Need to Create a Dynamic Calendar Based on School Year Sharepoint O365
I have a request from a school program department. They are in need of a calendar based on total number of days in a school year (180) excluding weekends/holidays. The calendar will need to provide the following information: 1. Upon a student entering
a program, the calendar will need to calculate days of school before entering program, school days in program, and school days after completion of program. I am trying to figure out if this is possible and if so, which program I should use. Access, Excel??
Any suggestions or input would be appreciated.
I feel that your question lacks a lot of background info which would have a HUGE impact on the design of the solution... specifically...
you need a calendar... a calendar is generally a way of visually formatting data into days/weeks/months... and such a calendar can exclude weekends (just don't show saturday/sunday), but there's no good PRACTICAL way to exclude specific days within a month-view.
(I guess if you were using a ghantt chart type of view, you could skip holidays/etc.
But then you mention needing to CALCULATE days... which is different from seeing data visually represented as a calendar...
You mention how the calculation will be used relative to OTHER data, but you don't really mention how that other data is being used.
You also don't really mention what happens in the event of CHANGE... does anything need to happen to the OTHER data, if for example, a school has so many snow days that the school year is extended?
So...
I see a whole host of options...
If the OTHER data is in an InfoPath form, you could create a web service to calculate the days.
If the OTHER data is in an Excel form, you could have a hidden spreadsheet
If the OTHER data is in an Access form, you could have a function operate against some external table lookup
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs
Similar Messages
-
Creating a dynamic lov based on a column
Hi,
I want to create a dynamic lov based on a column in a database-table.
Eg. the query
'select code, description from code_table'
is the contents of the column 'lov_query' in the table 'parameters'.
For every parameter there can be a different lov-query, but the result is always
two columns (code and description, number and name, etc.), exactly what you need to use in a lov.
I've written a (dbms_sql) function that takes the parameter-id and returns the lov_query.
create or replace function "GET_PMR_LOV"
(pmr_id in NUMBER)
return VARCHAR2
is
cur INTEGER := DBMS_SQL.OPEN_CURSOR;
fdbk INTEGER;
l_pmr_id NUMBER(9) := pmr_id;
l_stmnt VARCHAR2(2000);
begin
DBMS_SQL.PARSE
(cur, 'select pmr.lov_query from parameters pmr where pmr.ID ' || ' = 'L_PMR_ID', DBMS_SQL.NATIVE);
DBMS_SQL.BIND_VARIABLE (cur, 'L_PMR_ID', l_pmr_id);
DBMS_SQL.DEFINE_COLUMN (cur, 1, l_stmnt, 2000);
fdbk := DBMS_SQL.EXECUTE (cur);
fdbk := DBMS_SQL.FETCH_ROWS (cur);
IF fdbk > 0
THEN
DBMS_SQL.COLUMN_VALUE (cur, 1, l_stmnt);
return (l_stmnt);
ELSE
return null;
END IF;
DBMS_SQL.CLOSE_CURSOR (cur);
END;
But now I'm stuck on how to pass on this statement in HTMLDB
as an dynamic lov, I don't seem to be able to execute this statement
into the two display and return columns. Any ideas?Hello again,
This lov is on an updatable report-column where the user has to make a choice from an non-named, popup and query-based lov. In the lov-query box I have just put:
"return get_pmr_lov(:p41_param_id)" (without the quotes ;-)
Here's my latest version plus an alternative, which both seem to work fine:
create or replace function "GET_PMR_LOV"
(pmr_id in NUMBER)
return VARCHAR2
is
cur INTEGER := DBMS_SQL.OPEN_CURSOR;
fdbk INTEGER;
l_pmr_id NUMBER(9) := pmr_id;
l_stmnt VARCHAR2(1000);
begin
DBMS_SQL.PARSE (cur, 'select pmr.lov_query from paramaters pmr where pmr.ID ' || '= :L_PMR_ID', DBMS_SQL.NATIVE);
DBMS_SQL.BIND_VARIABLE (cur, 'L_PMR_ID', l_pmr_id);
DBMS_SQL.DEFINE_COLUMN (cur, 1, l_stmnt, 1000);
fdbk := DBMS_SQL.EXECUTE (cur);
fdbk := DBMS_SQL.FETCH_ROWS (cur);
IF fdbk > 0 THEN
DBMS_SQL.COLUMN_VALUE (cur, 1, l_stmnt);
return (l_stmnt);
ELSE
return null;
END IF;
DBMS_SQL.CLOSE_CURSOR (cur);
END;
create or replace function "GET_PMR_LOV2"
(pmr_id in NUMBER)
return VARCHAR2
is
l_pmr_id NUMBER(9) := pmr_id;
l_stmnt VARCHAR2(1000);
BEGIN
EXECUTE IMMEDIATE 'select pmr.lov_query from parameters pmr where pmr.ID = :1'
INTO l_stmnt USING l_pmr_id;
return l_stmnt;
END;
The error-message remains the same, unable to bind :p41_param_id ! -
How can i create a dynamic structure based on my input from a select-option
Hello,
This is to develop a custom report in FI for G/L Balance based on company code.
