Need to get missing file for Text Mining sample
I downloaded "Sample Code Demonstrating Oracle 10.2 supporting Text Mining (17MB)" (Oracle_MEDLINE_Text_Mining_Demo_v_2_2.zip) and managed to make it work with 11g database and apatch on linux. However, I get follow error
"Cannot open /var/www/htdocs/applet/my_KMEANS_cluster.html"
"Cannot open /var/www/htdocs/applet/my_KMEANS_cluster_data.txt"
File ../htdocs/applet/launch_KMEANS_stretchviewer.html needs above two files and I can not find it inside the downloaded zip file.
Can someone tell me where to get "my_KMEANS_cluster.html" and "my_KMEANS_cluster_data.txt" ?
Hi,
Sorry, this demo is no longer supported and we are in the process of removing it from OTN.
Thanks, Mark
Similar Messages
-
How can I get missing files for Classroom in a Book?
I bought Classroom in a Book for Premiere Pro CS 5 and some of the lessons are missing the audio/video that I need to complete these lessons. I know this isn't directly an Adobe problem, but I'd appreciate it if someone knew a place online I could go or someone at Adobe Press I could email to deal with this problem.
-- John Dorschner, Miami Shores FLHow is that some are missing and assumeably ..others are not?
Its a CD ROM isnt it?
http://www.adobepress.com/
(Contact Us bottom of the page) -
For a sales org, I need to get a file of all materials listed to each sales district.
Hi,
I'm new to SAP, so I figured that best way to learn is to ask questions. For a sales org, I need to get a file of all materials listed to each of their sales districts. They are trying to see how often some materials are repeated amongst the sales districts. Any advice? Can this even be done? They have many sales districts.
I appreciate any help that I can get on this one.
Thank you so much in advance!I think you are asking the question in wrong forum inside SCN, this is SAP business warehouse forum. You will have to shift this question to SAP ERP Logistics - Material management forum.
-
Do I need to buy Missing Sync for Palm to get memos to work
Do I need to buy Missing Sync for Palm to get memos to work for my palm? Every thing else worked just fine, but my Memo Conduit which is Disabled Conduits now.
BrianMemos using those conduits are stored in and access using the Palm Desktop.
I too think that the Missing Sync for Palm OS is a vastly superior way to synchronize contacts, events, memos, tasks and other data that iSync is, but you can simply restore Palm Desktop memo synchronization if that is all you want to do. -
Search file for text and delete the found text. How?
I need to know how to search a file for text and delete the found text. I think grep will let you do this but not sure of the syntax.
Hi Dmcrory,
In addition to what Camelot and nobody loopback point out, one must also consider the fact that UNIX text tools are largely line based. You also fail to tell us for what kind of text you are searching. If you are looking for multiple words, there's a very good chance of finding the expression wrapped onto different lines. With hyphenation, even single words can wrap to multiple lines. Tools that search line-by-line will miss these unless you use multiline techniques.
Multiline substitutions require that you write "read-ahead" code for the command line tool that you're using and that you take that into account in the substitution. Given how you want the results to be printed out, you may also want to preserve any newlines found in the match, which is even more difficult. That could bring up the subject of line endings but that's a completely different topic.
I apologize if this sounds discouraging. Multiline searches aren't needed that often and in most of those cases, exceptions can be dealt with by hand. I just didn't want you to get surprised by it. To give you an idea of how easy basic substitution is, have a look at Tom Christiansen's Cultured Perl: One-liners 102 and One-liners 101. Both have some "in-place" substitution examples.
Gary
~~~~
MIT:
The Georgia Tech of the North -
How to Get Missing Dates for Each Support Ticket In My Query?
Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'> -
I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. Even when I save it, the image quality at minimum the file size is 10.9 MB. What is the best way to do this
@Barbara – What purpose is that PDF for? Print? Web?
If web purpose, you could convert CMYK images to sRGB. That would reduce the file size as well.
A final resort to bring down file size is:
1. Print to PostScript
2. Distill to PDF
That would bring file size down even more. About 20%, depending on the images and other contents you are using, compared with the Acrobat Pro method. If you like you could send me a personal message, so we could exchange mail addresses. I could test for you. Just provide the highres PDF without any downsampling and transparency intact. Best provide a PDF/X-4.
I will place the PDF in InDesign, print to PostScript, distill to PDF.
Uwe -
how do i restore missing files for i work 09 as it is asking me to reinstall but cant find the disk?
Hello Jessica472,
It sounds like you need to recover some missing files but do not have access to the iWork '09 disc you used to install it. If you have a Time Machine backup and know what files you need, you can use the "Restoring specific files or folders" section of the following article to restore them:
Mac Basics: Time Machine backs up your Mac
If you do not have Time Machine, you will need the disc to reinstall the software suite.
Thank you for using Apple Support Communities.
Regards,
Sterling -
Itunes not working, get "missing file, reinstall itunes" message.
1. Itunes not working, get "missing file, reinstall itunes", message.
2. When try to reinstall itunes, gets as far as "starting services", then stops with message, "Apple mobile device failed to start. Verify that you have sufficient privileges to start system services."
I am logged in to my laptop as Administrator.
3. After selecting "retry" and "ignore" a few times, install went ahead and got "Congrats, you have successfully installed itunes"
When I went to itunes I got, " Itunes not installed correctly, please reinstall. Error7 (Windows error 126)".
4. On reinstalling itunes yet again, got, "Programme cannot start because MSVCR80.dll is missing. Try to reinstall programme"
Help !!!See if this post from turingtest2 helps : https://discussions.apple.com/message/24620553#24620553
There is also this user-tip for troubleshooting issues with iTunes for Windows from turingtest2 : https://discussions.apple.com/docs/DOC-6562 -
Where can i get transport file for bc400's template programs to import
hi
where can i get transport file for bc400's template programs to import to miniwas
would like to do the exercises for tw10 and tw12
regards
janThanks Spencer.
