. If you have it in an XMLType you could just do the following
    select appendchildxml(XMLTYPE('<DI_DATA/>'),
                                  'DI_DATA',
                                  XMLTYPE('<ROW>
    <EVNT_ID>7333976</EVNT_ID>
    <DISTRCT_CD>67</DISTRCT_CD>
    <TIME_OFF>06-May-2008 10:50:04 AM</TIME_OFF>
    </ROW>'))  -- this would be your variable
      from dual;which will put your data within the DI_DATA node.

  • Need to Add a Table in Existing Query(SQVI)

    Hello All,
    I have a query zqry (in T-Code SQVI) using 2 tables mkpf & mseg, with some List Fields(Result) & some selection Fields(Select options).
    I need to add a new table makt into this existing query.
    Help is highly appriciated.
    Regards
    Arun.

    Hi Arun,
    look here:<a href="http://help.sap.com/saphelp_47x200/helpdata/en/b7/26dde8b1f311d295f40000e82de14a/frameset.htm">QuickViewer</a>
    and note: ...
    "Whenever you define a QuickView, you can specify its data source explicitly. Tables, database views, table joins, logical databases, and even InfoSets, can all serve as data sources for a QuickView. <b>You can only use additional tables and additional fields if you use an InfoSet</b> as a data source."...
    regards Andreas

  • How to hide a tab from the existing tabstrip of CRMD_BUS2000111 transaction

    I have to hide competitor tab from the tabstrip of CRMD_BUS2000111 transaction in CRM. I have tried shd0 but since this is not a dialog transaction we cannot create screen variant. After that I tried BUCO transaction.In BUCO I selected Sales Area data then competitors. But when I double click on compititors it is showing a message VCT control for screen configuration does not exist.
    I do not have much idea about BUCO. Can any one help me solving my problem?

    Friends
    With the following command you can register you .ocx ( Visual Buttons Control files ) in windows.
    REGSVR32 C:\Progra~1\SAP\FrontEnd\SAPgui\vistransmitter.ocx
    The above command will register said file in the registry and facilitate Visual Configurator Tool to run for Screen Sequence Modifications. With the above I also recommend Latest Patch (23), which is available with SAP to update on the windows frontend to avoid some other known frond end issues.
    Before doing all above make sure your have 2 files existence in the C:\Progra~1\SAP\FrontEnd\SAPgui folder
    Visu_se.exe
    vistransmitter.ocx
    Best Regards,
    Jaswant Purba
    [email protected]

  • How to add id to the existing Authorization Object

    Hi,
    I want to add one id to the existing Authorization Object,How to add this?
    Here is my Object and existing ID's
    authority-check object 'Z_W2WALL' for user sy-uname
              id 'ZFREEZE' field r_freeze
              id 'ZLI01' field r_li01
              id 'ZLI11' field r_li11
              id 'ZLI14' field r_li14
              id 'ZLI11R' field r_li11n
              id 'ZLI20' field r_li20
              id 'ZMI10' field r_mi10
              id 'ZUPLOAD' field r_upload
              id 'Z_ARTFRZ' field r_artfrz.
    Now for this i want to add
      id 'Z_BIN' field r_frz.
    How to do this?
    Thanks

    Hi Sai,
    as there are already defined other id's have been added, you could also do the same way
    but this will also done through your basis end, where for this id your basis team will provide the
    authority to this id for the same purpose..
    authority-check object 'Z_W2WALL' for user sy-uname
              id 'ZFREEZE' field r_freeze
              id 'ZLI01' field r_li01
              id 'ZLI11' field r_li11
              id 'ZLI14' field r_li14
              id 'ZLI11R' field r_li11n
              id 'ZLI20' field r_li20
              id 'ZMI10' field r_mi10
              id 'Z_BIN' field r_frz
              id 'ZUPLOAD' field r_upload
              id 'Z_ARTFRZ' field r_artfrz.

  • Need to add $ symbol in the amount column

    Hi All,
    i need to add a $ symbol in one of the value column in my SSRS Report.(SSRS 2008 R2).
    But , the problem is $ should be Left Aligned and Value should be
    right aligned.  If the value is zero then also $ has to display as most left aligned as below "$                0".
    Can any one suggest me to get it done.
    Thanks n advance.
    bala krishna

    Hi balakrishna141,
    Based on your description, you want to add a “$” together with the Amount in one textbox, The”$” align to the most left of the textbox and the Amount align to the most right of the textbox, right?
    I have tested on my local environment and find there is some limitation of using the HTML and as you mentioned that the solution provided by Visakh16 have some little problem, so ,we can use another method by creating an rectangle(The rectangle should be
    the same size as the cell of the table) and put two textboxes (TextBox1 to put the value of “$”,TextBox2 to put the value of Amount) in it and replace the [Amount] TextBox with this rectangle, then set the properties of both TextBox(TextBox1:TextAlign=Left,
    TextBox2:TextAlign=right)
    Details steps below for your reference:
    Create an rectangle and place 2 textboxes inside a rectangle
    In the first text, put the $ and right align it
    In the second textbox, put the value of amount and left align it
    Make sure that the width of the first textbox1 is less as it just has to accommodate the $ symbol and give more width for the second textbox2 of amount
    Similar thread are for your reference:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/66d91599-d186-46f2-be03-5278612e6c91/right-align-dollar-sign-with-left-justified-number-in-ssrs-2005-matrix-report-column-?forum=sqlreportingservices
    If you still have any question, please feel free to ask.
    Regards
    Vicky Liu

Maybe you are looking for