Need to create a transport of SD config data from DEV 120 to DEV 110

During our conversion some config modifications were mad in DEV 120 instead of DEV 110.
I need to get the config:
SPRO> Sales Distribution> Billing> Billing Documents> copy sales documents to Billing documents
From 120 to 110.
I have tried to force a transport creation in 120, and used SCC1 to import into 110, but no data comes over.
How can I force all the data from these config tables to load into a transport so can send from 120 to 110.
Thanks,
Bev Barbush

Hi Beverly,
I would try bringing this transport in via STMS and then reviewing the import log to see why the data is not going across. What I've normally seen in this situation is the data was not correctly added to the transport before it was imported.
I would NOT copy config tables back from the QAS system. Copying select portions of config data from one system to another is likely to break all sorts of logical relationships between tables.
Have you guys tried running a config comparison between 110 and 120 to see what the actual differences are?
Hope that helps.
J. Haynes

Similar Messages

I need to create a second back-up of iPhoto from Time Machine to a separate external drive. The old iPhoto in TM will not open. Please help!

I need to create a second back-up of iPhoto from Time Machine to a separate external drive. The old iPhoto in TM will not open. Please help! And thank you!

Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

Can I create a Stored Procedure That access data from tables of another servers?

I'm developing a procedure and within it I'm trying to access another server and make a select into a table that belongs to this another server. When I compile this procedure I have this error message: " PLS-00904: insufficient privilege to access object BC.CADPAP", where BC.CADPAP is the problematic table.
How can I use more than one connection into an Oracle Stored Procedure?
How I can access tables of a server from a Stored Procedure since the moment I'm already connected with another server?
Can I create a Stored Procedure That access data from tables of another servers?

You need to have a Database Link between two servers. Then you could do execute that statement without any problem. Try to create a database link with the help of
CREATE DATABASE LINK command. Refer Document for further details

Need to create a directory in inDesign using data merge

Need to create a multi paged document that contains fields with persons pix, name, address, and phone number.
It will be alphabetized and searchable using an index.
I want the end result to be a multi-page pdf.
Is data merge the tool to use?
Or please suggest some other application, mac please!
Any advice...
Lisa-renee

Yep, Data merge can do that. You'll want to make multiple records per page, have a look at the help here and report back with specific questions if you have them.
You need to get your document that you're merging from sorted first though, there's a script here that will help you arrange your images.

How to create a report to bring all data from two different Info providers

Hi All,
I have a peculier problem while creating a report. I have two custom info providers one DSO and another Cube. There are only two common fields between these two Info providers . I need to create a report such that the report displays all the values from DSO but user can have the selection option on one of the fields in the Cube.
Here is an example
DSO Contents:
DocNum-     DocItem-     DocText-     Amount-      Quantity
10000----     10----            ABC----          100----           10
10001----     20----     DSN----     200----     10
10005----     20----     DSN----     200----     10
Z1003----     10----     CAN----     500----     1
Cube Contents
DocNum-     DocItem-     Date-----          InvoiceAmt
10000----     10----     1/10/2009----         50
10001----     20----      2/20/2009----        100
10005----     20----      2/25/2009----        100
The report needs to be displayed as shown below when the user selects value for date from 1/10/2009 to 2/20/2009
DocNum-     DocItem-     DocText-     Amount-      Quantity
10000----     10----     ABC----     100----     10
10001----     20----     DSN----     200----     10
I hope this was clear for you to understand. I would really appricate if any one can answers about how to resolve this problem. I cannot add the date filed to DSO and I also have Doc Num and Item as the user selection fields in the report.
Thank you all in advance and i would really appreciate for your suggestions.
Regards
Chinna
Edited by: chinna2479 on Mar 3, 2009 7:38 PM
Edited by: chinna2479 on Mar 3, 2009 7:39 PM

Hi chinna,
Two possible options, I can think of now, but both of them may be a compromise with performance.
1. create an infoset and then a query on top of it, provided we have a one to one relation in both the targets. That is, the combination of doc and item number is not duplicate in either cube or ODS.
2. Create a master data object of doc and item number and have date as an attribute. Load that from cube data and make date as navigational attr.
Use this navgntal attr for selection in your report.
Let us know, if you require any further info.
Naveen.A

How to efficiently create a single waveform based on data from two other waveforms?