I have an input select-option for Company code.
Based on the range of company code my output layout should be modified.
I am not very much sure to create a dynamic internal based on the input from a select-option.
Can any one please let me know how can i do this.
I would appreciate for anyone who turns up quickly.
Thank you,
With regs,
Anitha Joss.See the following program, it builds a dynamic internal table based on the company codes from the select option.
report zrich_0001 .
type-pools: slis.
field-symbols: <dyn_table> type standard table,
<dyn_wa>.
data: alv_fldcat type slis_t_fieldcat_alv,
it_fldcat type lvc_t_fcat.
data: it001 type table of t001 with header line.
selection-screen begin of block b1 with frame title text-001.
select-options: s_bukrs for it001-bukrs.
selection-screen end of block b1.
start-of-selection.
select * into table it001 from t001
where bukrs in s_bukrs.
perform build_dyn_itab.
* Build_dyn_itab
form build_dyn_itab.
data: index(3) type c.
data: new_table type ref to data,
new_line type ref to data,
wa_it_fldcat type lvc_s_fcat.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = 'PERIOD' .
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 6.
append wa_it_fldcat to it_fldcat .
loop at it001.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = it001-bukrs .
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 4.
append wa_it_fldcat to it_fldcat .
endloop.
* Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = it_fldcat
importing
ep_table = new_table.
assign new_table->* to <dyn_table>.
* Create dynamic work area and assign to FS
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
endform.
Regards,
Rich Heilman -
Each year for the past 5 years I make a family calendar and send copies to all he family members around the globe. I hate that I have to recreate all the birthdays and special occasions from scratch, and re-drag all the photos onto these dates, in the lower half of the page of each month on the new calendar. How can I create a new calendar for the current year and port all of these photos/comments into the new calendar from last years calendar, to save having to redo all this work!! I am not talking about the upper half page of the photos only...I am referring to the calendar page of each month.
Thanks in advance.
ColinWelcome to the Apple Discussions. Open iWeb so you see your original site in the left hand pane. Use the File->New Site menu option to create a new site. Give it the name you want.
Now select a page in your original site and type Command+D. That will duplicate the page. Drag the duplicate page down to the new site and rename it as needed. Do that for the other pages you need in the original site.
OT -
Help needed in creating a dynamic poplist
Hi,
Can anybody please tell me how to create a dynamic poplist.
Can we create a dynamic poplist without using any controller code.
I have created a simple poplist for "Deptno".
Now I want to create a dynamic poplist for "Empname" , Which should be based on the 'Deptno' poplist entry.
When I select a department number from Deptno poplist, All the employees names under that perticular department should appear in my "Empname" poplist.
So please suggest me how to create "Empname" dynamic poplist.
Thanks,
Swaroopsee thread:
How to create dynamic poplist
--Mukul -
How do I create a dynamic parameter based on a formula?
