Need to integrate SAP MDM 5.5 with BW

Hi,
I am working on SAP MDM for last 4 months.
I don't have any knowledge of BW.
I need to integrate SAP MDM 5.5 with BW.
I have checked with SAP R/3 SAINT transaction
that MDM_TECH 555_700 is installed.
Now, I have created logical connection with MDMAPI transaction.
I have created an file named allow.ip and saved this in
C:\Configuration.
In allow.ip, I wrote the ip address of R/3 System.
I didn't create any deny.ip.
In MDS.ini , I have given location.
TrustFiles Dir=C:\configuration
Now, I have to find the OHD from BW.
I need to see how?
First of all that logical connection is not working.
There is a Connect Function module mdm_accessor_connect .
Here we have to give RFC target system.
Now I created a RFC target system.
I created a type 3 ABAP based RFC target system.
Would it be TCP/IP based system?
Here is the step where my Logical System creation failing.
How to get the OHD Connection object from BW System?
Regards
Kaushik Banerjee
Edited by: Kaushik Banerjee on Sep 22, 2008 11:33 AM

Hi ,
It is possible to transfer data directly from BI to MDM without using XI.I have worked on the same scenario.
Below is the link which will help u .
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e01d1085-5a51-2a10-2292-b52eb7500180
But u need to take BI"s help to do so.
MDM BI Integration using ABAP API
Hope this is helpful

Similar Messages

Integrate SAP ERecruiting Newhire/Rehire with SAP HCM Process

How to integrate SAP ERecruiting Newhire and Rehire with SAP HCM Process and forms using SAP NetWeaver PI 7.3 , Could any one give me steps or docs..

I think standard content available in market place if no then try with Web service (sender side) and Proxy in receiver side,

Procedure to Integrate SAP PI 7.1 with Teradata and IBM Data stage

Hi,
We are integrating SAP PI 7.1 with Teradata and IBM Data stage for retail customer.
Please provide the following information.
1. What are the connectors available in Teradata and IBM Data stage
2. What type of output/input, Teradata can give/take from/to SAP PI
3. What type of output/input, IBM Data stage can give/take from/to SAP PI
4. How to handle Bulk uploads between SAP PI and Terdata, SAP PI and IBM Data stage
Thanks,
Ramesh

Hi Ramesh,
Could you get answers for your queries. We have Teradata 13.10.2 in our landscape and I have exactly same queries that you asked. Can you possibly share your experience in this area.
Anand.

SAP MDM Import Problems with Oracle

Hi,
I've installed the MDM 5.5 today in my system landscape. Server and Tools are all installed, no problem.
After importing data from MSAccess-databases, XML-sheets and excel-sheets, i tried to import data from a oracle-database. But the ImportManager couldn't establish a connection to the dbms.
Probably i got the wrong configuration values in the "connect to source" dialog.
DBMS Server: 192.168. *. * //Server ip where Oracle is installed
Database: addressesdb
User: * //has all rights
Password: * //verified it
Maybe somebody can help and tell me whats wrong. Do I have to add a port or complete Database URL?
I didn't find an example in the Import Manager Reference Guide.
Thx a lot.

I'm having the same problem as Andreas. I can connect to a specific Oracle database using several different client applications, but get the same errors Andreas did when attempting to connect via MDM Import Manager.
I also tried using the ODBC connector, but that has been just as fruitless. I have a dsn file that I use to connect to the above Oracle database from other client apps, but MDM IM gives the following error message when I ty to connect:
Login Error:[Microsoft][ODBC Driver Message]Data source not found and no default driver specified.
I do not get this error in any other client apps. I tried both with and without the .dsn extentsion. I also tried giving the full path to the dsn file, but then I get a "source name too long" message.
Has anyone else successfully imported from Oracle -- either directly or through an ODBC connection?
Thanks,
Vince Moore

SRM 7.0 on NW 7.01 with SAP MDM 3.0 Catalog

Hello,
We are implementing the following Components:
SRM 7.0
MDM 7.1
BI
PI 7.0
Portal 7.0
We are currently live with ECC 5.
We will be using the SAP MDM Catalog along with SRM. We will be also implementing MDM to use for Master Data Cleansing. I wanted to know whether we will need to install the SAP MDM Catalog on the SRM7.0 system or can we install it on the MDM 7.1 system and then connect it to SRM?
Any pros/cons if we can use it as part of the MDM landscape?
Thanks in advance.