I have a 1-D array of waveform with size = 4 that contain "raw" potentiometer voltage data. I need to manipulate waveform data from index 0 & 1 using the formula shown below to derive a single waveform of angle data. I need to do the same for index 2 & 3 as this is a redundant circuit. I was hoping that the formula node can work on entire arrays and although it can take an array as input, it requires me to index the array in the formula so it becomes a scalar value.
Since the formula is relatively complex, I'd like to keep it in text form but have it automatically work on each point of the two input arrays. This math is done inline with pulling data out of a DAQ and so I need it to be as efficient as possible so that I don't spend too much time on it and potentially overflow the DAQ buffer.
The naive solution would be to wrap the formula nodes with for loops, but I don't know if this is this is an efficient way to do this. I would appreciate any suggestions on how best to tackle this.
Thanks!
Solved!
Go to Solution.

Here's how I would do it with no formula nodes or loops requied:
If you want to use the formula node, then you could run a loop inside each formula node while you index through the arrays. The performance difference between formula nodes and the graphical approach should be insignificant. Note that my approach assumes that the array sizes are the same. You could also create a sub VI to contain the math so you don't have to maintain two copies of the same piece of code.
Chris M

Creating a duplicate db by using data from a earlier state of original db

Two days ago, a developer updated data from a table and we need to restore the original.
Our backup policy:
Every night, we do a whole database backup. Also, our retention window is 5 days, so we have archivelogs for the past couple of days.
How could I create a new database, whose data is that of the original data 2 days ago?
BTW, we are using Oracle 10g Standard Edition so we don't have Flashback table/database feature.
My plan is to create a duplicate database restored to 2 days ago, so that we can extract the neccessary data from the table of interest. After we have extracted the data, we'll drop the duplicate database.

You would have to do an incomplete recovery of the database, probably onto a separate server. You could then export the table in question and import the table into the current production database. You will lose any changes to that table that have been made in the past 2 days, and may introduce some issues if there are dependent tables that have changed. At that point, you can drop the incompletely recovered database.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Transporting large amounts of data from one database schema to another

Hi,
We need to move large amount of data from one 10.2.0.4 database schema to another 11.2.0.3 database.
Am currently using datapump but quite slow still - having to do in chunks.
Also the datapump files quite large so having to compress and move across the network.
Is there a better/quicker way?
Habe haerd about transportable tablespaces but never used them and don't know about speed - if quicker thana datapump.
tablespace names different in both databases.
Also source database on solaris opertaing system on sun box
target database on aix on ibm power series box.
Any ideas would be great.
Thanks
Edited by: user5716448 on 08-Sep-2012 03:30
Edited by: user5716448 on 08-Sep-2012 03:31

user5716448 wrote:
Hi,
We need to move large amount of data from one 10.2.0.4 database schema to another 11.2.0.3 database.
Pl quantify "large".
Am currently using datapump but quite slow still - having to do in chunks.
Pl quantify "quite slow".
Also the datapump files quite large so having to compress and move across the network.
Again, pl quantify "quite large".
Is there a better/quicker way?
Habe haerd about transportable tablespaces but never used them and don't know about speed - if quicker thana datapump.
tablespace names different in both databases.
Also source database on solaris opertaing system on sun box
target database on aix on ibm power series box.
It may be possible, assuming you do not violate any of these conditions
http://docs.oracle.com/cd/E11882_01/server.112/e25494/tspaces013.htm#ADMIN11396
Any ideas would be great.
Thanks
Edited by: user5716448 on 08-Sep-2012 03:30
Edited by: user5716448 on 08-Sep-2012 03:31Master Note for Transportable Tablespaces (TTS) -- Common Questions and Issues [ID 1166564.1]
HTH
Srini

Is it possible to create an Apple Script to import data from a web data feed (RESTful XML/JSON)?

Before I get started looking for a programmer, does anyone know if it will be possible to create a script that will allow Numbers to connect to an external data feed in either XML or JSON? I want to enable some colleagues who use Mac to connect to the same data feed that Excel for Office connects to.. Thanks,

It is definitely not hard to import XML or JSON data via an AppleScript. As an amateur tinkerer, I found a way, for example, to bring in OFX data from my bank (OFX is a flavor of XML) using the XML parser built into System Events, which is AppleScriptable.
How satisfied your colleagues would be with the solution, though, will depend on what you mean by "connect to an external data feed." If you are dealing with datasets in the thousands of rows and need frequent and rapid response, then you may not be happy. In that kind of situation you would need to expect at least a few seconds of wait time every time you "refresh."
If, as in my case, you have only a few hundred rows and don't need to bring the data in every few seconds, then the AppleScript solution is very practical. The programmer could probably goose the performance and make the job easier by using AppleScript as a wrapper for a script in Python or another language that is faster than AppleScript at parsing XML and JSON.
SG

Is there a way to create a transport to mass-delete objects from another system?