I downloaded it, etc. and that didn't work.
It actually seems to work the same way as before I downloaded that driver, meaning, it prints but leaves it in the "# Document Pending" status.
Since the wireless HP print server isn't working (No connectMgr.exe file) there's no connection and therefore the doc won't print.
RE: Print/Server software out of date. The software was working for many months after originally installing it on this laptop. Then it just stopped. Now it can't find the .exe file and that's odd.
If I could find that file I could just save it where it needed to be and I'd be good to go.
Thanks for the help.
Going to uninstall and reinstall again, just for fun. I'll report back.
J -
I need to get raw plugin for Canon 5D Mark iii for CS6 the adobe website has changed and I can not find the download.. it keeps looping me back to the product download page without the raw
Which operating system are you using?
Have you tried Help>Updates from within photoshop cs6 to get either camera raw 8.3 or 8.7.1, which should enable photoshop cs6 to open the canon 5D Mark III files.
(version of camera raw depends on your operating system)
If that doesn't work try one of the following camera raw plugin installers:
Camera raw 8.7.1 plugin
https://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html
If you have windows xp or vista or mac os x snow leopard (10.6.8), then you'll have to use the camera raw 8.3 plugin installer:
https://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html -
Hi guys..!!
I would like to know if someone could help on this:
I just have a HP printer (HP Designjet 100) and for some reason I need to install a file for all the HP printers drivers in total 590MB to be able to use my printer in my mountain lion???
If normally the size of my files in the for previous software was more or less 5MB why now i need to install 590?
Some one could help me how to avoid installation of 590MB for my new mountain lion software???
ThanksIf you go to http://support.apple.com/downloads and locate the HP Printer Drivers installer, you will find that it is 473.4 MB (for version 2.11). If you install this, it will install the full set of drivers for every model of HP printer that is supported by the drivers distributed through Apple. The disk space occupied once installed will probably be larger than the download, since the downloaded file is compressed.
On the other hand, if you have an HP printer connected and you use Software Update (or the Update tab in App Store), that should offer you a much smaller set of HP drivers, which are only applicable to your printer (and possibly a few similar ones). These updates are typically only tens of megabytes rather than hundreds of megabytes.
If Software Update doesn't offer you any HP drivers then it either thinks you have the latest drivers installed already, or the printer model is not supported by the drivers available from Apple.
This article lists all of the printer models for which Apple distributes the driver:
http://support.apple.com/kb/HT3669 -
Hard drive died. Cannot uninstall CS3 to remove copy registration. Need to reinstall on new laptop with windows 7 64 bit system, Need to get activation code for CS3 Web Premium.
Thank you Bob.
Just to clarify - in terms of backing up one set of these, would that just be so I had it on disk and didn't need to re-download from Adobe if the installation got corrupted somehow? Or do I need a backup for some other reason?
Thanks -
I need to download installation files for my Adobe Acrobat Standard 9.5.5.
I need to download installation files for my Adobe Acrobat Standard 9.5.5. There are no links to be found for this version on the adobe site..
I have two licenses for adobe acrobat, but cannot find my software. Any help with a direct link to the standard version would be helpful.
The professional version does not work with the standard licens.if you purchased from adobe, log in to your account and check your order history, https://www.adobe.com/account.html
if you acquired via dell, https://smartsource.dell.com/
if you purchased elsewhere, contact the vendor. -
I'm thinking of buying an iPad. Can I use my home's wifi or do I need to get a plan for it?
Another thing to note is that if your cell plan/carrier supports it (it's free with Verizon Shared plans), you can also use your mobile phone as a mobile hotspot (Personal Hotspot on iOS devices) and use your phone's data to access the internet on the iPad. I purchased an iPad 3 with Verizon 3G/4G cellular built-in but have never activated it. I instead use Personal Hotspot with my Verizon Wireless cellular (phone) plan. If you go this route, you can save money over purchasing a Wi-Fi/Cellular iPad and just choose the Wi-Fi model. But also realize that if you choose to at some point to use the iPad when you're away from Wi-Fi, you won't have the built-in cellular capability that a Wi-Fi/Cellular iPad would have.
Maybe you are looking for
-
SPLITTING MORE THAN ONE LINE ITEM IN ECC6.0
Hi everyone. I am using New GL functionality in ECC6.0. I have a big question regarding multiple objects splitting. Ej: Purchase of a service. If I set one cost centre in the expense line item, the profit centre and segment are determined automatical
-
Can JRE for Sun One Java Directory Server 5.2 be upgraded to JRE 6.0 Update
I am trying to upgrade jre installed with Sun One Java DS 5.2 from 1.5.0 to JRE 6.0 Updat 16. Is this possible?
-
SQL Server 2000 and JDBC,Registering cursor as OUT param
hi I am using JDK1.4,SQL Server 2000 and Microsoft's JDBC driver. I am stuck in accessing cursors. The SP i wrote is USE pubs IF EXISTS (SELECT name FROM sysobjects WHERE name = 'spSelectEmployees' and type = 'P') DROP PROCEDURE spSelectEmployees GO
-
Terrible performance of applet with firefox & appletviewer (not IE)
I'm working on a worm game with the help of a book on the subject. It's not finished yet, the worm can only move around & stop when hitting a wall. Now as I add the g.drawImage(blahblah) to the paint-method, the performance gets terrible, the mouse r
-
Sap best practices - payroll international
hello experts, Pls forward me the path of SAP Best Practices for international payroll or mail me [email protected] it is very urgent...... thanks ram