Need to find the time spent based on condition

Post Author: EarthMover
CA Forum: Formula
Employee Name   Problem Description         Condition   Time
Alder, Harrison     10W Hydraulic Tanker       ACUP       2/18/2008 1:34:46PM
Alder, Harrison     10W Hydraulic Tanker       COMP      2/18/2008 1:59:37PM
Here's the skinny, for every ticket that goes into the system, there are two time stamps attached to that ticket.
1. is when the ticket was signed on to and became active ( ACUP or ACDN )
2. is when the ticket was signed off or completed ( COMP, COUP,CODN,MSDN,MSUP,PTDN,PTUP,SMUP,SMDN ) all of these are possible sign off conditions.
I need a way to find the difference in time between these two time stamps either based on the condition or if there is another way that would work, I am completely open to suggestions.

Post Author: V361
CA Forum: Formula
Do your times always fall in the same day ?

Similar Messages

How To Find out Time Spent on a project

The reason I am asking this question is because I would like to know how long I spent on a project so I can record it for future reference.
With Sony Vegas you could have the time spent actually showing in the software with some tweaking Iw as wondering if you could do the same in Final Cut Pro.
Thanks for the help guys

Not as far as I know.
I find the program based trackers to be a waste of time. Does this happen to you? You go for a coffee break that turns into lunch that turns into a new project meeting and you left the project open the whole time? If so, whatever time the program says you've been working is hours off.
Just keep a notebook on the desk to track hours if you like analog or set it up in iCal (or Quicken) and develop the discipline to keep your time.
Nothing is as simple as making a note on a piece of paper - really.
x

Calculate the time spent to execute your program

Hi
I have a pgm which calculates the response time in milllisecond using method System.currentTimeMillis(). And I get answer 0.
My question is If we measure the time in terms of nanosecond, do you think we still get zero answer?and What is your explanation for that?
Waiting for reply. Thanks in Advance
Regards,
Jyoti

Hi,
Here is the code for calculating the response time.
public class RunLinkedEvenOddList {
     public static void main(String[] args) {
          long time1;
          long time2;
          time1 = System.currentTimeMillis();
          System.out.println("Program 2 output:");
LinkedEvenOddList eolist = new
ew LinkedEvenOddList();
          eolist.insert(9);
          eolist.insert(4);
          eolist.insert(3);
          eolist.insert(2);
          eolist.insert(5);
          eolist.print();
          System.out.println("print Even:");
          eolist.printEven();
          System.out.println("print Odd:");
          eolist.printOdd();
          eolist.delete(9);
          eolist.delete(1);
          System.out.println("list after delete 9, 1:");
          eolist.print();
          System.out.print("execute isMemeber(3): ");
          System.out.println(eolist.isMember(3));
          time2 = System.currentTimeMillis();
System.out.println("The starting time: " + time1 +
+
                    " milli seconds.");
          System.out.println("The ending time: " + time2 +
                    " milli seconds.");
Answer the following questions based on the output of
your code:
1. Calculate the time spent to execute your program
based on the value of time1 and time2; you need write
your formula first and then give the answer in
millisecond.
Answer:
time2-time1
time spent to execute your program = 0 millisec
2. If we measure the time in terms of nanosecond, do
you think we still get zero answer?
Answer:
3.What is your explanation for that?
Answer:
Pls help me in answering question 2 and 3. Thanks in
advance.Hai Ram!
Yeh homework mai hai.
Akhela mai karo. (Do your own work).

HT201514 i can't see the time capsule from airport utilities. i did follow "From the Apple menu, choose System Preferences. Choose View Time Machine. Set Time Machine to On if it is off. .....but i couldn't find the time capsule from airport utility.....

i did follow "From the Apple menu, choose System Preferences. Choose View > Time Machine. Set Time Machine to On if it is off "
. .....but i couldn't find the time capsule from airport utility..... why?

Are you using a new 802.11ac Time Capsule - the "tall" one - and are you still using Mac OS X 10.6.8?
You need OS X 10.7.5 "Lion" or later, or an iOS device, to configure an 802.11ac Time Capsule:
http://manuals.info.apple.com/MANUALS/1000/MA1645/en_US/airport_time_capsule_802 11ac_setup.pdf
See page 12.

