Need to change the lenth of data element WRBTR in Idoc FIDCCP01.

Hi All,
In my program i am doing a amount calculation and storing it in variable of data type BSIS-WRBTR. The same i am passing to a Idoc segment FIDCCP01 which alos uses the same data type. WRBTR has alenth of (13,2).
My calculation are crossing the desired limit of this data type. So i would like to change the Data elemet WRBTR used in IDOC segment.
Can any one guide me in how to do this.
Thanks,
Ravi Kasnale.

Hi mr  Bhagath.
the only options where i can get the IDOC Number is as shown in the below attached screen s .
Varma
iam not sure of where i can get the IDOC number  and implement the code,the only area where i could get the IDOC number is at the higlited square  block where i explained that i can get but i am not able to write any code there as SAP is not allowing me .
hope to get the best answer from you.
regards.
Varma

Similar Messages

  • Change the description of standard element

    Hi,
       I need to change the description of (VBAP-MVGR1 'Material Group 1') field, which system is using in Transaction Code VA01,VA02 & VA03  (Additional data as per item level).  Pls suggest me how to change it's description. Clients wants to add his own description here.
      Should i change the description of data element directly with access key?
      pls suggest.
    Thanks in advance.
    Pradeep

    Hi,
    gothrough this, it will help you..
    Creating Your Own Keywords and Short Texts
    You can use the enhancement concept to create your own keywords for data elements stored in the ABAP Dictionary. The system uses keywords on screens to identify entry fields. Data elements can have up to three keywords of varying lengths.
    The data element BBBNR, for example, identifies the first part of a customer’s international company number. The standard keywords for this data element in the ABAP Dictionary are:
    Company no. 1
    Comp. no.1
    Company number 1
    You might want to change these keywords to reflect your company’s own terminology. Instead of ‘Company number 1,’ you might want to identify the field as ‘Corporate ID.’ If you change the keywords using the enhancement concept, your new texts will appear in all SAP screens where any field directly refers to the data element your altered. If SAP deliberately modifies a keyword on a standard screen, direct reference to the original data element is dissolved. Any changes you make to a keyword with the enhancement concept will not appear in standard screens that do not retain a direct reference to the modifed data element.
    You can identify such screen-specific modifications by looking in the Screen Painter. Display the field’s screen attributes and examine the field Modific. If an ‘x’ appears, the SAP developer modified the data element’s key word. Your own keyword will not appear.
    The enhancement concept also allows you to alter a data element’s short description (short text). This brief text appears whenever a user calls up online help for that field with F1 . To create your own keyword and short text documentation, proceed as follows:
    Enter the Project management transaction by choosing Utilities ® Enhancements ® Project management from the ABAP Workbench menu
    Choose Text enhancements ® Key words ® Change.
    The system displays a dialog box.
    Enter the name of data element.
    If you want to see a list of all the screens where this data element appears, choose Ref. to screen before proceeding to the next step. The reference list shows you how many standard R/3 screens your new documentation will affect.
    Choose Change from the application toolbar.
    Edit the data element’s keywords and short text.
    Save your changes.
    If you want to list all the data elements in your system that you have created customer-specific key words for, return to the main screen of the Project management transaction and choose Text enhancements ® Key words ® Display. The system displays all altered data elements and shows which changes were made.
    Restoring SAP and Customer Versions
    At some point you may want to restore all standard SAP keywords and short texts for data elements that you may have altered. You can restore the standard texts from the main screen of the Project management transaction. Choose Text enhancements ® Key words ® Restore SAP version. Specify the SAP release from which the texts are to be restored.
    The restoration function is carried out by a special program that runs in the background. This program goes through all data elements in your SAP System and restores the standard texts where required.
    Creating Your Own Online Documentation
    The enhancement concept allows you to create your own online documentation for all data elements in the ABAP Dictionary. The system displays this documentation whenever a user chooses F1 to get more information about a screen field.
    The standard documentation for the R/3 data element BBBNR reads: ‘Here, you enter the first 7 digits of the international location number’. You can enhance this documentation with additional information that your users may need. To write your own field documentation, proceed as follows:
    Call the Project management transaction by choosing Utilities ® Enhancements ® Project management from the ABAP Workbench menu.
    Choose Text enhancements ® Data elements ® New DE cust. docu.
    The system displays a dialog box.
    Specify the data element’s name.
    If you want to see a list of all the screens where this data element appears, choose Ref. to screen before proceeding to the next step. The reference list shows you how many standard R/3 screens your new documentation will affect.
    Choose Change from the application toolbar.
    On the next screen, ensure that the checkbox labelled Make available SAP documentation in the form of an INCL is activated.
    Choose Create.
    Write your own documentation.
    Save your changes.
    -suresh