Hi,
I've developed a report, in CR 11, that is parameterized based on the field "ticket_date". I've created a Min and a Max formula so that I can select a date range. This works wonderfully. However, my date list is growing longer by the day and each day I have to run the report I need to scroll through an even longer list of date values. This will become increasingly impractical with each passing month and year. I would like create a "Year" paramater and a "Month" parameter so that I can first select the Year, then the month(s), then the dates.
When I attempted to create a parameter based on the formula, "Year (), the formula wasn't in the list of available values to create a parameter on.
How can I address this requirement?
thanks in advance!
MarkHi Abhilash,
Looks like I was able to create a Year field in the Command - thanks for the tip!
Before I close this off as answered can you take a look at two sets of SQL I wrote in the Command that I'm getting errors on and offer advice on where the error is occurring.
Example 1
The SQL I attempted to write must be close though:
Select ft.sequence, ft.ticket_date, coff.office_name, comp.subscriptions_id from
field_tickets as ft, company_offices as coff, companies as comp
INNER JOIN jobs ON comp.companies_id=jobs.companies_id
INNER JOIN field_tickets ON jobs.jobs_id=field_tickets.jobs_id
LEFT JOIN company_offices ON jobs.company_offices_id=company_offices.company_offices_id
Where comp.subscriptions_id=7.00
When I attempt to save this I get an error:
"Failed to retrieve data from the database. Details: Exception: Error Message: Java Heap Space"
Example 2
I get the error, "Not unique table/alias: 'custom_jobs_values'" for the following SQL Command
SELECT companies., jobs., field_tickets., regions., customers., custom_jobs_values. FROM
companies, jobs, field_tickets, regions, customers, custom_jobs_values
LEFT JOIN custom_jobs_values ON jobs.jobs_id=custom_jobs_values.jobs_id
INNER JOIN regions ON companies.regions_id=regions.regions_id
INNER JOIN jobs ON companies.companies_id=jobs.companies_id
INNER JOIN field_tickets ON jobs.jobs_id=field_tickets.jobs_id
INNER JOIN customers ON jobs.customers_id=customers.customers_id and
companies.subscriptions_id=4.00
thanks!
Mark -
Need to create a dynamic caption(column name) in a dynamic table
Hi All,
I have created dynamic table .But the dynamic column is not showing.I have created two column name that is name and empId .I have tried with following code
IWDCaption nameCap=(IWDCaption)view.createElement(IWDCaption.class,"nameCap");
nameCap.setText("Name");
tabColumn1.setHeader((IWDCaption)nameCap);
IWDCaption addCap=(IWDCaption)view.createElement(IWDCaption.class,"addCap");
addCap.setText("Address");
tabColumn2.setHeader((IWDCaption)addCap);
I m getting internal server error...But When i m comented the above code i can able to see tha dynamic table withput column name..Can anyone help me
SumanHi
IWDTableColumn tabColumn1 = (IWDTableColumn)view.createElement(IWDTableColumn.class,"N_Co");
IWDTableColumn tabColumn2 = (IWDTableColumn)view.createElement(IWDTableColumn.class,"A_Co");
IWDInputField nameText = (IWDInputField)view.createElement(IWDInputField.class,"N_Text");
nameText.bindValue(attrib1);
tabColumn1.setTableCellEditor((IWDTableCellEditor)nameText);
IWDInputField addText = (IWDInputField)view.createElement(IWDInputField.class,"A_Text");
addText.bindValue(attrib2);
tabColumn2.setTableCellEditor((IWDTableCellEditor)addText);
<b>I need to see the column name.....</b>
for that i have written the following code...
while writting the following code i m getting internal server error
IWDCaption nameCap = (IWDCaption)view.createElement(IWDCaption.class,"nameCap");
nameCap.setText("contribution_area");
tabColumn1.setHeader((IWDCaption)nameCap);
IWDCaption addCap=(IWDCaption)view.createElement(IWDCaption.class,"addCap");
addCap.setText("SUM");
tabColumn2.setHeader((IWDCaption)addCap); -
Need to Create a Dynamic Tablular Form in APEX
Can someone point me to the APEX documentation that discusses how to create a tabular form that can be dynamic (I can add or change data in the table)? Similar to a report, but where the data can be modified.
Thanks.
