For a sales org, I need to get a file of all materials listed to each sales district.

Hi,
I'm new to SAP, so I figured that best way to learn is to ask questions. For a sales org, I need to get a file of all materials listed to each of their sales districts. They are trying to see how often some materials are repeated amongst the sales districts. Any advice? Can this even be done? They have many sales districts.
I appreciate any help that I can get on this one.
Thank you so much in advance!

I think you are asking the question in wrong forum inside SCN, this is SAP business warehouse forum. You will have to shift this question to SAP ERP Logistics - Material management forum.

Similar Messages

I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. What is the best way to do this

I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. Even when I save it, the image quality at minimum the file size is 10.9 MB. What is the best way to do this

@Barbara – What purpose is that PDF for? Print? Web?
If web purpose, you could convert CMYK images to sRGB. That would reduce the file size as well.
A final resort to bring down file size is:
1. Print to PostScript
2. Distill to PDF
That would bring file size down even more. About 20%, depending on the images and other contents you are using, compared with the Acrobat Pro method. If you like you could send me a personal message, so we could exchange mail addresses. I could test for you. Just provide the highres PDF without any downsampling and transparency intact. Best provide a PDF/X-4.
I will place the PDF in InDesign, print to PostScript, distill to PDF.
Uwe

Validation table for region/sales district/postal code combination

Hi Folks,
Is there any validation table for region/sales district/postal code combination? As I am looking for some standard functionality where a user if puts a wrong zip code/ postal code for a specifc city or country while creation of customer master then system should not allow and throws any kind of error or warning message.
Please let me know if there is somethiong like this.
I have some failt idea that we have something in standard SAP where we get a pop warning where postal code-country and postal code-city combination does not exist.
Please let me know the transcation code and table name for that.
Thanks and cheers,
Sandy

Hello,
I'm not aware of any settings for this which include sales district. For the rest a few spots to look at:
-SAP NetWeaver>General Settings-->Set Country-Specific Checks (some controls for postal code per country)
-SAP NetWeaver>General Settings-->Set Country-Insert Regions (country to region ties)
---Flexible Real Estate Management >Address Management>Regional Structure/City File-->Cities (have not worked with this area but you'll see several nodes for dealing with cities here).
Hope this helps.

HT4863 How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

You can't change it, and I suspect few email providers would allow a file that big. Consider uploading it to a service like Dropbox, then email the link allowing the recipient to download it.

I just bought an iMac now running OSX 10.8.4. I have a G5 running OXS 10.5.8 - External HD connected to the G5 been using Time Machine to back up. Need to get my files, photos etc. but not applications etc. onto the iMac. How do I do it?

I just bought an iMac now running OSX 10.8.4. I have a G5 running OXS 10.5.8 - External HD connected to the G5 been using Time Machine to back up. Need to get my files, photos etc. but not applications etc. onto the iMac. How do I do it?

David JHS21 wrote:
Can I just plug the external hard drive into the iMac and copy the "Documents" and "Pictures" from the hard drive to the iMac?
Not those whole folders, but their contents, maybe.
If the user account now on the Mac has read rights to the user account(s) on the backups, yes. If not, you may have to do some finagling.
Try the Browse Other Backup Disks option, per Time Machine - Frequently Asked Question #17. If you find an account that can open those folders, restore what you want to an alternate location (#16 in the FAQ).
If not try creating one or more accounts temporarily.

Expired certificate for IIS services. I need to get this renewed for servername .Domainname.local

The sbs2011 Server is not longer receiving external emails. I have a expired certificate and need to get it renewed correctly.....but I'm unsure of all the choices it asks for.
Need some help here.

Open Exchange power Shell and type
Get-ReceiveConnector | FL
Share the details.
Also, Basic troubleshooting first :
So if you do telnet from external machine to port 25 on server do you get a banner?
telnet remote.domain.com 25
It should return something similar :
220 servername.domain.local Microsoft ESMTP MAIL Service ready
You can do a telnet on the server itself and one from the outside and compare, if they are not the same or the router / firewall is routing to the wrong server or it is corrupting the response.
Assuming its Self Assigned Certificate - To reissue Self Assigned Certificate follow :
http://blog.the-it-blog.co.uk/2013/01/25/re-issuing-a-self-signed-certificate-for-exchange-sbs/
Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

I need to get a file out of my documents to a colleague but can't email or save it to an external hard drive....what do I do??

I saved a document on my MacBook Air and need to save it to an external hard drive. I've also tried emailing the document, but it was not successful. I need to get this document to a colleague ASAP but cannot get it out of my documents. Please help!!