  • How to change the schedule line date in SO with reference to value contract

    Hi SD Guru's,
    I need to change the schedule line date in the sales order with reference to the value contract by using some algorithm that i will write. The problem that i can't find the suitable place to add the algorithm. I can't add it to the Copy control because there is no schedule lines in value contract and copy control for schedule lines does no exist.
    I can not add to user exit MV45AFZZ  , because order that was created with reference to the value contract, does not go through this user exit.
    Do you have some ideas where i can add it?
    Thanks and Regards
    Viky
    Edited by: Viky Sloutsky on Oct 20, 2010 12:43 PM

    Hello Viky
    How about using program MV45AFZB- USEREXIT_CHECK_VBEP or USEREXIT_MOVE_FIELD_TO_VBEPKOM
    or program FV45EFZ1- USEREXIT_CHANGE_SALES_ORDER
    Does the program go through these exits when an order is created with ref to a value contract??
    Also I am wondering why you need to change a Schedule line determined by Availability check and/or delivery scheduling?

  • BAPI_PROCORD_CHANGE need to change GLTRS (scheduled finish date)

    Hello -
    I am writing a program where I need to change the scheduled finish date (field GLTRS) in a process order (transaction COR2).  I would like to use the bapi BAPI_PROCORD_CHANGE but it does not contain that field in the input structure. 
    Does anyone have any ideas how I can change that field without writing a BDC?  I am also curious to know why it was excluded from the bapi in the first place.
    Thanks!

    Hi Ferry,
    Thank you for your quick reply!
    That is very close to what I need, but it only updates GSTRS (scheduled start) and I need to update GLTRS (scheduled finish). 
    Can you think of any other suggestions?  I have also looked at BAPI_ALM_ORDER_MAINTAIN, but it doesn't have GSTRS as an input either, and doesn't seem to work for the order type I need.
    Thanks again,
    Susanna

  • Need to change the date of joining of employee

    Hi All,
    I have gone through some threads similar to this subject an also tried to do changes from PA41 but i am facing some problems during the procedure.
    We have transferred some employees to sap system with their original date of joining and payroll was run from some other date for those employees. So i need to change the date of joining of those employees.
    For example : Below is the line items of one employee from table infotype 0.
    End date Start date Changed on
    22.02.2009 19.02.2007 19.02.2009
    31.03.2009 23.02.2009 19.02.2009
    31.12.2009 01.04.2009 14.10.2009
    31.12.9999 01.01.2010 21.01.2010
    Payroll was run from Feb-09 onwards and i want put date of joining for this employee as 23.02.2009.
    I want to know which date i need to change??...When i am trying to change the first start date i.e. 19.02.2007 to my desired start date, but it is not allowing me to do that as end date is smaller.
    Please tell me how would i change the joining date of employee as 23.02.2009 ?.
    Thanks.

    Try this
    22.02.2009 19.02.2007
    31.03.2009 23.02.2009
    31.12.2009 01.04.2009
    31.12.9999 01.01.2010   take this record form PA30  IT0000 Over View (Shif +  F8)  Copy that record and change the Start date
    as 2302.2010  so  another record will be created
    22.02.2010    01.01.2010
    31.12.9999    23.02.2010
    Just try and let me know

  • CRM-ISU: Need to change the END date and Start Date for contract items

    Hi,
    There is an old contract item for which  I need to change the end date
    and there is a new contract item for which I need to change the start date.
    I need to change the contract item end date and start date using some function module in IS-U system (may be as RFC to CRM).Pleaselet me know if any body is ware of this functionality?
    I am aware of a FM EECRM_CONTRACT_DATE_CHANGE which may be used for changing End Date
    but how to change the start date of a new contract item?
    Please let me know if any body is aware of this?
    Thanks