DavidActually, I found the step by step tutorial on creating a tabular form. So I should be all set. No need to reply to this thread.
Thanks.
David -
I need to create Buttons dynamically Please Help
I am currently developing a card game. I represent my cards as buttons. But as the player draws more cards from the deck I have to generate buttons dynamically at run-time. I could use arrays of buttons and store new buttons inside that arrays of buttons. But the only problem is I need ActionListener for each of my buttons. How do you create ActionListener for each different dynamically created buttons? Please Help.
Here is my code. I just do not understand how to create those functions dynamically that functions different each time.
Here is my code please take a look.
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class run108{
JButton setbutton;
JButton ButtonUp;
JButton ButtonDeal;
JButton slot1;
JButton slot2;
JButton slot3;
JButton slot4;
JButton slot5;
JButton slot6;
JButton slot7;
cards[] card = new cards[55];
public static void main(String[] argv)
run108 startgui = new run108();
startgui.createframe();
void createframe()
//Standard of way of creating Frame
JFrame frame = new JFrame("108");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setLocation(300,200);// Tells the startup position;
//Adding Panels to the framework
JPanel panelA = new JPanel();
panelA.setBackground(Color.white);
panelA.setLayout(new BoxLayout(panelA,BoxLayout.Y_AXIS));
JPanel panelB = new JPanel();
JPanel panelC = new JPanel();
//Adding buttons with card images
JLabel label1 = new JLabel(" Set of Cards");
panelA.add(label1);
ImageIcon pic1 = new ImageIcon("cards/backd.png");
setbutton = new JButton(pic1);
panelA.add(setbutton);
ImageIcon picdeal = new ImageIcon("cards/deal.png");
ButtonDeal = new JButton(picdeal);
panelA.add(BorderLayout.CENTER, ButtonDeal);
ButtonDeal.addActionListener(new DealListener());
JLabel label2 = new JLabel(" Your Target");
panelA.add(label2);
ButtonUp = new JButton(pic1);
panelA.add(BorderLayout.CENTER, ButtonUp);
frame.add(BorderLayout.WEST,panelA);
// Adds 7 initial card slots.
ImageIcon pic2 = new ImageIcon("cards/backc.png");
slot1 = new JButton(pic2);
panelB.add(slot1);
slot1.addActionListener(new Slot1Listener());
slot2 = new JButton(pic2);
panelB.add(slot2);
slot2.addActionListener(new Slot2Listener());
slot3 = new JButton(pic2);
panelB.add(slot3);
slot3.addActionListener(new Slot3Listener());
slot4 = new JButton(pic2);
panelB.add(slot4);
slot4.addActionListener(new Slot4Listener());
slot5 = new JButton(pic2);
panelB.add(slot5);
slot5.addActionListener(new Slot5Listener());
slot6 = new JButton(pic2);
panelB.add(slot6);
slot6.addActionListener(new Slot6Listener());
slot7 = new JButton(pic2);
panelB.add(slot7);
slot7.addActionListener(new Slot7Listener());
frame.add(BorderLayout.CENTER,panelB);
// This has to be added @ the end to show the components
//that were added after on. If it is placed before the components
//the components shall not appear since they sit on the frame
frame.setSize(600,500);
frame.setVisible(true);
class DealListener implements ActionListener
public void actionPerformed(ActionEvent event){}
class Slot1Listener implements ActionListener
public void actionPerformed(ActionEvent event){}
class Slot2Listener implements ActionListener
public void actionPerformed(ActionEvent event){}
class Slot3Listener implements ActionListener
public void actionPerformed(ActionEvent event){}
class Slot4Listener implements ActionListener
public void actionPerformed(ActionEvent event){}
class Slot5Listener implements ActionListener
public void actionPerformed(ActionEvent event){}
class Slot6Listener implements ActionListener
public void actionPerformed(ActionEvent event){}
class Slot7Listener implements ActionListener
public void actionPerformed(ActionEvent event){}
} -
Need help creating a device collection based on members of a user collection
Hello everyone,
I am working on developing a device collection based on the membership of a user collection. The purpose of the device collection is to provide us with the capability of deploying software to users while the users are logged off their systems.