I tried dragging and dropping but it won't do it (or to a USB thumb drive). I was finally able to email it, but I still need to get it to my external hard drive. Think I will be taking it to an apple store. Thanks for the help!

Need to get imovie file to VHS format.

I did some wedding footage for a friend and she needs copies of the final movie on video tape as well as dvd. How can I easily get the file copied to a video tape?
I have a formac converter, but don't know how to get the connections to tape FROM the computer.
any help very much appreciated...
-James

Hi James:
Welcome
You can use the DV camera that it was taped with as a pass thru to the VHS.
*Plug the camera into the wall (don't use the battery for this)
*Connect camera to mac with 4-pin to 6-pin Firewire cable
*Connect camera to VHS with RCA Jacks
*Be sure camera is recognized by imovie (if so then the camera is on and set to Play mode)
*"Share" to camera
When it starts to share to the camera, hit record on the VHS recorder. That way you have a clean copy on the DV tape as well for future iMovie editing if desired.
Sue

Need to get large file sizes down to downloadable sizes-how?

I am using Compressor 4 and have several professional videos I produced with Final Cut Studio in QuickTime/.MOV format using ProRes 442. They are all 720p and of course, all have large file sizes. I needed to convert them so they are compatible with iTunes as well as Apple devices (AppleTV, iPad/iPod/iPhone, etc). They also need to be downloadable in a reasonable time and I of course want to maintain a quality image. Several of the videos are about an hour long, some a little more.
I an unable to get most of these files to be small enough for practical download and still maintain an acceptable quality. For example:
I have one video (QuickTime rendered from FCPS) that runs 54 minutes. 1280x720, ProRess 422, Linear PCM with a Bit rate of 72.662. The best I seem to be able to get out of compressor is to use the setting options for "HD for Apple Devices (5 Mbs)" which gives me a file that's just over 2Gb. Not bad, and the quality is still very good, but the file size is just too big for people to download. I get reports of people getting estimates of 77 hours to download this one file.
I did try using the setting under Video Sharing Services / Large 540p Video Sharing just to see what it would give me, but it really wasn't that much smaller and the quality was noticeably degraded.
I'm confused as to what to do about this. I have downloaded things from iTunes before that are good quality, about an hour and their file sizes are simply bnot this big.
Can anyone give me some advice? Thank you. Grateful for anything you can offer.
MC

If you're not concerned with precise average bitrate, use h.264 codec, set bitrate to "automatic" and use the quality slider. Be sure to have "keyframes" on "automatic"; every 24 frames or so makes h.264 quite inefficient and is only useful for live-streaming, where you want people to be able to resynchronise as quickly as possible. Having multi-pass enabled might help, but I'm not sure what it does when using constant-quality encoding.
Do a test-encoding of a representative clip of maybe about rwo minutes or so, play with the quality slider and see how far down you can go and still be satisfied with the quality. Using "automatic" bitrate uses as many bits to encode each frame as is necessary to get the required quality, and file sizes will vary depending on the type of material. Complex textures and high motion will use more bits, still frames and slow pans will use very little.
A light chroma-channel denoising may help improve perceived quality, as may very light sharpening in case you scaled down the material.
If you're still not happy with the bitrate vs. quality tradeoff, try reducing the resolution, but generally you should get 720p down to around 2.5 to 3.0 Mbps with adequate quality.
On the other hand, If someone needs 77 hours to download 2 GB, they have another problem anyway. That sounds like a 56k modem connection. What's he doing trying to download HD content anyway?
Bernd

Authorization for Accounts(Sales district) and Sold-to parties

Hi Experts,
I have a requirement where I wanted to restrict Sales districts(Accounts) & Sold-to's depending on the employee responsible for.
The requirement goes like this.
There are Sales districts. Each Sales district has around 4 to 5 Sold-to parties.
For each Sales district a sales manager is responsible, and for each sold-to party a sales group is responsible.
Now when a manager logs in using his logon credentials then he should be able to see only the sales districts(Accounts), he is responsible for and the sold-to parties for that particular Sales district(Account).
But when a sales group logs in , he should be able to view only his sold-to parties, which he is responsible for.
Any clue on how to achieve this requirement.
I have used CRM_ORD_LP, CRM_ORD_OP & CRM_ORD_OE but they are related to actvities, leads & opportunities authorization objects.
How about Sales districts (Accounts)? How can I restrict it to Sales districts(Accounts) for managers and sales representatives?
Thanks in advance.
Rohan

If you don't need to restrict access to all customers but only to propose customers assigned to certain salesman you could probably do it via partner determination rule where you would say when the employee responsible is entered in sales document that customers belonging to this salesman are proposed on selection screen.
If you need to restrict it then I think you have 2 choices:
- use ace to restrict by sales district
- create Authorization Groups, assigned them to customers and then create pfcg roles for salesman providing in pfcg access to certain Authorization Group. in pfcg you use B_BUPA_GRP object. But the problem using pfcg is that you will have to create as many pfcg roles as many salesman you have and this can be a huge thing.
So ace will probably be more appropriate.