I am facing a unique issue where I have to generate a transport that will successfully import into an external SAP system and delete over 1,000 objects (reports, data elements, UI elements, transactions, function groups, the whole lot...). All of these objects can be easily looked up because they are in the same namespace.
Essentially, I need to remove all objects with a given namespace via transport.
Is there any way to do this other than manually deleting all of the objects in the source system and adding them tediously to a single workbench request? This would take hours if not days to do manually, especially due to dependency issues.
Thanks for any and all constructive feedback!

Hi,
I did a quick test: created a new package (development class) with one table, one function group using the table in global data definitions containing one function module referring to the table in interface, and one program that's calling the function module and using table in data definitions. Released the transport to Q.
Then, in the second our dev system, I created the same package and TADIRs for the three objects manually (SM30); released transport to Q of that system. Then I manually created transport containing all the three objects, the export log looked like this:
TADIRs in second dev system were gone after export.
Then I added transport to the first development system and imported
- the objects were gone (including their TADIRs) leaving the empty package.
In retrospect, I should have deleted the empty package in second system so it's cleaned up by the same transport.
If you do have access to "clean" system, doing via ABAP the steps I did manually should not be too much of a challenge.
I may have simply gotten lucky and if this works with all objects, for all kinds of dependencies, remains to be seen... though I was until now under impression that import itself doesn't check any dependencies at all... What kind of messages were you getting?
cheers
Janis

Need Help Creating A Script For Labeling Finder Files from Indesign

Trying to figure out a way to have a script run in InDesign CS4 that will label a text file RED after it's been imported into InDesign.
We import numerous text files into an InDesign template. Since there are several text files in the same folder, we need to somehow "mark off" that we've imported that file and move to the next one to import. I have created an Automator "service" with a keyboard shortcut to label the file Red in the finder but it would be great if we could have this happen automatically after we import into InDesign.
If we import the wrong text file by accident and it gets missed in proofing, it costs us a lot of money with the printer.
Thanks for any ideas.
Jim

You know, these guys are absolutely right in their assessment that this is a good place for event listeners. You would need three scripts though.
Something like...
Label Placed Files Red.scpt
--Put this in a folder called IDScripts in your Documents folder
main(evt)
on main(myEvent)
tell application "Adobe InDesign CS4"
set placedFilePath to full name of myEvent
set placedFilePath to placedFilePath as alias
end tell
tell application "Finder"
--This turns the file color red
set label index of placedFilePath to 2
end tell
end main
And these two are in your InDesign scripts folder...
Start Placed File Finder Labelling.scpt
--Installs the afterImport event listener for the Label Placed Files Red script.
tell application "Adobe InDesign CS4"
set myHandler to path to documents folder
set myScriptName to "Label Placed Files Red.scpt"
set myHandler to "" & myHandler & "IDScripts:" & myScriptName
try
set myHandler to myHandler as alias
make event listener with properties {event type:"afterImport", handler:myHandler, captures:true}
display dialog "Placed File Labelling: ON" buttons "OK" default button 1
on error
display dialog "ERROR: Couldn't start handler!" & return & return & "Make sure the \"" & myScriptName & "\" script in a folder called \"IDScripts\" inside your Documents folder and try again" buttons "OK" default button 1
end try
end tell
Stop Placed File Finder Labelling.scpt
--Removes the afterImport event listener for the Label Placed Files Red script.
tell application "Adobe InDesign CS4"
set myHandler to path to documents folder
set myScriptName to "Label Placed Files Red.scpt"
set myHandler to "" & myHandler & "IDScripts:" & myScriptName
set myHandler to myHandler as alias
set myResult to remove event listener event type "afterImport" handler myHandler with captures
if (myResult is false) then
display dialog "ERROR: Couldn't remove handler! Are you sure it is active?" & return & return & "If so, please quit and relaunch InDesign to get rid of it." buttons "OK" default button 1
else
display dialog "Placed File Labelling: OFF" buttons "OK" default button 1
end if
end tell

I need help creating a formula that looksup cell data and give a value.