I would love to use AD security groups but unfortunately that isn't an available approach in this case. I have been experimenting with SQL queries to find the best way to obtain the results I want and the following query works like a champ:
Select SYS.Name0,
v_R_User.Unique_User_Name0
FROM v_R_System AS SYS
JOIN v_UserMachineRelationship ON SYS.Name0=v_UserMachineRelationship.MachineResourceName
JOIN v_R_User ON v_UserMachineRelationship.UniqueUserName=v_R_User.Unique_User_Name0
JOIN v_FullCollectionMembership AS FCM on FCM.ResourceID = v_R_User.ResourceID
JOIN v_Collection AS COLMEM ON COLMEM.CollectionID = FCM.CollectionID
Where FCM.CollectionID = 'cha0000B'
The problem arises when I attempt this same query in SCCM 2012, I don't get any results from this query so of course it won't work to base a Device Collection from. Here is the WQL:
Select SYS.Name,
SMS_R_User.UniqueUserName
FROM SMS_R_System AS SYS
JOIN SMS_UserMachineRelationship ON SYS.Name=SMS_UserMachineRelationship.MachineResourceName
JOIN SMS_R_User ON SMS_UserMachineRelationship.UniqueUserName=SMS_R_User.UniqueUserName
join sms_v_FullCollectionMembership AS FCM on FCM.ResourceID = SMS_R_User.ResourceID
join SMS_v_Collection AS COLMEM ON COLMEM.CollectionID = FCM.CollectionIDwhere FCM.CollectionID = 'cha0000B'
I am hoping that someone will be able to look at my SQL and tell me how I can get the WQL right so I can use this query properly or provide suggestions to accomplish what I need.
Thanks in advance for the assist,
Chris BoltonHi Torsten,
While your suggestion of that link was close, it still went in the direction of using security groups as the basis for device queries and that isn't the direction I am pursuing. I had a colleague look at my original query and he identified
that I had some unnecessary redundancy but that didn't resolve my SQL -> WQL inconsistency. I continued to play with the query and the following SQL also works (and actually works a bit better for my purposes)
select distinct v_R_System.Name0,
v_R_User.Unique_User_Name0
FROM v_R_System
JOIN v_R_User on v_R_User.Full_User_Name0 = v_R_System.User_Name0
JOIN v_UserMachineRelationship ON v_R_System.Name0 = v_UserMachineRelationship.MachineResourceName
JOIN v_FullCollectionMembership on v_R_User.Unique_User_Name0 = v_FullCollectionMembership.SMSID
WHERE v_FullCollectionMembership.CollectionID = 'cha0000b'
however when I translate it to WQL I still am unable to get results (here is the WQL version)
select distinct sms_R_system.Name,
sms_R_User.UniqueUserName
FROM sms_R_system
JOIN SMS_R_User on SMS_R_User.FullUserName = SMS_R_System.UserName
JOIN SMS_UserMachineRelationship ON SMS_R_System.Name = SMS_UserMachineRelationship.MachineResourceName
JOIN SMS_FullCollectionMembership on SMS_R_User.UniqueUserName = SMS_FullCollectionMembership.SMSID
WHERE SMS_FullCollectionMembership.CollectionID = 'cha0000b'
I think I am on the verge of getting this right but it sure seems to be a challenge. Is there a "WQL Workbench" that I could use that is similar to SQL Management Studio inside of which I could test these queries rather than having to use the rather clunky
SCCM "Edit Query Statement" dialog box?
Thanks again,
Chris Bolton -
Need to create UIElements dynamically in webdynpro
hi,
i want to know, if there is a possibility for dynamic form creation in webdynpro....
regards
rajeshHi,
Dynamic UI Element creation
We can create it only in the WD Modify View.
Get the instance for the Root UI Element Container.
Create the UI element Ex: Input Field, Text View etc.
Bind the UI Element to the Attribute Value.
Now bind the UI Element to the Root UI Element Container.