HT201250 i can't find the time machine icon on my dock?

I need to restore a file - can't find the time machine icon on my dock?

Is it in the Applications folder?
If so you can open it from there.
If it is you can get back on the Dock by dragging it there from the Applications folder again.
Allan

I have stored everything on my Macbook pro in a external hard drive (Time Machine) Now that we have "wiped the machine" I am told I can start it over and load ontent--apps, docs, etc from the hard drive, just plug it in, find the time machine and what?

I have stored everything on my Macbook pro in a external hard drive (Time Machine) Now that we have "wiped the machine" I am told I can start it over and load ontent--apps, docs, etc from the hard drive, just plug it in, find the time machine and what? I need to know what to highligh, what to click on.

hirogliffix,
take a look at this Apple page — in particular, the “Restoring data from Time Machine backups” section and its “Restoring your entire system from a backup” subsection.

I always need to see the time counter on the music player, is that possible?

As a spinning instructor I need to see the time counter on the music player all the time. Now it dissepears after a short time and I need to touch it to see it again and that is not good! I also wish that it was bigger numbers on the counter so I easy can see how long time it's lest on the songs.
Ideas anyone?

By default the screen display will dim in about 20 seconds to conserve the battery. And I cannot find any setting to inhibit this function. I am afraid there is no way you can keep the screen bright and enlarge the numbers on the timer.

HT1178 I have set up Time Capsule to use with Time Machine. When I open Time Machine it 'cannot find' the Time Capsule and I have the Select the Disk each time. In the Next Backup tab it always says "When disk is connected" even though the disk is alrea

I have set up Time Capsule to use with Time Machine but when I open Time Machine it 'cannot find' the Time Capsule and I have to 'Select the Disk' each time. In the Next Backup tab it always says "When disk is connected" even though the disk is already connected.

Your pro doesn't matter.. I presume it is happily working.
Your imac setup has got messed up because you changed from a local (my book being USB type I presume) to network drive. Did you do a clean install of Lion?
Did you use the backup from the Pro on the imac? Otherwise I don't see how the Pro shows up in use previous disk. Where is Pondini when you need him??
You cannot download Time Machine as an App and replace the current version. It is built into the OS.. the only way to do it is a clean install. Unfortunately that might be the only way around the issue.
There is a number of issues that Pondini has covered in the setup issues of troubleshooting.
This is the most relevant I think. http://pondini.org/TM/B6.html
But look at the whole section B setup problems.
http://pondini.org/TM/Troubleshooting.html
If it was me, I would store all the info you need.. not using TM but using a straight copy of files.
Then clean install Lion. I doubt any of these issues would exist if you had not installed Lion over existing setup or used a different backup.
See if you can get Pondini to respond.. !!

HT201250 where can i find the time machine password

Where can i find the time machine password?

There is no such thing.
If you're backing-up to a network drive (Time Capsule, NAS, etc.), that drive may have a password.
If you're backing-up to an encrypted external HD, you'll need the encryption password.
Please clarify what version of OSX you're running (your profile says Leopard, but you've posted in the Lion forum), what you're backing-up to, and exactly what message you're getting and when (a screenshot would be fine).

How to find the Org.key based on Job key and Org Unit.

Hi,
Please Let me know how to find the Org.Key based on the Job Key and org Unit.
Regards
nagendra.

On recent ThinkPad, the Product ID Key sticker has been moved from the bottom of the unit to behind the battery.
You need to contact Lenovo technical support directly to ask about recovery media.