Iphone and computer died, need to get the files from hard drive

Iphone and computer died at the same time, my hard drive on the computer is ok, i did a external connection of my hard drive to my laptop, my iphone was backed up on itunes on the computer which are on the hard drive, how do i extract contacts and other files from the hard drive thanks

If the old drive is not accessible then, no, you will not be able to access all your files on it. In this case you may need to look at the following:
Basics of File Recovery
Files in Trash
If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten with recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

Select Options for my program and i need to get the code from coding wizard

Hi Experts,
i am new to Webdynpro programming.
i want to use Select-options in my component. and also please tell me how to use coding wizard,
Please let me know if you need any information.
Thanks in advance
Lava.

Hi Lava,
To create select options we have to use the existing component WDR_SELECT_OPTIONS.
For using this component in our WebDynpro component we need to specify this in used components tab in our WebDynpro component.
check the standard components WDR_TEST_SELECT_OPTIONS .
Also refer the following links.
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60811d03-b69e-2b10-cd86-ad2790e44ecc]
Saptechnical->tutorials->webdynproabap->select options
Regards,
Radhika .

Need to get missing file for Text Mining sample

I downloaded "Sample Code Demonstrating Oracle 10.2 supporting Text Mining (17MB)" (Oracle_MEDLINE_Text_Mining_Demo_v_2_2.zip) and managed to make it work with 11g database and apatch on linux. However, I get follow error
"Cannot open /var/www/htdocs/applet/my_KMEANS_cluster.html"
"Cannot open /var/www/htdocs/applet/my_KMEANS_cluster_data.txt"
File ../htdocs/applet/launch_KMEANS_stretchviewer.html needs above two files and I can not find it inside the downloaded zip file.
Can someone tell me where to get "my_KMEANS_cluster.html" and "my_KMEANS_cluster_data.txt" ?

Hi,
Sorry, this demo is no longer supported and we are in the process of removing it from OTN.
Thanks, Mark

Need to get the file name at the time of polling

Hi...
I am transferring the data from csv file to database.
I put the file in a directory. File adapter will read that file for every 2 minutes. I have a column name in database to which I need to map the incoming file name.
Here my requirement is: how can I get the name of the csv file dynamically at the time of polling, so that I can map the file name to corresponding column name in database. Is there any special mapper function in Jdeveloper component palette to do it or can we do some thing with the file adapter to achieve this.
Thank you very much...any help is appreciated.

This is a very simple task in JDeveloper 11g, file adapters are linked to the receive activity, here there is a tab called Properties which you can use to extract the file name. Please follow the steps below:
1. Create a Simple Type variable of string type, call it fileName_var or any name you wish.
2. Open the Receive activity in your bpel project.
3. Scroll down to jca.file.FileName and double click on the value column, click on the browse button (...), select Variable, then click the search icon
4. Locate your recently created variable
5. Now when your project runs it will assign the file name to this variable, you can use this same approach also to pull the directory, file size, etc.
Please note, that you may see a warning little icon on your project saying variable is not initialized, this is perfectly ok and it does not represent any issues when deploying the project.
Hope this helps.
Jhon Castro

Need to get .MOD files (video) working on mac any ideas

hi all,
I need to play some .MOD files (video) on my mac. Window media player 10 and 11 play the files but mac only has media player 9 - is there any other way i can get these .MOD files to play?

First is that you've posted on the "Windows" side of the Discussions pages but claim to use a Mac.
The .MOD file extension is really MPEG-2 format and you could just change from .MOD to .mpeg to view the file via QuickTime Player.
But MPEG-2 also requires the MPEG-2 Playback Component ($20) to be viewed in QuickTime.
If all you wish to do is view the files you can do that for free using VLC Player.

For a sales org, I need to get a file of all materials listed to each sales district.

Similar Messages

Maybe you are looking for