Hi Sheldon,
Great question. Technically speaking, you can certainly use your SRM-MDM repository on the main MDM 7.1 system. However, the following cons apply:
1. Even though it contains several core components from Netweaver (NW) MDM, SRM-MDM Catalog is being developped by SAP as a separate product. The patch releases between SRM-MDM and NW MDM are also not in synch (at least that's the current situation). Therefore, if you have both applications on one MDM system, you will have an undesired dependency related to applying new patches - which may lead to some issues.
2. Performance of one application will be impacted by the load on the other one.
3. Down time of one application will impact the users of the other one.
4. Upgrades will be more difficult to handle.
On my recent project, the direction from SAP was to use two different systems - one for SRM-MDM, one for NW MDM.
Cheers,
Serguei

Need connectivity of SAP Oracle with Third Party tool with dsn

Hi Friends,
We need to access SAP's Oracle database with third party tool with the help of dsn creation. For that we need to create 2 staging tables and need a new segment for these tables. Our data will move from SAP transactions to these 2 tables and we want to fetch this data via dsn into another third party S/W.
I am unaware of such kind of working, can you please help me how to create new segment and how to create dsn for accessing tables in this segment.
Our requirement is as follow.
The staging tables are required in the SAP database with user name and password. The user should have all access to the staging table only.
Requesting your kind help on this issue. Please suggest for further processing of activity.
Rgds, Krishan Raheja.

Hi,
Common way to integrate SAP (database) with third party Application is to use and implement SAP Connector (Java or .Net).
Using this, you can fetch the data from SAP database to use it in Third party application.
As per my understanding the method you mentioned, will void the SAP database license term.
So Please check before doing such configuraiton. Also that method is NOT recommended..
Regards.
Rajesh Narkhede

Integrate SAP Netweaver 7 with SharePoint 2013 for SSO

We are planning to Integrate SAP Netweaver 7.0 with SharePoint 2013 for SSO using SAML 2.0
Would like to know what 3rd Party IDM tools are supported by SharePoint 2013 apart from ADFS
Regards
Mirza
FBM

This should help you Faheem
http://scn.sap.com/community/interoperability-microsoft/blog/2011/01/31/installing-duet-enterprise-the-sap-side--a-video-guide
Please remember to click 'Mark as Answer' on the answer if it helps you

I am trying to integrate EBS 12.1.3 with Enterprise Manager 11g

HI Experts
I need to integrate EBS 12.1.3 with Enertprise Manager 11g grid control.
I have applied patch 8333939 to my OMS Instance successfully.
But I am not able to apply the same to my agent home.
I am following this doc.
http://docs.oracle.com/cd/E11857_01/em.111/e18708/T506934T511454.htm
I need to deploy patch 9757683 to my agent home.
Also silent installation is not working.
Please advise.
Thanks
Vsyed786

I see this error in your output:
2014-11-26 10:55:23,583 ERROR [ThemeAutoDeployer]
java.io.FileNotFoundException: /tmp/liferay/com/liferay/portal/deploy/dependencies/liferay-theme.tld (Too many open files)
I'm not across what the EBS recommended setting for this is, or if there is one. But try running:
ulimit -n
... and if the number is low, edit /etc/security/limits.conf , add some entries for increased "soft nofile" and "hard nofile" and run sysctl -p. See Linux & Java tips: Too many open files .

SAP MDM Implementation Methodology and Architecture

Hello,
I wanted know what are the standard approaches for MDM architecture and MDM Implementation:
MDM Implementation phases:
what are standard phases recomended by SAP?
Architecture:
what are different mdm architectures that an Enterprise can think of?