I want to have the table "At a glance" show the total days a driver has worked, there total in sales and there total in milage. The table shown is a example of what I want to have happen. I want to input any name into cell B2,C2,D2,ect. that is found in the row C2:C17 of Checkpoint (Truck 1) and Checkpoint (Truck 2) and return the total amount of day the driver has driven both trucks, The total in sales the driver has collected (Truck 1 and 2) and How many miles the driver has driven (Truck 1 and 2). I realize that these tables are not labeled correct. If I enter a name into B2 and the driver associated with that name hasnt driven then I want "N/A' to show in cell B2 and so one. I assume that the formula that is created for cell B2 will be copied and pasted into cell C2, D2, ect..
If someone could help me with this problem I'd really appreciate it.
Thanks.

Hi br,
To show the number of days worked by a driver, you need to COUNT the number of times that driver's name appears in row 2 of both tables.
To calculate his total sales and total mileage, you need to SUM the amounts he brought in each day and the distances he drove each day.
Your functions for this are COUNTIF and SUMIF.
Formulas in At a Glance:
B2: =COUNTIF(Truck 1 :: $3:$3,B$1)+COUNTIF(Truck 2 :: 3:3,B$1)
B3: =SUMIF(Truck 1 :: $3:$3,B$1,Truck 1 :: $5:$5)+SUMIF(Truck 2 :: $3:$3,B$1,Truck 2 :: $5:$5)
B4: =SUMIF(Truck 1 :: $3:$3,B$1,Truck 1 :: $12:$12)+SUMIF(Truck 2 :: $3:$3,B$1,Truck 2 :: $12:$12)
Fill all three formulas right to the last column of At a Glance.
To put N/A in place of the 0 in Roger's column and the empty columns, wrap each of the formulas in an IF statement:
Bn: =IF(AND(ISERROR(MATCH(B$1,Truck 1 :: $3:$3,0)),ISERROR(MATCH(B$1,Truck 2 :: $3:$3,0))),"N/A",formula)
Where formula is the formula used in column B above.
Regards,
Barry

Need to create a function to receive binary files from Java WebDynpro

Hey,
I need to recieve files from java Webdynpro and save them as a file on the backend
system. After that, the file will be loaded to the documentum.
In a function module, I only can get the files as a String. Therefore (I think), I need the
binary file as base64 encoded. Otherwise I can´t get it as a string.
Now I need to decode it in the backend, but how? I know, there are HTTP-classes
in newer system, but not in the 4.6C System, I have here.
Any idea, how I can recieve the files in the function module and transfer it as binary
file to the backend system?
If I load a file from the gui with gui_upload, I get the binary file as an internal table
and can transfer it to the backend filesystem now. Maybe I can get the binary file
in this way in the function?
Thank You for Your help!
Arne

http://jakarta.apache.org/commons/net/

Need to create a HD Windows Media Video (wmv) from an HD sequence

i thought i could simply create a QT-DVCPro Hd .mov file, transfer it over our network to a PC, and encode it using the free 'Windows Media Encoder'.... WRONG! i can't seem to play any QT HD file on any PC, i have tested both DVCPro HD and HDV. The audio plays fine, but the QT screen remains black. does anyone have any other ideas? i guess my last resort would be to purchase the FLIP4MAC Pro version for $179, but if i could avoid that, even better! Thanks for any input.

If you have After Effects, you can output WMV. If not, try download flip4mac trial version and test (limited to 10 secs of output). Other options are telestream's Episode, but that's far pricier.
Don't know much about the PC environment, but have you downloaded Quicktime for Windows - that might help. Or else output to a format that Windows Media Encoder likes.

I need the detail about how to read the data from spreadsheet file. but the file should not created by labview.

i face some difficulties here. the datas are encrypted...... how to get correct data ..........

Excel files are in a propriertary microsoft format. A LabVIEW "spreadsheet" file is a file containing an ASCII table with tabs separating columns and linefeeds separating rows. They are not ther same!
If you use "write to spreadsheet file" and name the file *.xls, this does NOT make it an excel file, it just tells the operating system to open it with excel if you double-click it. Excel is smart enough to notice that it is not really an excel file and does its best to convert it transparently. The same does not work in reverse.
You have several options:
You can use excel to export your data to something LabVIEW can read. Try e.g. tab delimited text.
You can use e.g. activeX to read an excel file, see: http://zone.ni.com/devzone/cda/epd/p/id/3409
Search for excel in your example finder for more possibilites.
LabVIEW Champion . Do more with less code and in less time .

Need to create a transport of SD config data from DEV 120 to DEV 110

Similar Messages

Maybe you are looking for