IWDTransparentContainer root =(IWDTransparentContainer)view.getRootElement();
IWDInputField InpName = (IWDInputField)view.createElement(IWDInputField.class,"InpName");
IWDInputField InpAge = (IWDInputField)view.createElement(IWDInputField.class,"InpAge");
IWDInputField InpGender = (IWDInputField)view.createElement(IWDInputField.class,"InpGender");
IWDNode Mad =wdContext.getChildNode("Person",0);
IWDAttributeInfo NameAtt = Mad.getNodeInfo().getAttribute("Name");
IWDAttributeInfo AgeAtt = Mad.getNodeInfo().getAttribute("Age");
IWDAttributeInfo GenderAtt = Mad.getNodeInfo().getAttribute("Gender");
InpName.bindValue(NameAtt);
InpAge.bindValue(AgeAtt);
InpGender.bindValue(GenderAtt);
root.addChild(InpName);
root.addChild(InpAge);
root.addChild(InpGender);
Dynamic Action Creation
Create the Action in the Action tab.
Create a Button.
Get the reference for the created action (Through the Event Handler).
Bind the Action to the Button.
Bind the Button to the Root UI element Container.
IWDButton ButGo = (IWDButton)view.createElement(IWDButton.class,"ButGo");
IWDAction ActGo = wdThis.wdCreateAction(IPrivateStartView.WDActionEventHandler.GO,"Click");
ButGo.setOnAction(ActGo);
root.addChild(ButGo);
Now write the required code for the Event Handler that is associated with the Action.
//@@begin onActionGo(ServerEvent)
IWDNode Mad = wdContext.getChildNode("Person",0);
wdComponentAPI.getMessageManager().reportSuccess(Mad.getCurrentElement().getAttributeAsText("Name"));
wdComponentAPI.getMessageManager().reportSuccess(Mad.getCurrentElement().getAttributeAsText("Age"));
wdComponentAPI.getMessageManager().reportSuccess(Mad.getCurrentElement().getAttributeAsText("Gender"));
//@@end
Hope it helps,
*GS -
Assistance Needed With Creating a Dynamic Query
I am attempting to rename several of my primary key/foreign key constraints from the default "SYS" names to something actually meaningful. I have several "semi-dynamic" queries that look something like this:
SELECT 'ALTER TABLE L_ROLE RENAME CONSTRAINT ' || CONSTRAINT_NAME || ' TO NN_ROLE_ID; ' FROM USER_CONSTRAINTS WHERE CONSTRAINT_TYPE ='C' AND TABLE_NAME='L_ROLE' AND search_cond(constraint_name)='"ID" IS NOT NULL';
Unfortunately, I have to capture the output of this script and run THOSE statements to get anything done.
I would like to convert this to simply use EXECUTE IMMEDIATE or if necessary a stored procedure. Unfortunately, I'm a bit confused on what the end result would look like. Any assistance would be appreciated.
Jason
p.s."search_cond" is a custom function defined as follows:
create function search_cond( p_cons_name in varchar2 ) return varchar2
as
l_search_condition varchar2(4000);
begin
select SEARCH_CONDITION into l_search_condition
from user_constraints
where constraint_name = p_cons_name;
return l_search_condition;
end;
For some reason, just running the query outside the function doesn't work.OK, try this. Please note that I commented out the actual exec immediate line and instead just dbms_output the commands that will get executed. This way you can try this first to make sure it produces what you expect. Then just put the exec immediate back in when you are ready.