Hello SudhaViz
SAP MDM can work as independent solution for master data management.
SAP MDM has own servers( MDM Server, Import Server, Sysndication Server, Layout Server, and user application s for server management and master data management.
SAP MDM can work with different RDBMS like as Oracle , MS SQL, My SQL, DB2.
Here is good presentation about SAP MDM and it's business scenarios:
http://www.sdn.sap.com/irj/scn/index?rid=/media/uuid/0030d731-65ac-2d10-6197-d64f34811d94
Here is detail documentation :
http://help.sap.com/saphelp_nwmdm71/helpdata/en/mdm_index.htm
Regards
Kanstantsin Chernichenka

Integrate SAP Portal within another intranet

We need to integrate SAP Portal within another intranet portal. The question is if technically, it's possible integrate SAP portal to display within a frame that is not the top frame of the window.
I had this same problem on another project and was not possible because the SAP portal needs to take the entire window (the reason is how it is implemented).
Could anybody confirm it?

You can integrate the SAP Portal in another portal. To do so, integrate it by an iFrame.
To not show the whole SAP Portal navigation in the target portal, go through these links:
Embedding Enterprise Portal content in another webpage
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/4a3addc4-0501-0010-bfbb-9cdd29581adf
You'll need to make a small configuration of your SAP Portal - that is: adding a new alias.
br,
Tobias

How to Integrate Oracle Projects(EBS-R12) with Primavera P6

Dear All,
As i have a requirement that i need to *"Integrate Oracle Projects(EBS-R12) with Primavera P6 for Oracle Projects Accounting ( Costing & Billing ) using Application Integration Architecture(AIA-PIP)"*.
So kindly suggest me to do the same.
Thanks in advance for your valuable suggestion.
Regards,
Saravanaa

Vishal, I would recommend that you post this question on the CRM On Demand Integration Development forum.

Using Java Web Dynpro iViews to integrate with SAP MDM

Hi,
I have already SAP MDM 5.5 supplied iViews with Enterprise Portal.
These include itemDetail iView, ResultSet iView, PicklistSearch, Hiearchy Search.
Now, I am integrating Java Web Dynpro iViews with SAP MDM.
When adding the fields using object of ResultSetDefinition Class, should we use MDM Table Name or MDM Table Name Code/MDM Field Name or MDM Field Code?
I think we should use the CODE as the name as it does not contains any space while working with Java API.
Regards
Kaushik Banerjee

Hi Kaushik ,
Yes you should use the Field and Table CODE when integrating MDM with any other system using API either Java, Abap or Com api.
Actually this is one of the main use of the code in MDM .In API.
Hope It Helped
Thanks & Regards
Simona Pinto

SAP MDM Joining tables in console? Help needed.

Hi,
I am placed in SAP MDM Project.
Currently, we have an unique requirement.
We, have to join two tables of SAP MDM Console in an unique field
named(House No and PO Code).
Actually, we have a main table named Business Partner and a Flat table
named Address.
Now, we have a field named House No and PO Code(Business Partner) which I have made as unique.
Also, the Field named House No and PO Code(Address) is unique.
Now, my colleague suggested if we can make remote key mapping at the time of import
it will automatically populate the address data for each individual.
But it is not true. Remote Key mapping is a different concept.
If Remote key is mapped with any field of the Main table.
It will show remote key mapping for that field with a remote system.
When data is syndicated back after modification same data is reflected in that remote system.
Only thing that we can do is that make House No and PO Code (Business Partner) as Lookup(Flat) field and it is mapped with the Flat table Address.
Now, the SAP MDM Data Operator needs to select the address manually from say 10,000 address records for a person George Smith in main table(Business Partner).
No other way round.
Please suggest if there is any other way.
Thanks and Regards
Kaushik Banerjee

I am closing it.

How can we integrate SAP R/3 4.6C with SAP EP?