I have a thresholded image and i need to find the real area of the black region

i have a thresholded image and i need to find the real area of the black region.iam new to lab view.please guide me.i have attached the image..
Solved!
Go to Solution.
Attachments:
final.jpg ‏5 KB

Hello,
You have calculated the number of black pixels using a histogram, right? This is the simple part.
this is how i would approach the problem:
OPTION 1: calculate the linear magnification of your system, using the equation M = f/(f-d) = hi/ho. f is the focal lenght [mm] and d is the distance of the object from the lense [mm]. You can calculate the magnification by placing an object of known height (ho) at the distance d, and calculate the illuminated pixels (hi). Then multiply the pixels with the physical pixel size in mm. When magnification is know, you can always calculate the object size, based on the number of illuminated pixels. But this is only for the specified distance d. If the distance changes, the magnification changes also. If your area covers let's say 50 pixels, arrange it in 50 columns and 1 row. Calculate the object size using first 50 pixels and second using 1 pixel (if the pixel size in different in both directions, take this into account when calculating). Then multiply the calculated object sizes to get the area.
OPTION 2: calibrate the camera system in order to obtain the fx and fy [pix]. Calibration is really simple - use the NI Calibration training interface. Calculate the actual focal lenght in both directions:
fY[mm] = sensor_height[mm] * fy[pix]/sensor_height[pix]
fX[mm] = sensor_width[mm] * fx[pix]/sensor_width[pix]
Let's say that the area of the pixels on your image is Ap. Let's also say that we "arrange" it in Ap columns and 1 row. Calculate the actual object size in X direction:
OX[mm] = Ap * Pw[mm] * d[mm]/fX[mm]
and in the Y direction:
OY[mm] = 1 * Ph[mm] * d[mm]/fY[mm]
where Pw is the element sensor element size in horizontal and Ph in vertical direction [pix].
Then calculate the real-world area by OX*OY [mm^2].
You also need the distance d here - the previous post describes how to calculate this.
Also, hopefully, someone with more experience could comment on what i wrote above. Maybe there is a simpler solution? I am also learning stuff as i go, so any comment would be appreciated.
Hope this helps you get started.
Best regards,
K
https://decibel.ni.com/content/blogs/kl3m3n
"Kudos: Users may give one another Kudos on the forums for posts that they found particularly helpful or insightful."

To find the time required by the process chain to complete

Hi Experts,
I am calulating the average time required by the process chain to compete.
Is there any way to find the time required by the process chain to complete..
Thanks in advance.
Regards,
Ashwin

Hi,
There is a Tool provided by SAP to do the Process Chain Analysis.
It is basically a ABAP Program /SSA/BWT which provides the following BW Tools:
a)Process Chain Analysis : this tool is used to perform the Runtime analysis of the Process Chains. The analysis can be performed not only at Process Chain level but also at the Process Type level.
b)Detailed Request Analysis
c)Aggregate Toolset
d)Infoprovider BPPO Analysis
So you can go through the program and analyse the runtime of your Process Chains.
Regards,
Abhishek
Edited by: Abhishek Dutta on Aug 13, 2008 7:13 AM

HT201250 My MacBook Pro (using OSX 10.7.5) suddenly can't find the Time Machine backup disk, which is on the harddrive of my desktop iMac. What to do?

My MacBook Pro (using OSX 10.7.5) suddenly can't find the Time Machine backup disk, which is on the harddrive of my desktop iMac. What to do?

Inherit a Backup
Inherit a Backup (2)

TS2655 imac can no longer find the time capsule to add it...how do i fix this

my imac can no longer find the time capsule....i had to delete the old network and re add the time capsule to create a new one and now the imac keeps searching for the base and cant locate it

If you mean that Time Machine can't find the Time Capsule, I'd try using the Time Machine panel of System Preferences to redeclare your backup disk. If that's not what you mean, please explain.

Since I upgraded to Mavericks, Time Machine no longer finds the Time Capsule Disk on my network

Hi,
Since I upgraded to Mavericks, Time Machine no longer finds the Time Capsule Disk on my network.
Five minutes before upgrading it however performed successfully a last backup.
I found several posts on this forum and proposed solutions:
- restarted both the mac and capsule
- deleted the /Library/Preferences/com.apple.TimeMachine.plist (twice rebooting in between)
Still have the issue.

What brand of drive is it?
Disks You Can Use
Troubleshooting backup issues
Time Machine Can’t Find Backup Disk

Need to find the time spent based on condition

Similar Messages

Maybe you are looking for