DECLARE
TYPE cur_typ IS REF CURSOR;
v_cursor cur_typ;
v_query VARCHAR2(1000);
v_exec VARCHAR2(1000);
BEGIN
v_query := 'SELECT ''ALTER TABLE ''||uc.table_name||'' RENAME CONSTRAINT '' || uc.constraint_name ||
'' TO NN_''||ucc.column_name||'' '' thequery
FROM user_constraints uc,
user_cons_columns ucc
WHERE uc.constraint_name = ucc.constraint_name
AND uc.constraint_type =''C''
AND search_cond(uc.constraint_name)=''"ID" IS NOT NULL''
AND uc.constraint_name LIKE ''SYS%'' ';
DBMS_OUTPUT.PUT_LINE(v_query);
OPEN v_cursor FOR v_query;
LOOP
FETCH v_cursor INTO v_exec;
EXIT WHEN v_cursor%NOTFOUND;
--EXECUTE IMMEDIATE (v_exec);
dbms_output.put_line(v_exec);
END LOOP;
CLOSE v_cursor;
END;
/Greg -
Need to create checkboxes dynamically
Hi all ,
I need to craete checkboxes in jsp using htmlb dynamically
also on click of a button , I want to send the values of the selected checkboxes to a function
can somebdy help , I will be using htmlb controlsHi,
The below link may help you
http://help.sap.com/erp2005_ehp_03/helpdata/EN/7d/9b0e41a346ef6fe10000000a1550b0/frameset.htm
Regards
Suresh Bachimanchi -
Using DW to create a dynamic, grid-based website
I am a novice to this whole web design thing but I have big dreams of accomplishing a big goal and designing my own website.
I am aiming to create a site similar in concept and design to this one: http://dynamit.us
I am looking to replicate the multi-sized "content boxes" using a grid (which I know can be easily done in DW), and I am looking to have my website automatically "pull" content when the scroll bar reaches the bottom of the page (Facebook is another example of a website that uses this feature).
I am NOT concerned with replicating the animation(s) on the dynamIt website, as can be seen on the photos that have the magnifying glass in the top right corner.
I am thinking about biting the bullet and upgrading my trial version of DW to the full package, but I want to make sure that I am purchasing the correct software to achieve the result I'm aiming to achieve.
Can I create a somewhat simplified version of this website (dynamit.us) using just Dreamweaver (and maybe PS for photo editing)? How do I build a site that pulls "past" or "old" content from a library and "updates" on the page every time the scroll bar reaches the bottom of the page (Infinite Scrolling)?
THANK YOU!Dreamweaver is a great tool. It will aid you in achieving your goals. But it won't make you an instant success at professional web development any more than purchasing a fancy, expensive camera makes you an instant success at photography.
How much experience do you have with with web design theory, HTML, CSS, client-side (JavaScript), Server-side (PHP) and databases (MySql)?
Ultimately, a working knowledge of your craft is primary. The tools you use are secondary.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/ -
Need to create high & low payment based on 20% down for both 36 and 42 month lease terms.
I have 3 different tables on my worksheet and need to formulate low and high payment scenarios for both 36 and 42 month lease terms based on 20% down. Help.
trods wrote:
Anyone?
Patience, trods. Remember that this is a user-to-user forum, and the participants arrive when they choose to or are able to, not according to a work schedule set by an employer.
On your question:
So far you have supplied two factors, and implied a third, that would affect the size of the payments to be made:
Total amount, downpayment as a percentage of the total amount, and the term on the agreement in months.
From that you want to calculate a "low payment scenario" and a "high payment scenario" for a term of 36 months, and the same two scenarios for a term of 42 months.
Missing from the data is whatever factor determines how a "low payment scenario" differs from a "high payment scenario." What's missing?
Regards,
Barry
Maybe you are looking for
-
Help me! Please Just been on holiday and one of our party lost his iPhone 4s.He didn't set it up on iCloud.He has it set to vibrate and it goes straight into voice mail. Does anyone know if there is a way of locating it without iCloud/MobileMe? We do
-
Report generation set font vi messed up
Hello all, I am not sure if I am the only one who has had this problem. I just upgraded to the developer suite professional editon. I installed the software and then installed the Report Generation Toolkit. None of my VI's I had written that used
-
Using multiple iCloud accounts on iPhone
Can I have multiple icloud accounts for my iPhone? Iwant my wife to be able to sync with our network at home without changing her Apple ID
-
Hi Gurus; Can some one send me the abap codes used mainly for reporting OR can some one give me some sample code used in reporting. my mail id "[email protected]".
-
TS1367 Macbook pro not turning on
My mac book pro doesnt turn on sometimes i have taken it the AASP before and they reported that the device was working fine but im still facing the same issue kindly help