Hi All,
we are implementing PM (Plant Management) module of SAP R/3 4.6C and we have the necessity to create web services for some PM functionalities. Infact we need to integrate our SAP R/3 4.6C with other applications (non-SAP) through TIBCO (it's mandatory). So we think to use SAP XI. Moreover our users don't want to use SAP GUI for the accessing to the PM functionalities but they want an UI more friendly. So we think to use SAP EP. How can we integrate the SAP R/3 4.6C functionalities into the SAP EP?
Thank you in advance for your help.
Best regards,
Bob

Hi Bob,
Upgrading to ECC 66.0 wouldn't effect your Developments (since everything will be custom, and upgrades will not effect the custom applications) and Customizing (there will be enhancements based on which you do customizations and even that will not be effected with upgrade) unless you change the standard using Dev Key.
[https://wiki.sdn.sap.com/wiki/display/ERP6|https://wiki.sdn.sap.com/wiki/display/ERP6]
Please go throught the link for all the details on upgrade.
And you need to see whether there are applications available in WebDynpro for ABAP or Java for your req. and these you can find in latest BP for PM if there are any?
Hope this helps.
Cheers-
Pramod

Brief discussion on SAP XI and its' Integration with SAP MDM.

Hi,
I have never worked on SAP XI.
I am discussing it on brief, please give your valuable replies.
SAP XI consists of System Landascape Directory(SLD).
SLD Consists of Business System and Techinical System.
Technical System contains all information about the software
component. The Business System consists of Inbound and Outbound Business
System which are used as logical names for data transfer.
There is communication Channel for Receiver and Sender Business System and n agreement
is signed between Sender and Receiver.
Outbound Interface defined for Business System Outbound and Techical System associated
with the Business System,
Inbound Interface defined for Business System Inbound and Techical System associated
with the Business System.
In SAP NetWeaver XI Integration Directory, we have defined the Integration Scenarios,
Actions, Interface Objects, Mapping Objects, Adapters Objects.
Mapping Object defines the Structure and Value Mapping.
Adapter Objects defines the Adapter program which implements RFC Adapter, FTP Adapter logic.
FTP Adapter is used for XI-MDM Communication.
RFC Adapter is used for XI-ECC Communication.
Integration Repository: Both Outbound and Inbound Interfaces are Mapped with Value mapping and
Structure Mapping inside Integration Repository.
The File Adapter takes the File from the Outbound port of MDM System
and sends it as IDOC to Receiver Business System.
Value Mapping must be done between Sender and Receiver interfaces.
Value Mapping is done by XSLT or Java based program.
SAP NetWeaver XI Integration Server at runtime:
Message Split, Interface Determination, Receiver Identifaction, Mapping, Techincal Routing
and Call Adapter Proccess are done.
In SAP XI 3.0 and MDM 5.5:
Step 1: Create busines system as service.
Step 2: Create communication channel for each business service. If the system can communicate
through different channels, then create all possible channel types if necessary.
Step 3: Create receiver agreement between the systems.
Step 4: Interface determination:
- Here you see for the first time the software component mentioned;
there are some special requirements regarding this software component in relation to the customizing ID mapping.
- To modify this software component, the customer needs to copy the SAP standard delivered software component
into its own namespace. The customer is able to modify to create archives
for the customized ID mapping.
Receiver determination.
Configure an FTP Server on the MDS.
Create a send folder for outbound messages using outbound port(s) for
remote systems(s).
Create receive folder inbound messages using inbound port(s) for remote systems.
This ia all about concept of SAP XI Infractsture and its' Integration with SAP MDM 5.5.
Regards
Kaushik Banerjee

Hi Kaushik,
You must be aware of File types that MDM Import Manager can Import i.e. we have XML, Excel etc. Now there are two transactions to extract data from R3
1. MDMGX -
         - For lookup table extraction
         - Output in XML format which MDM can import without using XI.
          - FTP can be configured to put the file in the desired folder which will be then picked by Import Server.
2. MDM_CLNT_EXTR -
          - For Main table records.
          - Output is in Idoc format which MDM doesn't understand hence we need XI in between which converts Idoc file received from R3 into XML which can then be imported using Import Manager or Import Server. For this we need to implement XI Scenario that consists of Source System, Receiver System, Type of Data etc.
Just a basic understanding...
Regards,
Jitesh Talreja

Need to integrate SAP MDM 5.5 with BW

Similar Messages

Maybe you are looking for