    Hi,
    Hope you can solve it by this [Link1|Re: Function modules; [link2|CRM material;.
    Regards,
    Surjith

  • TS4148 I need to change the mobile data network from Vodafone to orange I need the passwords and address to do it my self

    I'm trying to find out the mobile data network info on my iPhone 3GS it's on Vodafone at the moment but I want to use my orange sim so I need to change the pan details help

    Assumption ...you are in UK
    If you purchased the iPhone from Vodafone it will be locked to them
    You will need to request they unlock the iPhone before you can use
    it on Orange no other way
    In UK  Apple are the ONLY source of unlocked new  iPhones

  • Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.

    Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • I need to change the sum of a column's total with javascript.

    Hi,
    The HTML output of a SUM column is as follows:
    <td align="center" headers="COST" class="t2data"><b> 827.49</b></td>
    I need to change the sum total with javascript.
    The initial loading of the page SUMs the DB values correctly. Then onchange JS for a couple of factors may change one items COST.
    When that one item's COST changes I need to reSUM the total with JS.
    I was trying the following.. I don't know JS to well.
         var tds = document.getElementsByTagName('td');
         for (var xtd in tds) {
         //alert('Here:'+xtd.headers);
         if (xtd.headers=="COST") {
         // you found the element, do what you need
         alert(xtd.innerHTML);
         After inserting the above code into my javascript is popups up
         my alert, "Here:undefined"
         and never hits the alert(xtd.innerHTML);

    Hi Ya'll,
    I got the following working. See any problems?
    headers=="COST" actually showed up in each row of the whole column, including the SUM. So it ended up being great so I could sum it in the JS.
    I had to change the column type to NUMBER from VARCHAR2 for the initial SUM to work, so adding any formating to the SQL was not good. It looks pretty much what Andy has though... I found a slight hesitation it it though.. I have to work out a bug that prints the old total instead of the first.
    var ltotal =0;
    var tds = document.getElementsByTagName('td');
    for (var k=0; k<tds.length; k++) {
    if (tds[k].headers=="COST") {
    var inputObjs= tds[k].getElementsByTagName('input');
    if(inputObjs.length>0) {
    for (var j=0;j<inputObjs.length;j++) {
    ltotal+= parseFloat(inputObjs[j].value);
    //alert(inputObjs[j].value);
    //alert(ltotal);
    }else{
    tds[k].innerHTML=ltotal;
    Message was edited by:
    changed i to k to avoid the italics
    Bill Carlisle

  • Need to change the sender of the workflow email using SPD 2010

    Hi,
    I got a requirement. I've created a SharePoint Designer 2010 workflow which will trigger an email. The sender of that email is default. I need to change the sender of email to some user's email address like [email protected]
    Can this be possible using SPD 2010. Please suggest.
    Thanks,
    Kunal

    not out-of-the-box.
    you would need to find a third party add-on to send the email. The SPDActivities codeplex project includes some email options that include specifying a sender, but focus on attachments... not sure what would happen if there was no attachment.
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • IPhoto changes the original creation date to 12/31/1969

    Hi folks, this is a problem I have been trying to resolve for a very long time.
    I have a large collection of pictures that I took with a Palm Zire 71 and Zire 72 going back to 2003. Every time I import the files with iPhoto (File > Import to Library), iPhoto changes the original creation dates of the jpgs to 12/31/1969. I have tried many different things... most recently I burned the files to a CD, confirmed that the original creation dates were still in tact, and tried importing with iPhoto right from the CD. I got the same result... all photos with the date 12/31/1969. All photos completely disorganized because of Palm's less than great file naming structure. I need to keep the creation dates intact for the iPhoto books I want to make with them, so changing the file names won't work as a solution. Even changing the files names to the creation dates plus a counter would be very difficult because it is over 1500 pictures. Does anyone else know of this problem and perhaps have a solution for it? Thanks!

    Thank you for the suggestion TD. But the Batch doesn't help in this case because so many of the photos were created on different days. I would still have to manually go into each of the creation dates and change them back to the original.
    That's just not feasible for 1500 files. iPhoto shouldn't be stripping the files of the creation dates at import to begin with. I'm hoping to find a way to get the import process to work properly for these files. The weird thing is that iPhoto doesn't seem to do this to files create on a more typical point and shoot camera,
    but only on these Palm files.

  • How can i change the sequence of text element in standard driver program ?

    Hi,
    can u tell me how can i change the sequence of text element in standard  sapscript driver program.. without making a zcopy of standard driver program.
    My problem is when MEDRUCK form is getting printed for PO print , header text is coming before item. But the requirement is to come it after item.So how cani do that without making the zcopy of  SAPLMEDRUCK program..Is there any enhancement point in SAPLMEDRUCK driver program..where i can put my customise code for changing the sequence of text element ?

    Hi,
        Just copy the MEDRUCK to ZMEDRUCK. No need to copy the driver program.
    1) SE71Menu > Utilities > COpy from Client
    MEDRUCK ->>Client 000
    New formname ZMEDRUCK
    2) Now open the ZMEDRUCK in DE language in SE71
    3) Menu > Utilities > Convert original Language
    Change DE  to EN, save and activate
    4) Now open the ZMEDRUCK in EN language
    5) Goto Pagewindows > Main window,
    Look for the HEADER text Text element, copy the whole code under this Text element just after the ITEM text Text element, and comment the HEADER text above.
    Now the Header text Text element will be below ITEM text only. This will full fill your requirment.
    Now goto NACE transaction and add the copied ZMEDRUCK to the EF application.
    Regards
    Bala Krishna

  • HT204161 I bought an IMac 27 on craigslist and I need to change the Apple registration to my name. How can I do it?

    I bought an IMac 27 on craigslist and I need to change the Apple registration to my name. How can I do it?

    Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
    The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
    How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
    1. If you don't own another Mac
    a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    2. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    3. Partition and install OS X
    a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the  Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    c. An unusual problem may arise if all the following conditions apply:
              OS X 10.7 or later was installed by the previous owner
              The startup volume was encrypted with FileVault
              You're booted in Recovery mode (that is, not from a 10.6 installation disc)
    In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
    d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    4. Other issues
    a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

  • Changing the ID on Photoshop Elements 10 and 9.

    Even tho' I use the Photoshop Elements 11 the most I still use the 10 and 9 and need to change the ID on both of them. Can someone help me?? I really need to use them since I only have the Revel on the min mode? HELP please!

    Sorry, but your problem isn't clear. In PSE 8, 9, and 10 there is no need to change any ID because there is nothing at all left to sign in to. Photoshop.com is dead and gone and nothing you do will make it possible to use Revel from within PSE. You can use Revel, sure, but you do that with a browser or, if you have a mac, with the free app from the mac app store. But older versions of PSE don't understand anything about Revel.
    Just don't use the welcome screen anymore. Make a direct desktop shortcut or dock icon for the .exe file/application instead.

  • I am new to this I am trying to do something very simple.  I need to change the background color to

    I need to change the background color of a photo to white and then shrink the head of a photo for a passport and make the picture output a 2x2.
    Can someone help.  Thx

    Here are the requirements for US passport. Scroll down for the passport tool to make the picture utilizing one on your disk.
    http://travel.state.gov/passport/pptphotoreq/pptphotoreq_5333.html
    If you decide to make it in Elements and print it, you should have a resolution of 240-300 px/in for a good output.  I suggest that you print the 2 photos on good quality paper, probably both on 4x6 stock, and trim with scissors to specification.
    Open your picture and go to Image>resize>picture size, and check the resolution. If it is less than 240 px/in, enter 240 in the field and see if the dimensions remain adequate. If not, you may have to resize.
    Use one of the selection tool, e.g. lasso tool, or selection brush tool, to select head and shoulders
    Go to Edit>copy to put the selection on the clipboard
    Open a new, blank file (File>new>blank file) 2.25 x2.25", resolution the same value as your picture, background white
    Go to Edit>paste. The picture will be on its own layer
    Access the move tool to position it, and to resize with the corner handles of the bounding box, if necessary
    Please report back with your progress.

Maybe you are looking for